How to choose a system restore pt more than 5 days?
Windows Vista 32, IE 8. I tried to do a restore of the system longer than 5 days. I created a restore point, but when I go to the system restore, it isn't here. I received a notice that the pt of restoration was created successfully. Help, please.
You cannot create a Restore Point today for 5 days; If that's what you mean.
By using the system restore, you can only create a Restore Point for today.
If you mean that the RP was created more than 5 days ago, read this:
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
iPad backup restore take more than two days
WWas of problems with the battery on my iPad Air life. taken at the Genius Bar at Apple Store. they reset and set up to restore a backup, what they did before. After she came back to the top, they said it would take some time to restore because I have a lot of apps, granddaughter, I went home to finish. It was two days ago. When I go in the backup, it says still iPad is restoration. Should I stop & then restore again? Are they redo the apps that have already been restored?
Thank you, Cheryl
Hi cgibson,.
Thank you for using communities Support from Apple.
I see that you are going through a process of restoring iCloud on your iPad, and it takes longer than expected. The speed to iCloud restoring has a couple of factors, including the speed of your wireless network. For more information on why this process can take some time and how to follow the process, please see below:
Restore my device from a backup to iCloud takes a long time
Restoring a backup can take time because of the size of the backup or the speed of Wi - Fi network. For example, iCloud may take about 1 to 4 hours per gigabyte during a restore process.
There are several steps that follow:
- In iOS 8 or later, check the status of the transfer on your device under settings > iCloud > Backup. If the restore process is in progress, the backup setting is gray.
- Make sure that your device is connected to the Internet with reliable WiFi.
- Make sure that your device is plugged into a power outlet.
- Check the Apple progress bar that is displayed during the transfer of a backup.
If you need help, restore your device from a backup to iCloud
Have a good.
-
Since more than 30 days, I upgraded to windows 10 and I would LOVE to go back to windows 7. Have no idea where my product key could be.
http://Windows.Microsoft.com/en-AU/Windows-10/Windows-10-recovery-options
Check if you can restore your PC to factory settings. This reinstall the version of Windows on your PC and remove your files personal, applications and drivers that you have installed, and any changes made to the settings. Go to settings > Update & security > Recovery > reset this PC > start and seek to restore factory settings.
Discussions:
-
How to do a system restore to vista settings factory
Microsoft Vista Edition home premium
6.0.6002 service pack 2 Build 6002It won't let me. I back up the files and restore files only. I clicked on restore advance, which is the configuration and status of backup and restore files, I see if. I don't have a disc. How should I do system restore the original configuration. Step by step guide.Usually, you get 2 options which is recommended to restore and choose a different restore point. I don't get any of those.I do not understand how my other computer (vista) I would like to do system restore to factory settings without using discs and what a custom?Hello
You do not use the Vista System Restore feature to put your computer to the factory settings.
System Restore updates only your computer settings to an earlier date.
How to do a restore to factory settings, ask your computer manufacturer.
You would either find a way to start the process under programs > then the manufacturer of the computer software > look it up it > or you will need to press some keys at startup.
It would be either F10, F11, Alt + F10, etc., depending on the manufacturer.
Ask them how to do it because it's their recovery process.
Or ask them to send you a set of Vista recovery disks to reinstall the operating system.
They should do this for a small fee.
See you soon.
p.s. Save your files as all data will be lost normally when you perform a restore to the factory settings
-
How to do a system restore in Windows 7
Original title: turn on restoration of the system in windows 7 Home Premium, 64-bit edition
Hello
Before posting my question that I searched for information on how to start the system restore of this forum. However, after reading several posts I'm not sure what to do. A post suggests accessing the system of Protection, by selecting a drive and then clicking on configure and selecting one of the options. In this case I'm not sure which one to choose: recovery or C. For the moment I turned on recovery (that was turned off) and chosen for the restoration of the points, but I feel that this can be a problem.
Another answer suggested turning on the shadow copy of Volume in the systems that I did too. Can you please give me step by step instructions on how to run properly on the system restore. Thank you.
Computor properties > System Protection tab to ensure that the Protection is enabled for the primary drives for example C and not driving labeled recovery or tools
-
How can I repair system restore
IM problems using the system restore how can I repair system restore
Hi honey bunch.
· What happens when you use the system restore?
· You receive an error message or error code?
· Why you restore the system?
Additional information on the issue to help us help you.
You can check the link: System Restore: frequently asked questions:http://windows.microsoft.com/en-US/windows-vista/System-Restore-frequently-asked-questions
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Hello I'm in safe mode because it's the only way to get to my desk, it blue screens when I try on a regular basis, how to do a system restore or restart in safe mode?
Hello
Do a restore of the system using the same safe as you would in Normal Mode.
http://bertk.MVPs.org/html/restoresysv.html
http://www.computer-answers.info/maintenance/Vista/How_to_Use_System_Restore.php
See you soon.
-
How to do a system restore with windows 8. my mouse is not working but the keyboard works
How to do a system restore with windows 8. my mouse does not work but the keyboard works.
I've updated some drivers and now my mouse does not work
Press the Windows key and press 'R '. Type "appwiz.cpl" without the quotes in the box run. Use the arrow keys to scroll down for updated drivers. When the driver is highlighted Press 'enter '. Use the arrow keys to select Yes in the uninstall confirmation dialog box. Restart the computer.
You can run the restoration of the system from a command prompt if you are unable to uninstall the drivers. Press the Windows key and 'X', use the arrow keys to select the type of command (Admin) line "rstrui.exe" without the quotes. Use the arrow keys to navigate the windows system restore.
Jim
-
How can I restore Win 7 so I downloaded WIN10 more than 30 days ago
While I was away WIN10 has been installed. I want to restore WIN7, but the installation of 10 was more than 30 days ago
The clean install came already posted in this thread.
Say thanks to 3 days of KenMorley to figure out and a few minutes from CT to repost it as its own here,
It too just in case you're stuck in an update loop, to research
You need to scroll down to the poster of Joel SC is the last answer on this thread.
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-hangs/dbd539c3-bfc6-42DF-a6ff-0e55ef7938eb?page=6 -
Original title: Windows 7 Media Player
How do I know if I have more than one of the same song in my library, and if I do how do I remove it without deleting both copies?
Hello
Duplicates would be revealed by the observation. If found you are probably followed the same
record twice.Add items to the Windows Media Player library - see the monitoring records - and delete a folder
controlled by the player.
http://Windows.Microsoft.com/en-us/Windows7/add-items-to-the-Windows-Media-Player-libraryRemove items from the Windows Media Player library
http://Windows.Microsoft.com/en-us/Windows7/remove-items-from-the-Windows-Media-Player-libraryAdd or edit media information in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows7/add-or-edit-media-information-in-Windows-Media-PlayerThe Windows Media Player library: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-library-frequently-asked-questionsGetting started with Windows Media Player
http://Windows.Microsoft.com/en-us/Windows7/getting-started-with-Windows-Media-Player#section_4--------------------------------------------------------
The library may be corrupted if necessary, after the media library - advanced - restore tools above...
Reset the library will result in the loss of all of the counties of game and probably both sides.================================================================
If you think there is duplicate in separate folders files:
Here are a few utilities to help, be sure to remove duplicates once and good
folder. If If doubt copy the file to another folder, delete and then check WMP.Here are several free utilities and they have all their benefits and their methods.
Auslogics Duplicate File Finder is the MD5 search engine that allows you to find duplicate
files content, without worrying other matching criteria. It would be useful, for example, when two identical
MP3 tracks or video files
have different names
http://www.Auslogics.com/en/software/duplicate-file-FinderEasy Duplicate Finder - find and delete the duplicate - free
http://www.easyduplicatefinder.com/AntiTwin - Installer and Portable versions - search files in double or similar-
same binary - free
http://www.Joerg-Rosenthal.com/en/antitwin/Fast Duplicate File Finder-Free - quickly find all the files in a folder and its subfolders duplicate
http://www.Mindgems.com/products/fast-duplicate-file-Finder/fast-duplicate-file-Finder-about.htmDuplicate File Finder - Smart Port Forwarding - TCP Port Scanner - TCP Tunnel Port-
Multi-minuterie-free
http://www.brooksyounce.com/Duplicate File Finder software (pictures, mp3, iTunes)
http://www.Moleskinsoft.com/SearchMyFiles - free - an alternative to the "Search for files and folders" module standard
Windows. It allows you to easily search files in your system by wildcard, by last modification/creation/last accessed: time, by file attributes, by the content of a file (text or binary search),
and by the size of the file. SearchMyFiles allows you to make a very specific search that cannot be
done with Windows search.
http://www.NirSoft.NET/utils/search_my_files.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Original title: problems using multipoint server 2010.
When we try to use our multipoint system 2010 with more than 2 users mice become uncontrollable and move the screens themselves. How to fix this.
Hi thomasgk,
The issue of Windows Multipoint Server 2010, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.
Hope the helps of information.
-
How is it you can't use more than 126 GB of a 1.5 TB with LabVIEW Real-time hard drive?
How is it you can't use more than 126 GB of a 1.5 TB with LabVIEW Real-time hard drive?
It's only 8.3% of disk space!http://digital.NI.com/public.nsf/allkb/E7E2F5657B6026358625750B007201A6?OpenDocument
The national Instrument is reformat that you drive less than 126 GB or replace the drive with a less than this size.
Please OR tell me you go fix your LabVIEW Real Time soon, and that we will not have to wait for LabVIEW RT 9.2.1 in 2011 for this one to fix.
http://upload.wikimedia.org/Wikipedia/Commons/9/90/Hard_drive_capacity_over_time.svg
Readers as high as 126 GB or more have been around since mid-2002. It's about 7 years now and LabVIEW Real-time STILL cannot use greater than 126 GB drives! Please OR. Do something.
We deserve the patches for older versions of LabVIEW RT. What about updates to LabVIEW RT. As 7.0.2 7.1.2 7.6.2, 8.0.2, 8.2.2, 8.6.2.
We don't need new features or versions of LabVIEW RT as 9.0 until we have some of the bugs fixed in existing versions.
Kevin.
-
Hello
in our society, we have an old domain controller has been disconnected for more than 200 days, probably in a State of thumbstone, it still appears in our network. We wanted to know what is the best way of disused this server, we connect to our network and do normal downgrade process.
How do you decommssion a domain controller that has not been on the network of more than 200 days?
Could you please write me back to my work email or call me on my work phone? Job information are below.
Hello
The business support, you can find forums on TechNet, see the following links:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
How to get Windows 7 to recognize more than 4 GB or 8 GB USB driver for ReadyBoost?
I have a USB stick 8 GB that I used it with Vista for ReadyBoost. Of course Vista only recognized 4 GB for ReadyBoost, but Windows 7 is supposed to recognize more. However, Windows 7 recognizes more than 4 GB stick for ReadyBoost. How can I get Windows & to recognize more than 4 GB for the ReadyBoost.
Hello
You can try to format the disk in the format exFAT? Open computer with the inserted Flash drive. It just right-click on it and select format. The last option, you will see is exFAT and there, use the menu drop down. Select and format the drive using this. Then after it's done, right click on it again and select Properties. You'll see the ReadyBoost tab. Click on it and it will let you know if the device can be used and that therefore to ripped it on.
Regards, ~ Alex T. ~.
~ MVP Windows desktop experience ~ -
Availability of the system, if more than 25 days?
Hello
The parameter 'time' in the call NavigationMovement (dx, dy, status, time) is equal to the number of milliseconds since the device booted up last. However, the value is an int. After my calculations, the value of time is only good if the unit has been running for less than 25 days continuously (see below).
Anyone know what is happening to the value of time once it exceeds 25 days? I came across a bug on my program where things worked very well on my device, but then the call of NavigationMovement behaved badly and I thought it was because my camera was too long. I did a traction battery and things worked properly again.
I won't try to debug this iteratively until my device of permanent test for 25 consecutive days each time.
How can I keep my program works correctly even if the device of the user stays on for more than 25 days in a row?
Thank you
CALCULATION OF time MAX VALUE:
int Max value is 2 ^ 31-1
=> 2147483647 milliseconds
=> 2147483.647 seconds
=> 596,52323 hours
=> 24,8551 days
Two ideas:
1. to work around this problem:
(a) if drop test (iLastSwipeTime > 0).
and
(b) verification (time - iLastSwipeTime) & 0x7FFFFFFF rather than simply (time - iLastSwipeTime).
2. to test, take a look at EventInjector. There are no setTime() for EventInjector.NavigationEvent (at least it is not documented), but both KeyEvent and KeyCodeEvent this (obsolete) method. See if you can use it in your tests.
Maybe you are looking for
-
Hi allmy iPhone more than 6 s don't be stopped when the battery is at 1%. IPhones normally do a stop, when they have no more battery life. The next problem is that the battery is often at the same percentage, while charging. I'm afraid, this Bug woul
-
Where can I find swift taylor the world tour of 1989 on the apple's music?
Taylor Swift - tour 1989
-
Hello I tried to understand how the 'number of samples' and 'rate' controls affect the frequency of sampling for the DAQ hardware. For example, say I want to acquire data from a sensor of pressure at a frequency of 10 Hz intuitively, I would think ev
-
Photosmart C7280 stopped wireless
My Photosmart C7280 has recently stopped working wireless. I have run the tool diagnoses the printer and was able to print when connected by USB, but whenever I try to print wireless, nothing is going on - I have tried two tools (HP Solution Center
-
Director of Windows does not reacknize my mp4 movies
Director of Windows think my mp4 movies soundtracks r how can I fix?