How to configure the touchpad and mouse UBD separately?

Similar Questions

• Satellite Pro L550-199: how to configure the touchpad + activate WLan in Win 8.1

  Hello

  I can't find any driver as Windows 8.1.
  Is not so bad, if I have an idea, how I can turn on and turn off the WLAN (FN + F8 key) module and how do I configure the touchpad.

  I would like to disable the click of the surface of the Panel.
  Click on should only be mouse button "" on the touchpad.

  Cheers, Mike

  Hello

  _Touchpad options: _
  Press Windows + X
  Then choose Control Panel. Then click on mouse.
  Here you change to the device settings tab
  Click on the settings button and you will get the settings of the Synaptics touchpad where you can change all the options.

  _WLan on / ignore
  Press Windows + C
  Charm bar click on laptop-> network settings

• How to configure the local and logging remotely using the host profiles, not with advance options

  Help, please

  Hello

  Local and remote syslog feature can be configured for a cluster of similar hosts using the host profiles.

  For more information, see guide installation and Set Up Syslog of the section of the Interface of host profiles in vSphere Installation.

  Connect the Server vCenter by using the vSphere Client.

  Click home.

  Under the administration section, click host profiles.

  Create a new profile or modify an existing profile.

  In the Edit Profile dialog box, set one or more of the five configuration options.

  If you configured using esxcli or advanced syslog configuration options and this has captured a host of reference, 5 configuration options are already visible in the Advanced Configuration option section.

  If syslog has not been previously configured, right-click the section of Advanced Configuration options and add a profile for each of the five configuration options.

  Save the profile and assign it to the hosts.

  For more information please see the documentation Center: (Documentation Centre of vSphere 5.5 )

• Qosmio X 300 - touchpad and mouse do not work

  After that I was recently reinstall antivirus, something was wrong here and at some point cursor stopped on the screen without moving. Touchpad or mouse worked. I tried to restart the laptop several times... but the result was the same - keyboard worked, but the touchpad and mouse not. Although I'm not an expert in using only the keyboard I managed to open the control panel-> devices (where I can see the marks of attention in front of pointing device (I guess that its touchpad) and mouse.)

  The problem is that the keyboard works I don't know how pointer on them to restart drivers for them or something like that. The problem may seem stupid, but I really beg for help or advice because I am currently overseas and can not bring my laptop to any service.

  Hello

  I recommend the touchpad power feature.
  You can enable and disable the touchpad by pressing FN + F9

  Does the touchpad?

  It would also be possible that your system is confused until so you can try to put the OS up to this early time.

  Click on start-> all programs-> Accessories-> system-> system restore tools

  Then you should be able to restore the operating system

• I use a mouse in my Windows 7 laptop. How to disable the touchpad pointing device?

  I always use my mouse to my Windows 7 laptop.  I don't want the touchpad pointing device as my fingers touch when writing and everything spoil.  How to disable the touchpad pointing device? Thank you

  What is the brand and model of your laptop? What version of Windows 7?

  Many laptops have a key that will enable/disable the touchpad - mine is on the top row of keys where the function keys.

  You could also open mouse in Control Panel and look for an option here.

  I hope this helps.

• Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Hi stuckfree,

  The question you posted would be more appropriate on the TechNet Forums. I would recommend posting your request here.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• How to DISABLE the touchpad on my laptop to use a mouse instead

  I had to reformat my computer Dell Inspiron 1545 (64-bit) and installed Microsoft Office 2010. I have a serious problem when you type in will I suddenly find I type in a place far behind the cursor. I thought that this is because I use a standard mouse operated by hand and not the touchpad in the laptop itself. I am told the only way to solve this problem is to turn off or disable the touchpad when mouse is used.

  All efforts to find the way to do this have failed. Can you please specify? Dell has become so elusive and inexplicable, it seems totally oblivious to the real problems associated with this product - a classic case of supplier having lost interest in his clients. All THREE so-called solution have no effect on my keyboard. To the right of F12 key ejects the CD. F3 provides details on the battery and Fn + F1 does nothing - in other words there is no change at all.
  I don't think that Dell or Microsoft has an idea of what the problems--and care even less!
  L Kriel
  The response so far is not working.

  Disable or enable the touchpad by using the access key
  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=424135

• Receive message "Please wait while windows configures the status" and then "the component that you are trying to use is on a CD Rom, please insert". I don't have the CD. How can I stop this?

  Windows Setup status

  Whenever I start my computer, I get a series of pop-up boxes that talk about "Please wait while windows configures the State" and then the one that says "the component that you are trying to use is on a CD Rom, please insert".  I have no idea what it is, and I have no disc to put on this line?  If I hit the buttons cancel these boxes enough times to go, but it's annoying and there is notihing badly with the operation of the computer, after I get rid of the boxes.  No idea how to stop this from happening again?  I did all the steps that have been mentioned earlier and no results.  I even did a system recovery.  I don't know what to delete.  Please help thanks

  Hello

  These messages usually mean that you have a problem with the HP printing software

  Contact HP

  http://welcome.HP.com/country/us/en/contact_us.html

  Contact HP options at the link above.

  http://h30434.www3.HP.com/

  HP's Support Forums at the link above.

• How to configure the agent to monitor performance only the vcenter vmware and esx, not need to monitor virtual machines

  How to configure the agent to monitor performance only the vcenter vmware and esx, not need to monitor virtual machines

  This is not possible with the way in which we collect information.

• How to add images to my table and how to configure the Web site? Help, please

  I do not understand how to configure the Web site and add images to a table and make hyperlinks.

  First, set the folder of your Local Site saying DW where to save the files on your local hard drive.  Go to Site > new Site.

  I think it is easier to start with a page layout predefined by using one of the appropriate templates to bootstrap that comes with DW.

  Go to file > new > (Starter models > models Bootstrap). Select one:

  • Bootstrap-Agency
  • Bootstrap-eCommerce
  • Bootstrap-Portfolio
  • Bootstrap-product
  • Bootstrap-real estate
  • Bootstrap-curriculum vitae

  Press the button create.

  For pictures, go to insert > Image. Select an image and save it in the folder of your local site.

  Nancy O.

• How to configure the e-mail address of the form home and contact me form

  How to configure the e-mail address of the form at home and contact me form. I got two WARNING when exporting my muse as HTML file

  Muse will give the alert message if the e-mail address used is not on the same domain as hosting many platforms is not supports the emails from the external domain.

  You can check with your accommodation, where they take over other emails from field so it will not be a problem and you can ignore the warning message.

  Thank you

  Sanjit

• How to configure the size of the symbol % (width and height)

  How to configure the size of the symbol % (width and height)

  shoud you have your symbol in % and also your image in % file, when you have changed both of the theme to % then your image will change as expected.

  and if you want to make your image immutable able and set the position that you need to change your % step also

  I made some photos to show you...

  

  

  

  

• my windows pc very experience 1, I am embarressed to admit that I can not understand how to configure the windows/outlook e-mail system. This pop and smtp or what ever Q was, I still can't understand.

  I'm unable to set up Outlook, or now called windows mail, I think. but for the life of me I do not understand how to configure the e-mail program that comes with now it windows Vista 64 that came on my new pc.  can someone please?  Thank you

  Windows Mail is/was not Outlook.

  Windows XP e-mail program called Outlook Express.

  Outlook is a part of the office.

  Windows Mail in Vista is the replacement of e-mail for Outlook Express (XP) program.

  Read this section on how to set up Windows Mail in Vista:

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• How to disable the touchpad in windows 8 - Pavilion g6

  How to disable the touchpad in windows 8 - Pavilion g6

  Welcome to the forum, Sally.

  There are several ways to do this - method you choose may depend on what you need to accomplish.

  Follow a few ideas.

  • A double tap farm in the upper left corner of the touch pad if it off for a single session.

  Enable / disable

  Control Panel > display icon > mouse > Settings of TouchPad > click on "enable TouchPad.

  They continue parameters to install and configure the TouchPad as you like it...

  ==========================================================================

  A method that works with the pilots 'old', it is a failure of session by session...

  Make sure this setting is ON / CHECKED:

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  () repeat) TouchPad settings (button) > click tapping >

  Click the shimmering blue wheel

  In "box to Disable TouchPad settings".

  CHECK "Double Tap to activate / disable the TouchPad.

  In the 'Action in the upper left'

  CHECK "Disable the TouchPad during a session.

  Close

  Ok

  
  NOTE that, if it is available on your version, you can select to "turn off the TouchPad" - that's fine, unless something goes wrong.  You could get stuck without your USB mouse AND no way to return to the setting to activate the touchpad.  I don't know if I would use this setting.

  ======================================================================================

  Next...
  Latest drivers (V16.x) have the ability to disable the TouchPad / click on the keypad with a setting on the main page 'Settings' when a USB mouse is used.  This is a very nice feature.

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  CHECK "disable the pointing device internal when the external USB pointing device is attached.

  If you want to be alerted and see a visual cue of disability >

  TICK "Animated icon in the taskbar" >

  and make sure you have your updated task bar notifications so you can see the view of the mouse.

  

  =====================================================

  I hope this helps!

• How to disable the touchpad disabled?

  I just got this laptop and it's driving crazy me.

  I tap on the touchpad, and I touched the area where you can disable the touchpad about 1,000 times a day. No matter if I do what he says, I can't that faucet back on.

  I press the windows on my KB.  Type mouse into the search bar.  Tab and then arrow key over to reactivate and it's driving me crazy! I use this for business, but also personal use.

  I see you where you can disable the touchpad, I don't want that.  I want to disable the zone of the touchpad where you tap enable and disable.  It is a defect of design for me.

  Thanks for any help that can be provided.

  Hello stillrivers,

  I see you are having a problem with the touchpad does not disable. Did you by chance a look at the post which explains how to disable the touchpad?

  If you do not have by chance I'll re-post the answer here:

  To do this...

  Go to the control panel.

  ·         Go to mouse properties windows and click on device settings

  ·         Highlight the Synaptic Touchpad and click settings

  ·         In the properties of Synaptic Touchpad Windows on the left and the Panel you will see Touchpad Disable Zone, click it.

  ·         Uncheck the box 'double-tap to activate or disable the Touchpad'

  ·         Click OK

  

  If this does not work by chance, let me know. Also, if you have any questions please ask me.

  THX