How to catch an error of charger

Similar Questions

• How to catch the error in 1843. .nOT months valid...

  It's in my cursor loop for
  
  mstart_issue: = TO_CHAR (to_date(mstart_issue,'YY-MON'), 'Mon.YYYY');
  mend_issue: = to_char (to_date(mend_issue,'YY-MON'), 'Mon.YYYY');
  
  But it throws error 1843...
  
  
  I have execptions to conclude an error value
  When value_error then
  alert ('value error' | moldmembership);
  
  But I need something to catch the next error is to say... The moment a month not valid error. . He should catch this error
  Like warn ('not validm months' | membershpnumber)
  What should be the exception to catch. .the 1843 error...
  As we have been exceptions, as when too many lines to catch duplicate records...
  
  And this is how my data end_issue looks like.... 10 - Jul
  12 - Aug date in the format yy - my...
  But there is error...
  Kindly help...
  Thank you

  You pass the NLS_DATE_LANGUAGE in the TO_DATE function, but not the function TO_CHAR. You want to convert the string to a date in a NLS_DATE_LANGUAGE of AMERICAN, but then you want to convert the date to a string using NLS session parameters. If these parameters are not AMERICANS, you will get the results you see.

  Justin

• How to catch the error in time-out in BEPL

  Hi, I am building some SOA BPEL to call another SOAP service that may treat the time quite a long time. In this case, SOA BPEL fails with ErrorCode ORAMED-03303. In order to ensure the completion of the entire BPEL process, I tried to add a CatchAll to intercept this error. But FAILED. The BEPL still does not with ORAMED-03303. Can someone help me on this? Thank you.

  Hi Lisoft,

  You might see these errors because of the long running process. There are several places where you have to fine-tune the settings of time-out.

  The first thing you should look into is the MBean timeout "SyncMaxWaitTime" which is set by default at 45 seconds. (Connect on SOA EM > SOA > click right on soa-infra > Administration SOA > BPEL properties > more BPEL properties > SyncMaxWaitTime). You then have to check what the JTA transaction time-out set for the instance of weblogic (connect on the SOA console-> click-> JTA field).

  You can control the time-out settings max on a composite level using "oracle.webservices.httpReadTimeout" and "oracle.webservices.httpConnTimeout" binding properties. These values configured in the composite must be less than the value of the "SyncMaxWaitTime" for synchronous processes.

  If you use the properties mentioned above for your Web service reference, then you could catch the fault of "timeout" in your composite. The binding reference might look like below in the file composite.xml.

  UI:wsdlLocation = "TestService.wsdl" > "

  http://xmlns.Oracle.com/SOATestWSService/TestWSService/bpelTestWSService#WSDL.interface (bpelTestWSService)"/ >

  http://xmlns.Oracle.com/SOATestWSService/TestWSService/bpelTestWSService#WSDL.EndPoint(TestWSService_ep/bpelTestWSService_pt)"

  location =""

  soapVersion = "1.1" >

  much = 'false' override = "may" > 10000

       

  much = 'false' override = "may" > 10000

  much = 'false' override = "may" > false

  Hope the link below could be very useful for you.

  http://soasol.blogspot.com/2009/12/how-to-set-timeout-for-Web-service-in.html

  https://technology.AMIS.nl/2011/11/18/timeouts-in-Oracle-SOA-Suite-11g/

  It will be useful.

• How to catch an error at the APEX 4.2

  Hello

  I have 2 regions 2. Region should be displayed only if there is a special application built by column ID is not null and he was captured no validation error in the region before (= 1 region)

  How can I cath the mistake and make a condition for display in region 2?

  Thank you for your help.

  Concerning

  Siegwin.

  Dynamic action.

  Create a dynamic action on change of the column that you want to validate - apply some condition, then you must have a true/false to show or hide your chosen region action.

• How to return an error code of SQL * Plus of PL/SQL procedure

  Hello
  
  I want to be able to pass a variable back to the Unix script, and I have the following code
  
  ******************
  
  sqlplus/myuser mypass < < EOF
  WHENEVER SQLERROR EXIT 41.
  WHENEVER OSERROR EXIT 81;
  execute pkonp.run_onp;
  output
  EXPRESSIONS OF FOLKLORE
  
  ERRORCODE = $?
  
  If [$ERRORCODE! = 0] #test for successful onp
  then
  #Notify failure of the administrator of the ONP.
  echo 'Fail ONP to 'date' \n'
  FI
  
  ******************
  However, I am unable to get my PL/SQL to pass an error code to SQL * more.
  
  How to catch an error in PL/SQL and pass the SQL error code *, so that SQL * Plus can then pass the error to the Unix Shell script?
  
  Thank you very much.

  Yes - in a nut shell, you need to convert Oracle codes exception to the process of Linux/Unix/Windows exit codes as the number of exception Oracle is physically too large to fit into an integer to a byte that is used by the operating system for the exit codes.

  The best place to do this would be something like a SQL * more script as is the process real o/s which should only return exit code of the kernel.

• Registry errors. System hangs. How to fix registry errors?

  How to fix registry errors? The registry errors affect the performance of the pc?
  My windows crashes often. Bases of installed microsoft security update.

  Hello

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes, and displays the information about all crashes in one table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  This utility can be used to check the event log for errors other than a BSOD, many crash
  Events will write to the event log.

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second
  or so from the time of the BSOD for more information on the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that appears
  details of all application crashes occurred in your system. The information breaks down
  is extracted from the .wer files created by the component of Windows Error Reporting (WER)
  the operating system every time that an accident occurred. AppCrashView also allows for the
  easily check the list of accidents to the text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ==================================================================

  These methods can help correct most of the problems of crash.

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

• How to catch exceptions in PowerCLI when the cmdlet PowerCLI

  Hello

  I count just one problem when catch exception throw by powercli cmdlet.

  I use the 'trap' to catch the exception like below:

  -

  ---

  Get-VMhost 192.168.43.110

  Trap {}

  "Exception when get-vmhost.

  }

  -

  ---

  I want to do this: when the 192.168.43.110 host did not exist or can not connect, I have to catch the error and give a friendly advice!

  but unfortunately the code in the block 'trap' has not run, and the error message will appear:

  -

  ---

  Get-VMHost: 2010-11-29 15:20:14 VMHost Get-VMHost with the name "192.168."

  .43.110' not found, using the specified filters.

  On line: 1 char: 11

  + Get-VMHost < < < < 192.168.43.110

  + CategoryInfo: ObjectNotFound: ( , VimException)

  + FullyQualifiedErrorId: Core_OutputHelper_WriteNotFoundError, VMware.VimA

  utomation.ViCore.Cmdlets.Commands.GetVMHost

  -

  ---

  Your idea will be a great help for me!

  Thanks in advance!

  Hello

  The reason you're trap code is not executed because the trap block intercepts only the errors, but the error you get is non-terminating. You can set the world

  $ErrorActionPreference = "Stop"
  

  or the cmdlet the ErrorAction parameter:

  Get-VMhost 192.168.43.110 -ErrorAction:Stop
  trap {
  "Exception when get-vmhost"
  }
  

  You can take a look at this thread Re: how to catch the VimExceptions correctly? also

  Kind regards

  Yasen Kalchev

  PowerCLI Dev Team

• POI cellIterator ignores empty cells.  How to catch?

  For the experienced:
  
  I have never dealt with Microsoft Excel files using java and have just started using the POI library to read data from Excel files. In the .xls file I get, there are cells that are found to be empty, although they aren't supposed to. So I have to catch these empty cells and treat them accordingly.
  
  To learn how to catch these empty cells, I created a spreadsheet of Excel a line test and wrote the following class to try to catch empty cells.
  
  The one line in the sheet has 5 columns as shown below. I entered < tt > ' 0934 < /tt > in column D with an apostrophe leader to make sure that it is stored as text.
  

  A     B        C      D     E
  ----  -------  -----  ----  ---------
  John  (BLANK)  123.4  0923  4/21/2011

  And here is the test class to examine these cells. Sorry that it is quick and dirty for the test and I don't use a try/catch and I simply leave the date column be printed as a number:

  public class ExcelTest {
      public static void main(String[] args) throws IOException {
          // The one-row test file:
          String inputFilename = "c:\\test_data\\test_sheet.xls";
          FileInputStream fis = new FileInputStream(inputFilename);
  
          HSSFWorkbook workbook = new HSSFWorkbook(fis);
          HSSFSheet worksheet = workbook.getSheetAt(0);
  
          // Get the one row
          HSSFRow theRow = worksheet.getRow(0);
          // and create an iterator
          Iterator cells = theRow.cellIterator();
  
          int columnNo = 0;
          
          // Go through the cells in the row:
          while (cells.hasNext()) {
              // Get the next cell:
              HSSFCell cell = (HSSFCell)cells.next();
              
              int cellType = cell.getCellType();
              String cellTypeDesc = null;
              String cellValue = null;
              
              switch (cellType) {
              case 0:
                  cellTypeDesc = "NUMERIC";
                  Double doubleValue = cell.getNumericCellValue();
                  cellValue = doubleValue.toString();
                  break;
              case 1:
                  cellTypeDesc = "STRING";
                  cellValue = cell.getStringCellValue();
                  break;
              case 2:
                  cellTypeDesc = "FORMULA";
                  cellValue = cell.getCellFormula();
                  break;
              case 3:
                  cellTypeDesc = "BLANK";
                  cellValue = "BLANK";
                  break;
              case 4:
                  cellTypeDesc = "BOOLEAN";
                  boolean booleanValue = cell.getBooleanCellValue();
                  cellValue = ""+booleanValue;
                  break;
              case 5:
                  cellTypeDesc = "ERROR";
                  byte byteValue = cell.getErrorCellValue();
                  cellValue = ""+byteValue;
                  break;
              }
              System.out.println("Column " + ++columnNo + " has value " + cellValue + " of type " + cellTypeDesc);
          }
      }
  }

  I expect that the class could give me some clues on the empty cell. But it turns out that the program returned only 4 columns, and the empty cell is omitted altogether as there were not any. That's what the program returned:
  

  Column 1 has value John of type STRING
  Column 2 has value 123.4 of type NUMERIC
  Column 3 has value 0923 of type STRING
  Column 4 has value 40654.0 of type NUMERIC

  Is it possible to catch empty cells?
  
  Thank you very much for help!
  
  
  Newman

  Looking through the javadocs POI, because cellIterator() does not return empty cells, you can use the getCellNum() method to determine the position of the cell in the row. You should be able to use it to determine when a cell is ignored because being blank.

• Sharing won't apply to the Apple store? How fresh Spotify my sister by charging me by iCloud family shares?

  The sharing of family purchase don't apply to the Apple store? How fresh Spotify my sister by charging me by iCloud family shares? And without notification, or by e-mail.

  Say you that you be billed for the purchase of your sister? If it is then see the page that you have published since:

  After you set up your family, anytime a family member throws a new purchase, that it will be charged directly to your account, unless the family member has gift or store credit. First of all, their store credit will be used to pay the invoice total or partial. The rest will be billed to the card of the family of the Organizer. The family Organizer, the revenue generated by the transaction will be sent to you. Learn more about how are charged purchases made on iTunes Store.

• How to fix the error with the code: 0xe7210001 failed to load powrprof, object: cls

  Hello

  Dose anyone know how to fix the error with the code: 0xe7210001, message: unable to load powrprof, object: CLSD-no-it is found;
  OR: Fingerprintsoftware OR error: replicas THotkey.exe message window and the computer freezes

  Maleware scanned and virus, also in safe mode, found no infection, reinstalled driver fingerprint, but nothing has changed.

  grateful for the help!

  Hello

  > message: unable to load powrprof, object: CLSD-no-it is found;
  In my view, this would mean that there is a problem with Toshiba Power Saver
  What laptop Toshiba, you have exactly?

  Maybe reinstall Power Saver could help. You can find it on the official website of Toshiba.

• How to solve the error-1074396080 appeared in IMAQ Image color table

  Hello

  I'm above mentioned error.

  Here, I have attached my screenshot of the error.

  Could any one please guide me how to solve this error.

  I use kinect driver kinesthesia generating U24 Bit RGB Image and I want to convert it to Image IMAQ type, but I get an error mentioned.

  But when I do not use the acquisition of vision and vision assistant then every thing is good average is no any error which I have attached in annex 2.

  Please guide me how to solve this problem.

  Thank you very much.

  
  

• How to clear the error 314101

  I am trying to create a mechanism of robust communication between a cRIO and a desktop application HMI. I tried to use the network stream I could avoid a lot of pitfalls in the management of a TCP connection. My RT code must be written to operate, and must recover gracefully network disconnections and brutal power loss. I can simulate these things quite effectively pulling the Ethernet cable or hit the button to Abort in LV

  My goal of RT has a drive with the endpoint name ' commlink/drive '. My HMI has a burner with the name "commlink/recorder. HMI tries to establish the connection: he gave the Player URL ' / //commlink/player. This set works very well on the first pitch, but not after abandonment to the RT code. On the next run, the RT code often receives the error 314101 (endpoint with the same name already exists.) to create network Stream Reader Endpoint VI. I can't understand how to clear this error in order to recreate my end point and restore the comm link. Does anyone know how? Calling the destroy Stream Endpoint VI with refnum workflow does not work, and there are no other screws or properties that look like they manage the connection management.

  I know I'm coming to the end of the conversation, but maybe some of this information will still be useful.  While network streams were designed to manage multiple connection/disconnection cycles with the underlying TCP/IP connection on the network seamlessly, they were not intended to perfectly manage and survive many lives or running instances application with endpoints.  All this is still possible, it will take more work on the part of the implementer.  An important thing to remember when using network flow, is that once you've managed to connect the two end points, the destruction of one of the endpoints (via normal stop or an accident) will require the destruction of the other end.  This means that you cannot simply reuse on RT target endpoint to communicate with several sessions of HMI.  Instead, you will have to destroy endpoint on the target of RT and create another endpoint (probably with the same name) for the next session.

  To do this, I recommend a state machine that is basically:

  1. Create an endpoint - you can do either with an infinite time-out or a continuous loop with a timeout if you need meet orders of demolition/judgment of the user.
  2. Continuous read/write in the flow in a loop.  If at any time you receive a fatal error of read/write, leave the loop.
  3. Destroy the end point and return to the State first, where you can wait for the next connection.

  I would avoid going down the road of trapping of the specific error codes and writing conditional logic for each of them.  Network stream API was designed such that for most / all cases, you should should not do this.  If you have a healthy stream that can still move the data, you will not be getting errors from the read or write call (apart from a few things matter as if we were trying to read from an endpoint unique writing of corner).  If you get an error in reading or writing, it usually means your workflow is dead and you need to create a new one if you want to continue to communicate with the remote application.

  If you follow the above, I think that you are 90-95% of the way.  As the article you link above mentions, there are additional considerations to take into account if you need to tolerate the application crashes / accidents of remote endpoint.  In these scenearios, you basically have one of the three results of the application that always uses the end point which don't collide:

  1. Demand will start to return errors:  In some scenarios, we can detect the remote application is crashed, abnormally terminated, or whatever.  In these cases, the read/write will return an error and the same pattern described above should work.
  2. The flow will introduce a disconnected state and stay offline:  This would generally happen with a fall in demand.  In these cases, we cannot tell if the connectivity loss is due to a problem with the application or poor network conditions / remote computer.  If you need to detect and recover from this scenario, you can do as a section of the link recommend you and write a timer that resets the stream network if the flow remains disconnected for a period of time.  This could be incorporated in step 2 of the above state machine quite easily.
  3. The flow will continue to make a State connected, even if the remote application is no longer functional:  This should rarely occur and would occur only when the application on the remote computer hung or an impasse, but the network computer stack is still in operational condition.  In this case, we cannot differentiate between a suspended application and the other simply has all the data to send.  If you need to detect and recover from this condition, the best thing to do is probably to create a second timer that resets the stream if it's too long you've changed successfully read/written all the data.

  I must emphasize scenarios 2 and 3 can be greatly simplified if you care to detecting the crash & block until another application attempts to connect to the application that is still ongoing.  For example, restarting the application has crashed/hung will recreate an end point and try to re-establish the connection of flow.  At this point, the application which is still running will go account he communicated with endpoint remote must have crashed and raises an error.  At this point, the same state machine mentioned above should be sufficient to re-establish the connection.  I think that this part could be more difficult in LV 2010 since the first attempt to apply newly restarted it also throw an error when you try to reconnect to the remote application.  This will occur until the endpoint in the live application was also destroyed which means that you would have to execute a loop on creating calling until she succeeded.  In 2011, we changed the behavior so the call to create the newly restarted application would cause the remote application to start return errors, but now we are still trying to establish the connection on the newly restarted application for up to the timeout limit.  If you use a state similar to the above machine, you should be able to reconnect without having to write a loop around the call to Create in the newly restarted application.

• How to explain the error in the executable file?

  As everyone knows, there are 3 parts to the cluster of error: status and source code. The State's flag, the code is the error code and the source is where Labview think that the error occurred. Normally, when I'm in the environment labview course I can just right mouse click the error and click "explain the error" and a description and detailed error possible cause rises.

  However, when I create an executable I don't know how to explain the error to the user, such as labview.

  When an error occurs that I wish I had a popup that says code error, source and EXPLANATION. The code and the only source is so enigmatic sound quite panic inducing the user, whether or not the error is unrecoverable/crash-inducing. Also this would save me having to search the online error code.

  How to make the explanation of the error code? There is a vi that I can enter an error code and get the explanation string?

  There is probably something simple I forget but I couldn't find the answer in my research. Thanks in advance for your help.

  Simple error handler and screw General Error Handler?

• How to remove the error-120 code in labview?

  Hi all

  I use to communicate with the keithley 2410 13 LabVIEW and GPIB device.

  I made a program of sweeping the stairs of programming using keithley 2400 user manual, but on the interfacing it gives 'error code-120' i.e. error of digital data.

  Can someone tell me please how to remove this error and also check my program with orders.

  Concerning

  sak16091991

  Hi sak.

  you determine the exact command, which gives this message 'error - 120' of the Keithley.

  ymanglik should be able to explain the procedure now, it uses the same device with similar problems

  I guess it's related to this part of the code:

  

  What is the reason to use FormatIntoString here? Why add a constant number to string? Why not just write the number in the string constant? Where should the number be attached? Everything in the end?

  BTW. you don't need this structure of sequence - it's all in the stream!

• How can I clear error 80070005 #-cannot download Windows updates

  original title: How can I clear error 80070005 #.

  When you try to download updates from MS I get eror # 80070005 that prevents me from download.

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates).

  Please check that you are logged into an account with administrative privileges.

  Also be sure that your antivirus software is not blocking registry and prevent the modification of the installer.

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.