How to change the reporting studio years

Similar Questions

• How to change the report batch header text in the report dynamically?

  Hello, everyone. Now I use teststand to measure a voltage test point.there value are a PIN in the control circuit of this values.now I want to change the report batch header text in the example of report.for, I use only one step in a sequence file and can use an expression to change the PIN value.now I want to change the header text batch report through the movement of the expression.i is not found of teststand help document.how I do?

  Thank you ~.

  my email is [email protected].

  In addition, I'm sorry to tell you that my English is poor.if you have any questions, just tell me as soon as POSSIBLE.

  I'm looking forward to your reply ~ ~ ~

  Hi sar818,

  This article points to the name of the step, you can modify with the TestStand API:

  Step.Name = "newStepName".

  You can call it is the expression of position of the step:

  

  Note that this change will only continue during execution.

• If the field of database increases in size, how to change the report to display this increase?

  Hi all

  I work with Oracle 10 g of reports and have a report that has already been created.  I need to increase the size of a field from 50 to 200 in width to accommodate a change in database.  When I click on the field and click Properties, the value of width is locked.  How can I change this?

  Thank you

  Steven

  Open your query again.

  make a tiny tiny change, maybe add a space, or something between two words. you might even be able to cancel your change (remove the space).

  Press OK.

  the reports will be realize you changed your table and adjust.

• How to change the report options to show only the results of success/failure?

  Hello

  in the report Options I have report = ASCII text file Format.

  In the Expression of filtering the results, I can choose between four preset selections (all results, exclude,..).

  But if I want to put together a custom then the first word 'Result' expression is highlighted in red
  Result.Status == 'past ' | Result.Status == "failed".

  And the error message in the ToolTip indicates: property name or an unknown variable.

  What happens then?

  THX

  OK, I lied!

  It worked for me, just by using Result.Status.

  It's ok that it shows red like that because it will assess correctly during runtime.

  Kind regards

• How to change the report based on users?

  Hi all

  I've created a report based on a table. Based on the users (Administrator, user), I want to change my appearance of report. But users are not available in this table. Users are not available in this area table.Common available.

  Req: If I enter as a user I want to not see that my documents.

  If I enter an admin I want to see all users folders.

  How to solve this problem.

  Please explain in detail.

  Thank you and best regards,

  Rambeau

  Hai raghu, pls mark closed this issue.its as a response!

• How to change the areas of region of report in read-only mode?

  How to change the areas of region of report in read-only mode?
  
  SKUD.

  Add fuction javascript after the page header (or section of function and Javascript variables)

  function disableItems(pRegionStaticId,pDisableFlag) {
    $('#'+pRegionStaticId).find('[name^=f]').each( function(){ /* matches fxx */
      if( $(this).attr('name').match(/f[0-9][0-9]/) ){
        return $(this);
      }
    }).attr('disabled',pDisableFlag);
  }
  

  pRegionStaticId is static Id + the region

  Note that this code specifically disables only the berries of request. Disabled items are not available after the submission (and are therefore different from readonly). But any javascript page can change disabled or readonly points (client side), so you need to check on the side server to validate the data.

  You can disable items to help

  disableItems ("MY_REGION_ID", true);

  and allow them, by passing false

  disableItems ("MY_REGION_ID", false);

• How to change the name of the report server?

  How can I change my name of report server that is normally generated by the combination of server Name_OracleHome. But can I use a different name for my report server and I need to change the configuration files?

  How can I change my name of report server

  See Paulo Esteves answer in How to change the name of the report server?

• How to change the column ordering the interactive report?

  How to change the column ordering the interactive report?

  Hello

  Run the report as a developer, click on the "wonder wheel", click "Select columns" and reorder your columns in the box 'report '.
  Then click again on the "wonder wheel", click on save report and save the default state.

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)

• ProBook 4440 s: how to change the settings of the bios on my hp ProBook 4440 s to increase dedicated video ram

  How to change the settings of the bios on my hp ProBook 4440 dedicated to increase video ram?
  I want to increase to play better games.
  How to change through the bios I don't know.
  Help me pls.
  
  Thank you

  The days of being able to change RAM in BIOS went Bye Bye a few years ago. It was back in the day.

  You can't make changes to the video RAM settings in BIOS.

  You can reduce the resolution if you want to increase performance in a menu of own game options, but at a cost of resolution.

• I don't know how to change the size and quality of the text on the screen on Windows 7

  I just installed a new Windows 7 but I don't know how to change the size and quality of the text on the screen.  I tried all the things normal, resolution, size of icons, dpi etc but nothing gives me what I want.  The text in clear 'wonderful' thing is just terrible.  When I go through the 4 steps I see no text boxes which make the text nothing better.  All options are terrible, so the result on screen is too terrible.  When I do any huge I do not get a full screen of things - view the Start button disappears or I did not closing small cross at the top - of the suggestions to inprove the situation?  I must mention that my screen/monitor is 2006 - I need to buy a new one?  How much is this Windows 7 is going to cost me, or maybe I should go back to XP!

  I sincerely thank all you smart "technicians" for all the answers you always gave myself and all others who ask questions.  I'm not too smart with all this new technology as I fell into it very late.  I am now in my 60s and only started using a pc when I was over 50 years so...  In any case, I asked a question about the size of screen resolution and text and received much good advice from all that you guys.  I had recently changed in XP to Windows 7.  However, the bit of advice that I was given in 'Cyberking' here at the Portugal had set the resolution of the screen, the advanced settings, 75 to 60 Hertz Monitor tab.  Very basic, and the first question asked the technician (Lady) was "what size is your screen?  Naturally as a smaller screen that any 'techno' would be considered dead aid, solving the problem was simple and straightforward without me having to stretch my knowledge and my skills by downloading all programes weird (to me) or do the funny stuff in the bios or something else.  I send this comment to you for you to realize that the simple solution is not always bad and maybe we should go for the easiest first and then work up to the more difficult ones.

  Just for you all to see - now my screen resolution is perfect, the text on the screen is clear and legible without difficulty, even though the size of text and icon is small.  Clarity is all!

  Thank you all once again!   Best regards, Blondie blue.

• How to change the number of values in the hour that are restricted.

  Hello

  May I know how to change the number of values in the hour that are restricted.

  In fact, we have improved of obiee in obiee 11g 10g. Data base is the same for Both.In 10 g the prompt value is limited to show only 35 records per page. As we passed it shows only 35 Records in 11g also. How can I change this limit to 11g.

  Please suggest me! Its urgent!

  Thanks and greetings

  Navnitha

  Hello

  In the advance tab we have the XML of the upgraded report, copy it into a Notepad and try to find the line beginning as below

  In 10g, we have something like below, simply remove the choicesPerPage = '35' from 11 g OBIEE XML report

  Thank you

  RAM

• How to change the input to Dogri language

  How to change the input to Dogri in Windows 8 language using visual studio 2005

  Hey Yusuf,

  To change the language in the Visual Studio program, I suggest you view the query in the Visual Studio forum:

  http://social.msdn.Microsoft.com/forums/vstudio/en-us/home?category=VisualStudio

• How to avoid the report query needs a unique key to identify each line

  Hello

  How to avoid the error below

  The report query needs a unique key to identify each row. The supplied key cannot be used for this query. Please change the report attributes to define a unique key column.

  I have master-detail tables but without constraints, when I created a query as dept, emp table he gave me above the error.

  Select d.deptno, e.ename

  by d, e emp dept

  where e.deptno = d.deptno

  Thank you and best regards,

  Ashish

  Hi mickael,.

  Work on interactive report?

  You must set the column link (in the attributes report) to something other than "link to display single line." You can set it to 'Exclude the column link' or 'target link to Custom.

• How to change the Login area

  Hello

  Happy New Year to ALL

  On the Login area:

  I would like to know how to change the size of the region of Login and its place.

  For example: Login area should have a = 600 height and width = 100 and should be on the right side, not in the center of the screen.

  This problem concerns oracle12, apex 4.2 and html5 theme.

  Ziut

  Ziut wrote:

  Hello

  for example: apex.oracle.com

  workspace: tb2, tb2/tb2

  App = 23705

  My comp (for example):

  

  style = "height: 600px;" Width: 100px; »

  This is only an example. Theme 26.

  Ziut

  Ziut,

  This is the closest I could come to your comp.  The simplest implementation, I found was:

  1. A region has added to the Information
  2. Place the Login area in a Sidebar area model
  3. Kept the two regions in the same Point on the screen and the same grid.

  

  I have attempted to substitute the CSS for the Login region but made very little progress and make a slurry in a perspective of support.  You should always keep in mind that another person will have to support your claim, a day, and play the more you with him, it may be more difficult to maintain if it is not well documented.

  Here's my demo:

  Username and password are all two - demo

  https://Apex.Oracle.com/pls/Apex/f?p=11956:101

  Jeff

• How to change the font, color line, column and Grand Total labels in PivotTable

  Hello Guru

  Can you get it some one please let me know how to change the look and feel of the reports in Pivot table using css files. I want to have the dimension and the measure to be of different color columns and grand total different color. I want to achieve for all pivot table reports instead of manually change each report so I want to do in css files.under s_SRIKI\b_mozilla_4\views.css I've seen a lot of options but nothing has worked. So can you please exactly tell what class we need to change to make changes. Thank you!!!

  Thank you

  SR

  For values

  . OORT {}

  text-align: right;

  vertical-align: top;

  color: Red;

  }

  For the product if you got hyper link

  Code OOB is

  . PTL {}

  color: #039;

  text-decoration: none;

  cursor: pointer;

  }

  If brand aid