How to change an element from a 2D array?

Similar Questions

• 2 How to remove an element from the tree and the database block tree?

  Hello
  
  2 How to remove an element from the tree and the database block tree?
  
  Kind regards
  
  Abdetu...

  The problem is caused by not sending forms is not a VALIDATION of the database because he thinks that there is no changes to save.

  Forms does know that changes to the data block, he does not know the changes made by the PLSQL INSERT, UPDATE, DELETE calls and procedure.

  Try to remove the line to block, rather than using a DELETION like that...

  go_block ('INSP_EQUIPMENT_TYPE');if form_success then   do_key ('DELETE_RECORD');end if;
  
  
  

  If you wish to continue using your original DELETE instead of my change above code, you can use different techniques to force forms to issue the COMMIT to the database, including this one...

          DELETE ...        FORMS_DDL ('COMMIT');
  

  Be careful... This will be the VALIDATION of the database, but the changes to the data block will not be sent to the database!

  I posted a few other ways to issue a VALIDATION of forms here
  www.seeristic.com/Forum_Posts/Forms_COMMIT.txt

• How do change scrollViewProperties scrollMode from vertical to horizontal so change the screen from portrait to landscape orientation

  How to change scrollViewProperties scrollMode from vertical to horizontal if the orientation of the screen change mode portrait mode to landscape?

  I try like this, but not work

  {OrientationHandler}
  onOrientationAboutToChange: {}
  If (orientation is UIOrientation.Landscape)
  scrollViewId.scrollMode = ScrollMode.Horizontal; scrollViewId-> id scrollView
  on the other
  scrollViewId.scrollMode = ScrollMode.Vertical;
  }
  }

  Thank you

  Hi, I changed the code like this and works

  {OrientationHandler}
  onOrientationAboutToChange: {}
  If (orientation is UIOrientation.Landscape)

  scrollViewId.scrollViewProperties.scrollMode = ScrollMode.Horizontal;
  on the other

  scrollViewId.scrollViewProperties.scrollMode = ScrollMode.Vertical;
  }
  }

• How to change the tab order of an array of clusters?

  How to change the tab order of an array of clusters?  I have the cluster arranged into a table in the front panel.   The element of the cluster passes horizontal and array element passes vertically.   When I press the tab key, the cursor will move to the item next to the table instead of the next item in the cluster (down to the place overall).

  so you have an array of clusters or cluster and the separate table?

• How to change default browser from Yahoo to Google on Android?

  I wonder how to change the default browser on Firefox from Yahoo to Google. I personally prefer Google for research and who want by default if it is possible

  Hi devinat1, if the battery-dot-3 icon does not appear, it means that Firefox has detected a button menu 'material' on your device. In general it's near the home button below the screen. If you can't find a menu button down there, do you want to talk about device you have? Perhaps one of the volunteer support can figure out what is happening.

• How to change the location from the computer to the India

  original title: as I used my dell windows me in Japanese and now I want to change the English version and I m currently located in India, how to change

  I m using Japanese language on my ThinkPad from IBM, Microsoft Windows Me from my PC laptop Dell and now need to change the English version

  Hello

  You can validate the query in the link mentioned below for assistance.

  http://support.Microsoft.com/ph/6519

  Hope this information helps.

• How to change the resolution from Adobe?

  Hello

  I can't change the resolution from Adobe Acrobat Pro XI. All my other programs seem normal, but Adobe's "In-your-face" and everything is so great.

  How can I change the resolution from Adobe is no longer scale on my laptop and two monitors?

  
  Your help is appreciated.

  Hi mooshtie,

  Could you please specify if you wish to reduce the size of the PDF icons or icons of the toolbar.

  See the following link and if it is useful:

  How can I reduce the size of the icons in the toolbar? (Accessibility)

  Let me know.

  Kind regards

  Ana Maria

• How to change the screen from Portrait to landscape?

  I changed my screen from landscape to portrait years ago and now I can't go back.  My screen went out and I use a borrowed on the side for now, quite the hassle.  Any ideas?

  Hi DavidMortensen_907,

  • What happens when you connect your monitor to the computer?

  I suggest that you connect the monitor for which you want to change the portrait view and then go to the link thread with similar problem and try the steps mentioned, check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/switching-between-portrait-and-landscape-display/9bdea91e-3e86-4e19-9E23-97193b63e5cd

• How to change the system from Vista Home Premium to Vista Ultimate 64 withoute lose the option of HARD drive backup?

  IM now running Vista Home Premium 32. I would like to change the system for Vista Ultimate 64 so I can run more than 4 GB of memory. Now Ive some factory settings if something happened, I can run my HARD drive restore. My question is how to change the Vista 64 operating system, so I can keep the recovery on my hard drive partition?  Mayby there is some kind of upgrade cd?

  Thank you

  Hello

  32-bit to 64-bit is not an upgrade

  It must be done with a clean installation using a full version ' / Ultimate 64 bit license

  Contact the manufacturer of your computer for more information on getting 64-bit ultimate, which I doubt they will always

  and microsoft sells more vista

  they moved on windows 7

  and you are supposed to make this partition recovery disks to reinstall vista

  ask the manufacturer of the computer how to

• How to change the language from English to Arabic Windows?

  Original title: change the function from English to Arabic

  I have windows vista Home premium English characteristic. Can I change the Arabic service. Thank you

  Not with Windows Vista Home Premium, you would need to upgrade to Vista Ultimate Edition and then change the language.

  "FALAH_42" wrote in the new message: * e-mail address is removed from the privacy... *

  I have windows vista Home premium English characteristic. Can I change the Arabic service. Thank you

• How to animate an element from one point to another with Create.js?

  Hello

  I want just to animate an element from one point to another.

  But the components are moving and animation, which is not much help.

  I saw this code on the page of create.js - createjs. TweenJS.get (Logo) .to ({x: 500}, 1000)

  But I can't seem to do anything to my instance of Logo.

  Any help would be appreciated!

  Kind regards and thanks in advance.

  This should be:

  createjs. Tween.get (this.) Logo) .to ({x: 500}, 1000)

• Tree control: how to change an element

  I know how to create a tree. It's very pretty.

  The next natural step is to edit something:

  For this example, let's say I have a level superior element called 'Rob' and he has two children "Nora" and "Caleb". The names are the values of the "chain of cell to the left" and tags, we will tell you. Nora is 4 years old, Caleb is 1, so when I create the tree I make tables 1 d of these values and put them in "text of the child".

  Now, I leave the program going until the beginning of November and the day of the anniversary of Nora I want to programmatically change the '4' to a '5 '.

  There are methods add an element and remove the element, but no method of Edit Item.

  Call me puzzled. This happens on the list of 10 things.

  Meanwhile, someone would have an answer to my quandry? Thanks in advance.

  Follow-up: When I invoke add something, I have a string output. What is c? The tag assigned, I guess? Aid does not mention it. It's a trick question, because I don't actually think it is possible, given the add part function works when you call it twice in a row with the same entries.

  P.S. "you're a jerk" is certainly a reasonable response to this post.

  I played a bit with tree controls. You're right, they are not really intuitive.

  Here is an example of one that I go fairly reliable... http://decibel.NI.com/content/servlet/JiveServlet/download/3968-1-4990/m3u%20playlist%20generator.LL...

  I think you need to do is on the tag active that you want to change (property node) "Active: element tag.

  Then you can write to the property "Active celltring '.

• How to change address billing from one country to another

  I moved from the United Kingdom to South Africa and my current credit card is linked to my new address here. However I can't update my billing information, because the field where I enter my zip code does not accept the format of my current zip code (which is different from my old)

  The country of your payment address, the country on your Adobe account and the store you purchase of should be the same.

  FAQ: How can I change the country associated with my Adobe ID?

  FAQ: How do I change my credit card information?

  You can contact our support for assistance staff:

  FAQ: How to contact Adobe for support?

• How to change PS Elements 8 to 14?

  Can I switch to PS Elements 8 to 14?

  If so, how?

  Apparently, there is a small discount during the upgrade, compared to download full versions.

  My 30 day trial has expired, but the windows of payment let me down

  and won't let me move forward.

  The upgrade/payment procedure appear to be inversely proportional to the quality of the software PS itself.

  THX.

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• How to change the dpi from 72 to 100

  Hello

  I'm relatively new to Photoshop and mostly self-taught. I am creating a backdrop that is 13' x 8.5 '. I had to create the image at 13 'x 8.5' and I guess that the CIO was set at default 72. The printer needs the file to be in the less than 100 dpi at print size, but I can't figure out how to do this. I've already resized my file and double registered (a resampled and the other does not). How to check and change the dpi and to understand which is the best resolution, or I need to completely recreate the image? Any advice would be greatly appreciated. Thanks in advance!

  Hello

  Greetings!

  Open Photoshop

  Click on the Image-> Image size and change the value of resolution there.

  Click ok.

  Concerning

  Jitendra