How to change the modules of knowledge pre-bulit?

Similar Questions

• How to change the voicemail number Palm Pre (Bell Mobility)?

  Hi all...

  I wonder if someone has found a way to change/edit the phone number of voicemail by default on the Palm Pre. When I touch to listen to my voicemail on my pre, it dials my phone number (instead of composing the Bell number requires me to dial which is #902393xxxx pp then my password digital - note the # beforehand), which comes in turn allows me to leave a new message for me.

  I talked to Palm support and they told me that my phone is setup and working correctly and it must be a problem with my service provider. I've been a happy Bell customer for 10 years or more and I am sure that my voicemail works well... Just to be sure I contacted support Bell and they assured me that I have to dial sign # in front of my 10-digit number, then my password to access my voicemail.

  I know I could just program an another SpeedDial to accomplish this task, however, I can't believe that there is no way to use this function as expected?

  Thoughts?

  Thank you...

  Well Yes, it's gets me too. I'll speak to a Bell representative tomorrow, but is this the silver bullet...

  Create a contact in your address book called voicemail

  Then you enter the number you need. I found the # key registers correctly.

  For a sweet break (2 seconds, no prompt) use the letter 't'

  to pause farm (a prompt will appear on the dial to press a key to continue dialing pad) use the letter 'p '.

  That should do it.

  I went a step further. And if you're not too nervous about to search your phone (and if you have time) I made a few changes that did get to voicemail even easier than pulling the top of the dial pad. Slight caveat about this, it is really involved, may be too involved for you, but it made me love what you can do with the Pre

  I went to the Central meadow, I configured my pre for Homebrew applications (not too hard, and had to do it on a computer with XP, it did not Win 7) I downloaded a homebrew application called launch pad (Super easy, done right the phone). I created my voicemail number to be an icon in the launch area. THEN, and this is the super cool part. I touch AND HOLD on one of the icons in the launch at the bottom of the screen until there is a ripple around her. I drag it to the launch area to take him out of the launch bar. Then I reach and grab the voicemail icon, until the ripple and drag it in the launch, and PRESTO, I have a button to access my voicemail.

  Again, I understand that this process may be too involved for you. But with a little sniffing around, I was able to add my voicemail on the launch I can access any program at any time.

  Yes I think Palm should do a better job with documentation. Their new philosophy that people don't want uninvolved help or manual files is silent. BUT I liked the fact that with a little work, you can do MUCH more functional phone. We would have to do the work? No, but I have a good feeling that Palm will impliment better functionality as time passes. They have always in the past. And until that happens, there are a few tweeks that can help until this happens.

  Love the pre so far...

• How to change the module RAM in Satellite Pro A100 (PSAACE)?

  Hey,.

  I just bought a RAM module to fit in my currently empty home of RAM, but I never installed any portable computer memort before that. I checked a few guides, but none seem to show the kind of clips that have the Pro A100.

  Could someone help me please by pointing me in the direction of a specific guide or taking their time to explain the process.

  Thank you in advance.
  Jason

  On the side at the bottom in the middle is placed the memory cover. Remove it and you'll see two memory slots there. I assume that your device comes with the memory module and new you must put in the empty socket and just press it. Two metal brackets will fix it in the right position.

  That's all you need to do. By the way: before you start doing anything, I recommend you disconnect AC power and also to remove battery.

• Satellite U400 - 15G - overheating-how to change the cooling module?

  Hello

  My Satellite U400 15 G is overheating (CPU up to 70 ° c). NEITER in Google nor in the manual, I can find a statement, how to open and change the cooling module. (I'm only trying to change mine, because garranty is already gone)

  Does anyone know how to open the laptop/notebook and how to change the cooling module?

  Thanks in advance

  Post edited by: bla42

  Before you continue just a matter of discussion:
  Let's say I help you with this and damage you something or broke a plastic part, what you will do in this case?
  I mean you probably know that you can get a few small important parts as separate components.

  By the way: this description may be provided in the manual. Disassembly of the laptop is authorized personal only. When you buy a new car it is no description how to disassemble the entire engine, right?

  By the way: Jeanine's right. See this page. There are many useful tips on laptop disassembly procedure.

• How to change the color of pre-rendered screen.

  My question is how to change the color of the page that is displayed before a site is fully charged. So let's say I go to a site where the background color is red. Before the end of Firefox loading it will appear as white. Also yes I have known that I have an add-on which changes the default color of YouTube. However the first picture comes on all websites no matter if their background is white or not.

  You can try the userChrome.css code or elegant.

  Add code to the file userChrome.css below default @namespace.

  • http://KB.mozillazine.org/userChrome.CSS

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  browser {background-color:#f0f0f0!important}
  

  The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the folder of chrome in the Firefox profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • Create the folder chrome (lowercase) in the .default < xxxxxxxx > profile folder if the folder does not exist
  • Use a text editor like Notepad to create a userChrome.css (new) file in the folder chrome (file name is case sensitive)
  • Paste the code in the userChrome.css file in the Editor window
  • Make sure that the userChrome.css file starts with the default @namespace line
  • Make sure that you select "All files" and not "text files" when you save the file via "save file as" in the text editor as userChrome.css.
    Otherwise, Windows can add a hidden .txt file extension and you end up with one does not not userChrome.css.txt file

• How to change the template used in the photo gallery module

  I noticed the photo galleries are rendered as an HTML table and I would like to make a small change to the way in which the Gallery is rendered on the page.

  Basically, I want to just wrap a DIV around the < img > tag so that I can control the appearance of the image through my own CSS.

  In my view, there is the possibility to change the Module Templates, but the photo gallery module is not listed there.

  Where can I get the model used for a photo gallery?

  Otherwise, I'll need display the images myself using a flow XML and jQuery, but I prefer to use the modules of British Colombia when I can.

  Hi David,

  There is no model for the photo galleries. But if you use Firebug you can find the css values and add your own modification by adding CSS by the switch as well as the current gallery to your own page and use them! Value to write to the css gallery.

• How to change the color of Satellite Pro P300 settings

  I just received my new laptop computer and cannot for the life of me find how to change the color settings in the monitor.
  My old desk there was a button on the monitor.

  In a first time laptop user im nuts will try to find how to change my monitor settings...

  If anyone can help id be so grateful

  Please don t mix the portable computers internal monitor with external PC monitor.
  You won't find any control unit and on the external monitor that would help you to change the color.

  I put t know what your laptop smart chart uses but my laptop supports Intel graphics card and pre-installed (in Control Panel) Intel Graphics Media Accelerator provides a few color correction settings.
  The parameters are; color, gamma, brightness and contrast

  Here, you can set values between 0 and 100

  Maybe it's what you're looking for

• How to change the shutdown preferences in Windows XP?

  Original title: how to get the option in the list and selecting turn off computer option rather wide stand-by, turn off, restart icons in win xp sp3 proff

  standby Turn off reboot

  in the list

  Wait a second
  Disable
  Restart

  example of

  What do you do on the computer

  Hello

  I suggest you to see the steps in the link with the work on the issue.

  How to change the logon window and the shutdown preferences in Windows XP

  http://support.Microsoft.com/kb/291559

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  Hope this information is useful.

• I don't know how to change the size and quality of the text on the screen on Windows 7

  I just installed a new Windows 7 but I don't know how to change the size and quality of the text on the screen.  I tried all the things normal, resolution, size of icons, dpi etc but nothing gives me what I want.  The text in clear 'wonderful' thing is just terrible.  When I go through the 4 steps I see no text boxes which make the text nothing better.  All options are terrible, so the result on screen is too terrible.  When I do any huge I do not get a full screen of things - view the Start button disappears or I did not closing small cross at the top - of the suggestions to inprove the situation?  I must mention that my screen/monitor is 2006 - I need to buy a new one?  How much is this Windows 7 is going to cost me, or maybe I should go back to XP!

  I sincerely thank all you smart "technicians" for all the answers you always gave myself and all others who ask questions.  I'm not too smart with all this new technology as I fell into it very late.  I am now in my 60s and only started using a pc when I was over 50 years so...  In any case, I asked a question about the size of screen resolution and text and received much good advice from all that you guys.  I had recently changed in XP to Windows 7.  However, the bit of advice that I was given in 'Cyberking' here at the Portugal had set the resolution of the screen, the advanced settings, 75 to 60 Hertz Monitor tab.  Very basic, and the first question asked the technician (Lady) was "what size is your screen?  Naturally as a smaller screen that any 'techno' would be considered dead aid, solving the problem was simple and straightforward without me having to stretch my knowledge and my skills by downloading all programes weird (to me) or do the funny stuff in the bios or something else.  I send this comment to you for you to realize that the simple solution is not always bad and maybe we should go for the easiest first and then work up to the more difficult ones.

  Just for you all to see - now my screen resolution is perfect, the text on the screen is clear and legible without difficulty, even though the size of text and icon is small.  Clarity is all!

  Thank you all once again!   Best regards, Blondie blue.

• How to change the image field captures screenshots automatically from BMP to JPEG

  How to change the image field captures screenshots automatically from BMP to JPEG

  I want to say, when I tap on the screenshot on my keyboard and paste this image in microsoft photo editor or picasa 3.0 areas of the bitmap .bmp. instead of asking the witch I´d field prefer.
  So, I open that image on the brush to convert it to. JPEG.
  It's hick very!
  is it possible to easily me this step and save or paste pictures in JPEG on my files automatically?

  Hello

  I saw that article when I was looking for one that I posted...

  I understand your problem, and the answer is that, to the best of my knowledge... NO..

  Windows records the capture in memory as bitmap, along with, even if you can paste it directly into a folder, it would be in the form of bitmap...

  The best I could find is to use the suggestion in the link I've included which refers to the

  Windows Key + PrintScreen to automatically record is in PNG format in your pictures folder...

  The only way to do what you want is with a 3rd party capture program that can be configured to save in a directory as a specific file type...

  Personally, I use a program called print screen Deluxe for this... it is a purchased program...

  I'm sure you could find something free to do what you need...

  You may need to use a different key for print screen, but the software can allow you to reprogram the PrntScrn key...

• How to change the settings of Windows 8 trackpad

  I have an Asus S400C with Windows 8 is installed and pain with my trackpad.

  I'm used to be able to scroll with two fingers on the trackpad, but this function seems to have completely abandoned.

  When I got my phone a few months ago, that this would work sporadically, but now nothing. I tried to hunt around in settings, etc. to see if it needs to be enabled/disabled, however I can not even find the trackpad settings! I searched touchpad/trackpad etc. and looked through the settings of the mouse, but none seem to control the current laptop keyboard. Instead, it maintains direct me to the tactile features on the current screen.

  I'm so use to scroll with one finger on my screen while using the mouse trackpad for other features...

  I tried to have some Google around for this online but everyone seems to have slightly different questions and no not to Asus - some answers have to give on the brand of computer - but wouldn't it be bound to the windows software and where touchpad info are stored?

  If anyone knows how to change the functions of the trackpad, or at least where to find who would be most appreciated!

  Thank you

  Hello

  There are several different manufacturers of the Trackpads. The computer manufacturer decides what trackpad to install based on compatibility with other hardware and software on the system.

  The computer manufacturer will include a utility for the trackpad, which is designed for this particular model options. It is usually a utility that adds a Trackpad tab in the Control Panel/mouse component, or it may be a separate control panel item.

  You must contact the Asus support for a solution.

  ASUSTeK Computer Inc. - Support - Knowledge S400CA:
  http://support.ASUS.com/knowledge.aspx?SLanguage=en&m=S400CA&p=3&s=481#troubleshooting

  ASUSTeK Computer Inc. - Support - Troubleshooting:

  http://support.ASUS.com/download/options.aspx?SLanguage=en&type=9

  This will have information on the hardware devices installed on this specific model and download the latest drivers.

  You can also discuss this issue with others who have this model.

  ASUSTeK Computer Inc. - Support Forums:

  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  Concerning

• How to change the Spry CSS tab

  I like to use these old screens provided with the former DW Spry tab.  I just looked in DW CC and it looks like they aren't there and more.  But anyway, I made one for my client.  Now, they want to get one of the tabs on the far right of the margin.  See the image below:

  

  I don't know yet if it's possible to do and if someone has done this before, can you tell me what code I need to change in the CSS?  I would have joined the CSS file, but it seems that you cannot attach files in this forum, so I've copied below.

  Please offer any means to change the color of the tabs, etc. - I just need to know how - or at all - this tab can be moved to the right.

  Thanks, Guy deaf

  PS I'm sorry that the CSS code does not correctly appear in this forum.  When I type this message, looks like it will display line-by-line, but it's not.  I'm sorry.

  ---------------------------------------------

  @charset "UTF-8";
  
  
  /* SpryTabbedPanels.css - version 0.6 - Spry Pre-Release 1.6.1 */
  
  
  /* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
  
  
  /* Horizontal Tabbed Panels
   *
   * The default style for a TabbedPanels widget places all tab buttons
   * (left aligned) above the content panel.
   */
  
  
  /* This is the selector for the main TabbedPanels container. For our
   * default style, this container does not contribute anything visually,
   * but it is floated left to make sure that any floating or clearing done
   * with any of its child elements are contained completely within the
   * TabbedPanels container, to minimize any impact or undesireable
   * interaction with other floated elements on the page that may be used
   * for layout.
   *
   * If you want to constrain the width of the TabbedPanels widget, set a
   * width on the TabbedPanels container. By default, the TabbedPanels widget
   * expands horizontally to fill up available space.
   *
   * The name of the class ("TabbedPanels") used in this selector is not
   * necessary to make the widget function. You can use any class name you
   * want to style the TabbedPanels container.
   */
  .TabbedPanels {
    overflow: hidden;
    margin: 0px;
    padding: 0px;
    clear: none;
    width: 100%; /* IE Hack to force proper layout when preceded by a paragraph. (hasLayout Bug)*/
  }
  
  
  /* This is the selector for the TabGroup. The TabGroup container houses
   * all of the tab buttons for each tabbed panel in the widget. This container
   * does not contribute anything visually to the look of the widget for our
   * default style.
   *
   * The name of the class ("TabbedPanelsTabGroup") used in this selector is not
   * necessary to make the widget function. You can use any class name you
   * want to style the TabGroup container.
   */
  .TabbedPanelsTabGroup {
    margin: 0px;
    padding: 0px;
  }
  
  
  /* This is the selector for the TabbedPanelsTab. This container houses
   * the title for the panel. This is also the tab "button" that the user clicks
   * on to activate the corresponding content panel so that it appears on top
   * of the other tabbed panels contained in the widget.
   *
   * For our default style, each tab is positioned relatively 1 pixel down from
   * where it wold normally render. This allows each tab to overlap the content
   * panel that renders below it. Each tab is rendered with a 1 pixel bottom
   * border that has a color that matches the top border of the current content
   * panel. This gives the appearance that the tab is being drawn behind the
   * content panel.
   *
   * The name of the class ("TabbedPanelsTab") used in this selector is not
   * necessary to make the widget function. You can use any class name you want
   * to style this tab container.
   */
  .TabbedPanelsTab {
    position: relative;
    top: 1px;
    float: left;
    padding: 5px 20px;
    margin: 0px 1px 0px 0px;
    font: bold 12px sans-serif;
    background-color: #f1c185;
    list-style: none;
    border-left: solid 1px #CCC;
    border-bottom: solid 1px #999;
    border-top: solid 1px #999;
    border-right: solid 1px #999;
    border-radius: 5px 5px 0px 0px;
    -moz-user-select: none;
    -khtml-user-select: none;
    cursor: pointer;
  }
  
  
  /* This selector is an example of how to change the appearnce of a tab button
   * container as the mouse enters it. The class "TabbedPanelsTabHover" is
   * programatically added and removed from the tab element as the mouse enters
   * and exits the container.
   */
  .TabbedPanelsTabHover {
    background-color: #ffd197;
  }
  
  
  /* This selector is an example of how to change the appearance of a tab button
   * container after the user has clicked on it to activate a content panel.
   * The class "TabbedPanelsTabSelected" is programatically added and removed
   * from the tab element as the user clicks on the tab button containers in
   * the widget.
   *
   * As mentioned above, for our default style, tab buttons are positioned
   * 1 pixel down from where it would normally render. When the tab button is
   * selected, we change its bottom border to match the background color of the
   * content panel so that it looks like the tab is part of the content panel.
   */
  .TabbedPanelsTabSelected {
    background-color: #ffe9cd;
    border-bottom: 1px solid #EEE;
  }
  
  
  /* This selector is an example of how to make a link inside of a tab button
   * look like normal text. Users may want to use links inside of a tab button
   * so that when it gets focus, the text *inside* the tab button gets a focus
   * ring around it, instead of the focus ring around the entire tab.
   */
  .TabbedPanelsTab a {
    color: black;
    text-decoration: none;
  }
  
  
  /* This is the selector for the ContentGroup. The ContentGroup container houses
   * all of the content panels for each tabbed panel in the widget. For our
   * default style, this container provides the background color and borders that
   * surround the content.
   *
   * The name of the class ("TabbedPanelsContentGroup") used in this selector is
   * not necessary to make the widget function. You can use any class name you
   * want to style the ContentGroup container.
   */
  .TabbedPanelsContentGroup {
    clear: both;
    border-top: solid 1px #999;
    background-color: #FFF;
  }
  
  
  /* This is the selector for the Content panel. The Content panel holds the
   * content for a single tabbed panel. For our default style, this container
   * provides some padding, so that the content is not pushed up against the
   * widget borders.
   *
   * The name of the class ("TabbedPanelsContent") used in this selector is
   * not necessary to make the widget function. You can use any class name you
   * want to style the Content container.
   */
  .TabbedPanelsContent {
    overflow: hidden;
    padding: 4px;
  }
  
  
  /* This selector is an example of how to change the appearnce of the currently
   * active container panel. The class "TabbedPanelsContentVisible" is
   * programatically added and removed from the content element as the panel
   * is activated/deactivated.
   */
  .TabbedPanelsContentVisible {
  }
  
  
  /* Vertical Tabbed Panels
   *
   * The following rules override some of the default rules above so that the
   * TabbedPanels widget renders with its tab buttons along the left side of
   * the currently active content panel.
   *
   * With the rules defined below, the only change that will have to be made
   * to switch a horizontal tabbed panels widget to a vertical tabbed panels
   * widget, is to use the "VTabbedPanels" class on the top-level widget
   * container element, instead of "TabbedPanels".
   */
  
  
  .VTabbedPanels {
    overflow: hidden;
    zoom: 1;
  }
  
  
  /* This selector floats the TabGroup so that the tab buttons it contains
   * render to the left of the active content panel. A border is drawn around
   * the group container to make it look like a list container.
   */
  .VTabbedPanels .TabbedPanelsTabGroup {
    float: left;
    width: 10em;
    height: 20em;
    background-color: #EEE;
    position: relative;
    border-top: solid 1px #999;
    border-right: solid 1px #999;
    border-left: solid 1px #CCC;
    border-bottom: solid 1px #CCC;
  }
  
  
  /* This selector disables the float property that is placed on each tab button
   * by the default TabbedPanelsTab selector rule above. It also draws a bottom
   * border for the tab. The tab button will get its left and right border from
   * the TabGroup, and its top border from the TabGroup or tab button above it.
   */
  .VTabbedPanels .TabbedPanelsTab {
    float: none;
    margin: 0px;
    border-top: none;
    border-left: none;
    border-right: none;
  }
  
  
  /* This selector disables the float property that is placed on each tab button
   * by the default TabbedPanelsTab selector rule above. It also draws a bottom
   * border for the tab. The tab button will get its left and right border from
   * the TabGroup, and its top border from the TabGroup or tab button above it.
   */
  .VTabbedPanels .TabbedPanelsTabSelected {
    background-color: #EEE;
    border-bottom: solid 1px #999;
  }
  
  
  /* This selector floats the content panels for the widget so that they
   * render to the right of the tabbed buttons.
   */
  .VTabbedPanels .TabbedPanelsContentGroup {
    clear: none;
    float: left;
    padding: 0px;
    width: 30em;
    height: 20em;
  }
  
  
  /* Styles for Printing */
  @media print {
  .TabbedPanels {
    overflow: visible !important;
  }
  .TabbedPanelsContentGroup {
    display: block !important;
    overflow: visible !important;
    height: auto !important;
  }
  .TabbedPanelsContent {
    overflow: visible !important;
    display: block !important;
    clear:both !important;
  }
  .TabbedPanelsTab {
    overflow: visible !important;
    display: block !important;
    clear:both !important;
  }
  }
  

  !-[CodeBlockStart:dffe5525-a787-4a98-a87f-f24554b12141]-->@charset 'UTF-8'; / * SpryTabbedPanels.css - 0.6 - pre-release Spry 1.6.1 version * / / * Copyright (c) 2006] Adobe Systems Incorporated. All rights reserved. * / / * Horizontal tabbed panels * the default style for a TabbedPanels widget puts all the tab buttons * (stalled left) above the content panel. * / / * This is the selector for the main container of TabbedPanels. For our * style by default, this container does not contribute anything visually, * but it is floated to the left to ensure that all floating or compensation done * with any which of her children the elements lie entirely within the limits the * TabbedPanels container, in order to minimize any impact or unwanted * interaction with other floating elements on the page which may be used * for page layout. * If you want to limit the width of the widget TabbedPanels, define a * width of the container TabbedPanels. By default, the widget TabbedPanels * extends horizontally to fill the available space. * The name of the class ("TabbedPanels") used in this selector is not * necessary to make the widget service. You can use a class name, you * want to style the TabbedPanels container. */ . TabbedPanels {overflow: hidden;}   margin: 0px;   padding: 0px;   Clear: none;   Width: 100%; / * Hack IE to force the layout correct when preceded by a paragraph. (hasLayout bug) * /} / * this is the selector for the TabGroup. The container of TabGroup houses * all buttons on the tab for each tabs in the widget panel. This container * does not contribute to what both visually in the appearance of the widget for our * default style. * The name of the class ("TabbedPanelsTabGroup") used in this selector is not * necessary to make the widget service. You can use a class name, you * want to style the TabGroup container. */ . TabbedPanelsTabGroup {margin: 0px;}   padding: 0px; } / * This is the selector for the TabbedPanelsTab. This container houses * the title of the Panel. It is also tab 'button' that the user clicks on * to activate the corresponding content panel so that it appears on top * of the other tabs in the widget panels. * For our style by default, each tab is positioned relatively 1 pixel down from * where it would normally. This allows each tab overlap content * panel that renders underneath. Each tab is rendered with a background of 1 pixel * border which has a color that corresponds to the upper edge of the current content * panel. This gives the appearance that the tab is drawn behind the * content panel. * The name of the class ("TabbedPanelsTab") used in this selector is not * necessary to make the widget service. You can use any class name you want * to style the tab container. */ . TabbedPanelsTab {position: relative;}   Top: 1px;   float: left;   padding: 5px 20px;   margin: 0px 1px 0px 0px;   Police: bold 12px without serif.   background-color: #f1c185;   list-style: none;   border-left: 1px solid #CCC;   border-bottom: 1px solid #999;   border-top: 1px solid #999;   border-right: 1px solid #999;   border-radius: 5px 0px 5px 0px;   -moz-user-select: none;   -khtml-user-select: none;   cursor: pointer; } / * This selector is an example how to change the appearance of a button in the tab * container as the mouse enters in the it. The class is "TabbedPanelsTabHover" * programatically add and remove the element tab as the mouse between in * in and out of the container. */ . TabbedPanelsTabHover {background-color: #ffd197 ;} / * this selector is an example how to do to change the appearance of a button in the tab * container after the user has clicked on it to activate a content panel.} * The 'TabbedPanelsTabSelected' class is programmatically added and removed * the tab element as long as the user clicks button tab containers in * the widget. * As mentioned above, for our style by default, the tab buttons are positioned * 1 pixel down where he would normally. What is the tab key * selected, we change its bottom border to match the background color of the * content panel so that it looks like the tab is the content panel. */ . TabbedPanelsTabSelected {background-color: #ffe9cd;}   border-bottom: 1px solid #EEE; } / * This selector is an example of how to make a link inside a tab button * look like normal text. Users may want to use the links within a tab button * so that when it gets the focus, the text * inside * the tab button gets a focus * ring around it, instead of the ring around the whole tab. * /. TabbedPanelsTab a {color: black;}   text-decoration: none; } / * This is the selector for the ContentGroup. The ContentGroup container houses * all panels of content for each tabs in the widget panel. For our * style by default, this container provides the background color and borders that * surround content. * The name of the class ("TabbedPanelsContentGroup") used in this selector is * not necessary to make the widget function. You can use a class name, you * want to style the ContentGroup container. */ . TabbedPanelsContentGroup {clear: both;}   border-top: 1px solid #999;   background-color: #FFF; } / * This is the selector for the content panel. The content panel contains the * content for a single panel tabs. For our default style, this container * provides some padding, so that content is not pushed upward against the * widget borders. * The name of the class ("TabbedPanelsContent") used in this selector is * not necessary to make the widget function. You can use a class name, you * want to style the content container. */ . TabbedPanelsContent {overflow: hidden;}   padding: 4px; } / * This selector is an example of how to change the appearance of the currently * active panel container. The class is "TabbedPanelsContentVisible" * programatically added and removed from the content as the Panel item * is enabled/disabled. */ . TabbedPanelsContentVisible {} / * vertical tabbed panels * following rules override some of the default rules above so that the * TabbedPanels widget is rendered with its buttons on the tab on the left of * the active content panel. * With the rules defined below, the only change that will be made * to move a widget panels to horizontal tabs to vertical tabbed panels * widget, is to use the 'VTabbedPanels' class on the top-level widget * element container, instead of "TabbedPanels. */ . VTabbedPanels {overflow: hidden;}   Zoom: 1; } / * This selector floats the TabGroup so that the tab buttons it contains * make left of active content panel. A border is drawn around * the group container to make it look like a container from the list. */ . VTabbedPanels. TabbedPanelsTabGroup {float: left;}   Width: 10em;   height: 20em;   background-color: #EEE;   position: relative;   border-top: 1px solid #999;   border-right: 1px solid #999;   border-left: 1px solid #CCC;   border-bottom: 1px solid #CCC; } / * This selector disables the float property that is placed on each button of the tab * by the rule above TabbedPanelsTab default selector. He also draws a background * border for the tab. The tab button will get his left and right border of * the TabGroup and its superior border of the tab above it or button TabGroup. */ . VTabbedPanels. TabbedPanelsTab {float: none;}   margin: 0px;   border-top: none;   border-left: none;   border-right: none; } / * This selector disables the float property that is placed on each button of the tab * by the rule above TabbedPanelsTab default selector. He also draws a background * border for the tab. The tab button will get his left and right border of * the TabGroup and its superior border of the tab above it or button TabGroup. */ . VTabbedPanels. TabbedPanelsTabSelected {background-color: #EEE;}   border-bottom: 1px solid #999; } / * This selector fleet contained signs of the widget while they * make it to the right of the tabs buttons. */ . VTabbedPanels. TabbedPanelsContentGroup {clear: none;}   float: left;   padding: 0px;   Width: 30em;   height: 20em; } / * Printing styles * / @media print {.} TabbedPanels {overflow: visible! important;}. TabbedPanelsContentGroup {display: block! important;}   overflow: visible! important;   height: auto! important; } . TabbedPanelsContent {overflow: visible! important;}   display: block! important;   clear: both! important; } . TabbedPanelsTab {overflow: visible! important;}   display: block! important;   clear: both! important; } }

  Add the class like below:

• Open Ocean

Delete the following in your css spry as file its in the ' query print media "and has no effect on the screen - have added you it to the wrong place."

{.alignRight}

position: relative;

Top: 1px;

float: right! important;

padding: 5px 20px;

margin: 0px 1px 0px 0px;

Police: bold 12px without serif.

background-color: #f1c185;

list-style: none;

border-left: 1px solid #CCC;

border-bottom: 1px solid #999;

border-top: 1px solid #999;

border-right: 1px solid #999;

border-radius: 5px 0px 5px 0px;

-moz-user-select: none;

-khtml-user-select: none;

cursor: pointer;

}

Add the below css just above the press query written:

{.alignRight}

float: right! important;

}

/ * Print styles * /.

@media print {}

• How to change the settings for time-out HFM in version 9.3.3

  
  Dear experts:

  We wonder how to change the setting of user HFM time-out in HFM 9.3.3 running Apache Web server. I found the discussion for HDM 1.1.2 in this forum, but we have this old version of HFM. Please notify.

  Thank you in advance.

  Hello

  Review of the below mentioned knowledge article.

  Hyperion Financial Management error "Session expired" (Doc ID 1372208.1)

  Hope this helps,

  Thank you

  Charles Babu J

• Slide show - how to change the sequence of images

  How to change the sequence of images in the slide show.

  I'm trying to highlight in the film strip, and I can drag.  But, when I try to place it somewhere else, it comes in the original location.

  What I am doing wrong?

  Yu can not change the order of the images in the slideshow module.

  To change the order, go to the library module (must be seen grid), enter the part of the image of the thumbnail and drag if it is a new position in the sequence. Switch to the slide show module when all the pictures are in the order of preference, and then create a Collection of slide show. The order and the setting is stored in the collection.

• How to change the iPhone camera shutter sound 7

  How to change the iPhone camera shutter sound 7?

  Hello

  To adjust the volume of the sound of the camera shutter:

  • Use the settings ringer and alerts:
    • On iPhone 7 and iPhone 7 more, go to: settings > sounds and haptic.
    • (Other models, go to settings > sounds).
  • Or turn mute off / on using the switch on the side of your iPhone's ring/silent.
    • (The mute function is disabled in some countries).