How to configure Symantec certificate to the comcast e-mail address

Similar Questions

• How to configure Windows to allow the parameters and software downloads to appear in system and standard user administrator?

  I HAD TO REINSTALL WINDOWS VISTA (SERVICE PACK 2) DUE TO A TROJAN HORSE THAT ATTACKED MY SYSTEM. I USED THE SUPPLIED RECOVERY DISCS SET WITH MY COMPUTER BECAUSE THE SOFTWARE HAS BEEN PRE-LOADED AND I HAVE NOT RECEIVED SOFTWARE FACTORY. WHEN I WAS SETTING UP USER ACCOUNTS, I CREATED THE ACCOUNT TO ADMINISTRATOR (WITH PASSWORD) AND A STANDARD USER ACCOUNT. WHEN I CHANGE THE SETTINGS IN MY COMPUTER IN EACH ACCOUNT, IT DOES NOT APPEAR THERE EITHER ACCOUNT. I DO CHANGES IN PARAMETERS OF EACH ACCOUNT INDIVIDUALLY. CAN I SET UP SO THAT WHEN I CHANGE THE SETTINGS, IT WILL DO THAT IN THE TWO ACCOUNTS? THANK YOU FOR YOUR HELP.

  original title; HOW TO CONFIGURE WINDOWS TO ALLOW THE SETTINGS AND SOFTWARE DOWNLOADS APPEAR IN ADMIN SYSTEM AND STANDARD USER?

  Most PC manufacturers who don't give you the disks give you a partition on your hard drive that contains the images of the disks so that you can burn yourself.  You should check out.

  When you say "change settings in both accounts' exactly what are the parameters what do you mean?  It is normal that many Windows settings to be on a per user basis.  For example. the desktop background is a 'definition' which is completely independent for each user.  You cannot set up a wallpaper for a user and hope that it displays desktop of another user.

• How to configure Outlook to display the date, they come in too?

  Original title:

  Dating of incoming emails

  My incoming emails list the time they came.  How to configure Outlook to display the date, they come in too?

  Hello

  Thanks for posting that ask about the Microsoft Community.

  I understand that emails do not show the date on which they were received.

  Are you referring to Outlook.com or Microsoft Office Outlook?

  As Zigzag3143 mentioned previously, you should be able to see the dates of your emails received after 24 hours of arrival. If this function does not work for you, I suggest you check the following settings:

  1. View - this is located in the upper left corner of the Inbox pane, the parameters must be defined on all the.
  2. Reorganize by -this is found in the upper right of the Inbox pane, make sure that your emails are filed by Date.

  This should fix your emails in the order of their arrival and should provide the date next to the subject line, if the enamel is older than 24 hours.

  I hope this helps. Answer please if you need more help or have any other question about Windows and/or Outlook.com, we are here for you help.

• How to configure Adobe Reader to the default program to read PDF files after you install Adobe Acrobat?

  How to configure Adobe Reader to the default program to read PDF files after you install Adobe Acrobat? I have a few other programs that need to use Adobe Reader showing 'photo' that are PDF files, and after the installation of Acrobat, it is Acrobat that opens automatically, with a message whenever Acrobat cannot be used for this and will be closed, and then the Player opens. I don't like having to see this message every time... Thank you! :-)

  Hi anne-grethea26777033,.

  You can do CD player as your default application by browsing in Edition > Preferences > under categories, select the "Général" and at the bottom of the window, you must select an option which reads "set as default PDF Manager" under the label of startup application and click OK.

  

  Let us know if that helps.

  Concerning

  Sarojini

• How to set up a new email account using the same e-mail address of my old computer?

  How can I configure sup a new email account using the same e-mail address of my old computer?

  Hi Melanie,

  Are you referring to the Mail app or user login account?

  If you are referring to the Mail application, you can consult the following link: Set up Mail and add contacts

  If you are referring to the user login account, you can consult the following link: create a user account

  It will be useful.

  Keep us informed on the status of the issue.

• How to remove the 2nd e-mail address of a contact?

  A friend sent me a change of email address, which I have added to the Contacts on my Mac.  Contacts have been propagated to my iPad using iCloud.  I removed the old address of Contacts in my Mac, but every time I try to send a message and type the first letters of his name on an e-mail on the iPad, the old e-mail address appears.  How can I remove the old address?  I know that on the Mac, there is a "previous winners' list where these addresses can be removed, but how can this be one on an iPad?

  Thanks for your suggestions,

  -Tod

  When this old e-mail address appears, hopefully, you will see an 'i' in a circle on the right side of the pop-up window.  Click that circled 'i' and you will find a delete option.

• How can I move the outlook express emails from an XP PC to an another XP PC that has the same e-mail address without overwriting existing messages on this second PC?

  How can I move the outlook express emails from an XP PC to an another XP PC that has the same e-mail address without overwriting existing messages on this second PC?

  I need to group together all messages from e-mail in a PC and to retire the first PC.

  This could be problematic. I guess or OE is over? This would make it easy.
   
  One thing you could do requires some manual work, but much less removal of dupes. For example, the Inbox. In the machine, you are going to scrap, create a new folder and move all messages in your Inbox to it. After you import on the other machine, you can drag the messages you need this folder in the Inbox, and then remove the user created the folder.
   
  And then there are tools to remove the dupes. This one for example.
   
  OEX
  http://www.oehelp.com/Oex/default.aspx 
  
   
   

• I had my hacked email. I deleted the email address on the SMTP server, but Thunderbird is not allowing me to remove the hacked e-mail address.

  I had my email "[email protected]" pirate. I deleted the email address on the ISP e-mail server and created a new email "[email protected]" - without the H immediately after John.
  Thunderbird, I added the new email address (see table).
  However, every time I try and send an email, Thunderbird ask again me the password to the original email.
  How to make the new e-mail, the primary e-mail address / default and delete old email marked in bold on the seal - which I suppose is the right course of action?

  Concerning

  John Halsted

  Enter the account settings.

  Select the new address to be the default.
  All at the bottom of the list of accounts in the left side is account Actions.
  Under this menu is to set as default.

  FYI: The display of your e-mail is that a public forum is the best way to provider of this info to hackers. I edit this info and refrain from publishing personal information in the future.

• Lost access to the primary e-mail address when you set up a second e-mail address

  I am computer illiterate.  Just do basic.  Have had the same e-mail address for years.  Have more than 300 messages on it.  Need to a second email address (for a single transaction) and do it, however, he knocked my main e-mail address.  How can I retrieve the most important address?

  Please use my email (ugh) second to answer.  It's * address email is removed from the privacy *.

  If you use Windows Mail in Vista, then go to tools | Accounts | By mail and make sure you have the two accounts listed.  If not, add that you have listed and then you will get both.

  Otherwise, be more specific on what you use for email.

  Steve

• The alternate e-mail address in my hotmail is not one that I put in place. If someone has hacked into my account?

  The alternate e-mail address in my hotmail is not one that I put in place. If someone has hacked into my account?

  Hello dankron,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

   

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• Attached to the boxes e-mail addresses

  I am new to LiveCycle.  I have created a form that is used by students to apply for positions of leadership on campus.  According to what items they wish to apply, for the purposes of the form to be submitted to an e-mail address.  Currently at the end of the form I have several buttons validate who is confused.

  Is it possible to set up my form so that when a check box is selected the corresponding e-mail address is added to the submit button?  So if I check the box 1, 4 and 10, when I click the button submit the form is sent to e-mail1 business4 and email10.

  Thanks for any help you might be able to provide.

  Here's an example I created with what I think you want.

  Paul

• How to configure SMTP settings to the 'SCAN to Email' function on the XEROX WorkCentre 3615 multifunction printer?

  Separated from this thread.

  Have another QUESTION of community, please can someone help me on how to configure the SMTP 'STEP by STEP' settings to "SCAN to Email" function on the XEROX WorkCentre 3615 multifunction printer? Where should I start? On the computer or the printer? I have gmail emails to serve 'FROM' and for people, I'll send scanned docs, what is better to use email, gmail, at & t, yahoo or so? Thank you in advance.

  Hello

  Please contact Microsoft Community.

  Please confirm which email client do you use?

  I suggest you refer to the article mentioned to implement a multifunction device or an application to send emails with Office 365 for reference:

  https://TechNet.Microsoft.com/en-us/library/dn554323%28V=EXCHG.150%29.aspx?f=255&MSPPError=-2147217396

  I hope this helps. Do not hesitate to contact again us for any technical assistance,

• How to configure my PC for the first and after

  Hello:

  I have some problems with the Adobe software (especially with the first, after and Photoshop), when working with HD images (1920 x 1080 p, any format and with images of high resolution PH); the software will really slow sometimes when I use effects, such as the effects of correction of color or movement backward, or several cameras on first; the programs sometimes hang, or the empty screen to lose what I was doing...

  Here is the configuration of my PC:

  -Motherboard: Asus P9X79 PRO

  -Processor: Intel Core i7 - 4820 K 3.7 Ghz

  -Graphics card: GigaByte GeForce GTX 770 OC 4 GB GDDR5

  -RAM: G.Skill Trident X DDR3 2400 32GB PC3 - 19200 CL10 (32GB) 4x8Go

  -OS: Windows 7 Ultimate

  -Main hard disk: SSD SanDisk 256 GB SATA3

  I think with this PC, things must be faster, I tried to configure the RAM settings to give the software the max that I can, I've updated everything and I know that if I had an another SSD just for images, it would be better, but I've worked in other PC with a similar setup and they where faster... What should I do? How to check that everything is well configured?

  Thank you very much!

  PC hardware is not bad... as it goes.

  What you really need, is the other drives... usually a disk configuration 4-5 place the OS/programs on the C drive and many others, the following "bits": project files; cache/database files; preview files; media files.

  This would be a system 5 units, each option on a separate disk. And there are combos for running with 2, 3 or 4 drives total.

  The other option was an array of RAID - 0 4-6 disc scratched with your system drive.

  However ... Bill Gehrke, The expert on these things, reports rather incredible success using m.2 readers than a Samsung external T1, the latter able to run through a port USB3 (not nearly as high speed with external drives need more) and very usable read/write time with everything the program file being on the Samsung Q1 cross.

  Here is a link to Newegg to the referenced reader...

  http://www.Newegg.com/product/product.aspx?item=9SIA3FA2MW5954&utm_medium=BehEmail&cm_mmc= EMCPB-012016-_-PB-_-Bluecore-_-Content&utm_campaign=Post_Browsed&obem=kG0pQ4ZnarpJlim7Preg r_zepa4_BlGBGIm7flZoG3k % 3D & utm_source = Bluecore

  Now, at $184 / USD, it's a bit spendy gig for the "disk space", BUT... it is big enough for most small to moderate users to have a few projects on at any given time. You just need to move things on and outside it as needed. But you compare the total cost of connection that versus purchase say disks 5 3/4-to & so that they know, it's significantly less expensive. And you can use external references USB3 large and cheaper for backend storage of work not in progress.

  So... maybe that would 'fix' your questions...

  Neil

• How to create a certificate using the keytool / terminal?

  I have problems with the creation of certificates using the Terminal. I use the instructions below and exactly all the information required. When he asks me to type 'Yes' and confirm, the whole process starts right at the beginning over and over and I have to type in the same things. Do I did wrong? How can I confirm the information I typed in?

  I'm trying to create a certificate to sign the apps for GooglePlay and Amazon. I use professional DPS.

  Thanks for the help!

  Directions for use:

  (Mac OS) Create a certificate using Keytool

  Open Terminal, located in Applications > utilities.

  Type (or paste) the following line (replace "myname.key.p12" with the actual name of your certificate):

  1

  keytool - genkey - v - keystore myname.key.p12 - alias alias_name - keyalg RSA - keysize 2048 - stores pkcs12-validity 10000

  The "10000" specification sets the expiration date after 22 October 2033.

  Enter and enter a password. Until the Viewer constructor supports the creation of custom Android applications, it is necessary to share this password with Adobe. Create a password that you can share.

  Follow the prompts to specify the certificate information.

  When you are prompted to confirm the choice, enter Yes and press return to use the same password.

  A certificate is created in your quick location, such as your user name folder. Copy the certificate file to a known location. Note the password as well.

  It could be access question. Enable the root user, and then try again.

• How to configure webgate to use the form on different server login page?

  Hi all, I would really appreciate help with this please.
  
  OAM performs the authentication of the forms on IIS 6. Connection work well on my primary host.
  
  I now need to protect another IIS instance on a different server and have installed a web portal on this topic.
  
  How can I configure it to use the same login for this webgate form? Form: parameter must be relative not sure if this is possible.
  
  So, I copied the original form of the connection in the same relative position on the new server and tried, but concluded that the MESSAGE to the target/access/dummy is now is more caught by the webgate and so I get a 404, rather than a redirect to my page.
  
  Thank you very much
  
  Bernie

  Hi Bernie,

  The challenge parameter redirect in the authentication scheme is used for this. Put the server in this area (for example https://myauthserver.domain.com) and have the form: parameter against that server (for example, /public/loginform.html).

  Either way, on IIS you would put the action of the form to the webgate, for example /access/oblix/apps/webgate/bin/webgate.dll

  Kind regards
  Colin