Satellite Pro L550-199: how to configure the touchpad + activate WLan in Win 8.1

Similar Questions

• Satellite Pro A100 PSAASE: How to get the FN keys work in Win XP

  Hey,.

  I bought the PSAASE Satellite Pro A100-00H004GR and killed Win Vista. Now it's Windows XP Pro!

  There is no Win XP Modem drivers on the Toshiba Page for this model, but I solved this problem by myself.
  But now my Fn keys/keyboard shortcut does not work and I have no idea what to do. I've tried Hotkey utility of the other models, but it does not work.

  No idea what to do now?

  Full Support of driver for each model would be great...

  Thank you
  Marc

  Hi I found the usefulness of Toshiba Satellite Pro A100 PSAA3 shortcut keys.
  It is not the same series, but try to install it. Maybe it will work!

  Don t forget to also install the common Modules

• Can Satellite Pro M70-199 (PSM76E) - I upgrade the hardware

  Satellite Pro M70-199: PSM76E

  How can I PUT it? (HW)

  All you can do is upgrade the RAM and HARD drive.
  If you need more space on the HARD disk, you can upgrade the HARD drive. This should t be a problem.
  The RAM can be upgraded to max 2 GB using memory DDR2 PC2-4200

  The CPU or the graphics card update is not possible.

  Concerning

• Satellite Pro L550 - 17U PSLW9E - question of the HARD Win 7 64 bit disk recovery

  Hello

  Basically, when I got the laptop it had Windows 7 Home Premium 64 - bit installed.
  I created the backup disks, as asked it the first got scratched and gets stuck on the installation, I can install the 32-bit version (the CD it came with) and I tried to create a new 32-bit system recovery disk but it creates just a 32 bit recovery disc (which I already had the appropriate drive).

  Just to see if there is a way to restore the 64-bit system without having to buy a new version of windows?

  Satellite Pro L550-17U
  Part number: PSLW9E-01500MEN
  Windows® 7 Home Premium 64-bit authentic (pre-installed, Toshiba-HDD recovery) and
  Genuine Windows® 7 Home Premium 32-bit (Toshiba-Recovery DVD)

  Hello

  You reinstalled the operating system using the Toshiba Recovery disk which contained the Win 7 32-bit operating system. The recovery of 32 bit Win7 has formatted the whole HARD disk and has deleted all partitions (recovery partition HARD drive containing too many Win 7 64 bit OS)! and replaced with Win 7 32 bit.
  This means that Win 7 64 bit is no longer available on the HARD disk.

  In my opinion, there is nothing to do you will need to order new Win 7 64 bit recovery disc.

  Welcome them

• Satellite Pro A120-154 - how to remove the HARD drive password?

  Hello

  I have the following problem: I set a password for the HARD drive in my old Satellite Pro A120-154 years ago, and now I want to remove or change the passowrd since I'll give you this laptop for my nephew. Instead I don't know the password, I am not able to change or remove, not with the password of Toshiba uitility program and not with the BIOS set up.

  Further I can't find any info on this in the user manual. How can I do this?

  Thanks Tino

  Hello

  I found several useful documents from Toshiba on HARD drive password. Please take some time and pick up some info on HARD drive password and how it works.

  http://APS2.toshiba-tro.de/KB0/FAQ9202JG0000R01.htm
  http://APS2.toshiba-tro.de/KB0/TSB6B01MC000CR01.htm
  http://APS2.toshiba-tro.de/KB0/FAQ9401AR0000R01.htm

• Satellite Pro S500-14Z - how to access the BIOS?

  Hello

  on the Satellite Pro S500-14Z I can´t access the BIOS via F2 and can´t change the bootpriority through F12. By pressing F2 or F12 during startup, the S500 beeps and restarts. When you first start, I had access to the Bios and set the password and active supervisor module TPM. Since I have no access to the BIOS before Windows starts. Is there another key to access bios (I tried ESC, DEL, F1, INS) or how can I change the pw supervisor (I know my real password!) and disable the TPM?

  Thank you
  Karl

  Hi karlS_1,

  Normally you can access the BIOS if you press F2 before Windows starts. It works with an external keyboard?

  You can change some settings in the BIOS using Toshiba HWsetup. This tool is preinstalled on your laptop and you can change the order of boot with this tool.

• Satellite Pro S500-10F: how to disable the fingerprint reader

  We just purchased a portable Satellite Pro S500-10 which has the fingerprint reader. Does anyone know how we can disable this facility of the laptop, we do not remove program only disable the installation.

  Thank you

  You can disable it in Device Manager. If it's not ideal, I guess you could send the laptop to an ASP to have the fingerprint reader physically disconnected.

• Satellite Pro L50 - a: how to replace the memory, HARD drive and battery

  I just uploaded 2 new video from Youtube on the L50 - A. Satellite Pro

  The first is a tear down showing how to replace the memory, hard drive and battery (you can also clean the fan if it detects overheating).

  http://www.YouTube.com/watch?v=IG0lW7t92bI

  BTW why they made it so difficult to get just to the battery in this model?

  WARNING - proceed at your own risk and don't forget static precautions!

  Hope they help and if you have any questions let me know.

  + The message was edited: link has been removed ad channel may not +.

  Thanks for these videos. It may be useful to replace the memory, but I think that the owners of the laptop should not open the case. This may void the warranty.
  Be careful about this.

• Satellite Pro P100-438: how to disable the CapsLock NumLock or Scroll sounds

  Hi out there,.

  How can I disable these "ugly" notification sounds when I press CapsLock NumLock or Scroll?

  It's a Satellite Pro P100-438. Does anyone have any suggestions?

  Thank you

  It's pretty easy mate.

  Follow these steps:

  -Keep right SHIFT> key for about 10 seconds.
  A messagebox will appear (FilterKeys settings) and offer a menu:
  -Click the [settings] button and a new window will appear.
  - Remove the tag [x] of [Use ToggleKeys].
  -Click [OK] to save your changes
  You're done :)

• Satellite Pro C870-172: how to use the Fn keys by pressing the FN key

  I recently bought a Satellite Pro C870-172 and I found that the FN key is used by default.

  I mean that if I need to use the normal F1 or F2 key, I have to press "FN" + F1 or F2 etc... otherwise I get the function of toshiba. which would be fine, but in a lot of technical programs, I need to use the normal F1 F2... touch!

  is there a way to reverse the default system so that when I press the F1 key, I get the F1 function and when I press FN + F1, I get the toshiba service?

  Thank you

  M2

  Yes, go to the BIOS by pressing F2
  Now switch to the Advanced tab, and then open the System Configuration.
  Here you will see the option called: mode of the function (without pressing Fn first) key
  This option should be disabled.

• Satellite Pro M40x-115: how to get the color seen on TV?

  Hello

  I would like to use my laptop (satellite pro M40x-115) as a DVD player. But when I connect my laptop to my TV, I get only a black and white display. I tried to solve this problem by installing the latest driver for my graphics card but it has not changed at all.

  How can I solve this?

  Greetz El Mariachi

  Hello

  Have you checked the graphics settings? The settings of the TV must be set to PAL (most of Europe).
  In addition, you should check your TV device if it s can receive the S-video signal.

  Check this: http://forum.digital-digest.com/showthread.php?t=2353&page=1&pp=15

  Good bye

• Satellite Pro C660-1JL - how to change the language of Windows 7?

  Hello

  I bought Toshiba preinstalled official Windows 7 Professional 64 service Pack 1. And I would like to change the language from German to the Russia.
  In accordance with the instructions of the microsoft home page I could not get the result. MUI Pack does not appear when you are looking for Windows updated (some other updates are available only, but not language pack)...

  What would you recommend how to fix this?
  Its Satellite Pro C660-1JL

  Hey,.

  > I bought Toshiba preinstalled official Windows 7 Professional 64 service Pack 1
  You can change the language on Windows 7 Professional t, this is possible on Windows 7 Enterprise (volume license) and Windows 7 Ultimate edition.

  So if you want another language, buy Windows 7 Ultimate or be happy with the current language of Windows 7 Professional. ;)

• Satellite Pro 6100: Bluetooth - how to connect the mobile phone

  I already have a satellite pro 6100 with the bluetooth software on. I tried to connect to my mobile phone without success. The problem seems to be with the laptop rather than the phone.
  How can I connect successfully. I have to update the new drivers? I bought it refurbished 3 years ago and I'm just getting round to the use of bluetooth!

  Well, the Bluetooth software has been installed on your laptop, BUT the question is:
  Your group has installed Bluetooth card?

  AFAIK the Bluetooth is an option available on this unit. You must check the Device Manager and check the bottom of the unit if the Bluetooth label has been placed.

  I think that you cannot connect your mobile phone because BT is not available.

• Satellite Pro M70-220 - how to start the Advanced Boot Menu

  Which key have to press on my Satellite Pro M70 - 220 starting Win XP, in order to enter the "Advanced Start Menu" - in other words, the menu that gives various boot options, such as safe, last good start Congiguration, start Windows Normal Mode, etc. ?

  On my old laptop Satellite 5105 - S702, it was the F8 key, but by pressing the F8 key on my M70 Pro does not bring up the 'Start Advanced Menu".

  The Advanced Start Menu came on its own a few days previously after an abnormal stop, so it seems that it does not exist on the M70 Pro.

  Thanks for any advice anyone has to offer.

  AlanCB

  Hello

  The Advanced Boot Menu can be reached by pressing the F8 key.
  It s a Windows menu basic and it s any laptop it is.
  It should work on all computers.

  Maybe you can not activate the Start Menu advanced because the Windows operating system is confused upward.

• Satellite Pro U200-10I - how to disable the system at startup control upward?

  : x Hi,.

  I have Toshiba Satellite Pro U200-10I and I want to disable the control system, as it is a long time to start machine. Is there a way to Devil who?

  Nedd your help! : D

  Hello

  Just checking the system do you mean exactly?
  Is this based on Windows or BIOS based?

  If you mean the ScanDisk in Windows startup you can disable it in the registry:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Session Manager
  Change the BootExecute entry to: autocheck autochk *.

  After that restart the ScanDisk is disabled and doesn't appear at Windows startup.