My gateway Tablet close without warning. Now more trouble...

Similar Questions

• Vista close without warning

  Lately my pc has been randomly close without warning.  It doesn't seem to be compatible on when he decided to "shut down".  I noticed that if I turn it on and just leave, so it seems that the time it takes to turn off is shorter.  But the time intervals are different each time.  If I turn it on and use a heavy application immediately (like Need for Speed) and it remains on 90% of the time without problem.  I tried a number of analyses of virus and so far nothing has much turned upward.  I checked my hardware and all is well.  There is a problem in the windows registry, virus, or vista is just corrupt.

  I am running:
  Vista Business SP2
  3 GB ram
  3.0 ghz AMD Athlon 2 x
  NVIDIA 9500 GT graphics card
  PC Chips motherboard
  80 GB HD (hard drive was free, hoping to get a much bigger VERY soon)
  Hello
   
  1. don't you make changes before the show?
   
  This happens usually if the program or device driver is defective.
   
  Step 1: to find out what is causing the problem, check the event logs to find out what is causing the problem.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
   
  You can try the following steps to keep your system up to date, as it has sometimes solves the problem.
   
  Step 2: we recommend updating all drivers for devices on the computer and install the latest updates of windows for better functionality.
  To update the device driver, try the following steps.
  1. click on start, type devmgmt.msc and press to enter.
  2 to the list of issues, do a right-click on the following and click on update driver.
  a. graphics cards.
  b. the network cards.
  c. Chipset driver.
  3. If prompted, restart the computer and follow the same steps for updating other drivers.
  
  For more information about updated drivers, visit this link: http://windows.microsoft.com/en-US/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Step 3: check in safe mode.
  If the problem does not persist in safemode, it then confirms that some programs not Microsoft is causing this issue.
  Visit this link to start the computer in safe mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode
   
  If the problem persists, check the logs of events and after return details, so that we can help you further.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Satellite Pro L630 close without warning

  my laptop has been close without warning - today got an error message on any ideas - failure of the cooling system

  If it is the fan / repairable or perhaps other components default?

  Hi Yannos

  I think that your laptop turns off automatically due to high temperature.
  Probably the cooling fan (cooling module) is no functions and therefore the CPU cannot be cooled properly.

  The notification that received you today confirm my hypothesis.

  In my opinion, the cooling module must be checked and probably replaced in order to solve the problem of cooling.

• my lap top was close without warning or command especially when I watch movies online

  my lap top was close without warning or command especially when I watch movies online.i just ts will puff and must be reseeded again and again

  my lap top was close without warning or command especially when I watch movies online.i just ts will puff and must be reseeded again and again

  Looks like it's overheating.

  Use Bing or Google to search for information on your particular laptop (maybe the support forum for your Dell, Toshiba, HP, etc.) and determine how to combat overheating.  You may be able to 'fix' it's using compressed air to clean the vents and/or using a cooling pad under the computer laptop and even run a small fan external imed in the inlet.  May not be recommended by people IT but I often run my old laptop without battery to reduce heating.  And of course, you might have a fan does not properly.

  Doubtful that the malware is causing your problem.   You have every reason to think otherwise - no evidence of infection

  Kind regards...

• Photoshop maintains close without warning or errors

  Hello

  I have a strange problem.  We just install CS5 about four months ago.  About two months ago, we started having trouble with Photshop untimely closing.  As a first step, it closed after having been open for an hour or two.  When the problem appeared first of all, I have uninstalled and reinstalled.  It worked fine for awhile, but now it closes after having been open for about five minutes.  It is not only a file - we tried with several different files.  Here's the really strange thing - we can open Illustrator or InDesign and have no problem at all.  So I'm new to Adobe, which would cause Photoshop to crash and not other applications?  We have no third-party plug-in installed and photoshop is completely up-to-date - 12.0.4.  The OS is XP pro and the user is a member of the domain and is also a member of the admins local on the computer.  Also, there is no event to the event log registration when it closes.  If there are papers relating to Adobe files, I don't know about them.  Any ideas where I should look at to solve this problem?

  Your graphics driver crashes. Install the most recent / accurate to NVidia or ATI and configure it accordingly.

  Mylenium

• C55 - A satellite - files keep close without warning

  Hello

  I have a Toshiba Satellite C55-A-1CQ with lots of free memory.
  When I try and copy images from one folder to another, it closes files and brings back me to the screen.
  I tried to move only small files rather than groups of files, but it has the same effect.

  If someone saw it, I'd appreciate it.
  Thank you
  Ben

  For me, looks like the system is confused upward... I have no idea if the cleaning system could help with this strange problem, but I recommend you to check the application "CCLeaner". It is small freeware tool that could help you to clean the system registry as well as to remove the HDD of garbage (temporal files).

  Also its recommended to defragment the HARD drive.

• Creative cloud installer closes without error message

  Hello!

  I tried to solve a problem with my CC (cannot open the update by all means) and unnistalled application from my Mac (Yosemite 10.10.5). Now, I have spent several hours trying to install back my request so that I could update my Adobe applications and access to newer versions of my co-workers work, but am unable.

  Whenever I run the installer dmg and then open the installer, it passes through 3 simple steps:

  -He asks me my admin password allow opening an image downloaded from the internet

  -It opens and bed "Installer initializing" then quickly changes to 'Desktop download creative cloud. "

  -It closes without warning or error messages boxes

  I tried some fixes to internet for instalation problems - tried to change the permissions and installing from the root user, so I know that this probably isn't a permissions problem. tried to completely uninstall applications with Adobe cleaning tool (which makes the problem even worse, because now I can not use even the apps that I need every day because I can't reinstall them). tried to change the OOBE to OOBE.old folder. Re - download setup several times; change my internet connection (to ensure that it is not my internet).

  I have no newspapers to my problem since there is no error coming. I really hope that I can resolve this soon. My computer specs are:

  MacBook Pro

  16GB 1600 MHz DDR3

  Intel Core i7 2.2 GHz

  Intel Pro Iris 1536 MB

  Thanks for any help!

  New link to the Adobe cleanup tool:

  http://download.Macromedia.com/SupportTools/cleaner/Mac/AdobeCreativeCloudCleanerTool.dmg

• Tiara closes 10 sec after start without warning

  ERROR:

  Tiara closes 10 sec after start without warning

  VERSIONS USED:

  DIAdem Version 8.00.981 and
  Measurment OR & Automation Explorer Version 4.5.0f0

  Pay ATTENTION to the DEM_ERRS.001 (German version):
  1 * Fehlerregistrierung'm TT. MM YYYY um hh: mmS [Meldungsdatei:COMMON / Textarea:13 / Textnummer:1]
  Objekt "tc1" unbekannt oder nicht offen.

  FIX:

  disable the windows service: "NI Configuration Manager.

  Thanks for your replies!

  I have now uninstalled all new driver DAQ (mx) and installed the Driver Traditional NOR-DAQ 6.9.3 (including MAX 2.2.0.3010) and DIAdem 8.0 works very well.

• a kind of automatic update suddenly without warning started to close all the documents I was working on, rebooted and lost all the changes I had made in the past three hours

  I've worked hard for three hours in the middle of the night, made extremely dfficult work on several Word documents and Excel spreadsheets. at the same time - the kind of work that you can do if you're sure not not to be interrupted. All of a sudden a few (probably Windows) update began to close the files one by one, "don't turn off your computer" was the message.
  I waited. It restarts, but then I realized all of work my three hours had disappeared. The files are still there, but in their unchanged form. How is it you lose nothing if your battery runs out and you can restore the files, that you deliberately deleted, and there is a permanent record of each tiny websearch? However, Windows can come in the night and boldly to destroy three hours of irreplaceable forced labor without warning! I won't ever be able to replace it.

  Set the automatic update process so that you can control if the updates to download and install.

  And, as a general rule, always save files regularly while you work.

  HOW to: Configure and use automatic updates in Windows XP
  http://support.Microsoft.com/kb/306525

  How to configure automatic updates by using Group Policy or of registry settings
  http://support.Microsoft.com/kb/328010

  for Vista: http://windows.microsoft.com/en-us/windows-vista/Change-how-Windows-installs-or-notifies-you-about-updates

  for Windows 7: http://windows.microsoft.com/en-AU/windows7/Change-how-Windows-installs-or-notifies-you-about-updates

  Take control, adjust your settings in THE and save your work as you go along.

  TaurArian [MVP] 2005-2010 - Update Services

• Printer under the icons of the device names changed around without warning. Printer will not work now.

  Names under icons of printer in the devices section exchanged around without warning. I can print is nothing more.

  Hello

  Please contact Microsoft Community.

  I understand that you are facing the issue on the printer.

  I will definitely help you with this.

  Please provide information below.

  1. you get any error message?

  2. what exactly happen when you try to print?

  3. don't you make changes to the pc before that?

  I suggest you go through the below methods:

  Method 1: Try to run the printer Troubleshooter:

  1. Press Windows + R key.

  2. Type of Panel, and press ENTER.

  3. Click on troubleshooting.

  4. In the left pane, click View all.

  5. In the list, click the printer and run the troubleshooter.

  Method 2: Try the clean boot:

  A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in 8.1 of Windows, Windows 8, Windows 7, or Windows Vista. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• Why the recent updates to Windows are close my IBM ThinkPad without warning? Help, please!

  Since I installed the latest Windows updates on my IBM ThinkPad (belongs to the office, one for me), the computers have decided to stop randomly without warning and without closing programs.  It happened first in the portable desktop computer and I tried a system restore, but it wouldn't.  Today, I installed on my computer but after I did a system restore.  I'll try that, but I guess that this will not help.  What can I do to get this to stop happening?   Is anyway to switch to Microsoft and tell them what is happening and have them repaired?

  OK, removing the updates does not solve my problem, so reinstalled. I solved the breaks down by turning the bottom of my screen Hardware Acceleration 1 notch. Always try to understand the underlying cause.

• 6s deletion again, cause emails sent without warning or apparent.

  During an attempt to find the errors in the composition of any email, I had important text permanently deleted without my choice and without warning. Happens after that I have 'select all' then 'talk', and while speaking, if I touch any key on the keyboard before his term speaking all the selected text is eraced without leaving a trace. Is it a defect? If this isn't the case, then what is the purpose, and I'm not a first choice? Is it possible to fix this? Thank you

  Hey Bradladley,

  I understand that you have questions about editing text in an email on your iPhone. I can delete it for you.

  From what you describe, highlighting the text and by entering the letter or number, will erase what is currently highlighted. The idea is to make changes like bold, italic, underline, and even replace highlighted text. This works in the same way as it does on your computer.

  Now one thing I want to point out is that you can cancel it if it was an accident. All you need to do is shake the iPhone and you will see a prompt message to cancel the changes that have to occur. Cancellation of the faucet and your text will come back. Check out the link below for more details.

  Change the text
  http://help.Apple.com/iPhone/9/#/iph3c50ee9e

  Take it easy

• DIRECTIONS: Print screen / Screen Capture on Gateway Tablet PC w / Windows Vista for photos/videos of office & Active Windows

  I try to use the screen capture / print screen on my gateway Tablet PC...

  I follow Windows help & support, yet when I try to paste it into Paint, it only will allow me the option "paste from ' and not 'stick' in the ' Edit '...

  What I am doing wrong? Should I do it differently on Gateway Tablet PC?

  -J' I NEED HELP from USER to Capture screen-Still and video Capture on the Windows desktop screen and the Options in the Active window.

  * The use of Screen Capture (Print Screen) on Gateway Tablet PC with the Windows Vista operating system:

  I followed HELP & SUPPORT directions exactly...

  * Gateway Tablet PC keyboard print screen says/labeled "Ins" button and immediately under the same button says "PrtSc".

  * "Help & Support" said to

  -Press the print screen key.

  -Open "paint."

  -Click on "Edit", then

  -Click "Paste"...

  Try clicking / use the "Paste" option in the "Edit" menu in the "paint" will NOT work:

  When I click on "Ins" / "PrtSc" button on a Gateway Tablet PC for the screenshot, I have:

  -Open Windows 'Paint' accessory,.

  -I click on "Edit" in the menu "painting."

  -'Paste' option is unavailable / greyed out. It will only allow me the option 'Paste From'

  -Option 'Paste From' does NOT work

  If you press your print screen and then open Paint... What is happening
  If you type...    CTRL + V...?

  Have you tried the tool capture of Vista? It is more versatile than print screen.

  Windows Vista - activate the Vista Snipping Tool
  http://www.PCWorld.com/article/137099/activate_vistas_snipping_tool.html

  Use capture tool to capture screenshots
  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots
  (Vista Home Premium, Business, Ultimate, Enterprise)

  Vista tutorial - How to use the tool captures of Vista
  http://www.Vistax64.com/tutorials/148532-how-use-Snipping-Tool-Vista.html

  Info on the video capture:

  Vista's Movie Maker can capture screenshots:

  Windows Vista - Movie Maker-
  Take and use a picture from a video frame in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/take-and-use-a-picture-from-a-video-frame-in-Windows-Movie-Maker
  Windows Media Player-
  Capture images from DVD in Windows Media Player or Real movie scenes
  http://labnol.blogspot.com/2005/11/capture-still-images-from-Windows.html

  VLC Media Player free software has also a good option for screen video capture...

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.videolan.org/

  For the installer for your screen Capture... Open VLC and
  Reach... Tools / Preferences / video button / video
  Instant image section.

  In the directory field... Search for and select a folder
  to save your captures po (for example... you could
  Create a new folder on your desktop and select)

  TO... Prefix... check the box... Sequential numbering.

  TO... Format, choose JPEG or PNG.

  Finally... on the left, click on the Save"" button.

  Now... Play the video and pause by pressing on your
  SPACEBAR when you see a screen you want to capture.

  To capture the screen... type...  SHIFT + S

  Press space to advance to the next photo...
  ect... etc...

  Also... VLC Media Player... allows to save during video playback
  and will save the segment when you stop recording. It comes
  very useful if you need a small clip of a larger video file.

  VLC 1.0 records video of the DVD
  http://Lifehacker.com/5318807/VLC-10-records-video-from-DVDs

• After that windows update, the system stops without warning and can not perform restore

  My computer automatically performed an update on yesterday now it pc closes down without warning system will not perform a restore to an earlier date that I get a message that an unexpected error occurred during restore. I tried two different restore points, any help is appreciated.

  Hello

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Windows 7 stops on its own without warning

  My pc running windows 7 Home premium keeps stopping on its own without warning - I checked and its not overheating there are a lot of ventilation. I was told that it may be registry settings but don't see why I should pay for a reg cleaner because I do not know if it will solve this problem

  A Reg cleaner will cause more problems than it will fix. If the PC stops while using it, then see the test below tools. If it stops while his idle then you will need to check and change your power plan.

  First try running Memtest86 +, that runs from a floppy disk or CD and should eliminate or
  confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours, so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Device drivers: have you installed latest drivers from device of the manufacture of the motherboard? Visit their site to support for the latest drivers as the CD that came with the motherboard may have older less stable drivers.

  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  Discover also Nvidia 'Smoke' test or equivalent ATI.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 3 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  For overclockers using stock Intel/AMD radiator and cooling fan
  You can expect temperatures of 35 to 40 ° C in idle and 60 to 65 c max when running Prime95
  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ):
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  Also has two tabs (memory and SPD) that indicates the actual speed of the memory
  and 'SPD' tab displays the nominal speeds for each memory location that is filled.
  http://www.CPUID.com/cpuz.php

  Hard drive test - CD Bootable:
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD
  For Western Digital disks using WdDiag: http://support.wdc.com/product/download.asp?lang=en
  Fujitsu utilities: http://www.fujitsu.com/us/services/computing/storage/hdd/support/utilities.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.