How to configure the secondary monitor to be a principal?

Similar Questions

• How to configure the agent to monitor performance only the vcenter vmware and esx, not need to monitor virtual machines

  How to configure the agent to monitor performance only the vcenter vmware and esx, not need to monitor virtual machines

  This is not possible with the way in which we collect information.

• Tecra M5: How auto to activate the secondary monitor?

  Hello

  When I my Tecra M5 with full-screen dock and turn it on, I would like that it allows to automatically activate the secondary monitor and set it on the primary monitor. Currently, when home he doesn't - and I have to manually enable the second monitor and place it in the primary.

  Any ideas?

  Thank you
  Fraser

  Hi Fraser

  As far as I know it of not possible to set the external monitor as the main screen on startup.
  But what the graphics card is installed on your laptop?
  On the Toshiba site I found a new version of the Intel display driver.
  But is it possible to automatically activate the external display and set it to the main monitor without using the docking station?

• How to view Subvi on the secondary monitor with remote panels?

  I try to have a Subvi, called from a VI hand open on a secondary monitor.  I use panels remote to control my main application, which is open in a web browser on the secondary monitor.  I tried to adjust the monitor properties VI - Position of the immediate window - to '1' and also tried to set this value programmatically by using the node property of front panel, but doesn't seem to work.  My Subvi always appears on my primary monitor.

  I use LV 8.6.1 RT and my application is running on a CRIO.

  I'd appreciate any help.

  Thank you

  Dan

  
  

• 10 Firefox: Bookmarks Menu sparkles and is unusable on the secondary monitor

  After the upgrade to Firefox 10, the menu of bookmarks (and other features of the user interface) began to blink when selected. This only happens on my secondary monitor. It does not affect my main monitor. It makes Firefox unusable on the secondary monitor.

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver.

  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers

• Notepad opens off screen on the secondary monitor

  Hello

  Please bear with me as I'm NOT a Windows person - I usually run Macs. but I'm back to my parents and it's their Windows box.

  They are running XP Home SP3. This problem affects all user accounts.

  Basically they run a 2 monitor setup - a LCD, a somewhat old (although still perfectly!) Dell CRT reference. The question is about the latter.

  Note, I asked my father and he assures me that no applications have been installed since he first noticed this problem. I tried to solve problems better than I can, but I don't have Macs, Windows!

  Basically, the notebook want to open on the secondary monitor (running its native resolution of 1024 x 768) completely off the screen (to minimize it, maximize, and close buttons are unavailable). The only way I found to fix it is to reduce the resolution of 600 x 800 and then back to native, but he is a bit of a PITA bread as she has to do every time. As far as I know, the notebook is the only application affected and no new software--or drivers--have been installed since this question bagan occurring. Windows Update is configured to run automatically, even if I don't remember the last time she did it.

  I'm sure there must be a quick solution, and easy for this question - if someone would just enlighten me as to what it could be!

  Thank you very much

  Sarah

  Please bear with me as I'm NOT a Windows person.

  And I'm not a person dual monitor, so I'm not positive that it works.

  When Notepad opens, there will be a tab in the taskbar. Click on this and select move. Now, use the arrow keys to get to the screen. Close all other windows except this one and use the cursor to drag the message to the format full screen, or any size you want. File | Output and Windows expected to retain the size when you open it again.

  Bruce Hagen MS - MVP [Mail]

• How to configure the network device agent

  I added a network device (router) in the new platform, its not to go for all of the alerts in tool Hyperic. How to configure the network device to get information to the Hyperic server. Do we need to do any configuration of SNMP.
  
  Can someone help me please.

  Hi Cyndhya,

  Do you mean you want to see traps SNMP generated by your device network at HQ? To do this, you need to configure one of the agent HQ to receive traps and configure the network device to send the trap to the agent. Once this operation is complete, you should be able to add the device network platform (you must use the agent HQ for the monitoring network device connection).

  Here is the step by step guide:
  http://support.Hyperic.com/display/DOCSHQ30/agent+SNMP+trap+receiver

  Koffi

• How to use the activity monitor to remove MegaBAckup on my mAc Book PRO?

  How to use the activity monitor to remove MegaBAckup on my mAc Book PRO?

  Download and run MalwareBytes. Malwarebytes was developed by one of our colleagues here to ASC. He received rave reviews and is on the more proven anti-malware for Mac software.

• Safari opens on the secondary monitor

  I have two monitors 27 "and Safari insists on opening on the secondary monitor, no matter what I do. All this experience and have you been able to solve it?

  Whenever it happened, it was because I dragged a window or a tab there.  At one point, I closed Safari.  Then when I opened it again, he would open the 2nd monitor.

  What I did:

  When Safari opens on the screen 'wrong', enter a tab open and drag it to the other monitor, then let go.  You should have Safari open on both monitors.  You must also have a menu bar of Safari on both monitors.  Open the window on the monitor that you don't want Safari to open with.  The Menu, file, close this window (command-W).  You should now have that a single Safari window open on the monitor of your choice.  Go menu, Safari, quit Safari.  Then try to reopen the Safari.  It should open on the screen of your choice.

  I can't find a setting for the default screen for Safari.

  If this happens again, make sure the last window you are closing is on the screen of your choice.

  I hope this helps!  Let us know...

• How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Hi stuckfree,

  The question you posted would be more appropriate on the TechNet Forums. I would recommend posting your request here.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• How to configure the router Linksys DD - WRT for WVC54GCA E4200

  I don't know how to configure the router Linksys DD - WRT for WVC54GCA E4200. DD - WRT is very complcated. Help, please! Also, I used the TZO.com to the DDNS. Can I set up the DDNS for DD - WRT router? I used the DDNS to my old model router before. Thank you.

  I followed the TZO supporter last night. I can watch my WVC54GCA outside. All solution links:

  http://tzodns.com/support/tutorials/188

  http://tzodns.com/support/tutorials/190

  Hi Majekho,

  Your domain name has decided to 99.245.xx.x. If you go to www.test.tzo.com from the location of the host, you must see this IP address. If these numbers are the same, then all with TZO works correctly. I guess that it is a simple problem with ports (80, 1024) is not open in the router and forwarded to the right internal IP address of the device (for example. 192.168.1.xxx).

  In addition, if you have a DSL, you will need to call your ISP and ask them to show you how to put your modem in "bridge mode". This will disable the firewall in the modem that blocks incoming connections even if you open ports in your router.
  In addition, during the test, it is best to test on your device remotely, this is due to a common problem called loopback with most routers. For more information about looping, take a look at:

  http://helpdesk.TZO.com/cgi-bin/KB.cgi?view=140

• How to configure the settings of mail on HP Laserjet Enterprise 500 color MFP M575 printer/scanner?

  How to configure the settings of mail on HP Laserjet Enterprise 500 color MFP M575 printer/scanner?  The Office has 5 staff members each with ending with [email protected] for example e-mail addresses.  We have also created an email for option analysis as [email protected] (not sure if creating an e-mail address for the scan option is required).  We are not part of any domain, and there is no server in the office.  When you try to configure the email on the printer/scanner control panel it asks the host name.

  What host name that I can use?

  If you try to configure the browser by using the IP address of the printer, he asks as the SMTP server. The MS Outlook 2010 all our emails use mail.junior - albania.org incoming mail server and outgoing.  Other settings in MS Outlook 2010 are box My outgoing server (SMTP) requires authentication checked and use the same settings as my mail server entering selected.  On the Advanced tab: incoming server (Pop3): 110 (SSL encryption is not checked) and outgoing (SMTP) server: 465 use the type of encrypted connection (SSL) following.

  What server SMTP should I use in this case?

  I would appreciate your help in the configuration of the HP printer/Scanner for scanning and sending by electronic mail to the members of the office staff email addresses.

  Thank you...

  I'll link you to the product page with several documents which I hope will help you to configure your e-mail settings. Please look through them and see which ones fit your needs:

  Scan and send (e-mail, send to folder, digital sending, etc..)

  Here is another site that has some videos that will guide you through the entire upward (here I would try everything first )

  Simulations of MFP - digital send

  If these don't work, please let me know and I will continue to search it for you.

• my windows pc very experience 1, I am embarressed to admit that I can not understand how to configure the windows/outlook e-mail system. This pop and smtp or what ever Q was, I still can't understand.

  I'm unable to set up Outlook, or now called windows mail, I think. but for the life of me I do not understand how to configure the e-mail program that comes with now it windows Vista 64 that came on my new pc.  can someone please?  Thank you

  Windows Mail is/was not Outlook.

  Windows XP e-mail program called Outlook Express.

  Outlook is a part of the office.

  Windows Mail in Vista is the replacement of e-mail for Outlook Express (XP) program.

  Read this section on how to set up Windows Mail in Vista:

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• My IP security camera is different my network ip address, how to configure the camera to match the ip address with the router cable time Wörner

  Please someone help me configure my camera IPsecurity model m12 mobotix ag. It allows to work in the corporate network, but they close down and I didn't bring the camera House but there different IP address of my network and I don't know how to configure the camera to have the same IP address with my home router to TWC, thanks

  Router connections by opening network, in the Panel control, search for the router / properties, enter its configuration

  data in the boxes provided, you will get on the router, a sticker shows data. If lost or deleted, go to its Web

  for the data. Also, perhaps the home page of IP camera offers software/drivers.