How to change the module RAM in Satellite Pro A100 (PSAACE)?

Similar Questions

• How to install the driver LAN for Satellite Pro A120

  In fact, my problem is that I didn't know how to install the driver on my Satellite Pro A120 lan connect net throug.
  The issue that there's no facility to do to complete the installation.

  And theres other question that I need the Ethernet controller

  My laptop was vista operating system installed, but I change and put Windows XP

  Please help me

  Hello

  LAN installation is very easy.
  First of all, you need the correct LAN driver.
  In order to download the LAN driver please visit the Toshiba driver page and choose your model of laptop.

  Once the LAN driver has been downloaded, you will need to decompress.
  Then you will need to access the Device Manager, choose the controller Ethernet (network cards) and must point to the place where the LAN driver was decompressed.

  Then finish the installation procedure.

• Question about upgrading RAM on Satellite Pro A100

  Hi all

  I have a Satellite Pro A100 PSAACE I want to upgrade. I currently have 1 GB of RAM in two 512 MB modules. I looked on Crucial.com and he says I need DDR2 PC2 4200 module (240 pin DIMM), but of course, they want to sell their own stuff that only comes in 1 GB modules.
  So, what is the maximum amount of RAM my computer can take? I would like to have more than 2 GB in order to make my page file smaller. Is 2 GB maximum I can put in?

  To be honest, I read several threads where people were not so happy with the RAMs from crucial. In my opinion, you should spend your laptop with 2 x 1 GB RAM. With 2 GB of RAM, your laptop will work fine and I'm sure you'll be happy with it.

  As recommendable modules, you must use either 1 GB (PA3411U-2M1G) or module recommended by Kingston.

• Satellite Pro A100 (PSAACE) CD-ROM does not

  Computer: Toshiba Satellite Pro A100 (PSAACE)
  Age: 1 year
  Operating system: Microsoft Windows XP SP2
  CD-ROM: Pioneer DVD - RW DVR-K16A

  Whenever I put a cd in the rom it makes a series of strange noises, hard to explain, but this isn't really mather.

  At the end of the day, I take the cd see nothing hapends don't never no mather how long I wait.
  No error apears but it never had to read the cd.

  I tried a long list of solutions:
  Pilot Uppdate
  Reset dma tool
  Uninstall and reinstall

  Have you tried the method with the disassembly of the upper and lower of certain registry entries filters? If this is not the case, here's the quick tutorial:

  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then start the registry (regedit) and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  Have you tried if you can boot from the CD?
  If you can, try to reinstall your Windows XP and see if problem persists.

• Satellite Pro A100 PSAACE - no DVD drive detected

  I recently bought a Toshiba Satellite Pro A100 PSAACE a friend and make home and implement market realized that the dvd drive is not detected by the laptop at all.

  The drawer opens normally, and when I close it the light flashes orange little but no detection at all!

  Help, please! Gets very frustrated by that.

  Hello

  Optical drive not recognized for the BIOS is or is not listed in Windows Explorer? CEN you report State in Device Manager?

• Upgrading RAM on Satellite Pro A100-840

  The specification for the Satellite Pro A100 840 said that memory has a maximum of 4 GB of memory. But it does not seem to be all provided by Toshiba that allows me to level to 4 GB of memory. This current has the default 1gn that was shipped when ordered. Anyone know how to get the 1 GB to 4 GB?

  Thank you in advance for any help

  Hello

  I just wanted to check the specifications of the laptop but I was not able to find the Satellite Pro A100-840. Can you please check laptop model and send us the laptop model number.

  In any case I really don't understand what your problem. It seems that your model of laptop can handle with 4 GB RAM max. According to your assignment, your laptop comes with 1 GB of RAM.

  So if you want to use the maximum RAM on your laptop satellite, you must buy RAM 2 X 2 GB module. As far as I know, 2 GB RAM module are available and if you want to be sure of compatibility please check the Kingston products.

  Please check this Kingston Memory Configurator

• Strange problem with RAM on Satellite Pro A100

  I have a Satellite Pro A100 (not sure which...)
  It came with 2x256mb RAM, which are mounted. I noticed my laptop slow, so I checked what he says on the properties of the workstation - who said RAM 192Mo...

  Any idea what's going on?
  I had a peek inside, both are mounted securely, while the right push entirely? There is a small gap (about 1 / 2mm) so that is the little nick and real editing. -What is the cause? Or it's maybe faulty?

  Please help me!
  Thanks in advance,

  Diana

  According to the description of your problem, I guess one of the memory modules is not recognized by the system and the specified result 192 MB of Ram only tell me that your laptop has shared graphics memory card.

  Satellite Pro A100 is fairly new to laptop and, in my opinion, you should contact service. The guarantee must be valid and if everything is defective it will be replaced free of charge.

  If possible, tell us what Satellite Pro, you have exactly. This info you can find on the lower side of your laptop.

• Can I replace the graphics card on Satellite Pro A100

  Hi all

  Just a quick question about the graphics card in my Satellite pro a100 computer laptop. I heard different stories about this.

  The ATI RAdeon Mobility x 1400 card can be replaced on this laptop. If so how easy it is to do and how I could tell which cards would be compatible?

  Thank you

  MAcca.

  You cannot remove, replace or update the graphics card.
  The graphics chip is attached to the motherboard and it of not possible to remove it.
  In addition, the motherboard is compatible only with the current graphics chip.

  Good bye

• How to change the infrared port on Satellite M30 to be IrDA to be direct IR?

  Hello world

  I just bought a new watch that should be able to communicate with a pc via the infrared port (it's the Polar S710).
  Unfortunately, it does not work as the 'Protocol' of the watch is directIR, rather than be IrDA, as is my cell phone.

  I saw somewhere that it would be possible to change the infrared port of my laptop in order to operate in directIR. Anyone know the procedure? I think I could change something directly in the driver, but I did not how to deal with.

  I would be very grateful if someone could help me.

  Thank you
  SEB

  Hello

  I think that it of not possible to change the IrDA Protocol on the laptop.
  But have you tried to update the software polar?
  Consult the manufacturing site:
  http://support.polar.fi/PKBSupport.nsf/library?OpenForm

  If this does not help I think that only and an external solution as USB-> DirectIR dongle help

• How to change the motherboard on my Satellite L655D password?

  I need to change the password on my laptop Toshiba Satellite L655d motherboard, but I don't know where I can.
  I'll be very grateful if someone can help me.

  Concerning

  Full Saravia

  Password motherboard, you mean the BIOS password. Right?

  First of all, he must know the old password you?
  If you do not know the old password to the BIOS, you will not be able to remove this
  In this case, you will need to contact the ASP from Toshiba (service) in your country.
  The technician would be able to remove an unknown password.

• How to change the DD in a Satellite CL10-B-100

  Hello! One night I closed my laptop down normally. The next morning, it wouldn't start, boot disc error.
  So I started on a Win 8 DVD to fix it, but he didn't see C:

  I think that SD is out (I think this is a record of MEM) if I tried to open it to change the DD or test it on another computer.
  I could disassemble the back but I don't see the DD. So I guess it's just behind the keyboard.
  But I don't know how I can get to him.

  I tried a manual but I can't find.

  Can you explain to me how I can change the DD?

  Thank you very much!

  Hello, a little for my question. I want to change the disk because the computer does not start: introduce a system startup disk... But where's the record?
  Help, please!

  Thank you very much!

• How to remap the keys FN on Satellite Pro nb10t

  Hello

  I got a nb10t Satellite Pro, good machine but key card looks really bad for me, [Home] and [end] keys are really far from arrows, really narrow [Tab] key, slowing really office work.

  How can I remap keys, for example to the value [home] [Fn] + [above], and {End] to [Fn] + [down]?}

  Found RemapKey Microsoft, but does not have the FN key.

  Thank you

  According to the mode settings special function key, you can use the function key (F key) with or without pressing the FN key extra.

  Details here
  http://APS2.toshiba-tro.de/KB0/HTD2503B90001R01.htm

  The FN key seems to be a characteristic of Toshiba and I don t think you could remap the FN key.

  However, you can try to install the Remapkey.exe that is part of the Windows Server 2003 Resource Kit. The remapkey should allow you to change the functionality of the button.

  Also, the 3rd third-party tool like autohotkey would be good enough to make this work.

• Strange problem with the module memory series Satellite Pro 4300

  I have a laptop Toshiba satellite pro 4300 series with 64 MB onboard + 64 MB Module and I want to upgrade my memory to 320 MB. I bought two ram of 128 MB each. I removed the 64 MB module and I put a 128 MB module into the slot (A) one, but I saw that the total memory is 128 MB again.

  I removed the module again and I put the second module in the connector (A), but I saw that the total memory is 128 MB again. After that, I put the two modules in my notebook (Slot A and slot B) but I see that the total memory is 192 MB. This means that it recognizes each module as 64 MB as opposed to 128 MB. Dose anyone know why this happens?
  And what do I do about it?

  Thank you.
  [email protected]

  Hello

  Well, I put t know why this happens. It seems that the 128 MB modules are 64 MB modules. I know that it of strange but I have only this explanation. You are 100% sure that both modules of memory 128 MB?
  In my opinion, you should check the bars of memory if they have 128 MB.

  Good bye

• Impossible to change the bright screen on Satellite Pro C50-A-143

  I run windows 8.1 and I could not change the brightness of the screen for a while now.

  It happened a few months before, but after a random number of days that it worked again, now it is stuck in about 60% bright max, which is not enough when the sun comes through the window.

  According to the Toshiba Satellite Pro C50-A-143 datasheet this laptop has been preloaded with Win 7 64 bit and Win additional 8.1 own drive was part of the package.
  I assume that you have installed own 8.1 win but have not installed all the drivers Toshiba win 8.1.

  Is this correct?

  Visit the page of the Toshiba UE driver, install all the drivers, tools and utilities (graphic card drivers display tool, driver Toshiba system, etc.)
  Utility function key Toshiba is very important if it is to use the key function (Fn, F1-10)

  Then you should be able to use the function key to decrease and increase the brightness of the display.

• How to enter the BIOS on my Satellite Pro S300 settings?

  Hello

  It may sound silly, but I'm trying to access the BIOS on my TOSHIBA Satellite Pro S300-EZ1511 menu and I can't, I searched for this on the manual but I couldn't find anything.

  I need to go there if I change the SATA to IDE settings so I can install windows XP system after I formatted the Vista.

  Thank you

  It should be in the manual somewhere.

  Turn on the laptop and hold the ESCAPE key. When it prompts you, and then press F1.