How to clean an iPhone 5 via USB

Similar Questions

• How to clean an iphone 4

  How do I "clean up" an iphone 4, I want to give the child to may. Do not remember the code with restricted access. I want it to be like a new phone, so she doesn't have my contact, notes, bookmarks, calendar, etc.

  Help, please

  Thank you

  Try what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• How to clean my iphone 4 before parting with it

  What are the steps of cleaning on an iphone 4 before separating from her.

  What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• How to access a printer connected via USB on an operating system Vista (Dell desktop) to a (portable) Windows 7 operating system

  There is a slavd for Dell 926 printer via the USB port of a computer Dell under Vista SP2.  I use a Dell Studio 15 laptop and trying to network two computers so that we can share the printer enslaved.  I tried several times to do so via homegroup.  The Vista computer sees the mobile network, but I can't do the printer share properly.  All answers there?

  Hello

  Collective housing is for Windows 7 computers to network with other Windows 7 computers.

  http://Windows.Microsoft.com/en-us/Windows7/help/HomeGroup-from-start-to-finish

  If you want to share files and printers with computers running earlier versions of Windows, see networking of computers running different Windows versions.

  See you soon.

• How blackBerry Smartphones at NO charge via USB each time connect to PC

  Hi, I'm not sure if it's a good idea to always load BB when connecting to the PC.   Therefore, I'm trying to find an option, do NOT charge the battery when connecting in the hope that it will extend the life of the battery.   How to proceed, please...

  Thank you very much in advance.

  There is not a way. Good load and overflow of these Li-ion batteries.

  Drain the battery whenever it is bad.

  Here's some good advice from loading, please read and you will see that many of them will be applicable to you.
  http://www.blackberrynews.com/2008/05/20/battery-use-tips-for-your-maximum-battery-life/
  And here: http://supportforums.blackberry.com/t5/BlackBerry-Community-Post/Power-Saving-Tips-for-your-BlackBer...

• How to import photos from an iOS device photos via USB?

  I import my photos of iPhone & iPad via USB for pictures on my Mac.

  I turned off the option to automatically open Photo when I plug my iPhone to Mac, because in most cases, I don't want to import Photos (for example just recharge the phone via the USB port).

  But now I can not get an option to import my photos.

  I read the help pages, but can't find the answer because it suggests options should open when the USB key is inserted, but the screen remains the same

  What should I do?

  Have you tried the following:

  • Launch Photos manually once you connect your iPhone to the Mac.
  • Enter the ⌥⌘S (command-option-S) key combination to make the sidebar visible on the Photos.
  • Click on the camera icon or an iPhone in the sidebar when it appears.

  Your iPhone shows in iTunes or in the Image Capture? If iPhone doesn't appear at all, make sure it is properly loaded and unlocked, disconnecting, take a new photo, then reconnect it.

  • Start iTunes and confirm that you agree with the mac, the prompt on the iPhone.
  • Try a different USB port.
  • Try to force reboot the iPhone.

• How is used to find the mac address of my ipod and iPhone which is attached via USB windows 7

  Deployment of several hundred iPods and iPhones and need to conclude the names MAC and device Cisco ACS.

  Wondering how to find the MAC when the device is connected via USB to a Win 7 box so we can cut and paste the name of MAC and device in the Cisco app to avoid typos.  Thank you

  Hello

  Thank you for keeping us posted.

  I wish that post you your request here-

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Also try posting your query in the communities of Apple as well-

  https://discussions.Apple.com/index.jspa

  Back to us for any issues related to Windows in the future. We will be happy to help you.

• How to recover the administrator password in windows 7 via USB

  I have a HP netbook mini and need to how do to recover the administrator password in windows 7 via USB that we forgot and had to load itunes from another Iphone.

  Hello

  You can use a utility to reset as in the free sample on the link below - using another PC, this can be created on a usb flash drive.

  http://pogostick.NET/~PNH/ntpasswd/

  Kind regards

  DP - K

• iPhone 5 c will not charge via USB on the laptop?

  Hi all.

  I have an iPhone 5 c and as about a week ago, does not charge via the USB port on my laptop. He sees very well in my wall sockets and Sockets USB as well, but not in my laptop. I have an Acer laptop running Windows 7. Windows is up to date, iTunes has the latest version installed. Whenever I plug in my phone, one of the following conditions occurs:

  (1) does not have

  (2) noise "plugged" USB lights, the window on the lower right, tell that a USB device has malfunctioned

  (3) (rarely) of phone calls after I tried several things

  What happened is I would plug my phone, she would charge via USB, iTunes opens automatically, and "trust to this computer" popup would come on my phone if I had unlocked it. None of this is happening now. I did the following to try to remedy:

  (1) power cord iPhone replaced (it was time for a new anyway)

  (2) uninstalled and reinstalled iTunes

  (3) restart computer and phone probably 29856 times

  (4) device Manager... nothing comes up at all, not even the unknown device. RARELY the unknown device comes up, then I get a "Code 10: this device cannot start" error, but it is * in a handbasket just trying to get to THIS point! and IF I do what they say to do to correct a code 10 (uninstall all USB and restart the computer, then USB devices hook to the top one at a time), so I'm now at my problem of a communication that don't meet pluse between my phone and PC

  5) tried to the registry editor, but not "upper filters" option rises

  (6) virtually every other option on this thread of 5 pages iphone not recognized by Windows 7

  Help, please?

  The USB port of your laptop does not provide sufficient power to recharge the phone. It is a hardware problem with your laptop, not the phone.

• How attached iPhone off to USB host for charing only

  How attached iPhone off to USB host for charing only

  How attached a motorized iPhone to USB plug for battery charing

  without the phone starts in normal mode? The phone should simply keep turned off

  and only switch to the mode of charing on its data cable plug-in / original accessory load to the USB host.

  iPhone 6 s.

  You cannot charge an iPhone if it is turned off, because the charger is implemented on the software, which must be supplied to do its job. However, if you plug first, then turn to it it keep the charging circuit on and off the rest of the phone.

• How to install Windows XP on my NetBook via USB

  Can you tell me how to install Windows XP on my NetBook via USB as there is no CD to my Samsung N100 NetBook?

  Go to the Samsung's Web Site, click on the "Support" link and find/download a manual for your computer.  Somewhere in the manual (sometimes in the appendix) the procedure of installing Windows XP on your model will be explained.  However, having said all that, my bet on the response from Richard Harper and you will probably have to you beg/borrow/steal/buy an external USB CD-ROM drive.

  HTH,
  JW

• the iPhone via USB cable connection does not work. Error code 37 - cannot initialize the connection. Sombody has a solution? Thank you.

  See statement above. connect iPhone via USB cable. Error Code 37 - cannot initialize the connection.

  Ah, a famous Apple error. See: http://support.apple.com/kb/ts1275 and http://support.apple.com/kb/TS3125

• Slate 10 - how to tie the compact card reader via USB flash

  I'm new to tablets but I was hoping that I could upload photos of my card compact flash via USB.

  The cable supplied with the pieces of card in a USB male reader, so I bought a USB female / male micro USB cable to connect to the tablet.

  Unfortunately the Tablet does not seem to recognize that any device is connected.

  Do I need a special software or a driver device or just advice?

  Thanks for any help.

  Hello and welcome to the HP support community!

  Unfortunately, the 10 HD Slate has no circuits to do what you're trying.  I'm sorry.  :-(

  The Tablet has a slot for micro-SD card.  If you can locate a Compact Flash adapter sleeve that holds a micro SD card, it would be a direct solution.

  Other workaround solutions using a computer as a man in the middle and the transfer can be made via cable or wifi.  Cloud storage is another thought.

  WyreNut

• How can I connect my Kindle Fire to my PC via USB?

  I try to connect my Kindle fire with a USB port on my computer, and it says that the device driver cannot be detected, what can I do?

  When connecting the Kindle to the computer via USB, the computer sees the Kindle as it does with a flash drive.  This allows you to copy things and from the Kindle.  For example if you have a lot of MP3 files, you can use the connection to copy them into the folder of music on the Kindle.  If you have downloaded things from sites other than Amazon, you can use this connection to back up your computer.  Of course everything that you download on Amazon, you don't have to save because Amazon their backs until their cloud automatically.

  I hope this helps.  Good luck.

• photos do not sync via USB

  I want to synchronize my photos from my iPhone 5 for my iMac via USB, so I can remove them from my camera.  When I connect my iPhone, it seems pictures is not recognize.  It used to open and ask if I wanted my pictures deleted once they have been synchronized, but it is no longer made it automatically.  The last time, I stumbled upon a way to make it work, but I don't remember what I was doing, and I'm having the same problem.

  Connect your phone to your Mac. Launch the Photos app, and then do what it says in bold below.

  How to stop the Photos App launching automatically in OS X

  1. Connect the iPhone, camera, SD card, etc for Mac and app launch Photos leave itself as usual
  2. On the tab 'Import' from the Photos app, look in the upper left corner to find the device name, this indicates that the material is no longer automatically activate Photos app
  3. Click on the checkbox to 'Open Photos for this device' is more selected (, this failover on would allow the Photos app to open automatically when the device is connected)
  4. Smoking out Photos app, the change is immediate for this device - this can be activated at any time in the same app screen OS X Photos