How blackBerry Smartphones at NO charge via USB each time connect to PC

Hi, I'm not sure if it's a good idea to always load BB when connecting to the PC.   Therefore, I'm trying to find an option, do NOT charge the battery when connecting in the hope that it will extend the life of the battery.   How to proceed, please...

Thank you very much in advance.

There is not a way. Good load and overflow of these Li-ion batteries.

Drain the battery whenever it is bad.

Here's some good advice from loading, please read and you will see that many of them will be applicable to you.
http://www.blackberrynews.com/2008/05/20/battery-use-tips-for-your-maximum-battery-life/
And here: http://supportforums.blackberry.com/t5/BlackBerry-Community-Post/Power-Saving-Tips-for-your-BlackBer...

Tags: BlackBerry Smartphones

Similar Questions

  • Slow blackBerry Smartphone Super battery charges via USB

    I noticed that when I charge the phone using the wall charger, it will achieve a full charge in about an hour.  USB charging takes however as three hours.  Why is this?

    Two or three hours I guess. Of course, it will depend on your level of battery at the beginning. I just plug mine every night in a wall outlet, have scheduled Quickpull to run at 4:30, and I have a fully charged device and reset every morning.

  • BlackBerry Smartphones loading very slowly via USB power supply laptop

    When I use the wall charger, my fine storm costs.

    But if I connect it with the sync cable to my laptop - laptop is turned on with the BB Desktop software running (and I can confirm that I have a backup of the BB Desktop software then the drivers seem to work), the storm is charging is very very very slowly or not at all.

    Is it supposed to load OK via USB to the laptop power?  How can I go on troubleshooting this?

    Your question is not a problem, but normal and the answer "why" is simple. Wall charger puts out simply more power that the USB port on your laptop needs to (or can). In general, any single USB port is 100-150mA (and can be lower if your running on batteries and the system is allowed to control the ports), while the wall charger is to switch off a little more (700mA)... constantly.

    Not to mention that when connected to the laptop there is communication that passes between the device and the computer, especially if you use the Desktop Manager, which makes peripheral 'work' and try to reload at the same time. Sometimes the ' workload ' can be greater than the rate of charge, so why he does not pay at all.

    IMHO, load your device with the supplied charger. Only use your computer to charge your device in case of emergency. If you insist on charging the system with your laptop... Plug in your laptop computer, close the Desktop Manager and Device Manager and it should load a bit faster.

  • iPhone 5 c will not charge via USB on the laptop?

    Hi all.

    I have an iPhone 5 c and as about a week ago, does not charge via the USB port on my laptop. He sees very well in my wall sockets and Sockets USB as well, but not in my laptop. I have an Acer laptop running Windows 7. Windows is up to date, iTunes has the latest version installed. Whenever I plug in my phone, one of the following conditions occurs:

    (1) does not have

    (2) noise "plugged" USB lights, the window on the lower right, tell that a USB device has malfunctioned

    (3) (rarely) of phone calls after I tried several things

    What happened is I would plug my phone, she would charge via USB, iTunes opens automatically, and "trust to this computer" popup would come on my phone if I had unlocked it. None of this is happening now. I did the following to try to remedy:

    (1) power cord iPhone replaced (it was time for a new anyway)

    (2) uninstalled and reinstalled iTunes

    (3) restart computer and phone probably 29856 times

    (4) device Manager... nothing comes up at all, not even the unknown device. RARELY the unknown device comes up, then I get a "Code 10: this device cannot start" error, but it is * in a handbasket just trying to get to THIS point! and IF I do what they say to do to correct a code 10 (uninstall all USB and restart the computer, then USB devices hook to the top one at a time), so I'm now at my problem of a communication that don't meet pluse between my phone and PC

    5) tried to the registry editor, but not "upper filters" option rises

    (6) virtually every other option on this thread of 5 pages iphone not recognized by Windows 7

    Help, please?

    The USB port of your laptop does not provide sufficient power to recharge the phone. It is a hardware problem with your laptop, not the phone.

  • 12 switch can charge via USB 3.1?

    12 switch can be charged via USB 3.1?  Some descriptions are vague and all the answers I've found are for previous models.  It would be nice to have a not-so-awkward option for charging on the go.

    No, the power adapter is 19V 45W, the USB port is 5V.

  • BlackBerry Smartphones 9650 on network via laptop Get

    Thank you for taking the time to read my question.

    I wonder if it is possible to get my Blackberry on the LAN to my office through my laptop. Maybe connected to my laptop via USB or Bluetooth. What I have is how to get my laptop on the internet via tethering with my Blackberry.

    I have a wireless router at home and can get my Blackberry on this network (wifi), but my office doesn't have a wireless access point, and I would like to know if I can still get my Blackberry on the internet like that.

    Thanks again for your time.

    Brad

    You must have a Wifi card wireless in your laptop and connect to your BlackBerry via WiFi.

    There is not a data cable or bleuthooth connection.

  • How stop firefox from opening a startup page each time that I open it

    Hello
    at the beginning when I installed firefox, when I open the home page was something called firefox support.
    as I prefer google as my home page, I simply changed to google, but now whenever I open firefox, even if google opens on my active tab, a second tab opens each time with the support of firefox even topic.

    I find it very irritating and can not see how to solve this problem in the tab options.
    Please notify

    This site shows "Firefox support?

    Make sure only google.com is viewing on your Options.

    Reach

    > Options > general > Home Page

    Make sure it is said when Firefox starts (see my homepage) is selected

    Home page, make sure only https://www.google.com entered and not another page.

  • How to stop FIREFOX and Downloadhelper popping up each time with starting browser

    I love Firefox, but lately, it does leave annoying. FIREFOX opens with al kind of suggestions, and it is the same for DOWNLOADHELPER.
    I don't like required no popups, even from FIREFOX.
    How I refrain from FIREFOX to change my 'white page' as in the Starter again and again in the FIREFOX page? [I change back to the "white page" each time, but it is futile.]
    Nothing abut

    If you have the downloadhelper extension, try to remove it

  • How can I turn off What's New each time Firefox 4 begins

    I had to change my home page blank page, because every time I start Firefox 4, I get two tabs. One for my home page and the other for What's New

    http://www.Mozilla.com/en-us/Firefox/4.0.1/whatsnew/

    How can I disable this page open every time? Please write simple instructions if you know. Send me a link to change things does not work for me. Thank you.

    See the following for a few suggestions:

  • How to make win Explorer Options stay even each time to open the folder

    Using Vista Home Premium SP1, in the view of STANDARD as in XP. When I open Win Explorer I resize the window, adjust the display, change the column headers, change the column sizes and others. In other words I customize the display of the window I want and do my thing, then close when you are finished. The next time I open pgm all parameters resumed all that. "Obviously I tried to change all the options I can find but now, asking" HOW can I DO FILE VIEW OPTIONS RESTENT EVEN EACH TIME PGM IS OPEN?"

    Hi Willie_wonka,

    Thank you for using the Microsoft answers Forum.
     
    When you open a window and resize it, and then close, the new window will remain the same, until what you restart. Once you restart the computer, this is the default value. There is no option in windows to keep. However, you can try work around here.
     
    Open a window and make it the size you want
    Open a 2nd window and are the same size.

    The 1st window to the front, hold CTRL and click the red X in the upper right corner.
    Close the window of the 2nd in the same way using CTRL.

    You can also restore the default settings of the display of the tools-> Folder Options-> view files-> restore default settings.

    This should solve the problem.

    Kind regards

    Manasa P-Microsoft Support.

  • How blackBerry Smartphones wipe a backup and security for Blackberry Curve.

    Hi all, first time poster, second spectator of time... If that makes sense!

    New jobs and support of BlackBerry devices for the first time (mainly because I have one, ergo;) I'm an expert!). No problem it's always good to learn new things...

    Well, that's my problem - I have a user who cannot respond to emails - I have read some posts that were all on the money as to why and how to solve them. My problem is I have to perform a back up and wipe security, but do not know how and was hoping someone could guide my way. What is a professional user I won't spoil and lose\delete his email and addresses, etc.

    It is important that we use Notes and Domino (Boo!) instead of Outlook and Exchange? And it is an easy process?

    Thank you very much.

    London_Exile.

    Follow these steps for peripheral storage BlackBerry-

    1. connect your device using the USB cable

    2. click on the backup and restore

    3. click the backup button

    4. Select the location where you want to keep the backup data

    5. click on Ok to continue

    Note: I have described the process according to desktop manager 4.5. You can download it here.

    To wipe your handheld computer, follow these steps-

    1. go to Options

    2. security options

    3. General settings

    4. click on the Menu button

    5. Select wipe Handheld

    6. enter in blackberry to proceed

  • Used blackBerry Smartphones phone fully charge

    Right, earlier this evening, my phone is slow, and the black box you get sometimes kept appearing so I took out the battery, when he went to reload it stopped at 3/4 and has been blocked since. Ive tried to remove the battery longer, without success, it also won't let me put in safe mode.

    Ive loaded the application wizard, the following message appeared 'the blackberry desktop software doesn't have a blackberry device software for the device you have connected to the computer. Contact your wireless service provider or administrator. "What does it mean and what can I do about it? Im confused because I have not downloaded anything for months, does not something different on my phone, it just happen out of the blue.

    Any ideas on how to fix this would be really useful, thanks.

    You may need to reload the OS from scratch.  However, if you have all the backups, with BB Protect or using desktop software, your data will be gone.  Here are the instructions to do this.   If it was me I would let stand overnight first, plugged into the charger before you do the following:

    1. start by searching for your operator and the system operating file that you want to use.

    http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

    2. it's not bad to do a manual of your device first, backup using the Desktop Manager > backup. Close at the end Office Manager and disconnect it from BlackBerry. You can get the BlackBerry Desktop Software here http://us.blackberry.com/apps-software/desktop/

    3. download the OS from step 1 of the file on the PC then install on the PC by running (double click) the downloaded file.

    4. go into c:\program files Research in motion\apploader and delete the file named "vendor.xml." Also, check the following locations for the vendor.xml file and delete all instances of the file:

    On Windows Vista/7, go to C:\Users\YOUR_USER\AppData\Roaming\Research in XML Motion\BlackBerry\Loader (where 'YOUR_USER' is your user name)

    On Windows XP, go to C:\Documents and Settings\YOUR_USER\Application is In Motion\BlackBerry\Loader XML (where 'YOUR_USER' is your user name)

    5. If you simply update the operating system to a newer version, skip this step. If making a clean OS reloads use BBSAK from BBSAK.org and wipe the device (after doing a full backup), then after you get the 507 error (no OS installed) then go to the next step.

    6. plug the BlackBerry and double-click on "Loader.exe." It is located in c:\program files\common research in motion\apploader

  • How blackBerry Smartphones in Contacts, Research Notes?

    I use the 'Notes' field extensively in my Contacts and I've always been able to easily search for simple text for the keywords that I place in the Notes field with all my previous smartphones like my iPhone or Treo.  How to search those keywords text in my new Blackberry "BOLD"?

    Home screen > search

  • How blackBerry Smartphones at the point of connection of mask for instant messaging

    When I connect to MSN Messenger Instant using my Blackberry Curve, all my contacts see that I am online but I am connected via a Mobile device.  Is there a way to change the IM connection to hide the fact that I reached IM from a mobile device?  I want my access point to be transparent to my contacts and does not show if I am connected via my computer or my cell phone?  Is this possible?

    lj123 wrote:

    When I connect to MSN Messenger Instant using my Blackberry Curve, all my contacts see that I am online but I am connected via a Mobile device.  Is there a way to change the IM connection to hide the fact that I reached IM from a mobile device?  I want my access point to be transparent to my contacts and does not show if I am connected via my computer or my cell phone?  Is this possible?

    I looked at this myself and no it is not far from pretend for some service providers charge to send the message so they must warn this person that his goes to a cell phone.

  • BlackBerry Smartphones Priv Wireless charging

    I just read that the Blackberry Priv sold by companies to the Canada has no wireless charge.  This is my first Blackberry phone and I bought it because it seemed that it is an amazing phone, but also because I wanted to support a Canadian company.  When I read the card, he said he had the support wireless but now I find this is not the case. I got Samsung phones for years and the new include Wireless charging.  I was ready for a higher price for the Priv because I liked the features - and most of all it IS A COMPANY OF CANADA!

    I already have the phone... I am able to negotiate that has wireless charging.   I'm feeling a little ripped off the coast that this has not been stated when I bought the phone - because it's an important feature that has been removed from phones sold in the Canada.  I can't understand why a Canadian company would do it quietly to Canadian customers.

    So my question once again; Can I return Priv I just buy and get a BlackBerry directly who is responsible wireless?

    PS - I love the private (but all models must have a wireless charging for the price we paid)

    http://supportforums.BlackBerry.com/T5/Priv/will-the-Priv-sold-in-Canada-STV100-1-have-wireless-char...

    This thread has confirmed that Shop.BlackBerry.com only sells-1 model with Wireless charging

Maybe you are looking for