Presentation causing Sierra to Crash and disconnection

Similar Questions

• Interface user Loader causing Flash to crash and close

  Hello everyone, The Kraken here
  
  I have a problem and was hoping for a glimpse.
  
  In the prosess of the creation of a Web site I came across a question that left me speechless!
  
  I created a 'swf file "to load in one of my pages using the loading of the UI component. The "swf" file exists in the same directory as the index file that is the Web site.
  
  In the component settings, the only thing I changed was resizing to 'false' and the source that I entered "services.swf" which is the "swf" it takes to load.
  
  The Web site loads very well to the home page, but when I try to click on the services button to load th services Flash page stops every time.
  
  I did a new empty AS3 file to test the "swf" file using the charger of the user interface and it works very well, but not in my Web site.
  
  If anyone has any ideas where I can start to diagnose this problem it would be appreciated.
  
  Yours in FLASH
  The Kraken
  

  I noticed a flash document can be damaged at the strangest times and give more strange results. You said that you have tested with an empty file and it worked, but not with your Web site. Your main flash document is possibly corrupt. Try to copy all images on your timeline and paste it into a new document. Most probably, you will have to clean up some of the frameworks if all have not extended until the end of the timeline. Copy the timeline to a new doc has solved problems for me before when I had trouble-shooted everything.

  You get the same results of test on a web server?

• Finder crashing and causing repeatedly crashes on Macbook Pro

  I use a Macbook Pro retina 15 "and using OS X El Capitan, verion 10.11.5.

  After a recent transfer of photos from my iPhone to iPhoto, to close iPhoto, the icon Finder keeps 'jump' the top down and the same error repeatedly, showing in the dialog in the middle of the screen (it flashes until disappears, flashes up, disappears several times without end):

  

  It is not possible to click on one of the options in the dialog box. This caused other problems now. If I open all the Apps then they crash instantly, or open for about 10-15 seconds before crashing and flashing error up to 'preferences system closed unexpectedly' report etc. Non-Apple apps (for example MS Word/Powerpoint) survive longer opening. If I try to open system preferences or the System State and then they all have two crash as well. So basically, other than documents such as PDFs or pictures, everything I opened crashes a few seconds to open. I restarted the Mac - regular options still appear to stop down and restart by pressing the power button. I tried the tips on other forums, but the steps they describe require opening applications or programs that simply plant when I opened (e.g. try opening the Terminal).

  If I briefly to open an App and then reappear items on my desktop. If there is no apps temporarily only open then the contents of the Office disappears.

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• When you try to open some sites Web my computer crashes and I get a message "a problem caused this program blocking interact with windows.

  Hello

  From time to time, I'm having a problem with internet access - when, finally, access is allowed and trying to open some websides my computer crashes and I get a message "a problem caused this program blocking interact with windows ' why?
  I'm not technically capable, but I did I tried different ways-nothing doesn't. I want to talk about Windows 7 Edition home premium.
  At the same time, there is no problem on my laptop which runs under Win XP and with the same internet provider! Any suggestion will be appreciated

  Original title: problems with Win7 and MozillaFirefox

  Hi Ulica,

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, it looks like you are facing an Internet problem on the Windows 7 operating system.

  It would be great if you can answer these questions to help you further.

  1. is the question confined with Mozilla Firefox?

  2 are you able to access the same Web site using Internet Explorer?

  3. have you made changes on the computer before this problem?

  4 are you facing this problem while accessing the secure Web site?

  Problem with Internet Explorer, I would suggest trying the following methods and check.

  Method 1:

  I suggest you add this particular website as a trusted site and check.

  To add a Web site to a security zone: http://windows.microsoft.com/en-US/windows7/Security-zones-adding-or-removing-websites

  Method 2:

  I suggest you to see the steps in the following Microsoft article and check.

  Can't access some Web sites in Internet Explorer: http://support.microsoft.com/kb/967897

  You cannot connect to or connect to secure in Internet Explorer Web sites: http://support.microsoft.com/kb/813444

  Why can't I view some websites? http://Windows.Microsoft.com/en-in/Windows7/why-cant-I-view-some-websites

  Note: There are rather than Internet Explorer 9 as well.

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 3:

  Internet Explorer not responding, stops working, or restarts: http://support.microsoft.com/gp/PC_IE_EnvManualID

  Note: If the question is limited only with Mozilla Firefox, I suggest you to post the same question in the Mozilla Firefox's Support Forums.

  http://support.Mozilla.org/en-us/questions

  Hope that the information provided is useful.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• J K L shuttle keys causing Premiere Pro to crash and stop. Someone having this same problem?

  J K L shuttle keys causing Premiere Pro to crash and stop. Someone having this same problem?

  Hi Abraham,.

  Sorry for this question.

  Changing the audio channel seems to be the cause of my problems. I have change audio channels on the video for my project it to appear on my preview window use J K L to Polish thru and it hangs and stop.

  This looks like a problem that we know. You can avoid collisions by turning off 2 Audio Preferences:

  • Maintain the pitch audio when the shuttle
  • Outputs multi-channel sum to Mono in the Source monitor

  See if your situation improves after the deactivation of these preferences.

  Thank you
  Kevin

• App stack (Toad for Oracle) cause VM to black screen and disconnect?

  When we attribute our Toad for Oracle (12.6.0.53) stack, the user will receive see the connected virtual computer, but before I get into the office will get a black screen and disconnect.

  Now, if not assigned, the user can open very well.  When we assign the battery, apply immediately, the app looks and works completely fine.  So the app itself isn't a problem, but something that happens when you try to attach to what is.  How do I investigate what happens?

  Then I temporarily mounted a 2.5.0 environment and recreated the Toad for Oracle stack with the 2.5.0 release model.  And Yes, it works!  I imported the battery in my 2.5.2 environment and it is attached to the connection of the user without any problem of disconnection.  I think that this remark made in the SR as well.

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• Firefox crashed and since she came back to the top it does not find the internet.

  Firefox has crashed in the middle of the navigation. I rebooted, but he wasn't able to find my internet connection. My internet connection is in place; other computers in the House connect fine and IE and Chrome on the computer in question have no problem either. I uninstalled, downloaded a new facility and reinstalled but it may not always connect. Error message is "unable to connect. Firefox can't establish a connection to the server < all sites >. »

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• When you click on a photo on facebook that loads the new popup, Firefox crashes 10 androgenic. Just Firefox crashes and unresponsive. Is there any solution for this?

  When you click a picture that load the popup that Facebook has recently presented on the occasion of just Firefox crashes and unresponsive and them must be closed using the Manager tasks. It does not occur every time say for every 2 of 10.

  That's what the error report says...

  Description:

   A problem caused this program to stop interacting with Windows.
  

  Signature of the problem:

   Problem Event Name:	AppHangB1
   Application Name:	firefox.exe
   Application Version:	10.0.0.4411
   Application Timestamp:	4f2548ce
   Hang Signature:	4813
   Hang Type:	0
   OS Version:	6.1.7601.2.1.0.256.48
   Locale ID:	2057
   Additional Hang Signature 1:	4813d58d219b01045ae1404b21f04466
   Additional Hang Signature 2:	ec05
   Additional Hang Signature 3:	ec057c79f467a3033cec4ebe11500204
   Additional Hang Signature 4:	4813
   Additional Hang Signature 5:	4813d58d219b01045ae1404b21f04466
   Additional Hang Signature 6:	ec05
   Additional Hang Signature 7:	ec057c79f467a3033cec4ebe11500204
  

  • Firefox plant - troubleshoot and prevent assistance fixing crashes
  • Firefox crashes or does not - how to fix

  If Firefox crashed, then please provide Crash ID here.

• Am curious to know why XP Pro crashed and reinstall the will does not activate

  Have a system that ran XP Pro for a couple of years without problem. Software and license (product key) was purchased online, downloaded and burned to CD. Once installed, OS signals like SP3 XP Pro Version 2002. First installation and activation years was fine. Reinstalling/reactivating later a year later due to a failure of the drive was fine. System had presented a Genuine Advantage test and been patched now with no problems. Last week we had errors saying the OS was not authentic and we could be a victim of a counterfeit. System crashed and when restarting it gets to the login screen, but if the connection is attempted the desktop and in a minute or 2 the system restarts and goes in a loop of reboot, never load the new OS. Start in safe mode gets through the initial steps, but after the start of files loading the system restarts and loops. No configuration of the software/hardware/don't change in recent months and no unusual entry in case do not connect up to 2 days before the accident. No indication of hardware problem and no cases of virus or malware of MS Security Essentials. I tried repair OS, no help. Now have wiped the hard drive and tried to reinstall the operating system (computer, no change) and it will reinstall correctly by using the original product key, but will not activate. Reports as not a valid product key. Activation of the phone I tried and it will activate not there either; reports as invalid product. Considered we could have actually gotten pirated OS, but I'm puzzled why, if the software was fake, the system would work very well for if long including product activation earlier and passes test Genuine Advantage, then suddenly crash, cause errors 'potential infringement' and do not allow for reactivation. Thought at some point, the system has had virus/malware issue, but this does not explain why the relocation after the failure of the drive fails to activate. System critical to the needs of companies and has been replaced so no urgency to correct but I'm very curious to know what might happen. Comments or suggestions would be welcome. Thank you!!

  I checked the key used, and here's the information that my tool tells me about the key:
  (1) version of Windows XP Pro MSDN
  (2) is blocked Activation (reason: abuse)
  (3) no Validation blocked
  (4) shows no sign that it is a basic time license (TBL)
  (5) 31 attempts to activation
  (6) 17 total Activations
  (7) first activation on 2010-08-03
  (7) last Activation successful 13/04/2010
  (8) date of the first activation has been blocked 13/01/2011 (note: this is not necessarily the day, the block has been applied, just the first attempt of activation which is refused due to the block)

  It is d ' attribute of strangeness between this key and "information" which include the Genuine Advantage you said.

  First of all, it's a MSDN license which means that someone can not use the key unless you have an MSDN subscription.

  Then, the key is blocked but not blocked Activation Validation.  It's unusual because usually, if an MSDN key is proved have been hacked (sold outside it's allowed) would be blocked the key activation and Validation.

  In this particular case, it seems that the key has been blocked because of too many activations Activation (on computers with different hardware ID, which usually means different computers) in a short period of time.

  As for the key being a limited time license, which makes no sense.
  (1) I don't see that a MSDN key would be time limited.
  (2) if the key has been blocked due to it having expired, then the reason for the block would be expired are not abusing.
  (3) the key was first activated in March 2010 and the person you talked to said that the key expired a week (i.e. 2011) there. Limited time Licenses are generally used to try before you buy things and I don't know any license based on the time that a period of over one year (16 months to be exact).

  I am convinced that the person that you talked to was wrong that this key was a limited time license.

  My assessment of the information I have available suggests that the key was actually blocked in 2010 due to excessive activation in a short period of time.  I say this because, shows the history of activation:
  (1) first activation in 08/03/2010
  (2) last activation successful 13/04/2010
  (3) 17 total Activations

  This shows that the key has been used 17 times, on 16 different computers, in a little over a period of a month. This does not seem excessive. and strongly suggests that the key has been blocked for this reason, in April 2010. You just didn't notice the block until the end of 2011.

  However, even if the current issue was caused probably by a number excessive activations (which can be fixed by asking that the key be unlocked) the real problem comes from the fact that the key is a licensed MSDN.  The permits required that any key from an MSDN subscription (what to do with all the MSDN keys) can be used by the owner of the MSDN subscription. If you do not have the MSDN subscription that come from this key, you are not allowed to use this key.

  Thank you
  Darin

• I tried a number of times to upgrade to windows 10. I get c1900101 - 4000D as a mistake. Once, my entire hard drive crashed and I had to reinstall Windows 7.

  I tried a number of times to upgrade to windows 10. I get c1900101 - 4000D as a mistake. Once, my entire hard drive crashed and I had to reinstall Windows 7. I am also having a problem installing Adobe Flash player. It is said that API-MS-Win-Core-Registery-l1-1-0.dll is missing but I don't know what it is. Any suggestions?

  "Configuration settings" is the final phase and fault codes look like c1900101 x400xx. The most common failure here is 40017, which means we could not start. Since this is the first time start us Windows 10 with all the drivers in place, once again, drivers are usually the cause of the accident. These issues tend to be less transient than the 30018 s, then a second test is less likely to solve the problem. Yet, it never hurts to try.

  Try to upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

  If the problem persists, try the upgrade manually, but choose the option to keep personal files only, you will have to reinstall applications.

• YouTube (720 HD or full screen) causes Firefox to crash

  Play YouTube videos 720HD or full screen mode causes immediate Firefox crash. I tried Safe Mode and the same things cause Firefox to crash. I went through the steps on the support page of Mozilla to try to resolve the accident, and none of the steps he solved the problem of crash with YouTube. Angieslist.com has recently caused a Firefox crash.

  BP-a7e72522-c91b-4186-A540-1e92e2150731

  It seems that the problem of crash has been resolved with version 40.0.

• Hi, I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair o

  Hello

  I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair the permissions. I also used the Ctrl + C and CTRL-Z commands in the Terminal to leave the alfred_script, but nothing helped. I'm running out of ideas here, so I hope you could help me either reinstall the mail.app. I could always just switch to a different mail application, but it's kind of a last resort.

  Code:

  Tell application "Mail".

  Define allAccounts on each account name

  Repeat with currAccount in allAccounts

  the unreadMboxes value (each mailbox to the account currAccount the unread number is not 0)

  Repeat with currMbox in unreadMboxes

  (read status of each message to currMbox including the playback State is set to false) true value

  end repeat

  end repeat

  tell the end

  Any input would be greatly appreciated. Can post the report of crash on demand.

  Not sure that Alfred's, but it's just an Applescript script and it would not cause Mail to be planted.

  However, when running through all the messages, it is possible Mail database has been corrupted and it crashes because of this.

  I'll probably get anything out of the accident report, but others might.

  My first instinct would be to rebuild the mailbox. Because you can't do that with him crashing, you can simply delete the databases and it will rebuild them.

  Navigate to this folder:

  ~/Library/Mail/v3/MailData/

  You can either manually through the files, or copy the full path and paste it into go the folder in the menu go to the Finder.

  Remove the envelope Index files. Open Mail and see if it works well.

  If your library does not appear in your folder, hold down the Option key and select library in the menu go to in the Finder.

• M400 screen/computer crashes and the fan is palpable... reboot is the only option

  Randomly my [Toshiba Portege M400-S5032 | http://reviews.cnet.com/laptops/toshiba-portege-m400-s5032/4505-3121_7-32329282.html] crashes and the fan starts running fast. [Cnt-Alt-Del does not work and the only way out is pressed the power button until there is a shut down | http://forum.notebookreview.com/toshiba/224709-toshiba-u205-lock-up-problem.html#post3454972]. Increases the frequency of this problem as the age of the laptop. I opened the computer to make sure that there is no dust or debris inside and I [removed the stickers from the bottom of the laptop | http://cxliv.org/2008/06/09/toshiba_u205-s5034_lock-up_problem.php] or less perforated holes in the stickers. [Other people have the same problem | http://reviews.cnet.com/laptops/toshiba-portege-m400/4864-3121_7-31729265-7.html?tag=userReviews;summaryList]. Some [think that Frost is caused by movement | http://www.fixya.com/support/t2758501-machine_freezes_up_needs_hard_boot], but [others think that it is only because software | http://laptopforums.toshiba.com/t5/General-Technology/Portege-M400-Problems/td-p/24729].

  * Does anyone have a solution? *

  Hello

  What version of BIOS your M400 installed?

  Test the RAM for problems using the Memtest CD of www.memtest.org

  And update the drivers (fingerprints, display, sound etc...).

• Satellite A500 - crashes and restarts when I play games

  Help, please

  For these last months, I had a problem with my laptop crashing and restarting in 10-20 minutes from a game.

  Please help, give me ideas or tell me how to find out what the problem is, I have read a few other discussions to talk about questions of heat but no real answer on how to solve the problem.

  Help, please
  Thank you
  D

  Hi Dale.Johnston,

  Overheating would be a typical pattern of this behavior. I mean, that's if the laptop has a higher internal temperature and it will immediately fit to protect the equipment. Then it the normal behavior of s from overheating.

  Overheating may have different reasons. In most cases it's dust that blocks the fan. This would mean that you have to clean the cooling system of your laptop using the jet of compressed air to blow the dust from the cooling fans.

  Generally, it should help. If this isn't the case, I would check the display driver. What display driver and operating system you are using?
  If you install the display driver Toshiba not they can also cause overheating if it recommendable s using Toshiba pretested drivers only. ;)