How to change the name of the application that appears in the pages of an application?

Similar Questions

• How to change the page numbers after adding & save page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers

  How to change the page numbers after you add and save the page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers.

  These page numbers were initially created using Acrobat PDF header and footer.

  I have a 750 page pdf document that I've created.

  I have to sometimes the pages up and down after that I added the page numbers in the document by using the Header_Footer tool on the right column of tools.

  But after you save the document, if I get a few pages around, I can't go back and change the page numbers.

  I thought that the page numbers, as indicated in the header and footer must have changed automatically, but I guess that once its print, that it cannot be edited - is that, as what is?

  So I guess we should always first get a copy without numbers of pages before confirming the documents and the creation of an index.

  A way to remove these page numbers already there and add new page numbers.

  Its a lot of work to align 750 court documents and then realize that you must move some and then realize the page numbers cannot be changed and thus begin to do this all over again to compile which can take about 10 hours.

  My question is quite simple, but I hope that overall, I got my point. Sorry if I made it is too complex.

  If no simple way, want to know if anyone has another different tool or a few recommendations to better highlight what I'm doing wrong.

  Thank you for your review and response.

  You should be able to update with tools - Pages - header & foot-

  Update... It not work for you?

  If this isn't the case, then try to remove from this menu and then re - adding them.

  Tuesday, June 23, 2015 23:55, Fortune Mile [email protected]>

• How to change the pages look one at 100% to 90%

  All my pages can load on 90% - my husband added a printer wireless to my laptop and now the pages are loading in 100% - I want to return to the 90% load - HOW?

  If you are referring to IE, try this:

  In your status bar, bottom-right, Point on the Zoom, click the menu drop down > click Custom > set it to 90% >, click OK.

  HTH

• Hello! How to change the page templates in Business Catalyst?

  Hi all

  I'm relatively new to Business Catalyst. I'm working on my e-commerce site that I originally created in Adobe Muse.

  I want to create a page template in British Colombia for the page of the e-commerce site... and I don't know how the template of style... is anyway I can attach the CSS file for the model? I have found no option for this. I intend to create a page template that I can continue to add new products as and when I want to.

  My knowledge of html and CSS is very limited and fight with the same. So, I would appreciate any help that anyone can give to the creation of a new page template for a beginner like me.

  Thanks in advance!

  Rgds,

  ~ Arti

  Thank you for posting.

  You can download a CSS file in the folder CSS in the folder root of your business catalyst site. Please refer to the following screenshot:

  http://aishday2.worldsecuresystems.com/Aish/2012-10-16_1447_001.PNG

  Once you have downloaded the file, you can link it to your model as shown in the following screenshot:

  http://aishday2.worldsecuresystems.com/Aish/2012-10-16_1432_002.PNG

  Best regards,

  Scott Rouanet

• How to change the page that appears when I open the page new tab using the sign + on the tab bar?

  every time I open a new tab using + sign on the tabs bar, a Web site appears, which I was not aware. I want just the old rear setting. It must be my fault of friends. Help, please.

  You can do this on the topic: config page by resetting the pref browser.newtab.url via the context menu.

  See this article on the page tab (topic: newtab):

  • https://support.Mozilla.org/KB/new-tab-page-show-hide-and-customize-top-sites

• How to change the page number

  

  by using this object.

  Thank you.

  I got the answer.

  app.activeDocument.documentPreferences.startPageNumber = 15;

  Thank you interesting.

• How to change the number of minutes for the exercise of the activity of the application

  How to change the number of minutes for the exercise of the activity of the application

  Hello

  It is not currently possible to change the goal of daily exercise.

  If you want to suggest that Apple consider adding this option, you can submit a request here:

  https://www.Apple.com/feedback/watch.html

• How to change the application installed HARD disk?

  My PC following setting:

  C: is for Window XP OS

  D: is installed application

  because the disc is not enough space and need to buy a new SATA III HARD disk after formatting under drive Z:

  I copy everything in D: z: readers and I would exchange the disks for the following parameter:

  D: old drive will become Z: drive for backup

  Z: old disk will become D: drive for installed application, because many applications and installed adjustment use the D: drive for application, so I'd like to preserve the D: drive for application, but I get no idea on how to swap the disks.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  This article describes how to change the drive letters on drives:

  "How to change drive letter assignments in Windows XP"
    <>http://support.Microsoft.com/kb/307844 >

  HTH,
  JW

• Smartphones blackBerry how to change the user name of e-mail on a Blackberry Curve 9320.

  Dear community,

  I have a Blackberry Curve 9320. My company has recently changed their messaging system so I need to create a new e-mail account. Creating the account of electronic mail is not a problem. However. some settings need to be changed. When I go on settings, navigation key allows me to change the change the server info, type my password etc. However, I'm unable to change the user name. My device automatically generates a username of email that is not correct and I am unable to change because the navigation button jumps on this area. Can someone advise me on how a change the username of email on a curve 9320. Thank you.

  IT WORKED! Thank you very much. Force the unit to offer "I'll give you the parameters" was the thing. Have a great day.

• How to change the icon of the Application on Blackberry JDE 6

  Hi, do someone know how to change the icon of the application of the project, we have created in the JDE? I searched the forum, and suggestions should go to the project properties, go to the "resources" tab and add the icon file. I have also included the file icon (PNG 68x68pixel) to the project.
  But this does not seem to work for me.
  I also tried to build clean, remove files jad and others, always not when I tried the app Simulator or on real device. Any help will be appreciated.
  I use Blackberry JDE 6, test the application on the actual device (9800), Simulator (9700). And the app that I'm testing is just a pushscreen simple helloWorld app, not a lot of code here. Thank you.

  Here's how to put the icon in BlackBerry JDE.

  1. Add the image to your project.
  2. Right-click on the image and choose Properties.
  3. Check "use as icon for the Application.
  4. Rebuild the application.

• How to change the icon of the application where the application focus?

  Hello guys

  I want to know how to change the application icon focus when the application.

  I know how to create the icon of the Application, such as insert icon-> properties-> use as the application icon.

  Do you know how to insert the second icon to the project?

  Please help me guys

  TNX'

  Hello

  Ago may messages on roll on icon.

  This is the KB article for the overview icon.

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800608/...

  KB article for icon creation.

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800608/...

  TNX.

• How to change the boot order for the applications to the taskbar?

  When I moved to W7, software of my trackball wouldn't work and Kensington wouldn't fix, so I moved to a conventional mouse. I recently bought a better mouse and it has its own software. The software works very well, the problem is that it starts towards the end of the boot sequence. I would like to start earlier. The problem is that all the research I've done changing the order of departure come back with how to change the order of display in the taskbar.

  How can I change the boot order for the applications to the taskbar for the software for the mouse, boots earlier in the list?

  Windows does not have native to adjust the boot order, but there are third party solutions. See

  http://www.howtogeek.com/52043/how-to-control-the-order-of-startup-programs-in-Windows/

• How to change the name of provisioned resource account

  Hello

  In the custom connector that we have currently in place when an account is put in service the name of the account appears as a random value.

  How do change the name of the account funded from this random number to some loginid to say name invalid.

  Thanks in advance.

  Try the following steps:

  To change the name of the account to the account user id, you can follow the instructions below:

  1. open the form of the process of the resource that you want to display the user id as the name of account, instead of this strange number for example. UD_IPNT_USR

  2. create a new version of the form.

  3. go in the Properties tab.

  4. Select the user ID property and click on add property button.

  5. Select the account name and the value is false.

  6. save the form and make the version active.

  7 connect to IOM self-service console, select a user with iplanet account for her. You can see the user id of the account in the account instead of the strange number name,

• How to change the application apps and the sysadmin password

  Hi expert,

  I know not how to change the password application and sysadmin in the oracle application. but I have a doubt.

  What is required at the bottom of the application when you go to change applications and the sysadmin password in the oracle application.

  Please suggest me what is the proper way to change the apps and the sysadmin password.

  to change the password for apps I followed the command below.

  FNDCPASS apps/apps 0 System/Manager SYSTEM APPLSYS < new password for applications >

  for sysadmin

  FNDCPASS apps/apps 0 USER sysadmin < new passwd for sysadmin > System/Manager

  Please clear my doubt.

  Thanks and greetings

  pritesh Rodriguez

  
  

  
  

  I know not how to change the password application and sysadmin in the oracle application. but I have a doubt.

  What is required at the bottom of the application when you go to change applications and the sysadmin password in the oracle application.

  You must stop the services before you can change the password of user apps, and then run the automatic configuration after changing the password and eventually train services to the top.

  Stop down services or the AutoConfig running is not required for SYSADMIN (and other users of the application).

  Please suggest me what is the proper way to change the apps and the sysadmin password.

  to change the password for apps I followed the command below.

  FNDCPASS apps/apps 0 SYSTEM APPLSYS System/Manager

  for sysadmin

  FNDCPASS apps/apps 0 system/sysadmin USER Manager

  Please clear my doubt.

  What change Applications using the apps schema password change Utility (FNDCPASS or AFPASSWD) (Doc ID 437260.1)

  Loss of password SYSADMIN. How to know the password of the user SYSADMIN (Doc ID 1066661.1)

  Thank you

  Hussein

  
  

• How 2 change the name of image, including its .xmp file?

  How 2 change the name of image, including its .xmp file?

  I suppose that if I change image file name, the file '.xmp' that accompanies it will no longer an appropriate reference to associate. Also, I guess I can just simply change the name of the image file and give its eponymous .xmp. That means, for example, if I have:

  "This1stPhotoOfJane.dng" and "This1stPhotoOfJane.xmp"

  and change their names manually:

  "JanePhoto1.dng" and "JanePhoto1.xmp"

  It would not work.

  So is the simple way to do it?

  I have a bunch of files that I forgot to name who have already gone through the raw editor and now I would like to give them a real name as opposed to a single series of numbers they currently have.

  You should be able to bridge, since by default, the file of the side car is hidden. I think he knows enough to rename both.

  Copy the image and the file in a temporary folder, rename it and check that it actually did. If I myself remember copy or film a raw file would also move or copy the file, then it would be a good time to check that as well.

• How to change display name content in the assignments Panel?

  It sounds like such a simple question, but I've been googling and searching forums 30 minutes now with no luck.  So I was wondering if it is even possible at all.

  How can we change the name of the content in the assignments Panel?  The names given here seem random and our publishers are complaining.  I saw in other proper names beautiful screenshots and tutorials for the stories, but I was not able to understand.  How to change the name of what I've highlighted in the screenshot below?

  Thank you and sorry for what seems like such a basic question but my creators don't know and me (technical support) are waiting to understand for them.

  

  Kind regards

  -Aaron

  First check the content. Then simply click on the name of the story.

  Keep in mind that you only change the name in the Panel, not the name of the actual file BCTI.