How to change device Vcenter 5.1 to 5.5?

Similar Questions

• How to change provider vcenter url?

  When you access vCenters by the Director, we have an incorrect url for vCenter.

  I could change the url to manual setting, but where in fact these 'vSphere Services to provide this URL' settings are located?

  Thanks for the tip!

  I could change finally correct URL, but it has not been simple enough.

  vCenter SSO database was wrong URL for vCenter and I couldn't find any where the SSO configuration.

  Finally I had to open the vCenter with JXplorer SSO database and delete incorrect URL of ServiceRegistrations.

  I used this KB as a guideline: VMware KB: backup and restore of the configuration of VMware vCenter Single Sign-On 5.5

• How to change the device profile.

  Hi all

  How to change the device profile. I mean from "Normal" to "Enough" or part of the profile.

  Can someone help me in this?

  -Shekhar.

  It is not possible by programming

• How to change one of my devices registered in orden to add another?

  How to change one of my devices registered in orden to add another?

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 clouds can help

  -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  -or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• vSphere SSL for the Web Client (device vCenter) certificate error

  Hello

  I installed ESXi 5.5 and right once I deployed the device vCenter. After the configuration and a few reboots, I navigates to the web client, and I get this error when I try to logon:

  "Based on the current configuration, the authentication server's SSL certificate was not reliable."

  I have until this google everything on the subject and outside tutorials on how to change certificates in the Windows version of vCenter, nothing on the device of vCenter. I was happy when I found the 'Certificate regeneration enabled' checkbox, but that did not help either. I can test successfully SSO settings in the control panel of vCenter.

  Everyone please?

  
  

  Edit: I should also mention that I am not able to connect to vCenter with the vSphere client. I get the "Cannot complete the connection by incorrect username or password". I use [email protected] as user name.

  Have you tried that? VMware KB: Troubleshooting the vCenter Server Appliance with Single Sign-On login

• How to change default browser from Yahoo to Google on Android?

  I wonder how to change the default browser on Firefox from Yahoo to Google. I personally prefer Google for research and who want by default if it is possible

  Hi devinat1, if the battery-dot-3 icon does not appear, it means that Firefox has detected a button menu 'material' on your device. In general it's near the home button below the screen. If you can't find a menu button down there, do you want to talk about device you have? Perhaps one of the volunteer support can figure out what is happening.

• I recently bought an iPhone 6s I have loaded with my iTunes support information (old phone an iPhone 5). Problem is that I now have a replica on both phones I have an Apple ID - how to change the apple on the new ID

  I recently bought an iPhone 6s I have loaded with my iTunes support information (old phone an iPhone 5). Problem is that I now have a replica on both phones I have an Apple ID - how to change the apple on the new ID

  What do you mean by 'repetition '?

  You use two phones? Or did you give the old phone to someone else? If you use two phones, one ID on both Apple is probably than most people. Before you give or sell an iOS device, you must sign in iCloud in settings > iCloud and restore the device as good as new.

• We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple ID

  We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple - ID we buy apps and music coming from the same account. It all works very well, but we don t like any other device to RING eveytime a phone rings.

  Thank you so much: D

  ON both phones, check the settings > phone > call on other devices > Off.

• Satellite A200 - 23 X: how to change the app assigned to buttons on the touchpad

  Dear friends,
  I have the Toshiba A200 23 X with Vista.
  I installed the Synaptics pointing for the touchpad device. I assigned in the 3 buttons, 3 different possibilities for that when I touch each of these buttons to start the appropriate application.

  The question is how to change the applications that I assigned?

  The first time, before fix, when I touch for example, the first button, a small window appears asking to attach a request, the same happened with the rest buttons 2.
  But now I want to change these apps that I have attached to these buttons, I know no way th.

  If anyone can help please.

  Thank you very much

  Hello

  I think you can change the settings of touchpad button in the properties of the touchpad.
  You can find properties of * Panel-> mouse-> device (last tab)-> settings button settings *.

  There are a few options. You must choose the option called Dual mode
  You will find the area where new applications could be affected.

  Concerning

• How to change the boot on Satellite 5200 sequence

  Hey, I've got laptop - Satellite 5200 901 and I would like to reinstall OS but I don't know how to operate the cd boot, always laptop run the operating system from the HARD drive.
  I would like to change boot on a CD and I don't know how to change it.
  I tried the keys F1 to F12 and I can't start the configuration of the BIOS.

  Please help me with this.

  Please try pressing the C button at the beginning upward. It will require your laptop to use CD/DVD-ROM as first boot device.

  Are you using the original recovery CD for the installation of the OS?

• How will I know if my Airport Extreme has the latest firmware?  And (not related) how to change the password used to connect to my network?

  I think I bought the latest version of Airport Extreme.  It is the unit which is rectangular, is about 6 to 7 w., etc.  I have some basic questions that I do not understand:

  1. How will I know if I have the latest firmware for this device?  I read a few posts that make it sound as if it was just automatically updates.  Is this true?

  2. can someone tell me how to change the password used to connect to my wireless network?

  Thank you very much!

  Chris

  If a firmware update is available, AirPort Extreme flashes orange.

  The most up-to-date version of the firmware is 7.7.3.

  You can see what version you currently have the following on your Mac...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Extreme

  Look for the Version

  If the new firmware was available, you will see a button update here

  To change the wireless network password...

  Click on edit in the window smaller than you watched just to check the firmware version

  Click on the Wireless tab at the top of the next window

  Go back / change the wireless password and enter a new password

  Do the same thing to check

  Click Update at the bottom right of the window and give the airport a minute full for restart

• Yoga Tablet 2-1050 - how to change the fonts

  Hello

  Just bought my compressed Yoga 2-1050 and really like it. Updated to Android 5.0, and everything works great.

  A question, however: does anyone know how to change the font (not font size) on my device not rooted?

  Thank you!

  You can't change the fonts by default on an android device, except if the option has been enabled by the devs - in which case, it will be somewhere in the menu "settings".

  However, there are two workarounds:

  1. install another Launcher to game Google store. Different allow different settings such as the layouts of different menu, different fonts, Widgets, etc.

  2. the only other option is to root your device that belongs entirely to the user & one I wouldn't recommend it unless you know what you are doing and accept the fact that it is very easy to brick your device.
  You'll also voiding the warranty (dependent on country) Although some manufacturers are pretty lax on this and can do a RMA number.

  This is pretty much your only options in its current version.

• How to change the .h to correctly practice the .dll

  Hello world

  I have a problem with a .h file to control my cnc-planet engine.

  I don't know how to edit.

  For example, I have the following function not recognized by Labview:

  extern "C" CNC_ERROR CALLCONV Connect();

  I tried with: int Connect(); Int32 Connect(); int CNC_ERROR Connect() and int32 CNC_ERROR Connect() with no result.

  Perhaps, it's the statement variable...

  It is written as follows:

  enum CNC_ERROR: int
  {
  CNC_SUCCESS = 0 X 00000000.
  CNC_ERROR_FAIL = 0 X 00000001,
  CNC_ERROR_NOT_IMPLEMENTED = 0 X 00000002,
  CNC_ERROR_NOT_INITIALIZED = 0 X 00000003,
  CNC_ERROR_DEVICE_NOT_FOUND = 0 X 00000004,
  CNC_ERROR_DEVICE_NOT_READY = 0 X 00000005,
  CNC_ERROR_DEVICE_NOT_CONNECTED = 0 X 00000006,
  CNC_ERROR_SEND_FAILED = 0 X 00000007,
  CNC_ERROR_LICENSE = 0 X 00000008,
  CNC_ERROR_RAWDATA = 0 X 00000009,
  CNC_ERROR_DEVICE_PARAMS = 0X0000000A,
  };

  I don't know how to change in a way that undrestand Labview...

  Any help?

  Thank you very much.

  PS: The integral .h file

  #pragma once

  #ifndef __AFXWIN_H__
  #error include 'stdafx.h' before including this file for PCH
  #endif

  enum CNC_ERROR: int
  {
  CNC_SUCCESS = 0 X 00000000.
  CNC_ERROR_FAIL = 0 X 00000001,
  CNC_ERROR_NOT_IMPLEMENTED = 0 X 00000002,
  CNC_ERROR_NOT_INITIALIZED = 0 X 00000003,
  CNC_ERROR_DEVICE_NOT_FOUND = 0 X 00000004,
  CNC_ERROR_DEVICE_NOT_READY = 0 X 00000005,
  CNC_ERROR_DEVICE_NOT_CONNECTED = 0 X 00000006,
  CNC_ERROR_SEND_FAILED = 0 X 00000007,
  CNC_ERROR_LICENSE = 0 X 00000008,
  CNC_ERROR_RAWDATA = 0 X 00000009,
  CNC_ERROR_DEVICE_PARAMS = 0X0000000A,
  };

  enum CNC_STATUS: int
  {
  CNC_STATUS_NONE = 0 X 00010000,
  CNC_STATUS_CONNECTED = 0 X 00010001,
  CNC_STATUS_DISCONNECTED = 0 X 00010002,
  CNC_STATUS_UNPLUGED = 0 X 00010003,
  CNC_STATUS_DATAERROR = 0 X 00010004,
  };

  enum CNC_CODE: unsigned char
  {
  CNC_CODE_Unknown = 0,
  CNC_CODE_OK = 1,
  CNC_CODE_Pos = 2,
  CNC_CODE_Stop = 3,
  CNC_CODE_Error = 8,
  };

  enum CNC_PLANE: unsigned char
  {
  CNC_PLANE_Unknown = 0,
  CNC_PLANE_XY = 1,
  CNC_PLANE_YZ = 2,
  CNC_PLANE_ZX = 3,
  CNC_PLANE_UV = 4,
  CNC_PLANE_VW = 5,
  CNC_PLANE_UW = 6,
  };

  enum CNC_SPINDLE: unsigned char
  {
  CNC_SPINDLE_Unknown = 0,
  CNC_SPINDLE_Stopped = 1,
  CNC_SPINDLE_CW = 2,
  CNC_SPINDLE_CCW = 3,
  };

  enum CNC_COOLANT: unsigned char
  {
  CNC_COOLANT_Unknown = 0,
  CNC_COOLANT_Off = 1,
  CNC_COOLANT_On = 2,
  };

  enum CNC_VERSION: unsigned char
  {
  CNC_VERSION_Unknown = 0,
  CNC_VERSION_MK1 = 1,
  CNC_VERSION_MK2 = 2,
  };

  #define CALLCONV __stdcall

  Reminder for the UBS state changes
  empty typedef (__stdcall TStatusCallback) (State CNC_STATUS);

  Reminder of the changes in the status of the drive
  (typedef) empty (__stdcall TDataCallback)
  Code CNC_CODE, //status
  unsigned char bufferFree //amount of free buffers - don't start a new order if it is less than 4
  int numExecuting, number of running command
  keysLimit unsigned char, unsigned char keysJog, //state of the limit and jog buttons
  Put int, int posC, int POSD, int posB //position of the four axes in steps
  unsigned char output);                    Exit status of the controller (flood, mist, axis)

  extern "C" CNC_ERROR CALLCONV (BSTR * result);
  HID
  extern "C" CNC_ERROR CALLCONV HidInitialize();
  extern "C" CNC_ERROR CALLCONV HidFinalize();
  extern "C" BOOL CheckHidInitialized() CALLCONV;
  extern "C" CNC_ERROR CALLCONV GetHidDeviceList(BSTR* deviceList);
  extern "C" CNC_ERROR CALLCONV GetHidDeviceInfo(int vid, int pid, BSTR* vendorName, BSTR* productName, BSTR* serialNumber);
  extern "C" CNC_ERROR CALLCONV GetHidDeviceInfoByName(BSTR device, BSTR* vendorName, BSTR* productName, BSTR* serialNumber);

  Controller of
  extern "C" CNC_ERROR CALLCONV Connect();
  extern "C" CNC_ERROR CALLCONV Disconnect();
  extern "C" BOOL CALLCONV IsConnected();
  extern "C" CNC_ERROR CALLCONV GetDeviceInfoEx(BSTR* vendorName, BSTR* productName,)
  BOOL * crafts, int * serialNumber.
  unsigned char * ver_year, unsigned char * ver_month, unsigned char * ver_day);
  extern "C" CNC_ERROR CALLCONV GetDeviceInfo(BSTR* vendorName, BSTR* productName, BOOL* diy);
  extern "C" CNC_ERROR CALLCONV RegisterStatusCallback(TStatusCallback *statusCallback);
  extern "C" CNC_ERROR CALLCONV RegisterDataCallback(TDataCallback *dataCallback);

  extern "C" CNC_ERROR CALLCONV GetState)
  CNC_CODE * code,.
  char * bufferFree,.
  int * numExecuting,.
  char * keysLimit, char * keysJog,
  int * posA, int * posB, int * posC, int * POSD.
  char * output);
  extern "C" CNC_ERROR CALLCONV SetDeviceParams)
  int axis1StepsPerMM, int axis2StepsPerMM, int axis3StepsPerMM, int axis4StepsPerMM,
  unsigned char axisLimitSwitch,
  Double axis1Backlash, double axis2Backlash, double axis3Backlash, double axis4Backlash.
  Double axis1Accel, double axis2Accel, double axis3Accel, double axis4Accel.
  (double axis1InitSpeed, double axis2InitSpeed, double axis3InitSpeed, double axis4InitSpeed);

  extern "C" CNC_ERROR CALLCONV CmdInfo(int* num);
  extern "C" CNC_ERROR CALLCONV CmdWrite(int* num);
  extern "C" CNC_ERROR CALLCONV CmdMoveAxes(int* num, double posA, double posB, double posC, double posD, double speed, BOOL startAccel, BOOL endAccel);
  extern "C" CNC_ERROR CALLCONV CmdMoveAxesDelta(int* num, double posDeltaA, double posDeltaB, double posDeltaC, double posDeltaD, double speed, BOOL startAccel, BOOL endAccel);
  extern "C" CNC_ERROR CALLCONV CmdPos(int* num, double posA, double posB, double posC, double posD);
  extern "C" CNC_ERROR CALLCONV CmdDwell(int* num, double seconds);
  extern "C" CNC_ERROR CALLCONV CmdEStop(int* num);
  extern "C" CNC_ERROR CALLCONV CmdStop(int* num);
  extern "C" CNC_ERROR CALLCONV CmdPause(int* num);
  extern "C" CNC_ERROR CALLCONV CmdPauseNow(int* num);
  extern "C" CNC_ERROR CALLCONV CmdResume(int* num);
  extern "C" CNC_ERROR CALLCONV CmdResumeNow(int* num);
  extern "C" CNC_ERROR CALLCONV CmdOut(int* num, unsigned char output);
  extern "C" CNC_ERROR CALLCONV CmdOutNow(int* num, unsigned char output);
  extern "C" CNC_ERROR CALLCONV CmdSpindle(int* num, CNC_SPINDLE direction, double speed);
  extern "C" CNC_ERROR CALLCONV CmdSpindleNow(int* num, CNC_SPINDLE direction, double speed);
  extern "C" CNC_ERROR CALLCONV CmdCoolant(int* num, CNC_COOLANT flood, CNC_COOLANT mist);
  extern "C" CNC_ERROR CALLCONV CmdCoolantNow(int* num, CNC_COOLANT flood, CNC_COOLANT mist);
  extern "C" CNC_ERROR CALLCONV CmdNothing(int* num);

  Hello

  Rather than edit the .h file, it is easier to use the dll call function to define exactly what are the arguments, and return the function.

  Thanks for your replies.

  M.

• HP photosmart 5520: how to change wireless network

  We change the network wireless to a new device

  How can I change the HP Photosmart 5520 for the new wireless device?

  How to configure laptop computers to print to the printer on the new wireless network?

  annax wrote:

  I looked through the user's guides, but could not find how to change printer to join another network wireless

  Can you please provide the steps

  I downloaded the manual and found your informtion on page 32 user's guide.

  http://support.HP.com/us-en/product/HP-Photosmart-5520-e-all-in-one-printer-series/5157533/model/5157535/manuals

  It's your support on the edit page and the connection of your printer.

• How to change the size of icons and windows

  original title: oversized windows and icons

  im stuck in something I don't know how to change, all my windows and icons are so big they tend to adapt to the screen and I know its something simple to fix but I can not find it ive tried all the display options and disabilities can't just can someone help me please

  Hello

   

  ·         Were there recent changes made on the computer before the show?

   

  Follow these steps and check if that helps:

   

  Step 1:

   

  (a) click on the tab "Start" then go to control panel. In the upper left corner, click 'Switch to Classic view'-, it will take only a few seconds until Windows in Classic view. In Classic view, you will see all of the icons that are currently on your desktop.

  (b) go to 'View' and the display properties box opens. On the appearance tab, press the 'Effects', uncheck 'Use large icons'. Press the OK button, and then click OK again in the display properties box. The icons will appear normal on your desktop.

   

   

  Step 2:

  (a) right click on your mouse and scroll down to "Properties". The display properties box will be pop up, so go to the appearance tab then click the "Advanced" button and look for "Item.

  (b) scroll to the bottom of the box and select "icon". Go to the 'size' change the default size, 32, for your icon. Press the button 'Apply' then 'OK '.

   

  See also:

   

  How to change the appearance of items on the desktop in Windows XP

  http://support.Microsoft.com/kb/310543

  Step 3:

  If the problem persists, update the latest graphics card drivers on the manufacturer's Web site and check if it helps.

  How to manage devices in Windows XP