How to change train step of State visited in a disabled state

Similar Questions

• How to change my country United States State in Myanmar?

  How to change my country United States State in Myanmar?

  Change the country associated with your Adobe ID

• How to change the step of the custom action?

  Hi, I use Photoshop CC 2015 and I want to change the property of a single step in a custom action. A lot of people through the internet said that if you double-click on a step, you can change the properties. But when I do this, he plays just this step (not all the action, just that step). What is the right way?

  Specifically, I would like to change the properties of this step:

  

  I like to "Select the front layer WITH Make Invisible"

  Now when you choose Select layer front/rear, it ignores the invisible layers. I would like to go to the next layer, even if the layer is invisible. If anyone know the shortcut keyboard for that... then I will not need to change the step!

  
  Thank you!

  Hello, when you double click you can have an option to change if you have something like a fit, with parameters.

  In your case, I think you can fix record this step. First, make a copy of your action, just in case something is wrong and then:

  -first uncheck the check box for all the step after that you want to save again.

  -remove the step you need to register again;

  -Run your action on a single file. It stops at the last stage before the one you need to register again;

  -Click on the Begin record button in the Actions Panel;

  -make your step again with the options you need.

  -Click the button to Stop recording.

  -Check the checkbox for all the steps and action should be ready again.

• How to change my country and State will subscribe to cloud creative adobe?

  I am trying to subscribe to adobe CC, but entering my info I can change the location information. country / state are blocked on us only.

  Change/Verify account https://forums.adobe.com/thread/1465499 can help

  -Credit card https://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting-cr creative - cloud.html

  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  -e-mail https://forums.adobe.com/thread/1446019

  -http://helpx.adobe.com/x-productkb/global/didn-t-receive-expected-email.html

  -html http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id.

• How to change the "Failed" result State after the test of "success."

  We do a picture of a LCD screen and watch if his work of all. Sometimes, the LCD is good work but the step failed. Where automatic LCD test fails show us the image of the camera to the user and it can decide if the LCD for success or failure. So when the user decides that the screen is good job we have to crush the status of the automatic test demonstrating lcd screen test passed in the report and the database. I tried with

  RunState.SequenceFile.Data.Seq ["Check_LCD_V3-0"]. Hand [' 154 Execute - all horizontal Segments on "]. Result.Status = "Passed",
  RunState.SequenceFile.Data.Seq ["Check_LCD_V3-0"]. Hand [' 154 Execute - all horizontal Segments on "]. Result.PassFail = "True",

  But in the basis of the status of this step is always 'impossible '.

  What I've done wrong?

  Thank you

  Alteschwed wrote:

  We do a picture of a LCD screen and watch if his work of all. Sometimes, the LCD is good work but the step failed. Where automatic LCD test fails show us the image of the camera to the user and it can decide if the LCD for success or failure. So when the user decides that the screen is good job we have to crush the status of the automatic test demonstrating lcd screen test passed in the report and the database. I tried with

  RunState.SequenceFile.Data.Seq ["Check_LCD_V3-0"]. Hand [' 154 Execute - all horizontal Segments on "]. Result.Status = "Passed",
  RunState.SequenceFile.Data.Seq ["Check_LCD_V3-0"]. Hand [' 154 Execute - all horizontal Segments on "]. Result.PassFail = "True",

  But in the basis of the status of this step is always 'impossible '.

  What I've done wrong?

  Thank you

  I recommend the following:

  (1) that the display automatically to test an Action step rather than a step for success/failure and set to square one local variable to see if the LCD self-test failed (for example Locals.AutomatedLCDFailed).

  (2) create a new test pass/fail (using the no adapter) that takes both the variable local and entry of the user account to determine it is the condition for success/failure (for example to set the data source of the step to an expression like:!) () Locals.AutomatedLCDTestFailed & Locals.UserLCDTestFailed)

  As an alternative to do 1) a step of the Action you can leave a step for success/failure and clear step on it to "step failure causes failure of sequence. You can then use the status of this step instead of Locals.AutomatedLCDTestFailed. The only difference is that the automated test will always be displayed as failed in your report, although the sequence can still be passed. It is somewhat a matter of preference.

  Hope this helps,

  -Doug

• How to change the constant value for the property node "Disabled"?

  Hi all

  I enclose one vi example of what I'm willing to do. It happens during the event for "left selectorrogrammed 1: changing values.»

  Basically, I created a property to a Boolean LED control node. Once clicked, I'm eager to turn it off so that the user cannot change the value (I have a reset all button for use on that).

  I created the node property for this control for disabled people.  When I'm in the block diagram, I change to write mode.

  I rt clicked on it and said: ' create constant ", he does.  However, the constant comes each time as "Enabled". I tried clicking on this constant and looking through all of that property, but I can't find a way to scroll the values or set the value of this constant to "Enabled" to "disabled."

  I see where you can change the elements of this constant... but I guess there is a way to switch this constant to the value you want... any suggestions?

  Thanks in advance,

  Cayenne

  To change a constant value, your cursor must be in the mode 'finger '.

  You can select this option in holding down the SHIFT key and right-click on the diagram - then select the finger.

  Another way is to put the automatic selection of tools:

  Tools > Options > environment > lock automatic selection of tools

  With this option, LabVIEW will choose the tools for you.

  Play with him a bit to see how it works.

  Steve

• How to change the DML processes in Assistant APEX generated the data entry form

  I created a standard form of the APEX on a table using the wizard of the APEX. Now, I added a new element to the page. How to change the DML insert statement to take care of this new item? any ideas are appreciated.
  
  Thank you
  Surya

  For the new item, just keep the type of Source as the "column of the database" and give the name of the column (the column for a new item name) under the "Source value or expression.

  See you soon,.
  Hari

• Camcorder car bought in Asia, how to change the date/time United States?

  Hi, I bought the unit in Hong Kong and brought it to the United States.  After I've set the date and time, each time it starts, it is synhronize to the time and date in Asia, which is 15 hours ahead of time.  I tried to find it in the manual on how to change the region, but could not.  Is there a way I can do?  Pleaes help.  Very much appreciated.

  I found it under Satilliate synchronization, I had to press OK again to UTC is displayed.  Thank you very much for the help.

• How can I change the 'Submit' button States in muse adobe?

  How can I change the 'Submit' button States in muse adobe? Currently, I can only change the color, text, and the outline of the button, but I can't customize it as I have the other buttons in the tool.

  Use your images as a background the button fill

• How to change application´s state of a component´s function

  Hi, I m doing a Flex application,
  I created a component "usersRegister", which have the following function:
  
  private function comprobacionBBDD (): void {}
  if(numero>0) {}
  Mensaje="perfect.\n\n\n Wellcome. « ;
  HERE, I want TO CHANGE the STATE
  } else {if (number is-1)
  message = message + "mistake1."
  } else {if (number is-2)
  message = message + "Error2 \n\n";
  }
  Alert.Show (message);
  }
  
  
  
  
  The problem is that when I have instances of the component in my application, I would change my application´s state when the first 'if' the true function.
  
  Can you help me??
  
  Thanks in advance and excuse my bad English.

  Really thanks. I try and works perfectly.

• How to change the .h to correctly practice the .dll

  Hello world

  I have a problem with a .h file to control my cnc-planet engine.

  I don't know how to edit.

  For example, I have the following function not recognized by Labview:

  extern "C" CNC_ERROR CALLCONV Connect();

  I tried with: int Connect(); Int32 Connect(); int CNC_ERROR Connect() and int32 CNC_ERROR Connect() with no result.

  Perhaps, it's the statement variable...

  It is written as follows:

  enum CNC_ERROR: int
  {
  CNC_SUCCESS = 0 X 00000000.
  CNC_ERROR_FAIL = 0 X 00000001,
  CNC_ERROR_NOT_IMPLEMENTED = 0 X 00000002,
  CNC_ERROR_NOT_INITIALIZED = 0 X 00000003,
  CNC_ERROR_DEVICE_NOT_FOUND = 0 X 00000004,
  CNC_ERROR_DEVICE_NOT_READY = 0 X 00000005,
  CNC_ERROR_DEVICE_NOT_CONNECTED = 0 X 00000006,
  CNC_ERROR_SEND_FAILED = 0 X 00000007,
  CNC_ERROR_LICENSE = 0 X 00000008,
  CNC_ERROR_RAWDATA = 0 X 00000009,
  CNC_ERROR_DEVICE_PARAMS = 0X0000000A,
  };

  I don't know how to change in a way that undrestand Labview...

  Any help?

  Thank you very much.

  PS: The integral .h file

  #pragma once

  #ifndef __AFXWIN_H__
  #error include 'stdafx.h' before including this file for PCH
  #endif

  enum CNC_ERROR: int
  {
  CNC_SUCCESS = 0 X 00000000.
  CNC_ERROR_FAIL = 0 X 00000001,
  CNC_ERROR_NOT_IMPLEMENTED = 0 X 00000002,
  CNC_ERROR_NOT_INITIALIZED = 0 X 00000003,
  CNC_ERROR_DEVICE_NOT_FOUND = 0 X 00000004,
  CNC_ERROR_DEVICE_NOT_READY = 0 X 00000005,
  CNC_ERROR_DEVICE_NOT_CONNECTED = 0 X 00000006,
  CNC_ERROR_SEND_FAILED = 0 X 00000007,
  CNC_ERROR_LICENSE = 0 X 00000008,
  CNC_ERROR_RAWDATA = 0 X 00000009,
  CNC_ERROR_DEVICE_PARAMS = 0X0000000A,
  };

  enum CNC_STATUS: int
  {
  CNC_STATUS_NONE = 0 X 00010000,
  CNC_STATUS_CONNECTED = 0 X 00010001,
  CNC_STATUS_DISCONNECTED = 0 X 00010002,
  CNC_STATUS_UNPLUGED = 0 X 00010003,
  CNC_STATUS_DATAERROR = 0 X 00010004,
  };

  enum CNC_CODE: unsigned char
  {
  CNC_CODE_Unknown = 0,
  CNC_CODE_OK = 1,
  CNC_CODE_Pos = 2,
  CNC_CODE_Stop = 3,
  CNC_CODE_Error = 8,
  };

  enum CNC_PLANE: unsigned char
  {
  CNC_PLANE_Unknown = 0,
  CNC_PLANE_XY = 1,
  CNC_PLANE_YZ = 2,
  CNC_PLANE_ZX = 3,
  CNC_PLANE_UV = 4,
  CNC_PLANE_VW = 5,
  CNC_PLANE_UW = 6,
  };

  enum CNC_SPINDLE: unsigned char
  {
  CNC_SPINDLE_Unknown = 0,
  CNC_SPINDLE_Stopped = 1,
  CNC_SPINDLE_CW = 2,
  CNC_SPINDLE_CCW = 3,
  };

  enum CNC_COOLANT: unsigned char
  {
  CNC_COOLANT_Unknown = 0,
  CNC_COOLANT_Off = 1,
  CNC_COOLANT_On = 2,
  };

  enum CNC_VERSION: unsigned char
  {
  CNC_VERSION_Unknown = 0,
  CNC_VERSION_MK1 = 1,
  CNC_VERSION_MK2 = 2,
  };

  #define CALLCONV __stdcall

  Reminder for the UBS state changes
  empty typedef (__stdcall TStatusCallback) (State CNC_STATUS);

  Reminder of the changes in the status of the drive
  (typedef) empty (__stdcall TDataCallback)
  Code CNC_CODE, //status
  unsigned char bufferFree //amount of free buffers - don't start a new order if it is less than 4
  int numExecuting, number of running command
  keysLimit unsigned char, unsigned char keysJog, //state of the limit and jog buttons
  Put int, int posC, int POSD, int posB //position of the four axes in steps
  unsigned char output);                    Exit status of the controller (flood, mist, axis)

  extern "C" CNC_ERROR CALLCONV (BSTR * result);
  HID
  extern "C" CNC_ERROR CALLCONV HidInitialize();
  extern "C" CNC_ERROR CALLCONV HidFinalize();
  extern "C" BOOL CheckHidInitialized() CALLCONV;
  extern "C" CNC_ERROR CALLCONV GetHidDeviceList(BSTR* deviceList);
  extern "C" CNC_ERROR CALLCONV GetHidDeviceInfo(int vid, int pid, BSTR* vendorName, BSTR* productName, BSTR* serialNumber);
  extern "C" CNC_ERROR CALLCONV GetHidDeviceInfoByName(BSTR device, BSTR* vendorName, BSTR* productName, BSTR* serialNumber);

  Controller of
  extern "C" CNC_ERROR CALLCONV Connect();
  extern "C" CNC_ERROR CALLCONV Disconnect();
  extern "C" BOOL CALLCONV IsConnected();
  extern "C" CNC_ERROR CALLCONV GetDeviceInfoEx(BSTR* vendorName, BSTR* productName,)
  BOOL * crafts, int * serialNumber.
  unsigned char * ver_year, unsigned char * ver_month, unsigned char * ver_day);
  extern "C" CNC_ERROR CALLCONV GetDeviceInfo(BSTR* vendorName, BSTR* productName, BOOL* diy);
  extern "C" CNC_ERROR CALLCONV RegisterStatusCallback(TStatusCallback *statusCallback);
  extern "C" CNC_ERROR CALLCONV RegisterDataCallback(TDataCallback *dataCallback);

  extern "C" CNC_ERROR CALLCONV GetState)
  CNC_CODE * code,.
  char * bufferFree,.
  int * numExecuting,.
  char * keysLimit, char * keysJog,
  int * posA, int * posB, int * posC, int * POSD.
  char * output);
  extern "C" CNC_ERROR CALLCONV SetDeviceParams)
  int axis1StepsPerMM, int axis2StepsPerMM, int axis3StepsPerMM, int axis4StepsPerMM,
  unsigned char axisLimitSwitch,
  Double axis1Backlash, double axis2Backlash, double axis3Backlash, double axis4Backlash.
  Double axis1Accel, double axis2Accel, double axis3Accel, double axis4Accel.
  (double axis1InitSpeed, double axis2InitSpeed, double axis3InitSpeed, double axis4InitSpeed);

  extern "C" CNC_ERROR CALLCONV CmdInfo(int* num);
  extern "C" CNC_ERROR CALLCONV CmdWrite(int* num);
  extern "C" CNC_ERROR CALLCONV CmdMoveAxes(int* num, double posA, double posB, double posC, double posD, double speed, BOOL startAccel, BOOL endAccel);
  extern "C" CNC_ERROR CALLCONV CmdMoveAxesDelta(int* num, double posDeltaA, double posDeltaB, double posDeltaC, double posDeltaD, double speed, BOOL startAccel, BOOL endAccel);
  extern "C" CNC_ERROR CALLCONV CmdPos(int* num, double posA, double posB, double posC, double posD);
  extern "C" CNC_ERROR CALLCONV CmdDwell(int* num, double seconds);
  extern "C" CNC_ERROR CALLCONV CmdEStop(int* num);
  extern "C" CNC_ERROR CALLCONV CmdStop(int* num);
  extern "C" CNC_ERROR CALLCONV CmdPause(int* num);
  extern "C" CNC_ERROR CALLCONV CmdPauseNow(int* num);
  extern "C" CNC_ERROR CALLCONV CmdResume(int* num);
  extern "C" CNC_ERROR CALLCONV CmdResumeNow(int* num);
  extern "C" CNC_ERROR CALLCONV CmdOut(int* num, unsigned char output);
  extern "C" CNC_ERROR CALLCONV CmdOutNow(int* num, unsigned char output);
  extern "C" CNC_ERROR CALLCONV CmdSpindle(int* num, CNC_SPINDLE direction, double speed);
  extern "C" CNC_ERROR CALLCONV CmdSpindleNow(int* num, CNC_SPINDLE direction, double speed);
  extern "C" CNC_ERROR CALLCONV CmdCoolant(int* num, CNC_COOLANT flood, CNC_COOLANT mist);
  extern "C" CNC_ERROR CALLCONV CmdCoolantNow(int* num, CNC_COOLANT flood, CNC_COOLANT mist);
  extern "C" CNC_ERROR CALLCONV CmdNothing(int* num);

  Hello

  Rather than edit the .h file, it is easier to use the dll call function to define exactly what are the arguments, and return the function.

  Thanks for your replies.

  M.

• How to change the read-only, write protect status of files?

  Original title: change the State of the files.

  I have problems deleting files.  I need to know how to change the status of the files: e.g. "read-only, write protect, etc."

  Hi fbanks4,

  1. were you able to remove the files before?

  You can read the following article and try the steps to change the status of the read-only files:

  You cannot view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7

  http://support.Microsoft.com/kb/326549

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to change the colors of the ADF calendar from different suppliers?

  Hello again once I use JDeveloper, 11.1.2.3.0,

  This might be the third question I ask here on this subject, and until now, I didn't get any answer.

  CAN SOMEONE PLEASE PROVIDE AN EXAMPLE OR A TUTORIAL ON HOW TO CHANGE THE COLORS OF THE ADF CALENDAR ITEM?

  Sorry for asking again, but I find it very cool that nobody answers to these questions. Y at - it a bug or nobody knows really how to customize the calendar component?

  Hi user,

  Here a few steps:

  (1) create a bean

  (2) create a variable with the hash table data type, for example:

  private HashMap activityStyles = new HashMap<>, InstanceStyles > ();

  (3) create a method where you load the desired styles, for example:

  public void loadactivityStyles() {}

  try {}

  HashSet setconf = new HashSet();

  HashSet setnoconf = new HashSet();

  HashSet setadm = new HashSet();

  setconf. Add ("STATUS 1");

  setnoconf. Add ("SITUATION 2");

  setadm. Add ("STATUS 3");

  activityStyles.put (setconf, CalendarActivityRamp.getActivityRamp (CalendarActivityRamp.RampKey.GREEN));

  activityStyles.put (setnoconf, CalendarActivityRamp.getActivityRamp (CalendarActivityRamp.RampKey.ORANGE));

  activityStyles.put (setadm, CalendarActivityRamp.getActivityRamp (CalendarActivityRamp.RampKey.BLUE));

  }

  {(4) set the activityStyles variable in the calendar component property "activityStyles = #{myBean.activityStyles"}

  (5) set your field of Tag calendar (located in the Wizard) the field of the VO that contain the values configured in the method (1 STATE, STATE 2, STATE 3, etc.). It allows to to correspond with the activityStyles variable when running.

  (6) run and see the colors.

  Good luck.

  Jhon Carrillo

• How to change Style sheet

  I understand that a Flex to dynamically change the styles is to create several style sheets, and then switch between them.

  How do you do that?

  Alternatively, how do change you a value for a selector style?

  Jerry,

  You can change styles programmically or dyanamically if you like.

  There are a few steps to be implemented.

  1. create your different style sheets and place them in a folder (best practices).

  2. in your browser Flex 'right click' on your style sheets and select "Compiler CSS to SWF" for each of them.

  USAGE EXAMPLE:

  I created a drop down list component and loaded in a collection of static array data provider for

  [Bindable]
  public var acStyles:ArrayCollection = new collection ArrayCollection ([{label: "MaroonStyle", data: "Brown"}, {label: "BlueStyle", data: "blue"}]);

  Then I call this function which is triggered off the coast of the event of 'change' from the drop-down list box.

  private void changeStyles(event:Event):void
  {
  var evtCB:ComboBox = event.currentTarget as ComboBox;
  var stylename:String = evtCB.selectedItem.data;
             
  If (stylename == "blue")
  {
  StyleManager.loadStyleDeclarations('styles/TGStylesAlt.swf',true);
  }
  on the other
  {
  StyleManager.loadStyleDeclarations('styles/TGStyles.swf',true);
  }
  }

  Simple as that.

  Now, of course I you suggested adding a slightly more dynamic situation in the statement "if/else" this encoded version of irreversibly, but should work the same.

  If this helps to mark as answer.

  HTH,

  Kenny Yates

  Post edited by: K.Yates

• How to change the history of the tab to a list instead of thumbnails

  When I open a new tab in Firefox visited the old story will appear as thumbnails. How to change history to a LIST instead

  You can enable or disable the sidebar story power by "view > sidebar > History" or "Ctrl + H" (command-H on Mac)
  There is also a history button in the bar '3' Firefox menu button in the drop-down list with an element to see the sidebar of history.

  The current releases of Firefox have a "Show the sidebars" button in the palette to customize.

  • Firefox '3-bar' menu button > customize
  • View > toolbars > customize