How to change a category of public network at work

Similar Questions

• How to change automatic internet connection sharing network channel

  I really need to change my internet auto channel sharing, but it is not yet an option... Can someone tell me please how to change automatically!

  It is setup for internet sharing... This is a totally different configuration... You cannot use auto because your computer is now the router... but your computer does not have a scan wireless for unused channel capacity.

• How to change a category of electronic mail?

  I use ATT Uverse Yahoo mail on Win 7

  Hi Marian,

  The question you posted would be better suited in the mail of Yahoo Forums. I recommend you to get help on the Yahoo support site:

  http://help.Yahoo.com/l/us/Yahoo/helpcentral/

• ICF on Windows 7: how to change the location of the home network be connected?

  Windows on Windows 7 firewall - ' Home or work (private) networks are not connected and 'Public networks' are connected. This prevents the PC to be seen on my home network.

  How can I change the location of the home network be connected?
  I have internet access but cannot connect to a network.

  Go to "Network and sharing Center" > click on "Customize" > change the location of the 'Public', 'private '.

  Edit
  Sorry the above is garbage, I was on mode vista.

  Try, 'network and sharing Center' in the section 'Show your active networks' - it can show 'Public network' or 'work '. If, so click on the one which is indicated and select "home network".

  Note:
  If the other PC on your network are Win XP you can change the name of working group of win7 in "MSHOME".
  IE "network and sharing Center" > click on the arrow down to the network discovery > change settings > tab computer name > change.

• HP photosmart 5520: how to change wireless network

  We change the network wireless to a new device

  How can I change the HP Photosmart 5520 for the new wireless device?

  How to configure laptop computers to print to the printer on the new wireless network?

  annax wrote:

  I looked through the user's guides, but could not find how to change printer to join another network wireless

  Can you please provide the steps

  I downloaded the manual and found your informtion on page 32 user's guide.

  http://support.HP.com/us-en/product/HP-Photosmart-5520-e-all-in-one-printer-series/5157533/model/5157535/manuals

  It's your support on the edit page and the connection of your printer.

• How could I give priority to my network connections, (without turning off the strap attached, as it took), so that it uses the internet from my main network connection?

  Prioritize network connections

  OK, here's the situation.
  I have a regular ethernet connection that provides me with a network and the internet.
  I have also a tablet PC which I attach to my PC so I can use it as a controller. (Not that it is important, but it's for a DAW/Midi controller)

  My problem is that whenever I place my tablet, PC starts by ignoring my normal connection and taking the internet from my Tablet (even when it is not connected to the internet). As a result, my internet is de-energized once I tie it, if I'm not as under the wifi on my tablet.

  My question is, how could I give priority to my network connections, (without turning off the strap attached, as it took), so that it uses the internet from my main network connection?

  Hello

  As well as the troubleshooting provided by Boumediene steps, you can also try the steps in this link. Some screenshots are also available on the link for a better understanding.

  http://www.howtogeek.com/HOWTO/27994/how-to-change-the-priority-of-wiredwireless-network-cards-in-Windows/

  Hope you will find this is useful.

• Change app category list

  Hello

  does anyone know how to change their category app on the app world. I got mine listed under "References and ebooks" but who want to change to 'utilities '. What do I have to pull down, then send it back?

  any help would be it is great!

  GP

  PS write this message from my playbook for free. so easy to tap on it

  ' Go to 'Manage products' in AppWorld "and click Edit next to the name of the product.

• How can I change my public network location at in Win7?

  On my server I am running Win 7 Pro 64 - bit (SP1) with an Ethernet cable to my router.

  I have several other network devices in my network, including wired and wireless, Win 7 PCs, PC Win XP and other facilities such as the backup network and media center.  I have problems with devices see each other (in particular my server) and the sharing of resources (files and printing).

  On my server, I am able to connect to the internet via my wired connection.  However, in the "network and sharing Center" under active networks I see "You are currently not connected to all the networks."  The link "Connect to a network" shows that I have no networks to connect to.   When I try to connect to my home group or create a homegroup, I said "To create or join a homegroup, network location of your computer must be on home."  Mine is set to public and I can't change it to make this change requires me to click on the home/work/Public icon/link in my active network and I don't have any network active (or inactive).  There is therefore no link to allow me to access the dialog box 'change the network location '.

  I tried (no problem found) network outages and homegroup troubleshooting (no problem found).

  I did do a Win 7 repair facility to solve configuration problems: I cannot access any network.  However, my original drive is an OEM Windows 7 Pro 64 bit without SP1.  Now that my machine was on SP1 for about a year, it does not allow me to do a repair installation, and the version on my machine is more recent (PLU) of what is on the installation disc.  Also, I considered uninstalling SP1, but which also failed.  An error message about missing files. I even tried uninstalling SP1 command-line and which also failed.

  What can I do to solve this problem before a thorough cleaning of your disc drive and a clean installation?

  ################################################################

  UPDATED: February 13, 2015 - finally fixed!

  The post on January 28, 2015 by BennyPootron led me to the solution.

  In RegEdit, to "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles", I deleted all the profiles under the present (I had three).

  In addition, "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Signatures\Unmanaged" were three matching items which I also deleted.  This clean slate, so to speak, and when I rebooted, I could change my location of home network and join my home group.

  Thanks to BennyPootron for the idea that led to my solution.

  I don't know if this applies to Windows 7, but it does not work in Windows 8 and Windows 10.

  (1) open 'RegEdit '.

  2) go to "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles".

  (3) find the location of the network

  (4) change the 'Category' DWORD to 1

  If this does not work, remove the key from the network, restart your computer and repeat.  It should work after that.

  Not exactly the answer, but what led to the solution.  FINALLY FIXED!   Here's how:

  In RegEdit, "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles" I had three profiles with names such as {4A3BFF36-4EA6-4415-AA5F-46CE449C95AB}.  I tried several things, including changing the DWORD value of the 'Category' 1 item in all three of these profiles.  It does NOT work.

  However, I have finally deleted all three profiles.

  In addition, "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Signatures\Unmanaged" were three matching items which I also deleted.  This clean slate, so to speak.

  IT WORKED!

  When I rebooted, I was able to change my network from the Public to the private, and he walked me through the process of joining an existing group established by another computer in our House.

  Finally almost 3 years after my original post, I have fixed the problem.

  Thanks to BennyPootron for the idea of a solution.

• After switching to Firefox I screen questioned on public networks. I think that I have granted access. How can I change this?

  Running Windows 7. Past from Internet Explorer to Firefox. A message screen came the next time I used Firefox questions on public networks. I think that I granted access to public networks, and I don't want that. How to change that?

  This sounds like a problem of Windows Firewall. To change this back it is possible to access this setting of the firewall.

  • Configure the firewall if Firefox can access Internet

• change public network to the private sector

  I'm working on a laptop HP Envy Touchsmart.  Model number is 15-j057cl.  He had a serious hard disk crash, and I am trying to recharge using the USB stick recovery at HP, because there is no CD/DVD drive.  Windows 8.

  All the drivers are loaded.  I have an internet connection via a wireless network, but not through the wired one.  All of the other PCs in my office are working very well, wired and wireless.  The cable network presents itself as an unidentified network and is a public network.  I've hunted in Microsoft and HP to find out how plugged it, identified and classified as a private network.  I have the link on the laptop and the network switch lights.   I changed the Cat5e cable with a good I use on another PC and still have the issue.

  The wired NIC Realtek PCIe GBE does not have DNS information, as it is constantly with the default Microsoft IP of 169.254.64.151.

  Any help would be appreciated.  Wireless connectivity is fine when you are mobile, but in the environment of office stationery, I need the wired connection speed.

  Hi RalphJones,

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I see you have some connectivity issues with your Ethernet connection. As a private network to do what you need to do is set a password on the network. You need to talk to your the one that supplied to your wireless router.

  We will try a few things. First let's make sure that you do not use a Proxy Server. To do this, follow the steps below.

  Step 1: Open your Internet Explorer to your desktop computer from the Apps page

  Step 2. Click Tools and then click Internet options
  Step 3. Click the Connections tab, and then click LAN settings
  Step 4. Select the use a proxy server for your LAN check box
  Step 5. In the address box, type the address of the proxy server
  Step 6. Check "automatically detect connection settings.
  Step 7. When you have finished your changes

  Step 8. Click OK and then click OK again

  Then press the Windows key and 'R' to open the command run and then type cmd and press ENTER. This will bring up your command prompt and type ipconfig and press ENTER. Enter the default gateway, because it's your router. Then use the Ping section and this document howtogeek.com DNS server problems to see if you can reach the Web page of the router.

  If you can not reach the router then we will examine reseting the TCP/IP stack. Go to your command prompt and type netsh winsock reset catalog, and then press ENTER. Then type netsh int ip reset reset.log and press ENTER. Then, restart your computer. This will reinstall the protocols internet on your computer in case it has been altered.

  Thank you

• How to change a unsecure network connection?

  My sister-in-law's computer connects to a wireless network that is not guaranteed... How to change t safe?  If I need to, with help, let me set up a new SECURE connection.  She scares me a little that she uses a non-secure network.

  Help, please...

  ~ Rosie ~.

  Because I'm not sure which router you have that's going to be quite general.

  Click Start, go in run, type "CMD" and in the command prompt, type "IPCONFIG" no citation.

  Find the address of a default gateway and enter this address in the address bar of your web browser. You will be asked to enter a user name and password. It is common that it is admin/admin, admin/password, admin/1234. After getting that distant and connected, an update so that we can better you go after knowledge that makes your router. If you happens to go there and feel comfortable going forward, look for the wireless settings tab and there should be a sub-category of security. Use WPA2-PSK, whatever you ask for password will be your new password in order to access your wireless network.

• WiFi network tells me it is not secure and it is on the public network. How can I make private?

  Original title: privacy

  My wifi network tells me it is not secure and it is on the public network. How can I make private?

  You must go into the router settings to change that.  What brand/model is your router?  If it is integrated into your modem?

  You must set a network password that prevents people without using your wireless network.

• How to change the connection to a wifi network?

  PIC - developer preview
  I entered a wrong connection when connecting the first time to the network, I can not understand how to change it.

  Hi Olivvv,

  Thank you for your question about Firefox OS! You can remove the network (and the credentials you entered in this first time) as follows:

  1. go to settings > WiFi

  2. scroll the advanced settings and press the button 'manage media '.

  3. press the button "forget network".

  Alternatively, you can type the network name in the list on the screen of WiFi and tap Forget in the upper right.

  4. then, you want to enable / disable WiFi, find your network of your choice and enter the credentials again.

  Let me know if you need more help,

  Best,
  Michelle Luna

• How to change network name on Time Capsule

  Hello

  I want to change the name of the network on my Time Capsule, to match that of my home, all other routers network so I can use it as an access point more easily.

  How should I do it under OSX?

  Thank you.

  Open Airport utility, click on the Time Capsule icon, then click on modify in the window pop up.  Then go to the wireless tab, network name can be changed here.

• How will I know if my Airport Extreme has the latest firmware?  And (not related) how to change the password used to connect to my network?

  I think I bought the latest version of Airport Extreme.  It is the unit which is rectangular, is about 6 to 7 w., etc.  I have some basic questions that I do not understand:

  1. How will I know if I have the latest firmware for this device?  I read a few posts that make it sound as if it was just automatically updates.  Is this true?

  2. can someone tell me how to change the password used to connect to my wireless network?

  Thank you very much!

  Chris

  If a firmware update is available, AirPort Extreme flashes orange.

  The most up-to-date version of the firmware is 7.7.3.

  You can see what version you currently have the following on your Mac...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Extreme

  Look for the Version

  If the new firmware was available, you will see a button update here

  To change the wireless network password...

  Click on edit in the window smaller than you watched just to check the firmware version

  Click on the Wireless tab at the top of the next window

  Go back / change the wireless password and enter a new password

  Do the same thing to check

  Click Update at the bottom right of the window and give the airport a minute full for restart