How to catch commissariats of remoteObject?

Similar Questions

• BBM how to retrieve BBM be hacked or how to catch the pirate?

  Hello everyone, I have a few requests here as member of my family comes from live be hacked:
  -can I know if we provide BBN, PIN, could we know email ID used to register?
  -How to retrieve the BBM be hacked?
  -How to catch the pirate?
  Thanks in advance!

  Most likely you allowed someone to get your credentials BBID, or you have been deceived into giving them upward.

  This is the management of Blackberry users who have their BBID diversion...

  -------------
  In these scenarios, the user must email\contact our office of privacy protection
   
  http://CA.BlackBerry.com/legal/privacy-policy.html
   
   
  10. questions or concerns? How to contact us
  BlackBerry welcomes your questions or comments about this privacy policy and the way in which we treat your personal information. If you have any questions, concerns, or you want to request access to your personal information under the privacy or data protection laws, please communicate with BlackBerry, either by e-mail or in writing and we will use commercially reasonable efforts to respond:
  email: [email protected], or
  write to one of the following offices of the nearest BlackBerry you:
  BlackBerry Privacy Office c/o BlackBerry (attention Legal Department), 2200 University Avenue East, Waterloo, Ontario, Canada N2K 0 to 7
  BlackBerry Privacy Office c/o BlackBerry (attention Legal Department), 200 Bath Road, Slough, Berkshire, United Kingdom SL1 3XE
  BlackBerry Privacy Office c/o BlackBerry (attention Legal Department), 1 International Business Park, The Synergy Building, 2nd Floor, Singapore 609917
  ------------

• How to catch the event storm rotation?

  Hi all

  As the title,

  I want to know how to catch the rotation on the device of the storm?

  Y at - it samples which I can draw?

  Thank you

  You can use the method getOrientation() class net.rim.device.api.ui.Display

  Press the button Bravo thank the user who has helped you.

  If your problem has been resolved then please mark the thread as "accepted Solution".

• How to catch exceptions in PowerCLI when the cmdlet PowerCLI

  Hello

  I count just one problem when catch exception throw by powercli cmdlet.

  I use the 'trap' to catch the exception like below:

  -

  ---

  Get-VMhost 192.168.43.110

  Trap {}

  "Exception when get-vmhost.

  }

  -

  ---

  I want to do this: when the 192.168.43.110 host did not exist or can not connect, I have to catch the error and give a friendly advice!

  but unfortunately the code in the block 'trap' has not run, and the error message will appear:

  -

  ---

  Get-VMHost: 2010-11-29 15:20:14 VMHost Get-VMHost with the name "192.168."

  .43.110' not found, using the specified filters.

  On line: 1 char: 11

  + Get-VMHost < < < < 192.168.43.110

  + CategoryInfo: ObjectNotFound: ( , VimException)

  + FullyQualifiedErrorId: Core_OutputHelper_WriteNotFoundError, VMware.VimA

  utomation.ViCore.Cmdlets.Commands.GetVMHost

  -

  ---

  Your idea will be a great help for me!

  Thanks in advance!

  Hello

  The reason you're trap code is not executed because the trap block intercepts only the errors, but the error you get is non-terminating. You can set the world

  $ErrorActionPreference = "Stop"
  

  or the cmdlet the ErrorAction parameter:

  Get-VMhost 192.168.43.110 -ErrorAction:Stop
  trap {
  "Exception when get-vmhost"
  }
  

  You can take a look at this thread Re: how to catch the VimExceptions correctly? also

  Kind regards

  Yasen Kalchev

  PowerCLI Dev Team

• POI cellIterator ignores empty cells.  How to catch?

  For the experienced:
  
  I have never dealt with Microsoft Excel files using java and have just started using the POI library to read data from Excel files. In the .xls file I get, there are cells that are found to be empty, although they aren't supposed to. So I have to catch these empty cells and treat them accordingly.
  
  To learn how to catch these empty cells, I created a spreadsheet of Excel a line test and wrote the following class to try to catch empty cells.
  
  The one line in the sheet has 5 columns as shown below. I entered < tt > ' 0934 < /tt > in column D with an apostrophe leader to make sure that it is stored as text.
  

  A     B        C      D     E
  ----  -------  -----  ----  ---------
  John  (BLANK)  123.4  0923  4/21/2011

  And here is the test class to examine these cells. Sorry that it is quick and dirty for the test and I don't use a try/catch and I simply leave the date column be printed as a number:

  public class ExcelTest {
      public static void main(String[] args) throws IOException {
          // The one-row test file:
          String inputFilename = "c:\\test_data\\test_sheet.xls";
          FileInputStream fis = new FileInputStream(inputFilename);
  
          HSSFWorkbook workbook = new HSSFWorkbook(fis);
          HSSFSheet worksheet = workbook.getSheetAt(0);
  
          // Get the one row
          HSSFRow theRow = worksheet.getRow(0);
          // and create an iterator
          Iterator cells = theRow.cellIterator();
  
          int columnNo = 0;
          
          // Go through the cells in the row:
          while (cells.hasNext()) {
              // Get the next cell:
              HSSFCell cell = (HSSFCell)cells.next();
              
              int cellType = cell.getCellType();
              String cellTypeDesc = null;
              String cellValue = null;
              
              switch (cellType) {
              case 0:
                  cellTypeDesc = "NUMERIC";
                  Double doubleValue = cell.getNumericCellValue();
                  cellValue = doubleValue.toString();
                  break;
              case 1:
                  cellTypeDesc = "STRING";
                  cellValue = cell.getStringCellValue();
                  break;
              case 2:
                  cellTypeDesc = "FORMULA";
                  cellValue = cell.getCellFormula();
                  break;
              case 3:
                  cellTypeDesc = "BLANK";
                  cellValue = "BLANK";
                  break;
              case 4:
                  cellTypeDesc = "BOOLEAN";
                  boolean booleanValue = cell.getBooleanCellValue();
                  cellValue = ""+booleanValue;
                  break;
              case 5:
                  cellTypeDesc = "ERROR";
                  byte byteValue = cell.getErrorCellValue();
                  cellValue = ""+byteValue;
                  break;
              }
              System.out.println("Column " + ++columnNo + " has value " + cellValue + " of type " + cellTypeDesc);
          }
      }
  }

  I expect that the class could give me some clues on the empty cell. But it turns out that the program returned only 4 columns, and the empty cell is omitted altogether as there were not any. That's what the program returned:
  

  Column 1 has value John of type STRING
  Column 2 has value 123.4 of type NUMERIC
  Column 3 has value 0923 of type STRING
  Column 4 has value 40654.0 of type NUMERIC

  Is it possible to catch empty cells?
  
  Thank you very much for help!
  
  
  Newman

  Looking through the javadocs POI, because cellIterator() does not return empty cells, you can use the getCellNum() method to determine the position of the cell in the row. You should be able to use it to determine when a cell is ignored because being blank.

• How to catch the end of an external task?

  Hello
  
  How to catch the end of an external task?
  OS: Windows 2003
  DB: 10.2.0.1
  
  The code I wrote will run forever:

  declare
     d date;
     n number;
     -- and more
  begin
      d := sysdate;
      dbms_scheduler.create_job(
        job_name => c_job,
        job_type => 'executable',
        number_of_arguments  => 14,
        job_action => c_cmd,
        enabled => false,
        auto_drop => true
      );
      dbms_scheduler.set_job_argument_value(c_job,1,'/c');
      dbms_scheduler.set_job_argument_value(c_job,2,c_command);
      dbms_scheduler.set_job_argument_value(c_job,3,c_pw);
      dbms_scheduler.set_job_argument_value(c_job,4,c_pw_val);
      dbms_scheduler.set_job_argument_value(c_job,5,c_port);
      dbms_scheduler.set_job_argument_value(c_job,6,c_port_val);
      dbms_scheduler.set_job_argument_value(c_job,7,c_key);
      dbms_scheduler.set_job_argument_value(c_job,8,c_key_val);
      dbms_scheduler.set_job_argument_value(c_job,9,c_agent);
      dbms_scheduler.set_job_argument_value(c_job,10,c_batch);
      dbms_scheduler.set_job_argument_value(c_job,11,c_source);
      dbms_scheduler.set_job_argument_value(c_job,12,c_dest);
      dbms_scheduler.set_job_argument_value(c_job,13,c_log);
      dbms_scheduler.set_job_argument_value(c_job,14,c_yes);
      dbms_scheduler.enable(c_job);
   
      -- Job started, waiting...
      loop
        select count(1)
        into n
        from user_scheduler_job_run_details t
        where job_name = c_job and
              t.log_date >= d;
        exit when n > 0;
        dbms_lock.sleep(1);
      end loop;
   
  end;

  The work ends in fact, user_scheduler_job_run_details is updated (if you run the select statement in the loop in another session, it returns 1), but the selection running into the loop will always return 0.
  Any help is appreciated.
  
  Kind regards
  Lmocsi

  Hello

  It's strange, maybe you can try to use the timestamp type rather type date and with the help of an offset in the case where the work already finished for example d = systimestamp - second interval '1'

  Another thing to watch is if you compare the dates in the same time zone, otherwise you must ensure that all sessions use the same time zone (setting the default_timezone attribute Planner can help).

  Hope this helps,
  Ravi.

• How to catch the exception in the sliders

  Hello
  
  How to catch the exception no. DATA FOUND/other exceptions with the cursor
  

  DECLARE
  CURSOR c1 IS SELECT * FROM EMP WHERE empno = 1234;
  BEGIN
  FOR i IN c1 LOOP
  DBMS_OUTPUT.PUT_LINE(i.ename);
  END LOOP;
  END;

  so 1234 is not in my table, how to trap this.could help me please
  
  Published by: user4587979 on 27 May, 2010 03:46

  Maybe it's

  declare
    CURSOR c1 IS SELECT * FROM EMP WHERE empno = 1234;
    lemp c1%rowtype ;
  begin
    open c1;
    loop
      fetch c1 into lemp;
      exit when c1%notfound;
      DBMS_OUTPUT.PUT_LINE(lemp.ename);
    end loop;
    if c1%rowcount = 0 then
      raise no_data_found;
    end if;
    close c1;
  end;
  

• How to catch an error of charger

  How to catch a charger error "error opening URL ' file://... '. » ? Help, please.

  Thank you got with this...
  var my_lv:LoadVars = new LoadVars();

  my_lv. OnLoad = {function (success:Boolean)}
  If (success) {}
  trace ("Image loaded");
  } else {}
  trace ("error loading Image");
  i = 1;
  myLoader2.load ("Images/Construction /" + currSchool + i + '.jpg')
  }
  };

  my_lv. Load ("Images/Construction /" + currSchool + i + '.jpg');
  myLoader2.load ("Images/Construction /" + currSchool + i + '.jpg');

• How to catch the long menu key?

  Hello

  I have a background application that launches a window of the screen only and I need to be able to listen/catch long menu key press the application to switch to this meal bar. In fact, if the user launches the application switch my screen bar somehow needs to know so he can close. How do I do that? A UIApllication can simply listen to deactivate() calls but screen can do that. I've already implemented KeyListener, but the long press event is not caught it.

  Update:

  Hmmm... She is one storm that has the feture to launch the switch application through a long press on the menu button? Doen't work on Curve 8900.

  I can still catch the application change event in a window of the screen, anyone know how?

  Thank you.

  KeyListerners keyRepeat() seems to intercept the key event in the application that starts the screen.

  Problem seems to be resolved then.

• How to catch the error in time-out in BEPL

  Hi, I am building some SOA BPEL to call another SOAP service that may treat the time quite a long time. In this case, SOA BPEL fails with ErrorCode ORAMED-03303. In order to ensure the completion of the entire BPEL process, I tried to add a CatchAll to intercept this error. But FAILED. The BEPL still does not with ORAMED-03303. Can someone help me on this? Thank you.

  Hi Lisoft,

  You might see these errors because of the long running process. There are several places where you have to fine-tune the settings of time-out.

  The first thing you should look into is the MBean timeout "SyncMaxWaitTime" which is set by default at 45 seconds. (Connect on SOA EM > SOA > click right on soa-infra > Administration SOA > BPEL properties > more BPEL properties > SyncMaxWaitTime). You then have to check what the JTA transaction time-out set for the instance of weblogic (connect on the SOA console-> click-> JTA field).

  You can control the time-out settings max on a composite level using "oracle.webservices.httpReadTimeout" and "oracle.webservices.httpConnTimeout" binding properties. These values configured in the composite must be less than the value of the "SyncMaxWaitTime" for synchronous processes.

  If you use the properties mentioned above for your Web service reference, then you could catch the fault of "timeout" in your composite. The binding reference might look like below in the file composite.xml.

  UI:wsdlLocation = "TestService.wsdl" > "

  http://xmlns.Oracle.com/SOATestWSService/TestWSService/bpelTestWSService#WSDL.interface (bpelTestWSService)"/ >

  http://xmlns.Oracle.com/SOATestWSService/TestWSService/bpelTestWSService#WSDL.EndPoint(TestWSService_ep/bpelTestWSService_pt)"

  location =""

  soapVersion = "1.1" >

  much = 'false' override = "may" > 10000

       

  much = 'false' override = "may" > 10000

  much = 'false' override = "may" > false

  Hope the link below could be very useful for you.

  http://soasol.blogspot.com/2009/12/how-to-set-timeout-for-Web-service-in.html

  https://technology.AMIS.nl/2011/11/18/timeouts-in-Oracle-SOA-Suite-11g/

  It will be useful.

• How to catch exceptions all not managed in a form?

  Hello

  I would like to catch any excepction not handled in a form and a registration in a newspaper. When the exception is captured, I would like to re-reaise, it, or at least show the exception message to the user.

  Is this possible?

  Thanks in advance

  See using form builder.  Are specifically looking for details on triggers-ERROR and ON-MESSAGE.  A code sample is provided, but do not forget to read the text to understand how it works.  Note that some errors may be intercepted.

• How to 'catch' the data in a field of apex_item.text

  Hello

  How can I catch the data, I write in a field of apex_item.text and copy it to another table.

  Example:

  Source table

  Create table Hund(
  PRI_KEY number,
  Name varchar2(30)
  );
  
  

  Classic report in the Apex:

  Select
  APEX_ITEM.DISPLAY_AND_SAVE(1, PRI_KEY),
  APEX_ITEM.DISPLAY_AND_SAVE(2,Name),
  APEX_ITEM.TEXT(3,weight) as weight
  From Hund;
  
  

  The weight of the column do not exist in the table Hund, but is it possible to catch what is written in the Apex Page (and put in another table)?

  EDIT: Maybe a resolution with a Collection of APEX?

  THX

  René

  René

  F01 being a checkbox only lines checked are in the table.

  This means that when the box is checked for lines 1 and 3. Only the rows are in the table in the f01.

  Then, when for the second race hollow the loop index is 2. You treat rank 3 for the f01 table but the 2nd rank of the other tables.

  You have to match the table value f03 with f01 table values to find the line number for the f20 table.

  for i in 1..apex_application.g_f03.count
  loop
     for k in 1..apex_application.g_f01.count
     loop
        if apex_application.g_f03(i) = apex_application.g_f01(k)
        then
           UPDATE PRM_CHK_BSTBS_ABGL_EDIT
           SET KOMMENTAR=APEX_APPLICATION.G_F20(i)
           WHERE NUMMER_EINHEITLICH=to_number(APEX_APPLICATION.G_F03(i));
         end  if;
     end loop;
  end loop;
  

  This will update the checked lines.

  If you want to update all the lines to leave out the inner loop and instruction.

  I don't see what you posted I have, this is the case, but it is not a good idea to mix apex_item and columns be updated regular.

  Nicolette

• How to catch the error in 1843. .nOT months valid...

  It's in my cursor loop for
  
  mstart_issue: = TO_CHAR (to_date(mstart_issue,'YY-MON'), 'Mon.YYYY');
  mend_issue: = to_char (to_date(mend_issue,'YY-MON'), 'Mon.YYYY');
  
  But it throws error 1843...
  
  
  I have execptions to conclude an error value
  When value_error then
  alert ('value error' | moldmembership);
  
  But I need something to catch the next error is to say... The moment a month not valid error. . He should catch this error
  Like warn ('not validm months' | membershpnumber)
  What should be the exception to catch. .the 1843 error...
  As we have been exceptions, as when too many lines to catch duplicate records...
  
  And this is how my data end_issue looks like.... 10 - Jul
  12 - Aug date in the format yy - my...
  But there is error...
  Kindly help...
  Thank you

  You pass the NLS_DATE_LANGUAGE in the TO_DATE function, but not the function TO_CHAR. You want to convert the string to a date in a NLS_DATE_LANGUAGE of AMERICAN, but then you want to convert the date to a string using NLS session parameters. If these parameters are not AMERICANS, you will get the results you see.

  Justin

• How to catch the exact validation error message?

  Hi experts,
  
  I want to intercept the exact validation error message.
  If the validate operation fails then I get the following SOAP fault:
  
  < env:Fault xmlns:ns0 = "http://docs.oasis-open.org/wsbpel/2.0/process/executable" >
  ns0:invalidVariables < faultcode > < / faultcode >
  faultName < faultstring >: {{http://docs.oasis-open.org/wsbpel/2.0/process/executable} invalidVariables}
  messageType: {{http://schemas.oracle.com/bpel/extension} RuntimeFaultMessage} < / faultstring >
  < faultactor / >
  < detail >
  < exception / >
  < / details >
  < / env:Fault >
  
  However, in the Manager of the company (audit trail) I see the following message to the failure to validate the operation:
  
  Invalid data: the value of the variable 'req_ProcessAdjustmentOp' part 'bodyUPI' does not match the schema definition for this part of invalid text '?' in the element: 'date '. Invalid xml document is shown below:
  
  I would like to send this message to the service consumer because it contains more information about the error. How I do that? I've tried the function ora: getFaultAsString() but I had the original sin.
  
  Thank you
  Viktor

  The root cause of the problem is that, in the bpel fault lifted, the details of the fault are empty (i.e.) {summary}, {details} and

   are not populated for  element.
  This same issue was logged and tracked via Bug 12551111 - VALIDATE ACTIVITY DOES NOT POPULATE FAULT VARIABLE FROM CATCH - published on My Oracle Support.
  
  As per developments update in 12551111 :
  Failure content won't be set for standard faults according to BPEL specs. It will be available in the audit trail.
  
  This means that :
  1. {summary} , {detail} and 
  

  will be omitted for standard faults fault variables.
  2. given that the details of 'fault' are not met, "validation" of the variable of fault against the schema (RuntimeFault.wsdl) should fail.

  There is a demand for improvement already filed: Bug 12700279 - FAULT VARIABLE DETAILS ARE NOT POPULATED for STANDARD HOLES.
  Unfortunately, at the moment there is no workaround known solution for this.

  Best regards
  Oana

• How to catch the movement of return on investment when the user drags a handful of return on investment?

  Hello, I use VDM2009 with c#. I need to make some manipulations of KING and need to intercept mouse movements, but do not know what to use. For example, suppose I created a KING OvalContour and that it is a circle (width = height). I have to do 2 things: 1) when the user drags one of the 4 handles, I need to check what handle is moved so that I can drag a few adjacent programmatically so that the circle is a circle and does not become an oval.

  (2) when the user clicks/behind the center of the circle, I need prevent the update so that the circle does not move the return on investment. (It would be even better if there was a way to disable the movement of the circle and allow the scale.) I don't know what to use to accomplish this behavior and do not know how to retrieve the KING handles about which is slipped. Any help would be very appreciated. Thank you, Neville

  Hello Ben,

  Thanks again for your help.  I looked up the definitions for the ROILeft, etc., in the reference VB help as you suggest.  While many objects is similar in setting/name, it seems that these objects (ROILeft, etc.) are those who are not easy to find how to use in the c# version.  But thanks for pointing me to the help file in VB Ref.  I wish, in there wasn't one for c#... I can't understand how to search effectively in the Visual c# help file that is integrated into Visual Studio.

  Thanks for your suggestion about the return on investment.  It makes sense, and I'll keep it in mind.

  In the meantime, I found a solution to my problem.  I use c# function public bool PreFilterMessage (ref Message objMessage) for prefilter mousedown and mousemove event messages.  Once I found one, I check if the cursor is on a part of the KING that I care.  If I want to do something special, I'm doing it right here.  If I want to keep the normal behavior of the KING OR on mousedown and mousemove, I trash the message.

  It's a total pain, but it seems that functions NOR are not put in place to do this kind of things in an elegant way.  Thanks again for your help!

  Neville