How to calibrate the sensor of gravity on Z3?

Similar Questions

• How to calibrate the heart rate monitor?

  How to calibrate the heart rate monitor that shows a too high concentration?

  Hello

  It is not possible to calibrate the heart rate sensor. However, various factors can affect the performance of the detector.

  During training, to optimize the performance of the heart rate sensor, ensure that you wear your watch fits on top of your wrist.

  Apple suggests that consider you the clamping Strip before starting a workout and it loosen again thereafter.

  The sensor is likely to give better results for the workouts that involve rhythmic (for example running) rather than the irregular movements (e.g., tennis). Other problems that can affect the performance of the sensor include the perfusion of the skin and wrist tattoos.

  More information:

  Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

• Satellite P200: How to calibrate the monitor to get the same colors using Photoshop CS3

  How to calibrate the monitor to get impression that looks like the picture on the screen?
  I use Photoshop CS3.

  When I get a pic of how I want it on the screen and try to print, it prints a lot more dark. I was able to calibrate my monitor iMac for photoshop, but could not find a way to do it with my Satellite P200.

  My printer is a Canon ip4300 and I'm using paper and ink of Canon.

  Hello

  Sorry, but I think that there is not much to do. I guess you have right ICC profile, but something like that is not supported by Toshiba.

• How to calibrate the PCI-6110 with NOR-DAQmx

  Hello

  I am a new user of the PCI-6110 Council tries to run the calibration using LabVIEW procedure. I look at the document "Calibration" on the page of the manuals for the Board of Directors,

  http://sine.NI.com/NIPs/nisearchservlet?nistype=psrelcon&NID=11888&lang=us&q=FQL: 28locale % 3Aen % 29 + AND + % 28phwebnt % 3 A 1081 + OR + phwebnt % 3 A 7075% 29 + AND + 28nicontenttype % 3Aproductmanual % 29 + AND + % 28docstatus % 3Acurrent % 29% 20RANK % 20nilangs: en & title = NOR + PCI-6110 + manual

  One of the first steps in the document is to call the AI_Configure command to set the input mode, beach, etc. I'm using LabVIEW 8.5 with the NOR-DAQmx software, and I can not find the command (which, in LabVIEW, seems to be "AI Config.vi") anywhere. The calibration paper was written in 2003, and I gather from Google searches (please, correct me if wrong) that this command is actually a part of NOR-DAQ traditional, who was replaced by driver OR DAQmx.

  My question is this: what is the equivalent to AI_Configure command in the latest software? Is it perhaps a subsequent document describing how to calibrate using NOR-DAQmx?

  Thanks much for any help.

  Tom McLaughlin

  Hi Tom,

  The calibration Procedure series B, E, M, S, which is also linked from this page, describes how to calibrate the PCI-6110 with NOR-DAQmx.

  Brad

• How to calibrate the battery

  I would like to know how to calibrate the battery from the computer? Please help me.

  You give all the details on your computer.

  Contact computer desk mfr of support, as in their forums, or watch its knowledge base / faq.

• How to calibrate the screens of Adobe products? For the most part, I'll use Illustrator and Photoshop.Can someone make a difference between the calibration and the Hardware calibration software using (Spider)? Thank you.

  How to calibrate the screens of Adobe products? I will mostly use Illustrator and Photoshop.Can make all the difference between calibration and the Hardware calibration software using (Spider)? Thank you.

  I use U2415 from Dell.

  I use the Spyder Pro 4. The process is quite simple - install the software, plug the Spyder and follow the steps listed in the program. I would recommend also, install the latest version of the software directly from the site of Datacolor instead to install from the disc supplied (probably outdated).

  Benjamin

• How to calibrate the battery for Satellite P750

  I have a Satellite P750 seems to also have a problem with the battery when it is asleep and NOT trendy
  She stops going flat in about 3 hours.

  Nothing connected except a dongle for the mouse. And he sleeps there is no display going.
  It is a few months old... I think it can be calibrated

  Can someone please tell me how to recalibrate the battery.

  Thanks in advance

  Hello

  You can calibrate the battery very easily.
  Disconnect the power adapter and leave the laptop disconnected until the battery is completely discharged.
  Then plug in the power adapter and charge the battery until the battery indicator (LED) would turn to green.
  This must be done and repeated 2 - 3 times in the line.

• How to activate the sensor goes simple

  I try to use the fingerprint on my laptop HP reader to simplify the connection.  I get the message to activate the sensor goes simple.  I can't find info on how to do this

  Hello

  You may need to contact the manufacturer for assistance from the given link:
  http://www.HP.com/cposupport/loc/

• How to fix the sensor arm door broken

  While removing the lid, I broke accedently part that resembles the arms of door detector (because when I turn on the printer it says error-door open. I don't know how to fix it. PL give suggestion or how to overcome this problem.

  A piece of sheet cut to size and folded half lengthwise can be pressed into the slot of the sensor arm would have been based in to trick the printer at the thought that the cover is properly closed.  You can leave it in place for normal printing, then open the cover and remove the paper when you need to access the cartridges.

• Satellite C660 - 25 c - how to calibrate the battery

  Hello

  First of all, I apologize for my bad English.

  I would like to know the procedure to calibrate the battery of my Satellite c660 - 25 c.

  Thank you

  Sincerely, romat1993

  It's pretty easy.

  To calibrate the battery, it of necessary to charge the battery until the battery indicator indicates that the battery is fully charged.
  Then, unplug the AC adapter and keep the battery discharge until it s completely empty.
  Then connect the power adapter and charge the battery again.

  This procedure should be repeated two, three times in the line.

• How to calibrate the compass of backflip

  I'm not sure what the telephone tells me to do when he says "turn the phone in a movement of eight in all possible axes."

  could someone help me with this

  Just wave it around as you draw a figure 8 in the air. Here are the steps to calibrate the Compass:

  Calibration of the compass access

  Menu-> settings-> location & compass

• How to use the 'sensors' api?

  Hi guys! I am a web-game developer but a beginner in developing blackberry applications.

  I intended to create a star atlas application and I've already finished most but failed to use the 'sensors' api.

  I referred to the example provided in the documentation of webworks 2.1 as below:

  function compassCallback(data) {
  document.write("Current azimuth:"+data.azimuth);
  }
  blackberry.sensors.setOptions("devicecompass", { delay: 1000 });
  document.addEventListener("devicecompass", compassCallback);
  

  and I added an element in the config.xml file:

  also, I added the plugin com.blackberry.sensors for the project.

  But I still can't azimuth compass...

  I really appreciate if someone could help me with this!

  I solved this problem by myself.

  The listener of the api should be placed in a "deviceready" event

• How to reset the sensor of fingerprint on Portege R700-174?

  Hello!

  my "problem":

  on my portege (r700-174), I run a win7 (which was preinstalled on your laptop), a victory for 8.1. and for some is true the technical preview of win10

  all systems are protected by password and fingerprints.

  also the win10-test system (for test prints digital-utility in win10)

  now, I deleted an old generation of win10 and do a new install with the latest version

  Unfortunately I forgort to cancel the registration of the fingerprint I had entered with this old win10 - so now this finger cannot be used
  to be entered for the new win10 (or any other system)

  My question

  is it possible to reset it completely (clear all the fingerprints for all systems) the fingerprintscanner out of one of my systems running or to cancel the registration of the
  Fingerprints for this system, which does not exist anymore on my portege?

  Thanks for the tips

  Kurt

  The fingerprints are stored on the fingerprint sensor and you will need to follow the instructions of this Toshiba document to remove your scans of fingerprints.
  http://www.MyToshiba.com.au/support/items/FAQ/386

  In the case that this procedure does not work, only the Toshiba certified maintainer would be able to erase fingerprints users digital related privacy information on the fingerprint sensor fingerprint flash.

  See also another thread:
  https://Forum.Toshiba.EU/showthread.php?75917

• How to activate the LCD in Satellite C850-B374 sensor after the BIOS update?

  Hi, friends

  I m currently a customer satisfied with Toshiba since April 2013. I've been using laptops since 2007 after using different brands, I found Toshiba to be good.

  I recently updated the Bios from 6.0 to 6.50 of the Toshiba service station.
  Update was successful and the computer works fine.

  But after restarting the LCD sensor that activates the power button in this model of laptop does not work. After entering the utility parameter that I came to know that CE of bios version is 6 and bios version 6.50 so how to activate the sensor lcd start automatically while I open the lcd screen

  Ashik

  > How to activate the sensor lcd start automatically while I open the lcd screen

  You want to start Notepad by opening the cover. Right?
  In this case you should enable the option in the system of Windows 8 settings

  [Why my laptop Windows 8 start automatically when you open the cover of the display? | http://APS2.Toshiba-tro.de/KB0/FAQ2C03FA0001R01.htm]

  "You need to find the option called: + open Panel - Power On" feature.
  This option must be enabled in order to automatically start the computer when the display lid is opened

• How to use HX85BA sensors with NI DAQ system?

  Hello

  I'm trying to connect two sensors of Omega HX85BA moisture to my NI DAQ system. The sensors detect moisture, barometric pressure, and temperature, using three 0 to 10 VDC positive outputs @ 10 mA or less, with a common thread of output. I have a SCXI-1000 chassis with two modules SCXI-1100 cards, 1102 b and a single 1102. Map of 1102 uses a block to connect SCXI-1303, while the other three cards use some 1300 years. The system will mainly use thermocouples for temperature measurements, but there will be other types of sensors, such as the two HX85BAs.

  The manual of the product for the HX85BAs is not very clear on how to connect the sensor to the system. Terminal blocks each have 32 channels with the positive and the negative screw terminals, it doesn't connect three positive sensor outputs to individual channels, with the municipality of output connected to each channel? It will work installation with SCXI cards I have, or I will have to purchase different cards? The system will be expanded to include at least 4 cards in a separate chassis SCXI 1000 more, is not a problem for the purchase of different components to adapt to the HX85BAs.

  Thanks in advance!

  Hi BBalmforth,

  You can connect the sensor to the SCXI-1100 1300 TB. Connect the positive output of CH + and CH - CHSGND. Common output wire must be connected to GND.