Keyboard, mouse not responding do not initially on the Wake computer

Similar Questions

• Keyboard Dell Bluetooth is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.

  My Dell Bluetooth keyboard is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.  I use keyboard now, but it seems not be installed yet when I check my keyboard or bluetooth devices. Keyboard does not work after so I'll try to figure out what to do before moving into the power saving mode. Help, please. I did all the updates from microsoft, and there is no update for my bluetooth device, I checked.

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the model of the keyboard?
  3. are you an error message or error code?
  4. which version of the Windows operating system is installed on your computer?

  I suggest you to consult the following Microsoft article and check if it helps.

  On troubleshooting in Windows 7 power management: http://support.microsoft.com/kb/980869

  Troubleshoot keyboard: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-keyboard-problems

  Keyboard and Microsoft mouse refer:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Reference:

  Troubleshooting external Dell Wireless or Bluetooth keyboards and mice: http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=277550#Issue0_1

• Satellite C50 - keyboard mouse not working not

  The keyboard mouse touchpad has stopped working and I can't find a way through Control Panel to fix it. The external mouse through the wireless works fine, but I can't use the keyboard mouse at all.

  Go to the Settings Manager to your Toshiba, by clicking on the Start button in the lower right corner, click the arrow on the down in the lower right and then look for a program called system listed among Toshiba services settings. Go to keyboard and see if you can change all the settings it will allow you to turn the keyboard on or off. If none is listed, then go to your BIOS manually and see if it allows you to toggle the keyboard. Your numlock and capslock has a light on them to indicate that they are on?

  EDIT: I also found this when you browse the forum, it may help.

  Press CTRL ALT SHIFT to get your process to come. Find the Touchpad "enhancer" process. Complete the process. Your touchpad works until the next reboot, how simply repeat this step.
  If you're struggling complete the process without being able to use your touchpad, I discovered a curious thing. If you hold a mouse click, you can move the arrow of the mouse with the touchpad very well. Its a bit... awkward... but all you have to do that is to end this process and after that, you can use the trackpad normally.

• Satellite 200-170-keyboard does not work and the keyboard stops working

  My U200-170 2.5 years, I have the following problem:

  When after the start of the key is opperated the keyboard does not work and the keyboard no longer works (works until the button is pressed) connect a keyboard and a usb mouse. does not work because that device unknown. After Internet received external usb driver work ok. someone at - it an idea to solve this problem.

  Thank you

  AJAN

  Sounds like keyboard problem.
  The operating system uses the pilot to clean keyboard and generally it s not necessary to reinstall the special keyboard driver.
  But one thing is really strange; the yellow exclamation mark in Device Manager

  Eventually it s only a problem of software in such a case, a system restore can be useful...

  Have you checked if the keyboard works in the BIOS?
  Do this!

  If the keyboard does not work in the BIOS, then you will need to replace the internal keyboard with the new.

• SK2061: The wireless keyboard will not connect when the PC is turned on.

  My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it).  Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.

  The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.

  Hello @JimCar82,

  I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!

  Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Why wireless keyboards are not compatible with the Apple TV (4th generation)?

  Why wireless keyboards are not compatible with the Apple TV (4th generation)?  Similarly, why didn't the App compatible with Apple TV Remote (4th generation)?  They will be in the future?

  No one here knows why Apple have so far decided not to support Bluetooth keyboards, or if they are likely to do so in the future. The iOS app is compatible with the 4 ATV in its latest version (4.2.3) - https://itunes.apple.com/gb/app/remote/id284417350?mt=8

• EliteBook 1020: External keyboard does not work in the form of Bitlocker

  We had a few HP 1020 and 1040: models recently, and all have the same question. When the laptop is connected, the external keyboard does not work in the form of Bitlocker. It works in the BIOS and in Windows itself, but not in Bitlocker. This means that we must open the laptop screen to enter the Bitlocker pin, then let it open and GPO that dictates the computer into hibernation when the lid is closed. We have twisted the GPO, but in vain. Anyone else seen elsewhere or a solution?

  If the bios is up to date, I would look at the BIOS settings. I think that Fast Boot is enabled in your case, this may cause usb devices not to see in the stadium that BitLocker requires

• Microsoft Wireless Comfort Keyboard 4000 not recognized on the new 64 bit Windows 7 computer.

  Microsoft Wireless Comfort Keyboard 4000 not recognized on the new 64 bit Windows 7 computer. The computer thinks I have a keyboard 600 wireframe. I tried to install the IntelliType 8.2 64-bit for Windows 7 driver but it tells me that I already have a newer driver installed and won't let me install it. Are there specific drivers for this keyboard. I love the keyboard but I can't customize the special keys.

  Hi Tom,

  Check out these links and check if it solves the problem:

  "Troubleshoot the Intellipoint or IntelliType software installation, LifeCam.

  http://support.Microsoft.com/kb/953691/en-us

  "Troubleshooting: keyboards"

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/keyboard/wireless-Bluetooth

  Please let us know about the status of this issue.

• Error message: the 'Microsoft.Jet.OLEDB.4.0' provider is not registered on the local computer.

  Hello

  I've successfully installed the NCLEX - RN 4000 on Microsoft Windows 7 Home Premium edition. However, I get the error message "the"Microsoft.Jet.OLEDB.4.0 provider is not registered on the local computer"whenever I try to open the program.» The package says that the software is compatible with versions of Microsoft Windows Vista and XP. I tried to open the program using program compatibility issues resolution which did not work. I also do a right-click on the icon and choose Properties/compatibility and then selected the most recent Microsoft Windows OS program is compatible with and apply the settings. To my dismay, it was also a no go. I did some research and reading that Microsoft Windows 7 Home Premium 64-bit is not compatible with the programs .msi. So, I checked and found out that the file ends by .msi.

  With all that said, these are the questions that I find myself with:

  What can I do to fix this so that I can use my 4000 NCLEX-RN program?

  Why Microsoft Windows 7 is not backward compatible?

  Any help with this problem would be greatly appreciated!

  Thank you very much!

  UPDATED: Wednesday, April 21, 2010

  If someone else has the same problem when you try to run the NCLEX-RN 4000 program on the Windows 7 operating system, you will need to contact Wolters Kluwer Health (the manufacturer of the NCLEX-RN 4000 Review program). The customer service number is 1-800-638-3030. Once you reach a customer service representative explain why you call and they will send you by e-mail an update that will allow the NCLEX-RN 4000 to run on the Windows 7 operating system. Please do not hesitate to ask if you have any questions! And thanks to all who have responded to this topic! I enjoyed all your comments!

• NLB - the RPC server is not available on the specified computer. To connect to the < Server >

  Have a Windows 2008 R2 SP1 NLB service two nodes on VMWare. Bothe nodes have two network cards. Internal one dedicated to NETWORK load balancing and the other for the network.

  Management console of NLB on a single poster NLB node is in good health. The two nodes are visible and OK.

  Management of NLB on the other node shows only its own node - while the other node is missing. An error when updating...
  "The RPC server is not available on the specified computer. "otherNode.com" connection error"

  I disabled the back loop check - it makes no difference.

  Any help please?

  I think I solved the problem...

  As I wrote previously, I disabled the back loop check in the registry on both nodes, create a new DWORD (32 bit) key...
  HKLM\SYSTEM\CurrentControlSet\Control\Lsa\DisableLoopbackCheck - with a value of 1

  Then, I made sure that the link speed & Duplex on all network interfaces are set to a specific value (no Autonegotiation), for example. 1000 Mbps Full Duplex (in my case).
  Ideally only the NIC - on each node - connected to the NETWORK load balancing must be configured with hard values.

  This solved the RPC error in my environment of NLB.

  Hope this helps those who have the same symptoms.

  Samuel.

• The Client computer could not connect to the remote computer

  Hello

  Relating to the name or a customer request. They have a few problems with the remote desktop connection in Windows XP.

  They haveWindows Home Edition and XP Professional on his laptop computer on his desk.

  They say:

  "I took the liberty to install Office remotely on computers, because it was not installed on the desktop.   I was able to connect to my laptop through my desk, but not vica versa. »

  "When I try to connect to my desktop from my laptop, I get an Error Message"the Client computer could not connect to the remote computer... »

  Hello

  You can read the following article and install the patch available to see if contributing to the issue.

  You receive an error message "the client could not establish a connection to the remote computer" when you try to establish a desktop remote connection to a Windows XP-based computer

  I suggest that you post your question in the TechNet forums if you encounter other issues related to the remote desktop connection.

  Windows XP IT Pro Forums.

• I get the error code that microsoft.jet.oledb.4.0 provider is not registered on the local computer

  I get the error code that microsoft.jet.oledb.4.0 provider is not registered on the local computer

  I have the 64 bit vista edition and can't find a way to get this program to run. Can someone help me please. I need this program for school

  http://social.msdn.Microsoft.com/forums/en/SQLDataAccess/thread/ded16d08-b98c-4130-a6af-d3df4061494c

  Read the information on the link above; and the link to the answer.

  See you soon. Mick Murphy - Microsoft partner

• Error when you try to run 4000 NCLEX-RN: The Microsoft.Jet.OLEDB.4.0 provider is not registered on the local computer.

  ' Microsoft.Jet OLEDB.4.0 error

  I'm running the NCLEX - RN 4000 and get the error message:

  The 'Microsoft.Jet.OLEDB.4.0 provider is not registered on the local computer.

  Someone at - it a link that will allow me to view the program NCLEX - RN 4000 that I installed on my laptop?

  Take a look on...

  http://social.technet.Microsoft.com/forums/en-us/w7itproappcompat/thread/17efa13d-2d16-4F1D-9EA1-302b7a054ecf

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• PC migration - converter could not connect to the remote computer. A general error occurred: unknown internal error

  Hello

  I am brand new to fusion m v so forgive me if I miss useful information of the first post time around.

  I try to use migrate your PC, feature of VM Fusion 8 but I see the error in the title of the topic when I try to start the import operation.

  I have disabled the firewall on the PC and MAC

  I tried over ethernet and direct connections

  When I run the migration of PC Windows tool, he complains that UAC is enabled even if it is not (confirmed via Control Panel and evolution via the command prompt)

  When you try to migrate, it accepts the PIN and then shows a warning on this certificate, that I choose to browse

  He will then ask admin username/pass on the PC (I tried my only regular and also tried setting a new admin user and try this)

  After that, I see the error: the migration of PC - Converter could not connect to the remote computer. A general error occurred: unknown internal error

  Should I keep trying to get this working, or that it will be more easy to find a way less direct to turn the PC to a virtual machine on the Mac?

  I found the logs on mac and have posted what I think is the appropriate one below, but not really sure:

  LOGS *.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Log for USB VMware pid = 3550 Arbitration Service version 12.1.0 = Build = build-3272237 option = output

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: The process is 64-bit.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host codepage = UTF-8 encoding = UTF-8

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host is Mac OS X 10.10.5 (14F1713), Darwin 14.5.0

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: VTHREAD initialize main thread 3 'usbArb' tid 119357

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: could not open the file "/ Library/Preferences/VMware Fusion/config ': no such file or directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file found in/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / settings ": not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file not found at/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / config ': not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preferences optional PREF file not found in/dev/null/Non-existing DEFAULT_LIBDIRECTORY / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: DictionaryLoad: could not open the file "/ var/root/Library/Preferences/VMware Fusion / config ': no such file or directory.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Preferences optional PREF file not found in/var/root/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Deactivation of the preferences of the user PREF because disableUserPreferences is set.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: PREF cannot load the user's preferences.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - PARAMETERS GLOBAL/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - NON PERSISTENT

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - USER PREFERENCES

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - default USER IS/var/root / Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - HOST by default IS/Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - SITE by default IS/dev/null/Non-existing DEFAULT_LIBDIRECTORY/config

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: USBArbRuleStore: loading rules of "/ Library/Application Support/VMware/usbarb.rules".

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: VMware USB Arbitration Service Version 15.1.7

  2016 04-21 T 11: 12:50.091Z | machPoll | I125: VTHREAD beginning thread 4 'machPoll' tid 119359

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: trying to connect to an arbitrator on/var/run/vmware/usbarbitrator-socket.

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET create new socket, connect to/var/run/vmware/usbarbitrator-socket

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET connection failed, error 2: no such file or directory

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: unable to connect to the existing arbitrator.

  2016 04-21 T 11: 12:50.398Z | usbArb | I125: USBArb: UsbArbPipeConnected: connected to the customer, outlet: 4

  2016 04-21 T 11: 12:50.399Z | usbArb | I125: USBArb: 3450 Client connected (version: 7)

  Well well just in case someone found this one in the future, the question turns out to be that my PC has been joined to a domain, but I was connected to a local account. I solved the problem by leaving the field. There may be other ways to work around this problem.

• When I installed for the first time the creative cloud I did not fit into the second computer and now I don't know how to do this. Can someone help me?

  When I installed creative cloud for the first time I was not installed in the second computer and now I don't know how to do this. Can someone help me?

  Hello

  Please refer to the help documents below to download the application Adobe CC:

  Creative cloud to desktop

  Download, install, update or uninstall applications

  Kind regards

  Sheena

  Moving to the cloud creative download & install