custom movement indicator

I have a chart or search the table that I update. The data entered somewhere else on the VI and when you press the button "Refresh" the data is entered in the table according to the current value of the other data. I want to inform the user of the current value of this "other data". I have tried to create an option button, but could not get this to work. These data are defined as a constant enumorated. I also tried the other data next to the table as a table and flashing the current value, but could not get it work either. I wish that the value of pop up, maybe on or with a table next to the appropriate array index. Please notify. Thank you.

I made one with an integer slider which can write to indicate the index position in your application as you wish.

Tags: NI Software

Similar Questions

Cannot call the Jabber Client customer Movi

Hi team,

We cannot call Jabber Client customer Movi using client SIP URI of Movi.

Here is the photo of the back-end infrastructure: -.

CUCM: 8.6.2

VCS: X7.2

TMS: 13.2.1

CUPS: N/A

The Jabber Clients are sized CUCM and CUPS. MOVI Clients are provisioned on the TMS and VCS.

I've referred a case of TAC and TAC engineer informed that dialing SIP URI is not supported Jabber client on CUCM 8.6.2 Movi

Could someone provide me with the Bug ID or valid document that says. ?

Thank you

Saurabh

Slim,

I'll send you the link Monday

Thnx

Alok

Memory use and class of the custom movie clip?

Hello
I need to create instances of a clip 100. Is it better to add functions for these clips in the movie clip class or in a separate category?
For example, I move(), setPosition(), setRotation() functions, would be that create these features a hundred times and held memory or just reference functions? What could be better?
Thank you

There is a slight advantage to create a function to handle all objects of class vs each class having its own class. but it's such a small benefit that's not worth it to sacrifice any principle of encapsulation, so you should let each Member of the class to use the class methods.

Detail of movi record customer call

Dear all,

We would like to collect the history of calls and the duration of the customer movi.

Using the report function CDR of the user, the total duration of the tms report and County in some time. Someone knows how to get a more detailed report including the information of call by call.

However, we are doesn't have to seek details of call report that has more than 3 months. Is it possible to retain the report detail of appeal for a longer period of time?

Best regards.

Benjamin

Check your statistical parameters of TMS; Administrative Tools\Configuration\Statistics setting - you can specify how many days you want there.

As for more detailed records, take a look at the extension of the TMS Analytics, he could do it for you.

/Jens

Please note the answers and score the questions as "answered" as appropriate.

Drag and Drop indicator of progress

Hello everyone,
I really hope to get help here:
I did a fun quiz with a drag and drop slides (which works fine).
The next slide after slide slide - d├⌐poser is a regular question slide. The problem is that the progress indicator (Question 1 of the XX)
ignores the blade drag / move (I know that it is not a question slide to drag-n - d├⌐poser)
Is it possible to add the progress to this slide indicator drag-and - d├⌐poser?
I am the first and only one with this problem?
Any help is appreciated.
Greetings
Panthalassa
P.S. I use captivate 7 If this helps

Hello

No, you're not the first. I blog for a long time already on creating a custom progress indicator. The reason at that time was that he could not be located in this version, and I've created some custom question that slides get either the progress indicator. Now D & D is one of these. Take a look on:

Custom indicator progress - Captivate blog

If you're on CP7 or later, you can replace the tip by a joint action (easier to transfer to other projects) and I think that the statement of increment in the drop-down list advanced Actions was already available for 7. It can replace the Expression in the action described to increment the counter.

Lilybiri

Windows Movie Maker - my photos are blurred?

All of the photos that I put in the windows program are clear, but when I play my full screen movie they are blurred.

When I look at the image through my photos outside movie maker and full screen, it seems clear as day.

I have no effect on the image or animations.

The display resolution is reduced when we look at
the Timeline/Storyboard...this will not affect your
completed project (especially noticeable seen)
full screen). If you view the item by selecting it in the
Part of collections that better, he should look like.

If your (registered) publication WMV video files are not the
resolution you expected... you may need to use a Custom
Profile:

Personally, I find the following .wmv profile to be
useful when recording movies.
Slide show-1024x768WMV9

Download from the following site...

Movie Maker - recording movies - custom WMV profile
http://www.Papajohn.org/mm2-SavingMovies-CustomProfiles.html

Right click / Save target as... drop in the following Vista folder:
C:\Program Movie Maker\Shared\Profiles
(you will need to create the profiles folder, if it is not there)
Profiles customized for Win XP, Movie Maker will work with
Vista Movie Maker 6.

The last section of the following article explains how
Publish (save) by using a custom profile.

Windows Vista
Create custom movie settings
for Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/create-custom-movie-settings-for-Windows-Movie-Maker

Videos not showing saved Movie Maker Project?

Hello

Hours, I saved my MM project and has also released the film. And later, after save it again, I left MM and closed the project.

Now when I try to open it, files and order seem to be there but it does not show videos or audios and I don't change even the locations of them.

Here's how it looks; http://ImageShack.us/photo/my-images/804/83427753.jpg/

I got appreciatei f anyone can solve the problem and suggest a solution.

Thanks in advance,

Peut

Hi can,

· You have made changes to the computer before the show?

I suggest you thearticle consult and check if it works.

Work with projects in Windows Movie Maker

http://Windows.Microsoft.com/en-us/Windows-Vista/work-with-projects-in-Windows-Movie-Maker

You can also see the following articles for more information:

Publish a movie in Windows Movie Maker

http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

Create movie customized for Windows Movie Maker settings

http://Windows.Microsoft.com/en-us/Windows-Vista/create-custom-movie-settings-for-Windows-Movie-Maker

The movie settings: frequently asked questions

http://Windows.Microsoft.com/en-us/Windows-Vista/movie-settings-frequently-asked-questions

Hope this information helps.

Why Windows Movie Maker does not accept 320 bitrate songs?

When he tries to import the mp3 bitrate 320 song he says "cannot be imported. Not enough memory is available to complete this operation. "But all other files under 320 bitrate will import correctly. Thanks for help.

Hello

See this article on the movie settings in Windows Movie Maker and check if that helps.

Create movie customized for Windows Movie Maker settings

http://Windows.Microsoft.com/en-us/Windows-Vista/create-custom-movie-settings-for-Windows-Movie-Maker

Windows Movie Maker-uploaded photo files are blurry

I do a short presentation on my community service I've done. It is a minute and a half, but ALL my slides come out blurry. I don't know if I should just make them all about powerpoint, but I'm not sure if I can keep the music out there. Any advice?

MY HUMBLE OPINION... Photo Story 3 is a better application for video
Slide shows if you use only still shots and the music.

PhotoStory 3 for Windows
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=92755126-A008-49B3-b3f4-6f33852af9c1
(works on XP, Vista and Win7)

Now... to answer your question...

The display resolution is reduced when we look at
the Timeline/Storyboard...this will not affect your
completed project (especially noticeable seen)
full screen). If you view the item by selecting it in the
Part of collections that better, he should look like.

If your (registered) publication WMV video files are not the
resolution you expected... you may need to use a Custom
Profile:

Personally, I find the following .wmv profile to be
useful when recording movies.
Slide show-1024x768WMV9

Download from the following site...

Movie Maker - economy
Movies - profiles custom WMV
http://www.Papajohn.org/mm2-SavingMovies-CustomProfiles.html

Right click / Save target as... drop in the following Vista folder:
C:\Program Movie Maker\Shared\Profiles
(you will need to create the profiles folder, if it is not there)
Profiles customized for Win XP, Movie Maker will work with
Vista Movie Maker 6.

The last section of the following article explains how
Publish (save) by using a custom profile.

Windows Vista
Create custom movie settings
for Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/create-custom-movie-settings-for-Windows-Movie-Maker

The videos are blurred when recording a DVD or a hard drive, but in Windows Movie Maker

I converted videos from my Flip HD MP4 to MP3 Mini to allow me to use them in Windows Movie Maker. When I play my movie in WMM, everything is great! When I burn on a DVD or save it in another way outside WMM images and music are perfect, but the videos are grainy and blurred to the point where you don't see any! When I converted them, I used an AVI format as it was the only one who has produced clear videos for download.

I converted videos from my Flip HD MP4 to MP3 Mini to allow me to use them in Windows Movie Maker. When I play my movie in WMM, everything is great! When I burn on a DVD or save it in another way outside WMM images and music are perfect, but the videos are grainy and blurred to the point where you don't see any! When I converted them, I used an AVI format as it was the only one who has produced clear videos for download.

=================================
The following links may be worth a visit:

Movie Maker and Flip digital camcorders
http://www.Papajohn.org/mm2-CamcordersFlip.html

Since a Windows Movie Maker Flip video camera

http://www.brighthub.com/multimedia/video/articles/1402.aspx

Might be worth trying to convert your MP4 files to the
Before you import into Movie Maker WMV format.

The following freeware can convert:

(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)

Format Factory
http://www.pcfreetime.com/
(FWIW... installation..., you can uncheck
('all' boxes on the last screen)

First... after the download and installation of Format
Factory... you can open the program and
left click on the toolbar, the "Option" button and
"Select an output folder to" / apply / OK.
(this is where you find your files after they)
are converted)

Drag and drop your video clips on the main screen...

Select "all to WMV" / OK...

Click on... Beginning... in the toolbar...

That should do it...

If the resolution of your finished video file is always
unsatisfactory... you can watch in the use
Custom settings.

Windows Vista
Create custom movie settings
for Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/create-custom-movie-settings-for-Windows-Movie-Maker

There are some profiles which can be copied from
the following site that will work in Vista Movie Maker:

Personally, I use the profile .wmv
When recording movies.
Slide show-1024x768WMV9

Download from the following site...

Movie Maker 2 - economy
Movies - profiles custom WMV
http://www.Papajohn.org/mm2-SavingMovies-CustomProfiles.html

Right click / Save as... drop in the following folder:
Folder of C:\Program Maker\Shared\Profiles Movie
(if there is no record of profiles... you will have to create it)

Choose "Show-1024x768WMV9" when you publish (save)...

Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

VCS Starter Pack - home Movi

Hi guys,.

I have a problem with saving a customer Movi to a VCS Starter pack on the Internet.

My design is the following: Movi - Internet - router - VCS Starter pack (no TMS). The VCS is connected to the local network with a single interface and is static using a NAT to the internet with the cisco router that lies in front of it.

I am able to record the movi for the vcs client if the movi is connected to the network local lan. The setting on the vcs are simple:

Default credentials - authentication - Check policy

By default, subzone - authentication policy - threat as authenticated

When I try to connect customer movi home (over the internet - without VPN) I get this message:

I read

Cisco VCS Expressway Starter Pack - Cisco's TelePresence - Cisco VCS X5.1 Deployment Guide and I think I did all right, but because it doesn't work well I have right to sth.

Anyone have any ideaa of newspapers?

Thank you for your help.

A few notes:

* What vcs version do you use? There seems to be something > = 6 X

* check the field: cronus.ro is added as the sip domain and is also implemented announces the field in movi

* Are you sure that your password is correct?

* You can also try to set the default area, sub-area by default (and maybe other areas) of 'treat as authenticated' just to see if you can register

* you have the option "dual interface", should be in your fan

The simultaneous ringing of two clients MOVI

Here is the config...

Address MOVI is the last[email protected] / * / for all users

The same account and the address is used when you connect to a VCS-control of the office or a VCS-Highway to the House.

When the user is logged on and using his Office MOVI and usually leaves without disconnection

The user will then House and newspapers in the VCS-highway.

When the user is called from inside network... it sounds the MOVI customer who is registered for the VCS - C (inside) and never ring the customer MOVI external home. If opt out us customer MOVI of the VCS-noninale... it sounds then the external customer MOVI.

We do NOT have find Me on our VCS and we can consider, however, I do not think that it would give a simultaneous ringing.

I understand that if we had FindMe... we would need separate addresses for office and home as...

[email protected] / * /.

and

[email protected] / * /.

The VCS search rules can be written to make true simultaneous ringing for MOVI two clients with the same address?

Thank you

Hi Steven,

I just checked this in the lab, and it seems that research for the Local area and the area on the VCS - C rules should have the same priority in order for two customers to ring at the same time.

The downside of this (compared to what the rules of search in the defafult for the Local area 50 and 100 for the covered area) is that the VCS - C will send more research to the VCS-E then it normally would (searches for aliases that are observed in the local area on the SCV - C but is not normally on the VCS-E) , but normally this should not be a problem.

To work around the problem, you could do a search model Movi device URI-specific rule, apply this rule of research in the area of course and set the priority for this search rule identical to that of the local area. If you use [email protected] / * / for your Movi records, would be a corresponding regular expression

.+\. [email protected] / * /\.com$

The advantage of having this rule of specific search (and more), you'll see searches less touched your fast track if you were to change the priority of the current rule of the research on zone crossing to match that of the rule of local area search.

If it's true that your video users tend to use Movi times when, in the office and out of office, without connecting to their customers of Movi in exercise when you leave, you probably want to have the same priority to the local area and the crossing area.

Normally this should not occur too often, however, as users who employ Movi when in office, normally do on a laptop they bring with them when they leave, removal of the possibility of the customer in-Office Movi still being connected while the user current left.

Hope this helps,

Andreas

Problem recording movi to VCSe (VCSC work)

Hello

for some reason any Jabber client video are not able to log on to VCSe. If they are in the office and connect to the VCSC his work.

Deployment:

VCS: 7.2.2

TMSPE: 14.2

VCSC is joined to the domain, so people should be able to login with LDAP credentials. Since a few days we have changed an OU for users in AD. I resynced the TMS users. In VCSC my thought is that I have nothing to do, right? I do not know its function, change OR cause the customer movi is not som uch in use.

I started track of debugging on VCSe registration go external with movi (IP addresses and names have been changed):

SIPMSG:

| SIP SUBSCRIBE:@domain.comSIP/2.0

Via: SIP/2.0/TLS 192.168.100.10:3157; branch = z9hG4bK06fbfdf1d928fdea44551eb01444f279.1; received = 78.51.4.182; = 45938 rport

Call ID: [email protected]/ * /.

CSeq: 201 SUBSCRIBE

Contact: <> @192.168.100.10:3157; transport = tls >

From: <> @domain.com >; tag = ff9e0e9142437b34

To: <> [email protected] / * />

Max-Forwards: 70

Directions:

User-Agent: TANDBERG/774 (4.5.7.16762 PCS) - Windows

Expires: 300

Event: ua-profile;model=movi;vendor=tandberg.com;profile-type=user;version=4.5.7.16762;clientid="S-1-5-21-176747291-1711663684-1688638919";connectivity=1

Accept: application/pidf + xml

Content-Length: 0

SIPMSG:

| SIP/2.0 404 not found

Via: SIP/2.0/TLS 192.168.100.10:3157; branch = z9hG4bK06fbfdf1d928fdea44551eb01444f279.1; received = 78.51.4.182; rport = 45938; DefaultZone = ingress-box

Call ID: [email protected]/ * /.

CSeq: 201 SUBSCRIBE

From: <> @domain.com >; tag = ff9e0e9142437b34

To: <> [email protected] / * />; tag = a9bdf7d526c0cb56

Server: TANDBERG/4120 (X7.2.2)

WARNING: 79.34.34.123:5061 399 'political response '.

Content-Length: 0

So we have a 404 not found error, but why and what is not found, the user who tried to connect? For some reason, it seems that demand is not going through VCSe VCSC, it is my feeling?

Auth area is as follows:

VCSe:

DZ: do not check the credentials

TZ: do not check the credentials, accept records submitted by proxy: refuse

DSZ: do not check the credentials, registration: refuse

VCSC:

DZ: verify the credentials

TZ: verify the credentials, accept records sent by proxy: enable

DSZ: verify the credentials, registration: enable

I also implemented a CPL on VCSe (not on the VCSC) but I have disabled also the policy tried it unsuccessfully with so this should not be the problem.

I tested a few other constelattion without success. :-( Maybe someone has an idea of what I can test. What is a firewall issue?

Concerning

Thorsten

Hello

Could check you if the 'Record SIP proxy Mode' setting is on "Known Proxy" only on Hwy VCS? You will find this SIP configuration setting.

This is a required parameter for allow VCSe work as a proxy SIP for registration. It is not enough to define 'Recording proxy Acept' control VCS. In general, you should have this record transmitted by proxy configuration:

If you don't want to use the proxy record but jabbers on the internet for you sign up directly for VCSe, you must disable the Save proxy functionality and create the SIP domain in VCS Expressway. It would be something like this:

Try this.

Paulo Souza

Please note the answers and mark it as "answered" as appropriate.

Adjust the length of appeal unanswered Movi (numbering, length)

Someone does know of a way to define how long a customer Movi consist another user (before giving up the call) if the other user does not meet the call (but not online)? In my tests, the dial just keeps ringing perpetually.

Hi Andrew!

I haven't seen any parameter provisioning, sounds like a feature on the site of the client request.

But it should be possible to do some magic with a CPL or call FindME to add some generic

failure / advance after awhile.

Martin

Phonebook on MOVI 4.2

Hi all

We are implementing MOVI 4.2 Client, we use the TMS 13.0.2, VCS - C 6.1 (2 in cluster mode) and VCS-E 6.1.

VCS have the key Provisiong activate, and allows us to validate MOVI LDAP users.

The validation works fine, but the works of Don t of telephone directory. When we try to find someone, HLA MOVI send a message 'NO EXACT MATCH IN DIRECTORY'.

We define the directory on the MSDS as directory-emc, and I set to supply (the user directory) as [email protected] / * /

Someone help me with this? I saw a lot of pdf and the installation guides, but nothing...

Thank you

Juan Granata

Hi Juan!

You wrote that you are using:

[email protected] / * /.

but the user part upftont the @ must be telephone directory.

Generally it takes directory @.

If the name of the sip domain that is implemented there are emc - corp .net it must be:

[email protected] / * /.

All this put in place as your "phone book server URI" and if you are also using external reg via the motorway

as "Directory Public telephone server URI", sign out of your customer movi, connect and test again.

If you have additional difficulty I would check that your agent of tms diagnosis shows no errors,

Verify that the users that you expect to see were connected at least onece (or you use findme).

If this does not debugging on VCS and help your customers.

As you accelerate movi 4.2 and TMS13.0.1 I would also check that you have downloaded the provisioning xml templete

for the tms (does not affect the directory, but you should have that place anyway :-)

Please vote for answers and must be answered if it is defined.

20 Oct 14:05:45	"" "" "" TVCS: event = "Message sent" Service ="SIP" Src - ip = "X" Src-port ='5060"Dst - ip ="Y"Dst-port ="29284"Protocol ="TCP"Num-bytes ="426"Level ="4"elements UTCTime = '2011-10-20 11:05:45, 349"
20 Oct 14:05:45	"" "" "" "TVCS: event ="responded"Service ="SIP"Src - ip ="X"Src-port ='5060" Dst - ip = "Y" Dst-port ="29284" Protocol = "TCP" method ="FOLLOW"to ="sip: [email protected] / * /" code-response = "404" " Level ="3"elements UTCTime = '2011-10-20 11:05:45, 349"
20 Oct 14:05:45	"" "" "TVCS: event ="application received"Service ="SIP"Src - ip ="Y"Src-port ="29284"Dst - ip ="X"Dst-port ='5060" Protocol = "TCP" method ="SUBSCRIBE" Request-URI = 'sip: [email protected] / * /"Level ="3"elements UTCTime ='2011-10-20 11:05:45, 347"
20 Oct 14:05:45	"" "" "TVCS: event ="Message received"Service ="SIP"Src - ip ="Y"Src-port ="29284"Dst - ip ="X"Dst-port ='5060" Protocol = "TCP" Num-bytes ="987" Level = "4" UTCTime elements =	20 Oct 14:05:43	"" "TVCS: Event =" Message sent "Service ="SIP"Src - ip ="X"Src-port ="5060"Dst - ip ="Y"Dst-port ="29284"Protocol ="TCP"Num-bytes ="581"Level ="4"elements UTCTime ='2011-10-20 11:05:43, 726"
20 Oct 14:05:43	"" "" "" "TVCS: event ="responded"Service ="SIP"Src - ip ="10.1.101.10"Src-port ='5060" Dst - ip = "109.166.141.13" Dst-port ="29284" Protocol = "TCP" method ="FOLLOW"to ="sip: [email protected] / * /" code-response = "407" " Level ="3"elements UTCTime = '2011-10-20 11:05:43, 726"
20 Oct 14:05:43	"" "" "TVCS: event ="application received"Service ="SIP"Src - ip ="Y"Src-port ="29284"Dst - ip ="X"Dst-port ='5060" Protocol = "TCP" method ="SUBSCRIBE" Request-URI = 'sip: [email protected] / * /"Level ="3"elements UTCTime ='2011-10-20 11:05:43, 726"

custom movement indicator

Similar Questions

Maybe you are looking for