Memory Slot B doesn't work my Satellite L

I bought a module memory replacement, which is compatible, but it does not work. I moved the original module to the location b to test the slot machine. When I start the laptop it is said to move the memory module to slot A.

Why it does not start with the module into the connector B?

Either the slot B defective or I can configure it to accept a memory module?

Thanks in advance.

Hello

Can you please tell us which laptop model you have and which module of RAM you bought?
You understand that, on this virtual path, it is not easy to tell a lot about your question.
Fact is that the upgrade modules must be compatible with the hardware platform of your laptop.

This forum is filled with different but similar reports where people have these problems.
Above all, the problem was Aries himself. Looking for a cheap people buy certain products without name and not the quality products. The Modules of RAM 'Value' use many chips cheap using several banks/channels, which can cause problems of compatibility with some Chipsets/CPUS.

Tags: Toshiba

Similar Questions

  • LAN and WLan doesn't work on Satellite L40 - 18W

    Hi all

    I have TOSHIBA Satellite L40 - 18W and my 1 - wireless problem not knitting & wired lan does not work.
    I download driver and everything is ok, but it doesn't work (when I search by wireless I can't find any network.) My router works fine)

    Please help me

    Hello

    It is difficult to understand what you mean by not working do not.
    Does that mean exactly?
    You are not able to connect to the internet or what?

    Usually, if the wireless network card and LAN card have been properly recognized in Device Manager, then the drivers are working properly and the problem could be related to the router configuration bad or maybe some active firewall, etc.

    First I recommend that you check the router settings. Check if the router has been configured with the right data from ISP and if all other options have been properly set.

    The laptop supports the Realtek Wlan and LAN card.
    Check if the wireless card uses the same standard WLan as the WLan router and if the right encryption has been used too.

  • FN key doesn't work on Satellite Pro L450

    Hello everyone...

    2 months that I formatted windows 7 Home premium (cumming with laptop) and install ultimate
    session that I can't use the buttons Fn I'm trying to download Toshiba Tvab of hear

    http://cdgenp01.CSD.Toshiba.com/content/support/downloads/util_tvap_TC00214700F.exe

    and the most recent version of use of cant steel but I Fn key problem troubled me a lot
    the other work of good driver but I cannot switch adapter wireless or exception from the bios

    I want to restore all the software on Toshiba as factory session I was searched a lot but I don't have a solution.

    Thank you...

    If you have the American model than using this page, but if you model laptop EMEA please use http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp drivers

    Can you please exact model laptop?

  • Program to save energy doesn't work on Satellite A100

    SOmethings weird? A100 Satellite Xp... All updates automatically configured, new battery; now I get caption on start up: -.
    >
    It must relate to the battery Toshiba program. How can I get rid of this or fix the problem?

    Richy

    Have you tried to remove and reinstall Toshiba power saver?

  • Satellite Pro L300 - second defective memory Slot?

    Hi, I'm trying to install 4 GB of memory in a laptop Satellite Pro L300. This kind of thing, I did a thousand times before.

    However, every time I install a module of memory in the second memory slot, the laptop will be a blue screen when windows is loaded. Even running memtest (via bootable cd) will result in a block, so it is not for lack of Windows.

    I have the latest version of the BIOS installed (1.50)

    Each module of memory works perfectly in the main location on its own.

    With the help of a single module of memory in the memory secondary slot (even the original 1 GB module) translates the laptop does not even start.

    Is this a known issue? Or is it just a second faulty slot?

    Thank you very much!

    Maybe it's a non compatible memory module.

    What model of laptop you have exactly (L300-xxx)?
    What extra RAM you bought?
    Have you checked the compatibility?

    To be honest on this forum you will find many forums where people have described the same problem after upgrade. Most of these problems described was linked to the use of markets and not compatible good RAM modules.

  • Satellite L300-171 - defective memory slot

    Hello, Toshiba users!

    I am the proud owner of a laptop Toshiba Satellite L300-171, purchased last year.
    one of my memory locations stoped work 4 weeks ago.

    This model comes with 3 GB of DDR2 667 MHz RAM. Now it shows me only 2 GB.
    I swapped the modules between them (I thought that maybe the 1 GB module not working not) and I have 1 GB of memory. Thus, the two RAM modules work. It's the slot.

    You know any reason why this could happen during the night? (perhaps a CMOS setting or something).

    And is it true that memory slot can access 2 GB of memory?

    To see the specifications of this model to access to this
    http://EU.computers.Toshiba-Europe.com/innovation/product/satellite-L300-171/1056296/model/1056296/serie/150081/family/2326/x/50/y/14/type/2319/action/SHOW_ATTRIBUTES/#0

    I have the same operating system as it came with: Windows Vista Home Premium 32-bit

    Thank you very much for any answer

    > Do you know of any reason why this could happen during the night? (perhaps a CMOS setting or something).
    Each issue goes unexpectedly

    I have an old... my laptop is about 8 years old... The RAM slot died after 5 years of use I think the higher internal temperature might be one of the reasons why this slot could damage

    In my case, the laptop crashed. I removed a faulty slot RAM module and everything worked properly.
    The old RAM modules were 512 MB now I ve got a 1 GB of RAM in a housing and the second is empty

  • Satellite 3000 - x 4: this model has how many memory slots?

    Hello

    I have a question on this model of Toshiba Satellite 3000 - x 4 PS301E - 000 K 8 - EN I took the chassis on this model today to do a repair for someone in my family work. When I took the VGA card, I discovered what looked like an another memory location.
    So my question is how many slots memory model there?

    I read online and I checked the profile page and they all point to this model with two memory locations.
    If this is the case then what is this thing that resembled a memory slot under the vga card?
    I had to buy another piece of RAM for this model today make three, but I decided on a little hand to check it out first.

    There are already two sticks of laptop memory already, 512 MB, and 128 MB. This model can take up to 1 GB.
    So, what do you think is there memory locations two or three on this model?

    Thank you

    Hello

    As far as I know, this unit has 2 memory slots and 1 slot for PC card for 2 Type II cards or 1 Type III card.
    Please also see this Toshiba product site:
    HTTP://UK.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/SELECTED_PRODUCT_OPTION.JSP?SERVICE=UK&ACTION=PRIN T_WITH_BACK & PRODUCT_ID = 15932 & DISC_MODEL = 0

  • Touchscreen doesn't work is not for the Satellite U920t - 10 p

    Please read this completely before you answer with your copied and pasted answers.

    My touch screen lets you stop work, but was still attached with a reboot of the machine.
    Now it doesn't work at all and * I've tried everything posted elsewhere in this forum *.

    I tried to change the settings for battery power, try to update the drivers (not exactly who is right though!).

    Please can anyone help because it is a new machine and it's very frustrating.

    Serial number: 7D054633H
    Model: Toshiba Satellite U920t - PSUL1E-01900JEN 10 p

    Thanks in advance.

    > Please read this completely before you answer with your copied and pasted answers.
    IMHO, I n t think that someone here in the forum doesn t read the messages before playback
    I hope that this part of your post is just the result of frustration due to the malfunction of the notebook...

    Back to your question:
    > I tried everything already posted elsewhere in this forum.
    and what does this mean? What have you tried exactly?
    Have you given zero and plant control panel?

    If not try and in the case where this help not the laptop's hardware could be affected which requires new checks of material by an authorized

  • Satellite P10, internal keyboard: the key of the pipe doesn't work anymore

    Hello everyone!

    I have a Satellite P10 with WinXP (SP1) for about 1 year.
    Symptoms: it's the internal keyboard. I used the key pipe <|>indeed, not every day, but it worked. And suddenly, I see that it does no more: it is 'dead', while all other keys work correctly...

    My next steps:
    (1) I uninstalled the driver of standard keyboard (101/102 keys) or Microsoft Natural Keyboard (PS/2) keyboard, and were found after Windows starts. There is no material conflict under the Device Manager or the information system, the driver runs correctly...

    (2) the keyboard layout is German. But I have already tested the English (United States) too: the result is the same.

    Questions:
    (1) is the key physically damaged?
    (2) otherwise, what I can do to solve the problem? Where can I get a newer driver perhaps?

    Thanks in advance!

    Post edited by: MischaG

    Hello

    As far as I know that it is not necessary to install a driver for keyboard. The driver is built into the OS. If the button is dead and doesn't work at all, it is probably defective.

    Good bye

  • Memory slot secondary satellite P30 145 unrecognized

    After a HARD recent failure disk format, I had to reinstall XP and downloaded the drivers Tosh not having does not have access to my original restore disk as I work abroad.

    The secondary memory slot is grateful now not any DDR, I'm moving to 2 G, any suggestions?

    Kind regards
    Eamonn

    Hello

    The second slot recognized different memory modules?
    You could definitely upgrade the memory on this laptop up to 2 GB!
    If a single location must be able to recognize a 1024MB module.

    I suggest you first check the compatibility with the module because there might be a malfunction of the motherboard (slot), or you try to use the module is not compatible.
    You have to eliminate a!

    To my knowledge, this laptop supports PC2700 DDR - RAM and 1024MB (PA3313U-1M1G) module should work!

  • The M70-267 Satellite internal memory card reader does not work

    Hello

    Internal memory card reader no longer works on my M70-267.
    Device Manager reports the error with the driver of the bus PCI 6 mass storage controller, device 4, function 3.
    The first problem, the result of this is?

    Help, please
    thanx

    Hello

    Yes, this mass storage controller could be the card reader. So, you can try to reinstall the drivers, which can be downloaded here:

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    or you can remove it from the Device Manager and restart your machine

    or, if that didn't help then you should send your machine to a service partner chartered for an assessment of health/repair of equipment.

    To find the closest, you can check out this site:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

    Good luck
    See you soon

  • Satellite P300 (PSPCCA) - fingerprint reader doesn't work with IE8

    Fingerprint reader worked very well for all websites accessible Internet Explorer 7 vi.
    Then upgraded to IE8, fingerprint software has stopped working in IE. Uninstalled the old software of fingerprint and a downloaded from the toshiba site - updated version still does not.

    Does anyone have a similar experience?

    Hello

    As far as I know the old fingerprint software doesn't work with IE8 and Firefox 3
    You will have to wait for the update.
    I m not very well what version it will be, but I think soemthing with 3.0 or higher

  • I can't update itunes. then my iphone doesn´t work on this computer.

    I have an iMac 9.1 10.5.8, 2.66 GHz processor and 2 GB of memory. He already has snow leopard, but I can't update to other software and I can not update itunes. then my iphone doesn´t work on this computer. What is the latest software that it supports and what are the steps to update the software and itunes?

    < re-titled by host >

    This machine can run the latest version of Mac OS X (10.11). You cannot update directly from 10.5, however. If you have already upgraded to Snow Leopard and have used the software update to get updated (10.6.8), then you should be able to install El Capitan from the Mac App store if you have enough disk space.

    It would be wise to upgrade the RAM of your machine before attempting it, however, that 2 GB is barely enough to run the OS, never mind all the applications.

    This machine can be maxed out at 8 GB of RAM.

  • A WI - FI connection does not work on Satellite C50-A-179

    Hi all!

    I am owner of laptop Toshiba Satellite A-C50-179 (PSCGAE) with Windows 8, and recently I tried to install Connectify on it.

    However, Microsoft Virtual WiFi Miniport Adapter was missing on the laptop and given this Connectify couldn't work. I tried to activate/install somehow using advice found on the internet. The suggestion was to reinstall the driver for the wireless adapter.

    I uninstalled the driver original and reinstalled again after you download from Toshiba Web site ([here | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 7934 & selSh ortMod = 3969 & language = 13 & selOS = 40 & selType = 97 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 97 & page = 1 & ID = 86778 & DISO = 40 & driverLanguage = 42])

    I'm sure that I downloaded and installed the right driver for the right card that is "Qualcomm Atheros AR956x Wireless Network Adapter". I made prior to installation to verify all the information on the adapter and the driver.

    However, after the relocation wifi stopped working completely:

    -l' icon/network adapter wireless connection 'Control of the network connections and Internet\Network' is there but it does not behave as it should, it looks like a generic and not specific to a network connection icon - basically, it does not represent the actual adapter and got the name of it in the note;

    WiFi - option in Windows 8 settings menu-changes PC network settings has completely disappeared (bluetooth option is still there and so is the flight mode option);

    -wifi can be turned on by pressing on activate in the menu of RIGH click that generic network connection I mentioned, but it will not pick up any signal and will find all the same connections so it is certainly.

    There is no yellow exclamation point in Device Manager list and the wireless adapter is thus, to act and to pretend as if everything is fine and working properly.

    I tried troubleshooting, installing the driver using Windows Update, the installation and update of its properties menu driver in Device Manager and all kinds of things like that, but none of this has helped and wifi still doesn't work.

    Basically, the laptop seems to think that the adapter is not working properly and everything is fine HW and SW wise, but in reality it is not. I don't really know what I should try, I don't want to reinstall the entire operating system, because I'm afraid (or I) would mess everything up even more (wasting yet more pilots).

    I'm running on a cable internet connection now, and I'm happy it's working (I really need the laptop for work and I can't afford to lose for a day, not to mention some more)

    Could someone help me please?
    Any ideas how to solve this problem and make the wifi working again?
    I will be really grateful for any advice.

    Thank you, Miko31.

    Problem is that Toshiba does not support the third party software and if the problem occurred after installing Connectify you should contact support and ask for help. I mean they know how their software works and perhaps a workaround solution that can help you.

    This software is not known to me, but I can imagine there are now a few conflicts. What should do? It is not easy to say. Try to remove the preinstalled software and clean the registry entries.

    In the worst case, you must reinstall OS and reuse for laptop with factory settings.

  • SD card reader does not work on Satellite C850-1CN after installed Win 8.1

    Hello

    Since I installed Windows 8.1 on my computer Satellite C850 - 1CN Ref.: PSKCAE my SD port doesn't work
    I would like to know if there is a driver I need to download because I searched the site for a port driver but in vain...

    Sorry for my English, I speak French and I hope I'm in the right forum

    Hello

    You must download and install the controller card reader for Win 8.1 driver system

    This driver must be right:
    [Windows 6.1.8400.30136 v 8.1 - 64 Bit card reader controller | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 7499 selSh ortMod = 3417 & language = 13 & selOS = all & selType = 316 & upload year = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = 316 & page = 1 & ID = 88526 & OS ID = 46 & driverLanguage = 42]

Maybe you are looking for

  • Update of Windows Vista Home Premium - code 80070490 error:

    Computer - Satellite 200Operating system - Vista Home Premium (service pack 1)Problem - when I try to update Windows Update (manual and automatic) I get the error code 80070490I tried - system restore, download and pay for 'RegCure' and following the

  • How to scan a document to word with HPOfficejet 6480 I change TXT

    I use a HP Officejet 6480 and analyze in a document in word, so I can add and change the text. When I check the help button it tells me to save in a TXT file. When I go to start this process it doesn't give me that option. How should I proceed with t

  • Need help to extract a CAB Secure Digital file in the Windows XP computer.

    Original title: can someone help me extract a CAB Secure Digital file. Hello administrators of Microsoft development network Please help me! check out a file .sdc. I want to download this file http://FTP.sh.cvut.cz/MSDNAA/Rapid_Setup/en_winxp_pro_wit

  • What is win32/regcure

    I have win32/RegCure and why Ms. scan only removes it partially. can I get rid of it all together if yes how. It poses a real threat to my safety. Why is it not detected by norton 360. I am running xp pro SP3.

  • RE: .vhd files Can I get some files on an external hard drive

    reinstalled wintows professional vista on my computer from floppy of origin hard drive wiping clean. Backup computer disk external hrd and now I would like to recover some of the old files. Is this possible?