How to change administrator in Windows 7

Similar Questions

• How to change language professional window 7

  How to change language professional window 7

  You can add a few details (like you want to add or modify). Too bad

  Display language - change - Windows 7 Help Forums

• I inherited a school with windows xp computer. I am trying to install a new printer, but get the message that I can not add unless I am the administrator of the computer. Any ideas how to change administrator or bypass this message?

  I just want to be able to add my new printer, but I am at least the third person to use this computer.  Any ideas on how to change the Administrator information or in order to bypass the message would be appreciated :)

  I know that he used a CD image, you could burn and start (was a linux kernel) which allowed to replace the name of the admin account and password... I forgot all the details about it but, as it was last 5 years that I used it.  It is possible.  Just keep looking.

• How to change the title Windows Applet in EBS 11.5.10.2?

  Dear all, would like to check how to change the title of Windows Form Applet in EBS 11.5.10.2?
  
  
  Thank you.

  Hello

  Anyone know how to change the wording of the part of the red rectangle?

  Check my previous answer, it answers your question (connect on the responsibility of the system administrator and go to profile > system, search for the profile name and change it to the level of the Site).

  Kind regards
  Hussein

• How to change language on Windows on HP Pav TS 10-e009au 8.1 system recovery

  Hello..

  I have HP Pav TS 10-e009au

  REF.: F6C20PA

  theres on operating system problem,

  can I use factory reset the Manager of recovery, but when the process is almost over, language change in Chinese...

  I was so confused,

  Help, please... How to change the language to English again?

  #Sorry on my tongue, I'm from Indonesia

  Hi odoys,

  Welcome to the community of HP, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I see that you have a problem with the language when installing Windows 8.1. Actually finished installation? If yes then watch this video on YouTube and it will guide you to set your language than English. The poster goes his language from Japanese to English, but whatever the language, the menu options are in the same place.

  Thank you

• How to change to XP Windows Vista mode

  I have Windows Vista on my laptop. Through some sets of strikes - unknown to me - UI went into a mode that looks like Windows XP. For example, in the lower left corner of the screen, instead of the Start button round with the Windows logo, I see a square with the word "Start" button How to switch to this mode and in Vista mode? Thank you.

  Hello

  You need to change the desktop theme.

  Right-click on an empty area of the desktop - customize set - Windows Vista theme - apply / OK.

  How to change Vista desktop theme
  http://www.Vistax64.com/tutorials/87194-theme-settings.html

  Change desktop theme
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-desktop-theme

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to change language of windows system 7 starter from Italian to English?

  I bought a laptop from the Italy and have a windows 7 edition starter pack.

  I know how to change the system of Italian language to English of wana?

  concerning
  Aditya jony

  Use this tool:

  http://www.froggie.SK/index.html

  André "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Windows Photo Viewer - how to change the default Windows Photo Viewer options so it will open the images directly in 'Real size' rather than the auto zoom

  Windows Photo Viewer - full size

  Hello

  Is there a way to change the default Windows Photo Viewer, so it will open the images directly in 'Real size' rather than the auto zoom?

  Thanks in advance, Yoni.

  Hi Yonikl,
   
  1 let me know the format of the file that is causing the problem?
  2. you have any third party photo editing and look at a software installed on your computer?
  3. do you have any recent software or the hardware changes on your computer?
   
  If there is any third party even software uninstall and check if that helps.
   
  You can follow these steps below to set the image at its actual size while watching.
   
  To display the image at its actual size, click actual size . To make the entire image enters the Windows Photo Viewer window, click on adjust to the window.
   
  For more information you can visit this article for assistance below.
   
  View and use your pictures in Windows Photo Viewer
  http://Windows.Microsoft.com/en-us/Windows7/view-and-use-your-pictures-in-Windows-Photo-Viewer
   
  You can also try to download and install the Windows Live Photo Gallery and check if the problem persists.
  http://download.live.com/Photogallery
   
  If the problem persists then you can try these steps below to create a new user account and check if the problem persists.
   
  Create a new user profile.
  Now you must create a new user account and check the question of do you need to follow the steps
  below.
  a. open user accounts by clicking the Start button.
  b. click Control Panel.
  c. click on user accounts.
  d. family Safety.
  e. click on user accounts.
  f. click on manage another account.
  g. If you are prompted for an administrator password or confirmation.
  h. type the password or provide confirmation.
  i. click on create a new account.
  j.Type the name you want to assign to the user account.
  k.Click an account type.
  l.Click create an account.
  Now search for the question.
   
  If you still face the question, then you can follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• How to change the default (Windows 7) painting 'Save as type' JPG (from PNG) format when recording using the * only * the keyboard?

  This is the 2nd time this same question, the 1st time that I was given an irrelevant answer which was not helpful at all. Please take the time to read and understand what I need to before you answer.

  I just need to learn how to change the default PNG to JPG, so every time I save a screenshot using (only) the keyboard, it will already be showing JPG as the "Save as type". I am sure that it requires an edit registry so just point me in the right direction and guide me on how to do it, that's all I need.

  To help you understand my dilemma, I take a lot of screenshots and Ctrl + V paste in Paint almost daily. Since my physical disability in my arms causing me pain and discomfort when I use the mouse, I avoid using the mouse I use the shortcuts as much as possible to help reduce the constant pain, I'm still in my right arm when using the mouse. I hope I have explained well enough details.

  If it's in the wrong place, please move to a better place.

  Thank you

  Lee

  I don't know of any registry value, but you can use the key sequence to "Save as jpg.

  ALT

  F

  V

  J

  The F key may be pressed simultaneously with the ALT key or after him.

  You can reduce the number of keys to just ALT plus a digital key by using the following, adapted from one method described HERE.   Setup is much easier with a mouse, but can be done using the keyboard only.  I showed you the controls and mouse shortcuts keyboard to add an icon "" Save as JPG"to the Quick Access toolbar.

  Open Paint

  Mouse	Keyboard equivalent
  Click on the file Menu (upper-left)	Press ALT + F to open the file Menu
  Hover mouse on ' Save as ' to open the list of file types	Press V to view the list of file types
  Right click on JPG to open the context menu	Use the TAB or down arrow key to select JPG and then press SHIFT + F10 to open the context menu
  Click "add to quick access toolbar.	Press A to "add to the Quick Access toolbar.

  At this point, your installation is complete.

  With open Paint, press the ALT key .  This will display the keys associated with various actions.  In my case, "" Save as JPG"icon that has been added to the Quick Access toolbar was the fifth icon (after save, undo, redo and print).  So, to "Save as JPG," I would press ALT+5 (even once, you can press 5 either with or after you press the ALT key).

  

• How to change administrator to a user account account

  I am running Win/7 and as soon as he woke up my computer, I have never signed with username or password so guess it's encrypted? I used my administrator account for everything since I got my computer (about 2 years). I read this isn't safe and leaving me vulnerable to viruses, etc... I do not know how to open a new user and set it up to make it work with my Outlook account.

  
  
  So much to learn about computers, so little time... Any help is greatly appreciated...

  I am running Win/7 and as soon as he woke up my computer, I have never signed with username or password so guess it's encrypted? I used my administrator account for everything since I got my computer (about 2 years). I read this isn't safe and leaving me vulnerable to viruses, etc... I do not know how to open a new user and set it up to make it work with my Outlook account.

  
  

  So much to learn about computers, so little time... Any help is greatly appreciated...

  Hello

  If you put computer to sleep after a certain period of time, perform the following steps.

  Open Control Panel / Power Options.

  In the left menu, select require a password on wake up.

  In the next window, click on change settings that are currently unavailable.

  In the section protection of password on wake up , select the require a password (recommended).

  Click the save changes button.

  Let us know if that helps.

  Concerning

• How to change the login Windows to Toshiba screen?

  Can you help me?

  How can download stuck for the logon windows change... I want to change Toshiba opening screen of windows welcome screen...

  Windows logon screen cannot be changed.
  You can change the wallpaper but not the logon screen.

• How to change my current Windows Hotmail email address?

  Original title: A company, that I got was their pirate system.  It is possible, that my email address may have been compromised.

  If I need to change my current email address how do we do that?  I will always with hotmail, but you may need to change the address?   Right now I'm not sure that change is necessary, but I will be ready if needed.  Appreciate all the information.

  Hi ruffoa,

  (a) I recommend you install anti-virus software that will help protect your computer against viruses, worms and other security threats.

  (b) in addition, make sure that you have installed on your computer, antivirus software was last updated so that it works correctly.

  You are using a Hotmail account, I recommend you to ask your question in the support forum for Windows Live Hotmail using:

  http://www.windowslivehelp.com/forums.aspx?ProductID=1

  Reference: Windows Live Hotmail Top issues and Support information

  Hope the helps of information.

• HP envy 5530 print too small to read more... How to change it w/windows 8 & Firefox... Help

  How can I change w/windows 8 & Firefox... Help... I have searched the forums, but can't find anything to help with the exception of windows7... I have windows 8 - I can NOT READ the IMPRESSION THAT COMES FROM THE ENVY5530!  PLEASE ANSWER!

  mygkids,

  Welcome to the HP Forum.

  You seem desperate and I'm sorry that it does not work.

  We don't quite know what you do or what you have tried to solve this problem.

  Here's the deal: a large part of the time, the difficulty has to do with the Application using a and printing scale selects prior to sending the document to the printer.  Usually we use print preview and adjusts the scale / size of the print goes to the printer.

  Some of the standard 'patches' are provided here:

  Change size print with preview before printing

  An exception / example:

  A member of the forum has recently indicated that it was necessary to print a particular type of medical output in the form of a program - form was printing with the evil of his printer font size when the same form printed the correct font to the printer at the office of his employer.  Involved workaround Print print output in a PDF file and preview the form to adjust the scale and correct the desired result.  It is not the desired solution; It produces the desired result.

  The point: what you need to do to fix your problem depends a lot on what you do in the first place.

  If nothing only that you can find help, HP Technical Support can ask for help.

  If the printer is new (ish) and you are in a certain geographical area in the world, you can always have a telephone support on the printer - you can call HP for support.  We can always ask to see if this is the case.

  Phone support period
  One year of phone support is available in North America, Asia Pacific and Latin America (including the)
  (Mexico). To determine the duration of phone support in Europe, the Middle East and Africa, go to
  www.hp.com/support. Paying company switchboard.

  Reference, Page 85: 5530 HP Envy eAIO User Guide

  Printer drivers HP e-all-in-one ENVY 5530

  =========================================================================

  Support Portal worldwide

  Contact telephone support HP - USA-

  Guarantee required - us. and Canada

  USA - contact HP / / Self-Help-Email - Chat

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Click on accept as Solution when the answer is a good solution or workaround!

  Although I strive to reflect best practices of HP, I do not work for HP.

• How to change vista to windows 7

  If I installed a windows 7 dvd on my computer (windows vista), I want to change it by not using is not windows 7 back in windows vista

  You mean change from Windows 7 to Vista?

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• How to change administrator?

  I took the PC of my wife who was Ad. originally.  She now has a Mac.

  Create a new Standard user account for yourself based on the following recommendations:

  User - recommended configuration (Vista and Win7) accounts

  You absolutely don't want to have only one user account. As XP and all other Windows 7, Vista, and modern operating systems are operating systems multi-user with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges on Vista and Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it may require more work you want to do. Better not to get into a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  MS - MVP - Elephant Boy computers - don't panic!