How to configure SCC-Ci20 ISP with SCC-68

Similar Questions

• How to configure TB to work with Filemaker 10?

  Hello

  Thanks for any help you can offer.

  I'm on a Macbookpro on 10.6.8. I want to send e-mails via Filemaker Pro 10.0v1. Thunderbird 31.0 is my default e-mail client. I think I must also configure mac Mail somewhere in this process. These e-mails will be turned off on 5wcw.featheredpipe.com located on the webmail via my Web site. This will complicate things?

  Please excuse me if I'm not using correct jargon here - it's new to me. Support FM advises to use Eudora - I hope it's just old info and Thunderbird will work.

  Thanks for any help,

  Linda

  Looks like the real question is how to configure the file creator to work with Thunderbird. Most of the applications like that just use the default mail client. If it does not, you should ask the people to lead Maker how their software works.

• How to configure ESX and vCenter with two areas virtualized?

  Hi all

  I'm quite new to VMware please bare with me, I'll try to get to the point.

  I am building a new infrastructure for a customer which will look something like the image below...

  My questions concern vCenter and the best way to install it and configure it, taking into account the environment below.

  (a) is it possible for vCenter to manage these two areas, even if they are completely separate?

  (b) how to configure the physical server Win 2008 in what concerns an area? If both virtual areas have their own domain controllers is to say 'Live-domain' and 'Test-domain' box Win 2008 won't belong to one, so what do I do with it? I can't join the party to another area because it is not a. And I can't let a working group.

  Any advice would be much appreciated

  

  That sounds right. Yes, the ESX host will meet your virtual domain controller's DNS information. DNS is very important in an active VMware with HA cluster.

  Virtual domain controllers (and, as a result, DNS) are fairly mundane, no worries, I designed / management of environments that were 100% virtual (incudling vCenter).

  Make sure that you do not enable the option "synchronize time with host" on the virtual domain controller VMware tools. Otherwise, you will have a loop (with VM, VM host synchronization synchronizes with host). The option is disabled by default.

• How to configure the network wireless with an Equium L40-10 X?

  Could someone please help?

  To configure problems Netgear DG834G wireless router to communicate with my X L40-10. My ISP does not support the Atheros AR5007EG Wireless LAN.

  Thank you.

  Hello

  I can't imagine that it won´t work. Just a few questions:

  -Work with the factory-installed system?
  -Why Don t you use "Utility Configfree" Toshiba?
  -Have you already set on your router and your default machine?
  -Could you please give some information about your system and configuration of routers and computers? Can be useful for those who are not standing next to you, and to have physical access to your machine to check what the problem is. :)

  Maybe you should check these links to see how to connect to a wireless network:

  http://compnetworking.about.com/cs/wirelessproducts/a/howtobuildwlan_4.htm
  http://articles.TechRepublic.com.com/5100-1035_11-1048162.html
  http://www.Microsoft.com/technet/community/columns/cableguy/cg0406.mspx

  Good luck buddy
  See you soon

• How to configure pop3 on ipad with iOS 9.3.3 mini mail

  How to make the configuration of email pop3 on ipad with iOS 9.3.3 mini

  Try the steps in these Apple articles.

  Set up an e-mail account on your iPhone, iPad or iPod touch - Apple Support

  Get help if you have any questions using a POP email with multiple devices - Apple Support account

• How to configure Outlook express account with the Gmail account?

  Original title: I want to configure my outlook express to receive and send to my gmail account.  I'm not familiar with the POP SMF accounts.  Help, please

  HOW CAN I SET UP MY OUTLOOK

  1: enable POP in your Gmail account:
  http://mail.Google.com/support/bin/answer.py?answer=13273
   
  2: configuration of your e-mail to Gmail client: Outlook Express and Outlook 2002:
  http://mail.Google.com/support/bin/answer.py?answer=13276&topic=1556 
   
  Configure your Outlook Express client to work with Gmail:
  http://mail.Google.com/support/bin/answer.py?answer=76147

• Error on how to configure Outlook Express 6 with Gmail

  For all the,.
  when I try to send a mail to test (from OE) I get the follo wing error message:
  The connection to the server has failed. Account: 'imap.gmail.com', server: 'smtp.gmail.com', Protocol: SMTP, Port: 456, secure (SSL): no, Socket error: 10060, error number: 0x800CCC0E

  Here are my settings under accounts:

  Account
  mail (default) IMAP.gmail.com

  General
  Properties
  Mail account - imap.gmaill.com

  Servers
  Information about the server
  Server IMAP incoming mail server
  Incoming mail (imap) imap.gmail.com
  Outgoing (SMTP) mail SMTP.gmail.com

  Outgoing e-mail server
  My server requires an authentication-"verified".

  Advance

  The Server Port numbers
  Mail (smpt) outgoing 456
  Mail (imap) incoming 993

  Thank you

  The Server Port numbers
  Mail (smpt) outgoing 456
  Mail (imap) incoming 993
   
   
  Try to use port 465.
   
  1: enable POP in your Gmail account:
  http://mail.Google.com/support/bin/answer.py?answer=13273
   
  2: configuration of your e-mail to Gmail client: Outlook Express and Outlook 2002:
  http://mail.Google.com/support/bin/answer.py?answer=13276&topic=1556 
   
  Configure your Outlook Express client to work with Gmail:
  http://mail.Google.com/support/bin/answer.py?answer=76147

   

• How to configure webutil 1.06 with oracle Developer suite 10 g R2

  Hi all
  My computer configuration is
  
  OS-> Windows 7 ultimate (32 bit)
  -> 1 GB RAM
  
  I managed to install oracle XE and developer suite 10 g R2 in my computer. Now, I want to configure webutil. Please give me the procedure step by step for her.
  
  Thanks in advance.

  I suggest you take a look at the document WebUtil Version 1.0.6 - Notes of Production , or better still, the Developer Oracle Forms - WebUtil User Guide and follow the steps listed in the Configuration of WebUtil and specifically the installation Checklist time. Print a checklist and make sure that you complete each step. When you are finished, WebUtil must be properly configured and working.

  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• How to configure Firefox to work with my antivirus software?

  Norton Internet Security installed. Norton appears automatically in IE and has a canopy that protects the connection details. I don't see this in Firefox.

  You can check if your Norton browser modules are enabled on the addons page? Either:

  • CTRL + SHIFT + a
  • Firefox orange (or the Tools menu) button > Add ons

  In the left column, click Extensions.

  Extensions disabled clustered down on a gray background. If they are there, try to activate them.

  If they do not, try using Norton LiveUpdate several times to make sure that you have the latest versions. You will probably have to close Firefox and start it up again after the LiveUpdate so that Firefox detect new files.

  A little luck?

• How to configure a valid account to windows mail, I also need to establish a connection to make it work with windows 9?

  I want to send an email from the site when I have questions for them even if I'm not setup with a valid account, nor do I have a connection.  My computer runs with broadband. 9 Windows?

  Hello

  You must configure your windows mail with your isp e-mail account, internet service provider for your service to wide band/dialup

  They provide you with account settings you need to do

  Ask them to

  username
  password for your access broadband account / distance with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  and here's how to configure windows mail after getting the email correct account settings

  http://www.vista4beginners.com/Windows-Mail

• Cisco ASA5520 facing ISP with private IP address. How to get the IPSec VPN through the internet?

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  Hello guys,.

  I have Cisco ASA5520 facing the ISP with private IP address. We don't have a router and how to get the IPSec VPN through the internet?

  The question statement not the interface pointing to ISP isn't IP address private and inside as well.

  Firewall configuration:

  Firewall outside interface Gi0 10.0.1.2 > ISP 10.0.1.1 with security-level 0

  Firewall inside the interface Ethernet0 192.168.1.1 > LAN switch 192.168.1.2 with security-level 100

  I have public IP block 199.9.9.1/28

  How can I use the public IP address to create the IPSec VPN tunnel between two sites across the internet?

  can I assign a public IP address on the Gig1 inside the interface with the security level of 100 and how to apply inside to carry on this interface?

  If I configure > firewall inside of the item in gi1 interface ip address 199.9.9.1/28 with security-level 100. How to make a safe lane VPN through this interface on the internet?

  I'm used to the public IP address allocation to the interface outside of the firewall and private inside the interface IP address.

  Please help with configuration examples and advise.

  Thank you

  Eric

  Unfortunately, you can only complete the VPN connection on the interface the VPN connection source, in your case the external interface.

  3 options:

  (1) connect a router in front of the ASA and assign your public ip address to the ASA outside interface.

  OR /.

  (2) If your ISP can perform static translation of 1 to 1, then you can always finish the VPN on the external interface and ask your provider what is the static ip address assigned to your ASA out of the IP (10.0.1.2) - this will launch the VPN of bidirectionally

  OR /.

  (3) If your ISP performs PAT (dynamic NAT), then you can only start the tunnel VPN on the side of the ASA and the other end of the tunnel must be configured to allow VPN LAN-to-LAN dynamics.

• Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Hi stuckfree,

  The question you posted would be more appropriate on the TechNet Forums. I would recommend posting your request here.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• you want to have my pc to be a configuration to boot Daul with Windows XP PRO sp3 and WIN7 how?

  Daul Boot Windows XP PRO sp3 and WIN7

  I want to have my pc to be a configuration to boot Daul with Windows XP PRO sp3 and WIN7 how?

  Hello

  Access the link that has a video on how to set up a configuration to dual-boot between Windows XP and Windows 7: http://www.microsoft.com/showcase/en/us/details/ae3108ed-a8a1-4ba3-8698-01b8cedd2cf4

  Here's a few that has information on multiboot: can I have multiple operating systems on my computer (multiboot)? : http://windows.microsoft.com/en-US/windows7/Can-I-have-more-than-one-operating-system-on-my-computer-multiboot

  Install multiple operating systems (multiboot): http://windows.microsoft.com/en-US/windows7/Install-more-than-one-operating-system-multiboot

• Example: Pavilion x 2: how to configure RamBoost on HP Pavilion x 2 with adapters of Sandisk Ultra new UHS-1 class 10 64 GB on W10

  How to configure RamBoost on HP Pavilion x 2 with adapters of Sandisk Ultra new UHS-1 class 10 64 GB on W10

  Don't know if it is compatible or not... also a trick to avoid the OverScan trying to hook up an HDMI cable to a TV Vizio... works ok... but it should generally leave X 2 open and when the screen is larger on the bigger screen and cannot see the controls in the corners as they bleed or overscan out of sight

  Thanks for your help!

  Jim [personal information]

  Wow... THANK YOU BANHIEN! the freebie of Ccleaner is mentioned to help clean up the UNEEDED StartUps still a good idea?

  http://www.howtogeek.com/74523/how-to-disable-startup-programs-in-Windows/

  Also, because apparently the RamBoost is a weak idea if not worthless,... .but I still want to improve the speed of this small toy...

  What of the notion of OVERCLOCKING the tiny coprocessor that nets out at 1.33 ghz or more?

  .. masse Sandisk have to help sort that happens or you know someone who has tried to do?

  .. from way... CONGRATULATIONS on STEROIDS to YOU kind Sir!  !!

  sort of breath which left a few hairs back this ol geezer left!

  thx for being patient AND so QUICK with tech loving amateurs like me.

  MAY GOD BLESS YOU AND HAVE A GREAT WEEKEND!

  SINCERELY,

  JIM.

• My IP security camera is different my network ip address, how to configure the camera to match the ip address with the router cable time Wörner

  Please someone help me configure my camera IPsecurity model m12 mobotix ag. It allows to work in the corporate network, but they close down and I didn't bring the camera House but there different IP address of my network and I don't know how to configure the camera to have the same IP address with my home router to TWC, thanks

  Router connections by opening network, in the Panel control, search for the router / properties, enter its configuration

  data in the boxes provided, you will get on the router, a sticker shows data. If lost or deleted, go to its Web

  for the data. Also, perhaps the home page of IP camera offers software/drivers.