How to change and bind the NAV tabs. ?

Similar Questions

• How mode change and get the coordinates of the text frame?

  Hello.

  There are two questions.

  1. how to change fashion using JavaScript?  writing-> selection

  ->

  2. how to get the text frame coordinates?

  Thank you.

  1 app.toolBoxTools.currentTool = UITools.SELECTION_TOOL;

  2. f.geometricBounds (where f is your block of text).

• How to change and synchronize the capture of three cameras in LR5 time?

  Is it possible to edit and synchronize the capture of three cameras in LR5 time? I edit capture time and I am sorting photos by capture time, but they always display as individual devices.

  Thank you

  Triple-check that you set the year, month, day, and hour just fine.  Given the small fonts and the gray color scheme hard to read, it is not uncommon to miss that you have set the wrong year, for example.   If this still doesn't help, please post a screenshot of high resolution of your view of LR showing the problem. Make sure you have the date/time showing under the library thumbnails (view > View Options).  (You cannot attach the screenshot of an email response - you need to get back on the Web to download).

• How to change and reload the JavaScript code without restart Acrobat?

  As a programmer, I wonder if there is a better way to do things that I don't yet understand.

  At the moment I write code in Notepad ++, save it in the folder of Acrobat Javascripts, open Acrobat, test the code and find it does not work (no surprise ).

  I then have to close Acrobat, change the code in Notepad ++, save, open Acrobat and still know that this does not work.

  Rinse and repeat for a lot of time, especially at the beginning of a new 'script project.

  The JavaScript debugger is great, but unless there is something I don't know, won't let me edit the code directly in its window.

  As you worked on already I am referring to the folder level scripts, so the JavaScripts 'Document', "The value of the Document Actions" and perhaps even the buttons "Edit all JavaScripts" are in fact unnecessary.

  Adobe Acrobat and Adobe Reader... is step by step Visual Studio and I don't want them, but please tell me there is a way to write a little more on-the-fly code

  Thank you!
  Roberto

  As a plugin developer I'm very used to this, there no way to make Acrobat plug-ins to recharge. I doubt there is a way to make Acrobat reset JavaScript either.

• my computer is locked in the options admistritive and I for got my password. How to access and fine the password or change it?

  my computer is locked in the options admistritive and I for got my password. How to access and fine the password or change it?

  Hello dianeweeks,

  Thanks for the reply.  I have included a link below that I hope will help.

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

• I use windows 7. How to change and be sure the default column width in Windows Explorer

  I use windows 7. How to change and be sure the default column width in Windows Explorer

  Hi Jimsw,

  ·         If it works well before?

  ·         You did changes to the computer before the show?

  Explorer Windows will remember changed settings, check if this not happen as planned.

  Follow the suggestions below for a possible solution:

  Method 1: I suggest running the fix of the article and check if it helps.

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  Method 2: You can increase the width of the selected columns and apply the settings to all files and check.

  a. right click on an empty space in the Windows Explorer, click on sort by.

  b. now, enter the size required in the Pixel with and click OK.

  Now, click on the drop down menu to organize and click on folder and Search Options.

  Click view and click apply to folders and click OK.

  I hope this helps.

• How can I get FF to open a web site in a new tab and keep the old tab so I can come and go?

  If I'm in a web site that contains other links, I want to be able to open the new link in a new tab and keep the original tab so I can switch back.

  When you click on a link that is on a right click of the Web page and click on "Open link in a new tab" this will open the new page in a new tab and keep your old tab open. If you want to open a new tab without clicking on a link on a web page, click on the button "+" near your tabs currently open.

• left-click on the icon of firefox in the taskbar displays a list of all the tabs. How to open just to the last tab?

  I use the tab grouping feature a lot. It means that I have 100s of tabs open at any time.

  The problem: once a switch between tab groups, the Firefox icon in the task bar changes in what looks like multiple echoes of the Firefox icon. I guess this is supposed to represent several groups of tabs.

  Before the 20th of Firefox might click on the Firefox icon in the taskbar, and would come to the top and show the last tab, I worked on Firefox.

  Since Firefox 20 a left click on the Firefox icon in the task bar now displays a list of the 28 tab + seemingly random tabs. Many of them said only: "Mozilla Firefox" instead of the site represented by this tab (because the tab has not been accessed recently).

  To open Firefox to the last tab, that I worked on is now a real chore. I now have to choose one of these tabs 28 + (which is 99% of the time the tab bad), then switch to the Group of the appropriate tab and then find the tab I've worked on. It usually takes 5-10 clicks to get back to where I was before I've minimized Firefox, or before that Firefox has lost focus. (In the past I could simply click on the Firefox in the taskbar, and restored Firefox icon where I left last.)

  How can I disable the list that is displayed when a left click or move the mouse over the Firefox icon in the taskbar? I would like the ability to minimize/restore Firefox by clicking on the Firefox icon in the taskbar, as it was in the past, do not get a choice of random tabs.

  I think that I thought about it. Under OPTIONS > OPTIONS > TAB, uncheck the box for "Show glimpses of tab in the Windows task bar" and then click OK

• How to copy and paste the touchpad on a Toshiba portable computer Satellite C655 S5505 windows 7?

  OT:touchpad.

  Hello, can you please suggest how to copy and paste the touchpad on a Toshiba portable computer Satellite C655 S5505 windows 7.

  It worked a few days ago... I don't know what I did so that it does not work right. I like to copy and paste when right or click with the left button of the touchpad... They have a key on the Panel of key with copy and paste and cancel and cut options next to the bar area to the right of the ALT key with lines and an arrow on the key... Always like the old mode right click and copy and paste from the touchpad... Thank you

  Hello

  Check with the manufacturer of system support, documentation in line, or forums as there probably
  are shortcut keys that enable and disable the touchpad functions.

  Toshiba has also map of keys which allow easy adjustment of the TouchPad. See support for Toshiba
  and Forums. The key shortcut for the TouchPad, if they are responsible in the Fn + F9 or see the key card
  So usually loaded at the top of the screen.

  There is also usually a TouchPad control utility that loads in the Notification area next to the clock
  at the bottom right.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad
  entries) and some have a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  This utility also allows to control the TouchPad:

  TouchFreeze
  http://code.Google.com/p/TouchFreeze/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to replace "Withdrawal on the right tab" character?

  Hi all

  I want to replace "Tab" and "Withdrawal right tab" text "< TAB >". Replace 'Tab' works very well. How to replace "Withdrawal on the right tab"? Here is my Code.

  var myParaContents = app.selection [0] .paragraphs [0] .silence;

  myParaContents = myParaContents.replace ("\t" ","< TAB >"");     This code replaces '\t' to '< TAB > ". Like that, I want to change the withdrawal right tab character.

  Alert (myParaContents);

  Thank you and best regards,

  Robert S

  Try this,

  var myParaContents=app.selection[0].paragraphs[0].contents;
  myParaContents = myParaContents.replace(/\u0008/g, "");
  alert(myParaContents);
  

• How to enable and disable the part of the "control panel".

  I want to know if part of the control panel can be turned on and off by an external action, to use the mouse or a Boolean variable. Someone has an idea that help color? Thank you

  Ricardo

  You can disable cookies by using the node property and ownership "Disabled". You can create a tab control and disable the entire tab control that will disable all inside of it.

  To do this programmatically, set up your code with a structure of the event and create an event when the user changes the value of a button or click the mouse.

  See the example I did:

  

• How to compile and install the kernel modules after nation and nipalk for installation of Gentoo 64 bit?

  We are trying to install a PCIe 6251 DAQ card in a box of Gentoo 64 bit running Linux kernel 2.6.28 - gentoo-r5 4.3.2 - gcc and glibc - 2.8.  We have installed RPM utilities to manage the installation.  The current problem is that we are not able to compile and install the kernel modules: nidmxfk, nimsdrk, nimstsk and nipxirmk.  Here's a summary of what we have done so far, and to what extent we got.

  First of all, we have changed the configuration of the kernel that we could export the init_mm unused symbol by changing the configuration option of the CONFIG_UNUSED_SYMBOLS = o kernel and recompile the kernel.  Then we installed LabView 8.6.1.  Then we ran the nation 1.9 installer who has installed the source code in vain on the compilation.  To resolve this problem, we have changed the function of pte_offset to pte_offset_kernel by editing the file/usr/local/natinst/nation/configures following the instructions here:

  http://decibel.NI.com/content/docs/doc-4511

  We were then able to compile and install the kernel nation module thanks to:

  . / configure
  do
  make install

  lsmod said that nation has been properly installed.  Then we ran the installer for DAQmx 8.0.1 by:

  . / INSTALL - nodeps

  To do this, we have received errors indicating that LabView support could not be installed because check addictive (incorrectly we think) stated that labviewbase86 has not been installed; This caused the installer to have an abortion.  Therefore, we refused to install support for LabView 8.6 and revived the installation program which produces the output:

  Installation of the driver NOR-DAQmx Distribution of Linux Installer version 8.0.1f0...

  Already to jump Edward - 1.9.0 - f0.noarch.rpm installation, same or newer
  installed.

  Pre Installation...

  Preparing... ########################################### [100%]
  1:nitimingi ########################################### [ 4%]
  2:nipalki ########################################### [ 7%]
  3:nipali ########################################### [ 11%]
  RC0.d directory not found, startup script is not accredited with init levels.
  4:labview80 - rte # [14%]
  5:ni653x ########################################### [ 18%]
  6:nicdigi ########################################### [ 21%]
  7:nidaqmxcapiexmp # [25%]
  8:nidaqmxcapihelp # [29%]
  9:nidaqmxcapii # [32%]
  LN: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory
  10:nidaqmxcfgi # [36%]
  11:nidaqmxef # [39%]
  12:nidaqmxhelp # [43%]
  13:nidaqmxinfi # [46%]
  14:nidaqmxswitch # [50%]
  15:nidimi ########################################### [ 54%]
  16:nidsai ########################################### [ 57%]
  17:nimdbgi ########################################### [ 61%]
  18:nimioi ########################################### [ 64%]
  19:nimru2i ########################################### [ 68%]
  20:nimxdfi ########################################### [ 71%]
  21:nimxpi ########################################### [ 75%]
  22:nimxs ########################################### [ 79%]
  RC0.d directory not found, startup script is not accredited with init levels.
  23:niorbi ########################################### [ 82%]
  24:nipxirmi ########################################### [ 86%]
  25:nirpci ########################################### [ 89%]
  26:niscarabmm # [93%]
  27:niscxi ########################################### [ 96%]
  28:nistci ########################################### [100%]

  After Installation...

  At this point, after reading this report, we used the Gentoo rc update utility to add several scripts for the boot runlevel initialisation:

  update of RC - a boot nipple
  update of RC - a bunch of nipxirmu
  update of RC - a bunch of mxssvr
  update of RC - a bunch of nisvcloc
  update of RC - a bunch of nidevldu

  When the computer reboots, you get an error message indicating that the following kernel modules are not: nidmxfk, nimsdrk, nimstsk and nipxirmk.  lsmod shows that the nation and nipalk are installed, but no other kernel modules NOR are present.  modprobe-l shows that only nation and nipalk are available.

  So we have several questions:

  1. we install drivers in the correct order?  Should use us NI-VISA 4.5 or NOR-488. 2 rather than DAQmx 8.0.1?

  2. What kernel modules should be loaded for this equipment run?  How to compile and install the ones that we have yet, specifically nidmxfk, nimsdrk, nimstsk and nipxirmk?  Are there others?

  3. How can we get the installer to properly recognize that we have installed LabView Core and install support for LabView?  Are there additional kernel modules related to the support of LabView?

  4. What is the symbolic link that was not created in the DAQmx installation report? (ln: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory)?

  I apologize for so many questions, but these seem to be the last obstacles to obtaining OR runs correctly on this system.  Is there other information that we can provide that would be useful?  Thanks for any help or suggestions you can offer.

  Craig

  Hey Craig,.

  Given that you use 64-bit Linux all kernel modules must be compiled for 64 - bit.  User mode binaries can be 32-bit, assuming that you have installed the 32-bit support libraries.

  NOR-DAQmx is a complex architecture and requires several kernel modules to support your PCIe card.  Most of these kernel modules have not been brought to support 64-bit Linux.  Some kernel modules are components infrustructure that are shared with other pilots OR as NI-VISA and NOR-488. 2 and have been brought to support 64-bit Linux.  Unfortunately, you need all the modules to use your hardware.

  I hope that answers your question.

  Shawn Bohrer

  National Instruments

• The appearance has changed, and even the Start button is no longer a circle but the former rectangle that says start after the installation of an update.

  I recently installed an update of Windows for Vista.  The appearance has changed and even the Start button is no longer a circle but the former rectangle that says start.  How can I get the old look back with on the uninstallation of the update?  Thank you

  Original title: updates

  Hello

  It seems that the update was for graphics, as it changed the appearance

  If the update is the problem, you will need to remove it or download and reinstall the graphics driver from your computer or the manufacturer of the graphical Web site map.

  _________________________________________

  Read this information about updates:

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Menu start no longer displays options to shut down the computer, someone knows how to change that? The power options menu did not help.

  Menu start no longer displays options to shut down the computer, someone knows how to change that?   The power options menu did not help.

  When this happened to me, it was malware that didn't stop my computer, probably because she wanted to do something with it. I held the power button down until the computer is turned off manually, then I rebooted in safe mode - I run Vista - and ran some virus and malware programs until I found the beast and it crashed. You can also run a scan MS online at onecare.live.com, which was updated earlier this week. Moreover, I had not any data loss or permanent damage.

• How to get and set the length and the width of the content of the layer?

  How to get and set the length and the width of the content of the layer

  All layers are packed not equal. a layer as adjustment have no limits. Layer to smart object can have two different sizes. The size of the object and the size of the object may be transformed. All smart object layers have an associated transform. To transform a smart object layers you need to work with the size of the object the generated pixels fot the layer. Text layer can be resized with a transform or by changing the font size. Pixelated layers are resize via a transformation.  The script method is resize.  When you resize the number of pixelsits made by interpolation. You can specify what method to use or set Photoshop interpolation preferably by default.

  There is also a bug in Photoshop scripts if you pause the story said make a selection and use resize. Photoshop will properly support up to a State before where you suspended history. This bug seems to be in all versions of Photoshop.

  If you look ate the script in my bug report, you should get a good idea of how to resize a layer.

  Photoshop: Bug Script resize the rear paper folded to a history State