How to choose the right Version of the JDE?

Similar Questions

• HP pavilion 15-e034tx: how to choose the right RAM for laptop

  How to choose the right RAM for my laptop (Pavilion 15-e034tx). I know I should buy DDR3 ram.

  Are there other factors should I consider when buying one? I got 2 slots for ram, which od these combos are possible?

  1-4 + 4 GB
  2-4 GB + 8 GB
  3-8 GB + 8 GB

  Thank you

  From the Manual:

  Two customer accessible/upgradable memory module slots

  Support for dual channel DDR3L (1600 MHz)

  Support 8192 MB RAM system in the following configurations:

  8192 MB (8192 MB × 1, × 4096 MB 2)

  Manual download link

  See page 53 for instructions. Memory access is easy via the service Panel. This is the part number for the approved 4 HP concert module:

  4 GB (PC3L, 12800, 1600 MHz) 691740-001

  http://www.Amazon.com/HP-691740-001-4GB-1600MHz-PC3L-12800/DP/B00CI08FX4/ref=sr_1_2?ie=UTF8 & qid = 1451655870 & SR = 8-2 & Keywords = 691740-001

  A 8 GB module is listed in the manual, and it's a 3rd generation of processor i5 I suspect 2 x 8 = 16 concerts would work, but strictly following the manual your only option is to add a 4 GB for a total of 8. Most users really not more 8 GB and adding a second identical module will allow two-channel operation, so you should see a noticeable jump in the overall performance.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• 4540 proBook s: how to choose the right network driver

  Hello guys. I clean installed Windows 7 Professional. Now, I see that I can not connect my computer to the internet, so I need to install the network drivers. I wen to the HP website and saw that there are 19 different network for my laptop drivers.
  How to choose the right method?

  Hello:

  Below are the links to the ethernet and wireless drivers you need...

  Wireless:

  This package contains the installation package driver for Ralink wireless LAN controllers in the laptop models running a supported operating system.

  File name: sp66089.exe

  This card also needs a bluetooth driver...

  This package contains the OS driver installation package for the Ralink Bluetooth in laptop computers running taken in charge.

  File name: sp59632.exe

  Ethernet:

  This package provides the driver for the Ethernet Realtek controller in the laptop models running a supported operating system.

  File name: sp63213.exe

• FOR ADMINS - how to choose the right answer on a thread on this forum?

  FOR ADMINS - how to choose the right answer on a thread on this forum?

  For example, on:

  "missing plug-in" for safari after you download!

  http://forums.Adobe.com/thread/897677?TSTART=0

  It does not show on 5.1 Safari and Firefox on Mac OS X 10.6.8 6.0.2.

  Thank you!

  The normal user (non-admin type), which can mark a reply as useful or appropriate is the user who started the discussion.

• How to choose the language of the application

  Hello, how to choose the language of the application, I have is Russian, and I want an English version?

  Hello

  Welcome to Adobe Community.

  If you need to install the product in a different language, you can simply launch Creative Cloud Desktop and click on the settings tab in the upper right. On the settings tab, you will find the possibility to click on applications. Once we navigate to apps, you can change the language there.

  

• How to choose the textfield values form and calculate

  Treat all

  Urgent please help

  How to choose the textfield values form and calculate totals. IE when clint fill amount textfield other textfields automatically calculate and display values. I am using uninstall.

  Thanks in advance

  My code is more

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"

  < title > Untitled Document < /title >

  < / head >

  < body >

  < table width = "400" border = "0" align = "center" cellpadding = "0" cellspacing = "0" >

  < tr >

  < td width = "187" align = "right" valign = "middle" class = "KT_th" > < strong >

  < label for = "amount_gbp" > total (GBP): < / label >

  < / strong > < table >

  < td width = "14" height = "30" > < table >

  < td width = "199" height = "30" > < label >

  < input type = "text" name = "textfield" id = "textfield" / >

  < / label > < table >

  < /tr >

  < tr >

  < td align = "right" valign = "middle" class = "KT_th" > < strong >

  < label for = "admin_char_gbp" > Admin amount (GBP): < / label >

  < / strong > < table >

  < height td = "30" > < table >

  < height td = "30" > < label >

  < input type = "text" name = "textfield3" id = "textfield3" / >

  < / label > < table >

  < /tr >

  < tr >

  < td align = "right" valign = "middle" class = "KT_th" > < strong >

  < label for = "agent_char_gbp" > Agent Charges (GBP): < / label >

  < / strong > < table >

  < height td = "30" > < table >

  < height td = "30" > < label >

  < input type = "text" name = "textfield4" id = "textfield4" / >

  < / label > < table >

  < /tr >

  < tr >

  < td align = "right" valign = "middle" class = "KT_th" > < strong >

  < label for = "total_amount_gbp" > amount Total (GBP): < / label >

  < / strong > < table >

  < height td = "30" > < table >

  < height td = "30" > < label >

  < input type = "text" name = "textfield6" id = "textfield6" / >

  < / label > < table >

  < /tr >

  < tr >

  < td align = "right" valign = "middle" class = "KT_th" > < strong >

  < label for = "total_paid_gbp" > Total paid (GBP): < / label >

  < / strong > < table >

  < height td = "30" > < table >

  < height td = "30" > < label >

  < input type = "text" name = "textfield7" id = "textfield7" / >

  < / label > < table >

  < /tr >

  < tr >

  < td align = "right" valign = "middle" class = "KT_th" > < strong >

  < label for = "balance_gbp" > balance (GBP): < / label >

  < / strong > < table >

  < height td = "30" > < table >

  < height td = "30" > < label >

  < input type = "text" name = "textfield8" id = "textfield8" / >

  < / label > < table >

  < /tr >

  < /table >

  < / body >

  < / html >

  Here´s a pointer which will show you how to set the calculation within a javascript function: dynamically calculate the sum of the fields

  See you soon,.

  Günter

• How to choose the display by default when you use two screens on my Mac Pro?

  How to choose the display by default when you use two screens on my Mac Pro?

  The default view when you have several is made that you drag the little icon in the menu bar in this pane:

  

  .

• When you export (share) a project, how to choose the thumbnail of the freeze frame which restores the clip?

  I just shared (exported) a project that is a simple take a clip for a friend who has downloaded on its website. The problem is that, when the video ends by playing on his site, he returned to a freeze frame that seems completely random and is not the image I want. How to choose the exact image that the video will return as "thumbnail by default?"

  Thank you

  Kevin

  Cannot set lla at the FCC. Many layout site Web apps will allow you to set the poster frame for the video files.

• How to choose the download location? download automatically to the users in c drive folder. I want to change it... Please help me...

  How to choose the download location? download automatically to the users in c drive folder... I want to change my office... Please help me out...

  Tools-> Options-> save-> click on the Browse button and find the folder where you want to save the files.

• How to choose the slot one of the two bunk?

  How to choose the slot one of the two bunk?

  Select the two points to cross the selection with the open selection tool, and then clear the high point on the page by holding shift and clicking on it.

  or vice versa. Select the high point of the page first and then select now shift. the high point of the page désélectionnera.

• How to choose the value of a string are numeric together and words of letters (for example, TEST)

  Hi all

  How to choose the value of a string are letters (for example, TEST) and all numeric...

  for example
  TEST 123456
  TEST 34567
  123456 ABCD
  1234 TEST
  TESTING 12345
  TEST 1@234$
  YOUR T 123456

  I want the results of the query as below.
  TEST 123456
  TEST 34567

  And I tried to use regexp_like in this case but without success. See the code below.
  SELECT * FROM TABLE WHERE regexp_like (Description, ' [TEST] % & [[: digit:]] + $');

  How can I do this, please answer.

  Thank you

  WF

  If you want to return only the rows that contain the string 'TEST', followed by zero or more space characters, followed by one or more digits?

  How about this:

  SELECT *.

  FROM my_table

  WHERE REGEXP_LIKE(description,'^TEST\s*\d+$')

• How to choose the scheme of work of a different database instead of the database target

  Hi everyone, can you please answer to my problem.
  
  Q1.is it is mandatory that the two target schema schema and work must present in a database.if not then How to choose the scheme of work of another data base instead of target database schema. Please suggest.
  
  __Description__
  
  My work, my work patterns in odi's in a database schema and target in a different database,
  Now I'm dataserver with identification of the target or credentials of scheme work information.
  Here's the problem.
  
  I can't see scheme of work in the drop-down list when you create the physical schema with data server with the credentials of the target.
  
  It's obvious that he cannot show the workschema which presents in an another database.because - database server has the schema of the target database credentials.
  
  Vice versa
  
  Please suggest
  
  Concerning
  Chantal

  Hello

  Your KM will create the tables for working in the schema, you write to and that's why you have the problem:

  create table< %="odiRef.getTable" ("l",="" "int_name",="" "w")="" %="">

  I don't know of an option to replace this 'W' that will say 'go and get work in the staging area, I've specified.

  I guess that you can customize the KM and pass all the commands to Execute on the Source tab, or I guess you could specify the schema for each of the steps to be the logic diagram of the various staging areas.

  BUT I don't know if it would work throughout and I think it will create a massive Mount of work unnecessarily.

  Is there a decent reason why you can not have the staging area on the target?

• How to choose the right version of publishing app when you choose to change the image of in InDesign?

  Hi all

  Normally when I want to edit a picture that is in a page layout in InDesign either, I press option-click on the image, or ctrl-click on the image and choose to edit using the CC of Photoshop, Illustrator CC or another app I need to use at any specific time. Well, I also have backups will only backup my entire system and so all my applications get saved as well.

  Well, what's happening now (for today) is that when I choose to edit the image, it is opening Photoshop (or Illustrator, etc) from my drive backup and not within the app on my main drive. So, even though I already have Photoshop open as I work in InDesign, when I try to edit an image it will open the copy of BACKUP of Photoshop AS well I tried to choose 'other' when ctrl-click on the image and choosing to Ed... but when I navigate to the here where Photoshop is on my main drive, I can't choose the main application because it appears to show the main application of Photoshop as a folder with the that there is content packaging.

  How the hell can I fix the path to the correct version of Photoshop, where I need to do the editing? I must now go to things a way hijacked by browsing up to where the image is in the finder (via ctrl-click on the link of the image in the LINKS Panel and choose "show in finder"), but it takes twice longer :((, it wouldn't be so bad if I didn't have as many images as I work with that I'm doing now.

  Any help or advice will be appreciated :))

  Thank you kindly,

  Christine

  Just guessing...

  The problem is if Photoshop CC on the primary drive is open? If this is not the case, consider set to open at the start of the computer. The current instance might prevail over those inactive.

  Usually, the installed in last instance of an application is the one linking operating systems (OS X & Windows) with a document file that calls for the application, for example, by double clicking in Finder/Explorer. It is common to see the new version called (say CC Photoshop rather than Photoshop CS 6) because the new version is usually the last installed. Because Adobe CS applications typically install new versions of common files, it is recommended to install releases in chronological order, if it is necessary to reinstall the applications when there are multiple instances on the same computer. For example, to install Photoshop CS4, and CS5 and CS6; If an earlier version is installed when a newer version is present, the previous common files can cause application problems. One consequence of this is normal, but sometimes annoying, behavior that at the launch of an application by throwing one of his files, the new version is open because this is the functioning of the operating system.

  In your case, it is possible that the operating system sees Photoshop of the backup drive installation the new installation and lance. Perhaps to save Photoshop CC makes this instance appear most recent for the operating system. Remember to leave Photoshop CC out of the backup operation. If it works well! If this isn't the case, you may try to start the computer from the backup disk, run Photoshop, then exit and restart the computer from the main drive. If this solves the problem, maybe try to start from the backup disk, then reinstall Photoshop top and then restarting the main player. If it works, it can "keep", or an operation like backup, could reduce to naught all your smart stuff.

  Maybe one of these strategies may be a permanent solution.

  HTH

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

• How to choose the right project settings?

  I am new in taking video and modifying them. I bought a Sanyo Xacti HD camcorder and a lot of clips in my last trip. The clips are transferred to my count and have the format. Depth of MP4 1280 - 720 1280 and 29.97 frames per second.

  I want to create after having been released on DVD I can show on my TV 16:9 (PAL Netherlands)

  When I create a new project, I choose the seetings and I don't really know how to choose!

  Should what project settings I choose in the settings I see that 30 fps under NTSC systems. Is there somewhere a general explanation how?

  Help will be very appreciated!

  Greetings Willem

  Before the NTSC in PAL, I think that there are other major considerations.

  1. you save the 16:9 720 p 30 1280 x 720 at 30 frames per second, using the MPEG-AVC/H.264 codec). Seems to me you are dealing with what they call "AVCHD Lite". If so, there are major problems of basic editing in first Elements 7. See the FAQ of Steve Grisetti

  http://forums.Adobe.com/thread/454585?TSTART=0

  2. your comments suggest that you want to create the widescree of DVD-VIDEO (16:9) of your timeline.

  3. so, first and foremost, I would determine if you can successfully bring your video in Elements 7 first and export the DVD-VIDEO in NTSC system, before thinking on the conversion of a video NTSC a PAL end product.

  4. as a general rule, you select the preset of the project (new project dialog box) to match the properties of your video. Once done this will not stop you changing predefined export later. In the case of your NTSC by Sanyo 720p30 video, I suggest the project (new project dialogue box) = NTSC HDV HDV 720p30 preset. Think the project defined by default as a template from which you can edit your video. Although this 720 p is a variant of AVCHD, I would suggest the HDV category since there is no preset under AVCHD 720 p. Note that the descriptions on the right which you have set the preset.

  5. in Share/disc/disc, in the dialog box burn, and then select the preset: NTSC_Widecreen_Dolby DVD. If it's all completed successfully, then we can talk about conversion of NTSC 1280 x 720 16:9 for a DVD VIDEO PAL (720 x 576 25 fps with a flag from 16:9 to stretch the video on screen after the encoding).

  6. you can find the following link helpful:

  http://www.Camcorderinfo.com/content/article_converting_ntsc_pal.htm

  RTA

• How to choose the right photo-album

  I want to use pictures for my video. I have four different albums. FCP X shows pictures of the only album (and not the good).

  What should I do to choose the good album (and photos)?

  In Photos-> preferences, click on use as Photo library system.

• How to choose the elements that are copied when using a custom template?

  Hello

  As the title, how to choose whether or not an element is copied into a new project when the project is created from a custom template?

  I recently created a custom template by following these instructions, as had recommended after my last question on the forums:

  Click

  The template was created so that I can create several versions of a broad program of LabVIEW with unique names (using the prefix in the project options). It works fine except that some things are not copied into the new project, even if they are part of the model. The most important point of "disappeared" is for runtime menu (which is a RTM file). Does anyone know why this might be missing? And how to make sure, it is included in the future?

  Thanks for any help.

  OK, here is the custom script VI (saved in LabVIEW 2012) and XML update that should fix your test project. You can take a look at how I implemented XML and script VI, then make the changes applicable to your current project.

  1. use the attached file to MenuTest.xml for your meta data. Note the new sections CustomVIMode and CustomVIPath .

  2 create a folder next to your .lvproj of the source script and place the PostCopyScripting.vi in there.

  Once you have done so, your MenuTestProject should be copied on properly... the GTR will be present in the new Bachelor of LAW, it will have a correct prefix (if specified), and it will be the correct link to the VI.

  I would like to know if you have any other questions or problems.