How to configure the VPN LAN to access the internet from the remote network
I have set up for our project site to another Office VPN. Please join.
Now I have already configured Site to site vpn between ASA 5510 and 1841 router.
HQ LAN
10.2.1.0/24 > ASA 5510 1841 > > INTERNET < 1841=""> <> 10.30.3.0/24
^
^
^
^
Call Manager
No. 2851
Now access from branch LAN LAN of HQ each other.
I face problems that are
(1) in the direction of LAN, they can access HQ LAN & resource, but cannot access the internet. I did not configure NAT on the router PH
(2) can I access internet BRANCH LAN via HQ LAN INTERNET. Where can I access the Internet of general management of the LAN of the PH router directly while access to the VPN to the local network of HQ?
(3) in the Site of the Directorate, phone hard cannot work but phone on PC can call to Headquarters. Hard IP phone are same in remote network (172.16.1.0/24 ). What's the problem? How can I configure separately?
Please give advise me how should I do.
Hello
(1) in the direction of LAN, they can access HQ LAN & resource, but cannot access the internet. I did not configure NAT on the router PH
Answer:
You must configure the NAT and crossed to the ASA HQ so that the VPN branch router provides LAN and u-Turn, access to Internet of the SAA. You must first seup NAT for the branch on the SAA router subnet, then you must type the command:
permit same-security-traffic intra-interface
Here's a great example for VPN client hairpining.
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml
(2) can I access internet BRANCH LAN via HQ LAN INTERNET. Where can I access the Internet of general management of the LAN of the PH router directly while access to the VPN to the local network of HQ?
Yes, you can
(3) in the Site of the Directorate, phone hard cannot work but phone on PC can call to Headquarters. Hard IP phone are same in remote network (172.16.1.0/24 ). What's the problem? How can I configure separately?
You must change your subnet VLANS to be different from the subnet HQ voice phone IP VOice VLAn, it should be fine.
Kind regards
Mohamed
Tags: Cisco Security
Similar Questions
-
How to configure the private network interface between two VMS os invited using red hat linux
Hello:
I'm trying to set up a Real Application Cluster on my home office so that I can install Oracle 11 g RAC which is a facility where you have two servers accessing the same shared of storage (chipboard).
In addition they will have a network interface private and a public network interface, so it will be for public interface eth0 and eth1 for interconnection of private networks.
I read that I can set up using VMWare server, create Virtual Machines and install the operating system invited to them.
I intend to install Red Hat Linux guest OS.
My question is basically, how can I do for the establishment of the private network eth1, will be the guest OS to automatically install the sense (do I need to have 2 NIC cards for this), or where and how can this be configured?
Also, how these two speeches of Virtual Machines to another on the private interconnect?
And is it possible to use DHCP or do I need to add the IP addresses manually?
Very grateful for your contribution to this topic, thank you.
Kind regards
Sam
You can have network private without assigning a NIC cards (adapt).
Hope this helps
-
How to configure the remote agent to talk to the server of OLT
Hi all
I just install OAT 12.3.0.1 on Linux server and also install a separate OLT agent on Linux oul5x64
Issues related to the:
How can I configure this agent to communicate with the backend of OLT.
Thanks in advance.
Hello
You must configure a system remotely from the console of OLT (menu Tools, I don't have the GUI in front of me).
You must make sure that your agent is running. There is a script to test the State of the agent.
You must also make sure that the two machines can talk to each other with the same name & IP. BTA is very sensitive to this. Most of the problems of communication between the server from the OLT and agents is due to resolution of bad reputation. Better to day/etc/hosts on both sides with IP & names.
Please give a try and let us know
JB
-
How to configure the remote desktop connection
Original title: home remote desktop connection
trying to desktop connection remote set-up on a spare home computer how I would go all this? my main computer is wired ethernet my spare part is wireless
Hey Shawn,.
Follow the steps in the link to set up a desktop connection remotely on computers.
In addition, through the FAQ for remote desktop connection of
http://Windows.Microsoft.com/en-in/Windows7/Remote-Desktop-connection-frequently-asked-questions
For any questions, have a look on
http://Windows.Microsoft.com/en-in/Windows7/why-can-t-i-connect-using-Remote-Desktop-connection
-
How to configure the host network to pass
Hi all
We do the VLANS on our ESXi hosts and would like to have traffic flows VLAN on our physical network as well. In doing so, I'm curious of what should be the "correct" configuration for the connection between the physical host and the switch. You do you enable trunking ports or leave the port with the default configuration?
Thank you!
-ToTheCloud
You do you enable trunking ports or leave the port with the default configuration?
Assuming that you are talking about Cisco switches, then set up the ports on the switch as junction ports. For other providers, it is named marked ports. In any case, the common name for this is to 802. 1 q (dot1q). Please take a look at http://kb.vmware.com/kb/1004074 for an example of configuration.
André
Post edited by: a.p. - corrected link
-
How to configure the LDAP connector in windows server 2012 R2 Active Directory?
How to configure the LDAP connector in windows server 2012 R2 Active Directory?
Hello
Please post your question in Server TechNet Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?
Hi stuckfree,
The question you posted would be more appropriate on the TechNet Forums. I would recommend posting your request here.
http://social.technet.Microsoft.com/forums/en/itproxpsp/threads
-
How to configure the router Linksys DD - WRT for WVC54GCA E4200
I don't know how to configure the router Linksys DD - WRT for WVC54GCA E4200. DD - WRT is very complcated. Help, please! Also, I used the TZO.com to the DDNS. Can I set up the DDNS for DD - WRT router? I used the DDNS to my old model router before. Thank you.
I followed the TZO supporter last night. I can watch my WVC54GCA outside. All solution links:
http://tzodns.com/support/tutorials/188
http://tzodns.com/support/tutorials/190
Hi Majekho,
Your domain name has decided to 99.245.xx.x. If you go to www.test.tzo.com from the location of the host, you must see this IP address. If these numbers are the same, then all with TZO works correctly. I guess that it is a simple problem with ports (80, 1024) is not open in the router and forwarded to the right internal IP address of the device (for example. 192.168.1.xxx).
In addition, if you have a DSL, you will need to call your ISP and ask them to show you how to put your modem in "bridge mode". This will disable the firewall in the modem that blocks incoming connections even if you open ports in your router.
In addition, during the test, it is best to test on your device remotely, this is due to a common problem called loopback with most routers. For more information about looping, take a look at: -
How to configure the settings of mail on HP Laserjet Enterprise 500 color MFP M575 printer/scanner? The Office has 5 staff members each with ending with [email protected] for example e-mail addresses. We have also created an email for option analysis as [email protected] (not sure if creating an e-mail address for the scan option is required). We are not part of any domain, and there is no server in the office. When you try to configure the email on the printer/scanner control panel it asks the host name.
What host name that I can use?
If you try to configure the browser by using the IP address of the printer, he asks as the SMTP server. The MS Outlook 2010 all our emails use mail.junior - albania.org incoming mail server and outgoing. Other settings in MS Outlook 2010 are box My outgoing server (SMTP) requires authentication checked and use the same settings as my mail server entering selected. On the Advanced tab: incoming server (Pop3): 110 (SSL encryption is not checked) and outgoing (SMTP) server: 465 use the type of encrypted connection (SSL) following.
What server SMTP should I use in this case?
I would appreciate your help in the configuration of the HP printer/Scanner for scanning and sending by electronic mail to the members of the office staff email addresses.
Thank you...
I'll link you to the product page with several documents which I hope will help you to configure your e-mail settings. Please look through them and see which ones fit your needs:
Scan and send (e-mail, send to folder, digital sending, etc..)
Here is another site that has some videos that will guide you through the entire upward (here I would try everything first )
Simulations of MFP - digital send
If these don't work, please let me know and I will continue to search it for you.
-
I'm unable to set up Outlook, or now called windows mail, I think. but for the life of me I do not understand how to configure the e-mail program that comes with now it windows Vista 64 that came on my new pc. can someone please? Thank you
Windows Mail is/was not Outlook.
Windows XP e-mail program called Outlook Express.
Outlook is a part of the office.
Windows Mail in Vista is the replacement of e-mail for Outlook Express (XP) program.
Read this section on how to set up Windows Mail in Vista:
http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/
Link above has an easy to follow Guide to set up Windows Mail.
Contact your ISP (Internet Service Provider).
They offer your broad band/Dial-up connection.
Ask them to:
username
password for your service account to wide band/Dial-Up with themServer of incoming POP3 mail
outgoing mail SMTP serverThe above information is required to set up Windows Mail.
ISPS are usually happy to help you set up your email account.
See you soon.
Mick Murphy - Microsoft partner
-
Please someone help me configure my camera IPsecurity model m12 mobotix ag. It allows to work in the corporate network, but they close down and I didn't bring the camera House but there different IP address of my network and I don't know how to configure the camera to have the same IP address with my home router to TWC, thanks
Router connections by opening network, in the Panel control, search for the router / properties, enter its configuration
data in the boxes provided, you will get on the router, a sticker shows data. If lost or deleted, go to its Web
for the data. Also, perhaps the home page of IP camera offers software/drivers.
-
How to configure the logo screen of handguns to several domain user time?
How to configure the logo screen in time to punch to several domain like domain1\administrator, domain2\administrator and My-PC1\administrator user in windows 2007?
Hello
It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forums. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
For reference:
Hope this information helps.
-
How to configure the agent to monitor performance only the vcenter vmware and esx, not need to monitor virtual machines
This is not possible with the way in which we collect information.
-
Original title: Windows 8 Configuration bluetooth with Kyocera android phone?
Configuration of bluetooth of Windows 8 with Kyocera android phone? I got a laptop with bluetooth Tech. How can I set up a connection and share photos, music & video files?
Hey GQ - Jon'Jon,.
Make sure that Bluetooth is enabled on the computer as well as your Kyocera android phone.
Make sure that the phone is paired with your computer.
For information about how to configure the Bluetooth with Kyocera android phone connection to share photos, music & video files, it would be better if get you in touch with Kyocera phone support for assistance. Please see the support link:
http://www.Kyocera-Wireless.com/support/phone/
Please feel free to respond if you face problems with Windows in the future.
-
How to configure the network adapter when you run ESXi on VmWare workstation?
How to configure the network card installing ESXi on VmWare workstation 6.0.0?
These are the options: I tried bridged, host-only NAP. None of them works
What Miss me? driver or adapater?
I'm running on vmware workstation on Windows 7 with Lenovo laptop.
in the configuration of your virtual machine, the main issue is memory. you gave the 2 GB of RAM, whereas ESXi 6 cannot go forward without minimum 4 GB of RAM.
If please have 4 GB of RAM and re-run Setup. you will get through.
message about the network card should also not appear after that. What kind of network you choose depends on your need.
-
How to add images to my table and how to configure the Web site? Help, please
I do not understand how to configure the Web site and add images to a table and make hyperlinks.
First, set the folder of your Local Site saying DW where to save the files on your local hard drive. Go to Site > new Site.
I think it is easier to start with a page layout predefined by using one of the appropriate templates to bootstrap that comes with DW.
Go to file > new > (Starter models > models Bootstrap). Select one:
- Bootstrap-Agency
- Bootstrap-eCommerce
- Bootstrap-Portfolio
- Bootstrap-product
- Bootstrap-real estate
- Bootstrap-curriculum vitae
Press the button create.
For pictures, go to insert > Image. Select an image and save it in the folder of your local site.
Nancy O.
Maybe you are looking for
-
Thunderbird has worked perfectly on 9/3. This morning all of a sudden I can't send e-mail. The message is: an error occurred while sending mail. The mail server responded: authentication is needed before sending it [R0107005]. Please make sure that y
-
I sincerely doubt why firefox may be interested in changing my user controls in my computer? It's just a question of security only firefox can respond and until then I refuse to change my user controls. Is this right? This has happened Each time Fire
-
Downgrade from Windows Vista to Windows XP Professional
I have windows vista installed on my desktop hp-compaq computer and it started to become unstable, I was tired of troubleshooting and I decided to install windows xp professional because it doesn't have the ability to run windows 7 effectively. Whene
-
Replaces the Probook 4520 s HARD drive. Reinstalling Windows 7?
The hard drive failed on my Probook 4520 s after only 18 months. A Windows disc came with the computer? If this is not the case, how to reinstall Windows when a HARD drive fails? (I know not how to buy and install Windows, I'm more interested in h
-
I have windows vista Home premium. How upgrade to Vista Ultimate in India?
Windows vista Ultimate. I have windows vista Home premium. How upgrade to Vista Ultimate in India?