How to change the DD in a Satellite CL10-B-100

Hello! One night I closed my laptop down normally. The next morning, it wouldn't start, boot disc error.
So I started on a Win 8 DVD to fix it, but he didn't see C:

I think that SD is out (I think this is a record of MEM) if I tried to open it to change the DD or test it on another computer.
I could disassemble the back but I don't see the DD. So I guess it's just behind the keyboard.
But I don't know how I can get to him.

I tried a manual but I can't find.

Can you explain to me how I can change the DD?

Thank you very much!

Hello, a little for my question. I want to change the disk because the computer does not start: introduce a system startup disk... But where's the record?
Help, please!

Thank you very much!

Tags: Toshiba

Similar Questions

  • How to change the infrared port on Satellite M30 to be IrDA to be direct IR?

    Hello world

    I just bought a new watch that should be able to communicate with a pc via the infrared port (it's the Polar S710).
    Unfortunately, it does not work as the 'Protocol' of the watch is directIR, rather than be IrDA, as is my cell phone.

    I saw somewhere that it would be possible to change the infrared port of my laptop in order to operate in directIR. Anyone know the procedure? I think I could change something directly in the driver, but I did not how to deal with.

    I would be very grateful if someone could help me.

    Thank you
    SEB

    Hello

    I think that it of not possible to change the IrDA Protocol on the laptop.
    But have you tried to update the software polar?
    Consult the manufacturing site:
    http://support.polar.fi/PKBSupport.nsf/library?OpenForm

    If this does not help I think that only and an external solution as USB-> DirectIR dongle help

  • How to change the motherboard on my Satellite L655D password?

    I need to change the password on my laptop Toshiba Satellite L655d motherboard, but I don't know where I can.
    I'll be very grateful if someone can help me.

    Concerning

    Full Saravia

    Password motherboard, you mean the BIOS password. Right?

    First of all, he must know the old password you?
    If you do not know the old password to the BIOS, you will not be able to remove this
    In this case, you will need to contact the ASP from Toshiba (service) in your country.
    The technician would be able to remove an unknown password.

  • How to change the module RAM in Satellite Pro A100 (PSAACE)?

    Hey,.

    I just bought a RAM module to fit in my currently empty home of RAM, but I never installed any portable computer memort before that. I checked a few guides, but none seem to show the kind of clips that have the Pro A100.

    Could someone help me please by pointing me in the direction of a specific guide or taking their time to explain the process.

    Thank you in advance.
    Jason

    On the side at the bottom in the middle is placed the memory cover. Remove it and you'll see two memory slots there. I assume that your device comes with the memory module and new you must put in the empty socket and just press it. Two metal brackets will fix it in the right position.

    That's all you need to do. By the way: before you start doing anything, I recommend you disconnect AC power and also to remove battery.

  • Satellite A100-727: how to change the config of media buttons?

    I have a Toshiba laptop Satellite A100 727 and it was these media buttons Nice on the left side of the key board.

    They are great, but I have no idea how to change the keys.
    I had put them to launch internet and exploited with mediaplayer, but after that I had to do reinstal windows, my harddisck crashed, functions on the buttons has changed, they start up the InterVideo WinDvd.

    Does one know how I can change the functions of the buttons?
    I read something about the tools of Toshiba, but I can't find them anywere.

    TYVM in advance

    Hello

    Using TOSHIBA button controls, you can set the key features. If you have it installed you can find the TOSHIBA controls icon in the Panel.
    You can also find if you open TOSHIBA help > Optimize.

  • Satellite U400 - 15G - overheating-how to change the cooling module?

    Hello

    My Satellite U400 15 G is overheating (CPU up to 70 ° c). NEITER in Google nor in the manual, I can find a statement, how to open and change the cooling module. (I'm only trying to change mine, because garranty is already gone)

    Does anyone know how to open the laptop/notebook and how to change the cooling module?

    Thanks in advance

    Post edited by: bla42

    Before you continue just a matter of discussion:
    Let's say I help you with this and damage you something or broke a plastic part, what you will do in this case?
    I mean you probably know that you can get a few small important parts as separate components.

    By the way: this description may be provided in the manual. Disassembly of the laptop is authorized personal only. When you buy a new car it is no description how to disassemble the entire engine, right?

    By the way: Jeanine's right. See this page. There are many useful tips on laptop disassembly procedure.

  • Satellite A500 - how to change the LED display?

    Hey.

    Does anyone have guide how to change the display LED of Toshiba Satellite a500?
    I tried irisvista.com but there is only a guide how to replace an optical drive in this model, but nothing on the screen.

    Thank you.

    Don t always start a new thread on the same topic.
    Please follow the firstto:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=53875

  • Satellite P10 - how to change the HARD drive?

    Hello

    I want to change my Satellite P10 for a bigger HARD drive.
    But I Don t know how to remove the DvD drive.

    On this laptop, I mean that the HARD drive is under the DvD drive.

    Please help me, if you know how to change the HARD drive.

    Welcome them

    Mister_X

    Hi Frank,.

    I'm not too sure about the P10, but on my A30 the hadr drive is under the DVD-ROM. It is secured in place by a single screw (accessible from under the laptop), and when it is deleted the DVD-ROM slides just to place revealing the hard drive.

    The hard drive is fixed with 4 screws (2 on each side)

    HTH

  • Satellite Pro C660-167: someone knows how to change the sensitivity of the keyboard?

    Anyone know how to change the sensitivity of the keyboard? Having real problems when entering laptop missing letters. !
    Very annoying!

    Hello

    I think that this problem could be solved by the BIOS updated.
    Please take a look on Toshiba European driver page and download the latest version of the BIOS.

    I read here in the forum to the similar topic with another series of notebook and the BIOS update does work.

    Good luck

  • How to change the color of Satellite Pro P300 settings

    I just received my new laptop computer and cannot for the life of me find how to change the color settings in the monitor.
    My old desk there was a button on the monitor.

    In a first time laptop user im nuts will try to find how to change my monitor settings...

    If anyone can help id be so grateful

    Please don t mix the portable computers internal monitor with external PC monitor.
    You won't find any control unit and on the external monitor that would help you to change the color.

    I put t know what your laptop smart chart uses but my laptop supports Intel graphics card and pre-installed (in Control Panel) Intel Graphics Media Accelerator provides a few color correction settings.
    The parameters are; color, gamma, brightness and contrast

    Here, you can set values between 0 and 100

    Maybe it's what you're looking for

  • Satellite A200 - 23 X: how to change the app assigned to buttons on the touchpad

    Dear friends,
    I have the Toshiba A200 23 X with Vista.
    I installed the Synaptics pointing for the touchpad device. I assigned in the 3 buttons, 3 different possibilities for that when I touch each of these buttons to start the appropriate application.

    The question is how to change the applications that I assigned?

    The first time, before fix, when I touch for example, the first button, a small window appears asking to attach a request, the same happened with the rest buttons 2.
    But now I want to change these apps that I have attached to these buttons, I know no way th.

    If anyone can help please.

    Thank you very much

    Hello

    I think you can change the settings of touchpad button in the properties of the touchpad.
    You can find properties of * Panel-> mouse-> device (last tab)-> settings button settings *.

    There are a few options. You must choose the option called Dual mode
    You will find the area where new applications could be affected.

    Concerning

  • Satellite A210-109: how to change the color temperature of the display?

    I want to know how to change the color temperature of the screen of my laptop? Theres no option in the ATI catalyst and no toshiba utility, where I can change this? I have the latest installed toshiba display drivers.

    Hello

    you mean the gamma settings? I don't know if the ati drivers are able to do, but you can try the program "powerstrip" (www.download.com/PowerStrip/3000-2086_4-10395724.html), which can change the color and the parameter gamma for graphics cards.

    Just give it a try and you will get your favorite color settings. :)

    Welcome them

  • How to install the driver LAN for Satellite Pro A120

    In fact, my problem is that I didn't know how to install the driver on my Satellite Pro A120 lan connect net throug.
    The issue that there's no facility to do to complete the installation.

    And theres other question that I need the Ethernet controller

    My laptop was vista operating system installed, but I change and put Windows XP

    Please help me

    Hello

    LAN installation is very easy.
    First of all, you need the correct LAN driver.
    In order to download the LAN driver please visit the Toshiba driver page and choose your model of laptop.

    Once the LAN driver has been downloaded, you will need to decompress.
    Then you will need to access the Device Manager, choose the controller Ethernet (network cards) and must point to the place where the LAN driver was decompressed.

    Then finish the installation procedure.

  • How to change the iPhone camera shutter sound 7

    How to change the iPhone camera shutter sound 7?

    Hello

    To adjust the volume of the sound of the camera shutter:

    • Use the settings ringer and alerts:
      • On iPhone 7 and iPhone 7 more, go to: settings > sounds and haptic.
      • (Other models, go to settings > sounds).
    • Or turn mute off / on using the switch on the side of your iPhone's ring/silent.
      • (The mute function is disabled in some countries).
  • How to change the number of minutes for the exercise of the activity of the application

    How to change the number of minutes for the exercise of the activity of the application

    Hello

    It is not currently possible to change the goal of daily exercise.

    If you want to suggest that Apple consider adding this option, you can submit a request here:

    https://www.Apple.com/feedback/watch.html

Maybe you are looking for

  • Mac pro 10.10 won't sleep

    All of a sudden my MP 2009 won't sleep. I reset the SMC. Energy parameters Checked. This is the Terminal report; Systemic assertion status: BackgroundTask 0 ApplePushServiceTask 0 UserIsActive 0 PreventUserIdleDisplaySleep 0 PreventSystemSleep 0 Exte

  • confusing output of "CPU Get RT Loads.vi"

    Target material: cRIO-9068 LabVIEW edition development system complete 2014 I'm intrigued by the information provided by the 'Get CPU Loads.vi RT". I wrote a simple test program that I run in interactive mode on my RT goal to demonstrate the problem.

  • error 0210: stuck key 7B

    Hello I just upgraded to the most recent updated to Microsoft Update on an IBM Thinkpad T41. A reboot is required, and now I get error 0210: Stuck Key 7B. It doesn't seem to be a stuck key. Help, please! Thank youJoanna Kaul

  • Pages not to load not in browsers

    I recently installed Firefox 4 on my computer.  After the first time that I used it, I opened it and it wouldn't load pages.  I tried to open chrome with the same result and also Internet Explorer.  I also tried to use a cable to connect to the inter

  • Highway-C and highway-E and VCS Expressway

    Hello I'm confused by these three I know that expressway-E is used with Express-C track Their function is like VCS Expressway? or am I wrong? Please help to know when to use each one? Also why use us next to the firewall? What is the average of the c