How to completely remove windows 8.1 skin pack including the logon screen?

Similar Questions

• Microsoft Windows Vista Home Permium freezes to the logon screen or gets stuck

  Microsoft Windows Vista Home Permium freezes to the logon screen or crashes on the black screen with Copyright Microsoft Corporation with the load with six green bars moving through bar. It will start in safe mode. I ran the auto repair (recommended) when starting after being forced to stop. After it says its full it restarts and remains stuck on the black screen with Copyright Microsoft Corporation with the load bar with six green bars that cross so I force disable it again.

  I had no problem with this computer, he got in last seven. It was working fine yesterday and then the without wire came out, so I restarted the computer to find the connection again as I had done several times before. That's when it froze on the opening of session and password screen. Who started this cycle of freezing or stuck on the black screen with the loading bar permanently running.

  UPDATE:
  Start safe mode then made the instructions on the clean boot. Not checked, all iteams he says and rebooted and it worked. So I went to the next step to select only half to refine the list. Restarted and when at the loading screen for a little over 30 sec - 1 min (which is more short than the time it took to work initially after the first stage of the boot with all unchecked), but it goes to a completely black screen that has not happened before. So now, a little lost, or do I have to keep trying to refine?

  Hi Greg,.

  It will not harm the computer to run it in a boot environment.  Some programs do not work properly because they were probably responsible for their own services and rely on them to work.  You have disabled all non-Microsoft services, and things like printers and software can be difficult.

  Click Start, then options type power and press ENTER.  Let us make sure that the system is not configured to sleep.  Go ahead and put the power plan to High Performance, then click on change Plan settings below.  There will be a framework for "put the computer to sleep".  The value than ever.

  If it continues to turn black in clean boot mode, you may have a hardware problem.  One thing you could do if it's a desktop system and really need to use it now, it is the lid of the machine and aim a fan in the box.  This will help if it is overheating.

  Please complete the steps to diagnose the problem with the boot when you have the chance.
  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to completely remove Adobe CC from my Mac, including my account?

  Hello guys, I'm new to the forum and I hope I am posting this in the correct location. I had adobe CC for about a year before that I had to cancel my membership for financial reasons. Now I'm ready to make comeback on reuse Adobe applications but I am using Adobe Photoshop CS6 and not CC. My employer bought CS6 and it linked it to his account. When I install Photoshop, I wonder to renew my subscription when the Adobe CC window opens. When I entered the product key during the installation he went through fine, until I'm about to launch photoshop. Why he asked me to renew my subscription? I already uninstalled all programs before installing the Adobe CS6 and I also ran the tool remover CC. I also tried to reinstall the CC and the signing with a different ID. As soon as I open photoshop, he asks me to renew. Is it possible to remove just my adobe creative cloud account? It's so frustrating!

  In this case, you can try 2 things.

  First is to remove the old files under the SLCache license, so that fresh new files will be created during the activation of the CS 6.

  He shud solve the problem.

  Or you can register by activating the CS 6 using different serial number Adobe ID. It will certainly work.

  What exact past is like email ID is linked to the creative cloud subscription, license files will be created for same, unless those who are removed from the model, during the activation process detects the activation again as the subscription of the CC.

  Why does this happen? because as you know CS 6 is also included as part of the subscription of the CC, there will be conflict with the process of activation because of the confusion. So to avoid this, try to remove old license files / previously created or connect with different Adobe.

  When you get up the pop window with a message to renew membership, in the same pop up, look for the option "" have a different ID ' and then connect you with the different Adobe ID. "  It shud work.

  Steps to locate the SLCache folder.

  (1) right click on the Finder icon and select 'Go - To Folder' option.
  (2) you will get a text box, type in the following command and then press the 'return '.

  / Library

  It will open the folder System Library.

  (3) then navigate to Application Support > Adobe > SLCache.

  All content of the renaming where folder SLCache folder from SLCache to SLCache-old can trash.

  Note:

  If you opt for the trash all the content. If you had installed Adobe apps using the serial number, , it will ask you to enter the serial number to activate all installed Adobe apps again. Make sure you have the serial number with you.
  

• How to completely REMOVE a network created from "setting up the wireless ad-hoc (computer-to-computer) network"?

  I have tried (in vain) to set up a network "wireless ad hoc" to allow another pc share my internet connection (which works fine).

  Needless to say, it didn't work!  But now... every time I search for wireless networks, my ad - hoc network returns as an available network.  Worse still, it now shows that non-secure, even if I got it.

  So I need to remove quickly... but HOW please?

  I "removed" control Panel\Manage wireless networks, but it keeps reappearing in the list of available wireless networks to connect to.

  Try this:

  Go to control panel > Classic view > Network and Sharing Center > customize > merge or delete network location > highlight the network, and then click on remove.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I remove windows 8 which was preinstalled on the new laptop.

  Just bought Pavilion g6 with 8 widows pre-installed.

  What I want to do is it erase and install Windows 7.

  I tried several different approaches, but nothing works... Help!

  OK thanks for the info.
  I have a full license for W7. ... but if the drivers are the issue, I guess I'll have to grin and bear it for now.
  (

• How to completely remove Beats Audio from my system?

  My computer is a number of product p7-1534, H2N63AA #ABA, running 64-bit Windows 8.1.  The audio driver was an IDT, downloaded directly at HP, specifically planned for my system.  I'm trying to figure out how to completely remove the Beats Audio from my system.  It appears in the Beats Audio, but don't control panel displays in the section programs, so I can't figure out how to uninstall IT... or it can be uninstalled without uninstalling the entire driver?  I tried to disable the Beats Audio screen and it cleared more of the effect it has on the audio, but not all - the bass is still substantially stronger than it should be.  All I want is for the music to sound just as it was initially recorded in the studio, not artificially enhanced by Beats Audio.

  I think that I'm finally rid of him.  I searched drive C for 'beats' and 'beat' and erased all those who appear to be associated with the Beats Audio.  I had to do that three times, each time by removing all tht files Beats appeared in a search.  Finally, after the third startup, nothing showed up in the search.  My audio works just fine and no more Beats Audio.  I guess I could still run beats through the motherboard, but, as long as I don't try to run beats, it loads is no longer automatically at startup.

  Thanks for your time.

• How to completely remove the trojan: win32/bamital for my computer, he says: it is partially removed

  How to completely remove the trojan: win32/bamital for my computer, he says: it is partially removed

  Hello
  1. where did you get the message saying that it is partially removed?
  2. what operating system is installed on your computer?
  3. what version of the operating system Windows am I running?
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can run Microsoft Safety Scanner from the link below.
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-GB/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
   
  You can also ask your question here:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_scanning

• How can I remove windows box office and upcoming facebook in the start menu

  How can I remove windows box office and upcoming facebook in the start menu

  I moved your question answers feedback to Windows desktop and personalization areas.

  You care to offer up what version of Windows, you are talking about but if it's Windows 7, I would right-click on the offending list and either:

  1. Remove from this list , is that the entry is in the most recent lower part / area most often used.
  2. Delete the Start Menu if the entry is pinned in the Start Menu (above the most recent / most often used).

• How can I remove Windows sealing to the guarantor Virus?

  How can I remove Windows sealing to the guarantor Virus?

  My computer has been hijacked with this stupid. Help, please!

  Why not use a real & free malware removal site instead of the Junk of Teesupport forum above paid?

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-proofness-guarantor

• How can I remove windows from safe mode?

  How can I remove windows to be in safe mode?

  [Moved - IE8, XP]

  Hello

  If the restart does not return to a normal startup, click Start > run (type) msconfig and then press ENTER.

  In msconfig, on the general tab, check (Select Select) Normal start then OK your way out.

  If you see a message on the system at Boot Configuration utility, select "do not show this."

  Don

• How can I remove Windows 2000 and let my only XP?

  How can I remove Windows 2000 Pro and let my only XP?

  I was given a computer from a friend.  It had Windows 2000 Pro top.  I installed my copy of XP on the computer, but do not delete the 2000 Pro here at this time.  Now, I would remove the 2000 and have no idea how to do it.  I'm fairly intelligent, but am a computer redhead.  In other words, if we say how to do it, I can.  I just don't know how to do it without help.

  If someone wouldn't mind helping me, I'd appreciate it.

  2000 has been upgraded to xp or xp resides in a separate partition. If the

  1 has taken place, open Add/Remove Programs, remove 2000, once in, open disk

  Cleanup utility, look for more button options, search for remove all but the last restore, point

  Run disk Cleanup, restarting the pc. If xp is on a separate partition, boot the pc with the xp installation

  CD, press r for recovery to the menu console, select 1 for press C: entered password,.

  type: DiskPart in DiskPart, delete the 2000 partition, create one, press the ESC key. Type: EXIT

  Go back to xp, in run, type: diskmgmt.msc in msc, R.click on the new free space.

  Select 'format' follow the wizard, use the default settings. Once her thru, L.click to this topic

  go to the actions, all, select 'Activate' exit msc.

• Dual boot Windows 2000 and Windows XP. How can I remove Windows 2000 safely without affecting Windows XP?

  I have 2 OS need to remove a

  I have 2 operating systems, Windows 2000 Pro and Windows XP How do to remove Windows 2000 Pro without messing my XP?

  Try to run, type: diskmgmt.msc

  MSC, locate & R.click on the partition of 2000, select 'Delete' of the score.

  Once through, locate the space, R.click now black on it, select "create partition".

  Follow the instructions in the wizard and use the default settings... Once thru, L.click on the new partition,

  go to the actions, all, select 'Enable', exit msc. You can / could also do it in

  the recovery console, in the console, type: DiskPart in DiskPart, highlite 2000 partition.

  Select 'remove', once by, select "create partition", once through, press ESC.

  then type: FORMAT D: D: NTFS being the new partition, are still active in

  diskmgmt.msc

• How can I remove Windows Photo Gallery. I prefer Microsoft Digital Image

  When I try to work with an image, the selected image goes directly to the windows photo gallery that I don't like.  How can I remove Windows Photo Gallery so I can use Microsoft Digital Image I prefer?

  When I try to work with an image, the selected image goes directly to the windows photo gallery that I don't like.  How can I remove Windows Photo Gallery so I can use Microsoft Digital Image I prefer?

  =============================================
  If you prefer a digital picture just change your file associations.

  See the following article:

  Windows Vista - change which programs Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

• How do I remove Windows 7 so I can legally install on another computer?

  How do I remove Windows 7 so I can legally install on another computer?

  We sat, 12 December 09 15:46:04 GMT, MJKant wrote:

  > How do I remove Windows 7 so I can legally install on another computer?

  If yours is a copy retail, you don't and I don't need to.

  But if yours is an OEM copy (for example if it came pre-installed on)
  your computer, you can not install it on another computer. Your OEM
  license restricted for the first computer, on which it is installed and it
  can never be legally moved to another.
  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
  Ken Blake

• How can I remove Windows first shield

  How can I remove Windows first "Ultimate Protection" Protection of my Windows 7 laptop?

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-Prime-shield

  Also try the free

  http://www.Malwarebytes.org/free/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx