How to build a redundant fiber optic ring

Similar Questions

• 55VL900A and BDX4300KY - TV is not output Dolby Digital fiber optic

  Just installed my new TV, 55VL900A - great picture, very happy. I have a BDX4300KY a drive blueray and Foxtel connected to the TV via HDMI.

  The TV has audio output optical fiber, which I run for my Yamaha DSP - A1 amp.

  The Blueray and Foxtel are defined to pass on Dolby Digital through HDMI.

  Problem 1: TV does not have Dolby Digital of the fiber optic connection.

  Problem 2: If I run audio blueray or foxtel fiber optics directly to my amp, there is a sync problem. The audio is delivered earlier than the image.

  I searched and found no results in my manual, or in the forum. Help, please.

  Thank you, Mike.

  Hello

  I put t have the same devices at home, but I use the optical cable for sound. It is connected to my blue ray and Technichs amp player. I use 5.1 home theater connected to the Technics. The sound is perfect.

  I put t know how it works on TV Toshiba but check please if something should be enabled there.
  > The TV does not have Dolby Digital of the fiber optic connection.
  See s operating manuals and do not forget the optical output must not be activated. Optical cable is connected to the amp in the optical port marked as TV in the back? Don't forget that bulks is set to TV chanel when you want to hear the sound of the TV directly. In my opinion, it should be best option for you if you will be able to make it work.
  > If I run audio blueray or foxtel fiber optics directly to my amp, there is a sync problem. The audio is delivered earlier than the image.
  Which is really strange. Can you please test it with cable audio normal cinch? It will be interesting to know if the same problem occurs again.

• new update of Apple Watch doesn't have My Watch tab. I can't understand how to set up friends or family ring

  I updated my Apple Watch with the latest version of the software that is 10 IOS. But the last update did not My Watch tab in the settings. I can't understand how to set up friends or family ring? Any help on this will be appreciated.

  Hello

  IOS 10 (as in the previous version of iOS), My Watch tab is located in the application of the watch (not in the settings).

  If you have also updated your Apple Watch to watch OS 3, note that the application of friends (accessed via the side button, with a circle of people) has been removed from the watch and that there is no direct replacement for this feature.

• I have an iPhone 6 and use Verizon as my server. How can I increase the number of rings until it goes to voicemail?

  I have an iPhone 6 and use Verizon as my server. How can I increase the number of rings until it go to voicemail?

  You can not. There is no adjustment to make on a phone. In fact, it is not based on the number of rings, it is a problem of synchronization based on the parameters of the call. You can contact Verizon to see if they can increase at that time here, but even if they can, it won't be much, only a few seconds if they do at all.

• How to build a table of TDMS file open

  Hello

  Examples NI TDMS - Express write data .vi (time domain), I can build a PDM file with 2 channels (sine and square waveforms) data, which are stored as test.tdms.

  Using Express read .vi data (time domain), 2 channels of waveform data are read. How to build a table later? How to separate the 2 channels of data in the tables 1-2 and manipulate the data using table functions?

  For example,.

  I want to collect 100 from index100 between channel 0 and their average. I want to take 50 samples from the channel 50 1 index and double each element.

  Thank you for your help.

  Bing@NCL

  Hey Bing.

  You can perform operations on different channels in the 2D table using the table to index. This will allow you to choose the channel to operate on, then you can perform the operation inside a loop on each element. In the included code snippet, I used a shift register to find the total cumulative values in channel 0 and then divided by the number of samples.

  I recommend you read some tutorials LabVIEW and bases of knowledge on topics that are related to yours. These could help a lot.

  I hope that my suggestions help,

  Chris

• How to build a table using incoming data stream?

  I'm programming in VBAI but use LV as my Interface of Inspection. The VBAI program will go into a finite loop (x 1000) and the digital indicator with dbl vaule of food in front of the LV Panel if the value double is in order.

  In LV, how to build a table (index 0-999) with this stream?

  
  

• fiber optical sensor su19 110 115 a 126 vs nor usb 6008

  Hi expert... I am looking for idea or help on my project. I try to get the measure of mention nor USB 6008 sensor output. In fact, I'm new with nor peripheral usb n still study n the search on internet or n. forums I found an idea to connect the sensor by aoi, but I can't seem to get a measurement any. Is the sensor can connect directly to the device usb or need some custom wire diagram between them. Thanks in advance

  First of all, it is useful if you name the manufacturer of the sensor. A single part number means nothing to most of us.  You use the sensor fiber-optic Pepperl + Fuchs? Even better is to display the technical/manual plug of the sensor or links to them.

  The data sheet that I found for the sensor to Pepperl + Fuchs is not very well written, in my opinion. It seems that the outputs are impulses with dependent amplitudes of the voltage and the frequency or the timetable set by the mode of operation.

  If it's the device you use, the only way you have any possibility to decode the outputs with the USB-6008 box is to measure with an analog input and then process the data in the software. According to the supply voltage, you will probably need a voltage divider to reduce the output voltage of the sensor to a level compatible with the DAQ hardware.  You also won't be able to use the high speed of the probe because the heart rate exceeds the Nyquist limit. In standard mode, you mighte be OK, but you can use a single channel of the USB-6008 to stay in the Nyquist limit.

  Lynn

• How to build the current controlled current source

  I want to check my solution using multisim, however, I don't know how to build a circuit containing the current controlled current source. Hope someone can help me. Thanks in advance

  .

  The current direction must be placed between the the + 12V and 24 ohms resistance.

  I just made the circuit and if you make the change, you will see that you are right in your calculation.

• How to build a {+ 1, -1} by wavelets?

  I am using labview 8.6 and the statement calls for me to "convolve data with Wavelet following {+ 1, -1}.» How to build this Wavelet?

  Thanks for the help.

  -T. Vepa

  [email protected]

  Something like that

  

• Why fiber optic use 4 types of connectors? And what is single mode or multimode optical cable thinner?

  Why fiber optic use 4 types of connectors? And what is single mode or multimode optical cable thinner?

  Why fiber optic use 4 types of connectors? And what is single mode or multimode optical cable thinner?

  Hello

  To bookmark this site.  He may have more information for you. Wikipedia

  Joining lengths of optical fiber is more complex than to join the electric wire or cable. The ends of the fibers must be carefully cleavedand then spliced, either mechanically or by merging with heat. Fiber optic connectors for removable connections are also available.

  Scroll to the termination and splicing

• How to build the table with all the combinations of a source table?

  Hello

  I have a 2D array that contains the list of the power user-defined settings. The number of PSs (table rows) is not fixed. For example - 3 PSs:

  Stage of Min Max name

  PS1 3.0 3.6 0.3

  PS2 0.9 1.2 0.1

  PS3 1.7 1.9 0.1

  I need to build, from this list, a table of all the combinations as below:

  PS1 PS2 PS3

  3.0 0.9 1.7

  3.0 0.9 1.8

  3.0 0.9 1.9

  3.0 1.0 1.7

  3.0 1.0 1.8

  3.0 1.0 1.9

  3.0 1.1 1.7

  3.0 1.1 1.8

  3.0 1.1 1.9

  3.0 1.2-1.7

  3.0 1.2-1.8

  3.0 1.2-1.9

  3.3 0.9 1.7

  3.3 0.9 1.8

  3.3 0.9 1.9

  3.3 1.0 1.7

  3.3 1.0 1.8

  3.3 1.0 1.9

  3.3 1.1 1.7

  3.3 1.1 1.8

  3.3 1.1 1.9

  3.3 1.2 1.7

  3.3 1.2 1.8

  3.3 1.2 1.9

  3.6 0.9 1.7

  3.6 0.9 1.8

  3.6 0.9 1.9

  3.6 1.0 1.7

  3.6 1.0 1.8

  3.6 1.0 1.9

  3.6 1.1 1.7

  3.6 1.8 1.1

  3.6 1.1 1.9

  3.6 1.2 1.7

  3.6 1.2 1.8

  3.6 1.2 1.9

  How to build this table programmatically?

  (Note also that the number of rows in the source table is not fixed).

  Thanks in advance!

  Hi Berezka,

  using a magic of automatic indexing:

  

• Build an html5 app, I only .html, .js, images, css file folder files / files. How to build a web app/html5 app in that if I did not file config.xml?

  Build an html5 app, I only .html, .js, images, css file folder files / files. How to build a web app/html5 app in that if I did not file config.xml?

  I downloaded the game codes and try to build games using these codes, but I had only

  data folder

  image folder

  js file with .js files

  file .html

  main.js file

  In this case, how build/package web app /html5 app if no config .xml given?

  You will need create your own file config.xml. There are samples and documentation on each of the items on our microsite here:
  https://developer.BlackBerry.com/HTML5/documentation/gold/working_with_config_xml_file_1866970_11.ht...

  Note that all the elements in the samples are not necessary. For each piece, make sure that you actually need in the config.xml file. For example, most web game conversions will not need elements (using the old SDK) since they make use of BlackBerry-specific APIs.

• How to build botan lib for BlackBerry 10?

  Hello

  I'm porting some proxy software - as in 10 BlackBerry platform then I found it requries botan 1.1 +.

    (25,10):#include 
      (26,10):#include 
      (29,16):using namespace Botan;
  

  etc.

  This is the homepage of botan: http://botan.randombit.net/

  y at - it advice on how to use this lib in my application of cascades?

  Botan has a configure.py in the downloaded tar, works fine on linux, but how to build targeted qnx lib?

  Thank you.

  Unfortunately you cannot use the series of development because it requires "version 1.11.0 and require a compatible for most C ++ 11 3.1 Clang compiler or GCC 4.7.

  1.10 stable series should be ok.

• Why use fiber optics?

  Why use fiber optics?

  There are two main reasons that the fiber is used.

  1. it's faster (as above) because it uses light to transmit data instead of electrical impulses.

  2. you can run fiber a greater distance as you can in copper based media. A fiber run can go up to five miles before it needs of a Repeater.

• How does ACS check redundancy?

  Hello

  In a router, if you configure the RADIUS server, Ganymede-1 host Ganymede-2, this is how you configure the redundancy of the ACS.  My question is, how does the router check the pulse of each RADIUS server?  By ping or another keepalive mechanism?  What this command do really behind the scene?

  What is happening in our environment, is that Ganymede-1 in Windows services keep stops by itself.  We cannot authenticate and Ganymede service does not switch to Ganymede-2.

  
  Hi Ganesh.H,
  Thanks for the reply.  Looking at the command documentation, it states:
  "If the command is not configured, the timeout interval is 5 seconds."
  So it is default configured regardless I enter this command or not. However, this command does not work as TACACS service does not fail over.  Any other idea?
  

  Kevin,

  This command is not by default configured in cisco swithces the default setting is 5 seconds if you configure timeout Server tacas only without sepcifying the time in sec.

  HTH

  Ganesh.H