How to configure two servers presentation on BIEE11G

Similar Questions

• How to configure two programmers process?

  Good day to all! I have Oracle 10 g coupled with PT 8.50.14 and using MFC 9.1 on Windows 7 32-bit. I started with a CRP PSNT, but decided to create a new PRC PSNT2. I designed each CRP to run recurring processes (i.e. purging). Currently I encounters an error with the RTC (master CRP) because it will not perform the recurring process, but the other CRP (PSNT2) works very well. Interesingly enough, until PSNT2 came on the scene, PSNT worked functionally. He produced all of the said duties. Then configure two PRCS to work functionally? Be blessed

  There is a bug with the tools 8.50 and the PSAESRV:

  https://supporthtml.Oracle.com/EP/faces/secure/km/DocumentDisplay.JSPX?ID=1082697.1&h=Y

  This problem was caused by a combination of database bug/problem and a problem of peoplesoft on process on PeopleTools 8.50 and above PSAESRV.

  A workaround for this problem is to disable the separate Application Engine Server. PSADMIN to start and set the desired process, when configuring Scheduler, it will ask you if you want to create separate application engine servers. In this step, you answer with N (no). Here is a comprehensive guide with steps on how to proceed:

  https://supporthtml.Oracle.com/EP/faces/secure/km/DocumentDisplay.JSPX?ID=659343.1

  The impact of this deactivation is minimal and Oracle explains why in this document id:

  https://supporthtml.Oracle.com/EP/faces/secure/km/DocumentDisplay.JSPX?ID=651970.1

• How to configure two relationship of controller (same subnet) area of restraint

  I have two domain controller for the forest of deference (windows 2008 r2 (64-bit) serer how can allows users in one domain to be authenticated by a domain controller in the other domain access resources (Eg: A1 domain can access resources in domain A2 using user name and password of user A1 domain controller account) how can configure the settings of this.)

  Hello

  It is not a Community Forum for this question.

  You should ask in the TechNet forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  no doubt the general Forum.

  Don

• How to configure two USRPs as a MIMO transmitter to transmit the PRS modulated sequences?

  Hello.

  I am transmitting two orthogonal sequences using USRPs with Labview or GNU. The sequences have three levels (+ 1, -1, 0). I thought by using the method of partial response signaling (similar to the BPSK modulation) to modulate their. Is it possible to do?

  Even if you can help me to transmit a modulated signal BPSK or QPSK, using two USRPs conencted with cable MIMO, it will be a huge favor.

  Thank you

  Sam.

  sam2013ni,

  Here is a National Instruments KnowledgeBase article that explains how to use the toolkit modulation of the data defined by the user. Please try using this and see if this is useful.

  http://digital.NI.com/public.nsf/allkb/65790619262D402B86257260000C912D?OpenDocument

• How to configure two windows separated from direct mail on the PC user accounts, each with their own password

  The purpose of running two separate is Windows Live Mail accounts to have total privacy on each, avoiding different users can see other accounts or e-mail folders. I don't want to mix the different user accounts when the opening of windows live mail, each user must be able to open his account separately.

  Thxs

  While this was possible with Outlook and Outlook Express identities as this function is not available with Windows Live Mail as detailed here

  Basically, it says to put in place of the separate accounts for each user to connect to Windows to isolate the e-mail accounts in each of the other opinions.

  On the only other option is to use some use webmail ISP provides you instead of Live Mail.

• Setting up authentication with two servers (not redundant) authentication

  What I'm trying to do is to test a new authentication server, while disturbing is not the service for the current server already in place.

  I would like to test remote access to the network.

  Currently, I use a 5510 ASA that is configured to use a server RSA for authentication.

  I want to configure ASA to also use a RADIUS server for another form of authentication, without impact on the current RSA authentication.

  I found this topic which deals with something similar:

  https://supportforums.Cisco.com/discussion/10849371/two-RADIUS-server-1-...

  but it seems to imply that you can only configure two servers if they use two different protocols, so I think that this would not work in my case?

  Could someone clarify if what I want to do is possible?

  Hello

  You need to change the configuration for remote users.

  You can create another tunnel-group as well as political group and for this tunnel-group, you can use the newly created servers RADIUS group.

  tunnel-group Test-new type remote access
  tunnel-group Test-new general-attributes
  vpn address pool
  Group- Radius-new group authentication server

  authorization-server-group Radius-new group
  accounting-server-group Radius-new group
  default-"new-policy-created" group policy

  When users connect to this tunnel-group, they will be authenticated and authorized against "RADIUS-news-group.

  I hope this helps!

  Kind regards

  Kanwal

  Check if they are useful.

• How to configure the private network interface between two VMS os invited using red hat linux

  Hello:

  I'm trying to set up a Real Application Cluster on my home office so that I can install Oracle 11 g RAC which is a facility where you have two servers accessing the same shared of storage (chipboard).

  In addition they will have a network interface private and a public network interface, so it will be for public interface eth0 and eth1 for interconnection of private networks.

  I read that I can set up using VMWare server, create Virtual Machines and install the operating system invited to them.

  I intend to install Red Hat Linux guest OS.

  My question is basically, how can I do for the establishment of the private network eth1, will be the guest OS to automatically install the sense (do I need to have 2 NIC cards for this), or where and how can this be configured?

  Also, how these two speeches of Virtual Machines to another on the private interconnect?

  And is it possible to use DHCP or do I need to add the IP addresses manually?

  Very grateful for your contribution to this topic, thank you.

  Kind regards

  Sam

  You can have network private without assigning a NIC cards (adapt).

  Hope this helps

• How can I configure two Time Warner Cable Road Runner under Outlook Express e-mail accounts?

  Multiple e-mail accounts

  How can I configure two Time Warner Cable Road Runner under Outlook Express e-mail accounts? I wish I could separate emails for each account, but the access or the other at any time.
  You can use two different identities, or if you want to have access to these accounts in identity, set up your accounts and use message rules to move incoming messages.
   
  First, create a local folder to be used as a second Inbox and name it anything you want.  Use it to one of the accounts, as well as the default Inbox for the other.
   
  Then create a message rule.
   
  Where the message comes from the specified account.
  Move it to the specified folder & stop processing more rules.
  Click: specified account and enter the account name for the second Inbox.
  Click: specified folder and select the folder that you created.
  Name the rule.
   
  Move the rule to the top of the list of rules, and incoming messages will be separated into their respective folders.

• How to configure ESX and vCenter with two areas virtualized?

  Hi all

  I'm quite new to VMware please bare with me, I'll try to get to the point.

  I am building a new infrastructure for a customer which will look something like the image below...

  My questions concern vCenter and the best way to install it and configure it, taking into account the environment below.

  (a) is it possible for vCenter to manage these two areas, even if they are completely separate?

  (b) how to configure the physical server Win 2008 in what concerns an area? If both virtual areas have their own domain controllers is to say 'Live-domain' and 'Test-domain' box Win 2008 won't belong to one, so what do I do with it? I can't join the party to another area because it is not a. And I can't let a working group.

  Any advice would be much appreciated

  

  That sounds right. Yes, the ESX host will meet your virtual domain controller's DNS information. DNS is very important in an active VMware with HA cluster.

  Virtual domain controllers (and, as a result, DNS) are fairly mundane, no worries, I designed / management of environments that were 100% virtual (incudling vCenter).

  Make sure that you do not enable the option "synchronize time with host" on the virtual domain controller VMware tools. Otherwise, you will have a loop (with VM, VM host synchronization synchronizes with host). The option is disabled by default.

• How to connect two databases on two servers

  How to connect two databases on two servers. For example
  a serevr is in India and another in Australia.
  The following example is correct or not
  
  Select A.ID, B.Name [10.50.17.87] .HR. EMP A, [192.168.100.125] .HR. TRANS B
  Where A.ID = B.ID

  You must use a database for this link. The syntax is defined in the reference SQL here: http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/statements_5005.htm#SQLRF01205

• I'm new to Thunderbird. I have a server and e-mail 2 address. How to configure Thunderbird to get two email accounts?

  Help. How to configure Thunderbird to receive both my email accounts that are through a server?

  It seems that it works if you are wanting to have more than one 'account '.

  HOWEVER, I wanted to add a 4th e-mail address 3 I already had and worked very well. That of what I did and voila! It worked. It is the path: Tools-> Options-> Security-> passwords-> Saved going on-> show passwords go there and keep it open while you
  try to send an email from your new address. A message appears saying that password has failed, I had to insert a password. While information appears automatically in the list on the chart you have open. Of course you need to add this new email address to your list first.

• Quick vMotioning problem between two servers HP BL460c Gen 9 when EVC enabled

  I have two HP BL460c Gen 9 blades configured exactly the same thing with 2 x Intel XEON E5-2660 v3 processors in each of them. Both running the same version ROM (I36 06/05/2015) and running the same version of ESXi (5.0.0 build 2509828). They are managed by a Server Build 2656067 vCenter 5.0.0.

  When I configure these two servers in a cluster with EVC disabled I am able to vMotion between them. However, if I activate the Intel EVC modes so I am unable to vMotion between these two identical servers.  Here is an example of the message that I get when I updated Westmere VCA mode

  Host CPU is not compatible with the requirements of the virtual machine to CPUID level 0 x 1 'ecx' register

  Bits of the host: 0000:0010:1001:1000:0010:0010:0000:0011

  Required: x 110: x01x:11 x 1: 1xx0:xx11:xx1x:xxxx:xx11

  Inconsistency detected for these features:

  * General incompatibilities

  If I disable CVS, then I can vMotion VMs between them.

  I wanted to add these hosts to an existing cluster configured with EVC Westmere mode so that I was able to vMotion between old and new guests, but was unable to vMotion VMs off the new hosts, even if I tried to vMotion to another new host.

  Configure a new cluster with only these two new hosts to so I could experiment. I can only vMotion between them if CVS is disabled. I cannot further increase the VCA mode on this new cluster, for example of Westmere to Sandy Bridge then I have virtual machines under tension within the cluster. For example: I put the VCA mode at Westmere, feeding on a virtual computer, when I go to change the CVS to Sandy Bridge mode I get the following message, I should be able to increase the VCA mode but may not lower it

  The cluster cannot be configured with the selected Enhanced vMotion

  Compatibility mode; The CPU features disabled by this mode may be currently in use

  by slot voltage or suspension of the virtual machines in the cluster.

  I get this message even if I try to set the VCA mode at the same level, that it is already.

  Anyone got any ideas on how to solve this problem?

  Hello

  Seems, your CPU supports 5.0 ESXi and vCenter 5.0, you must upgrade your vSphere vSphere 6.x for the VCA.

  See the links below and also compatibility VCA matrix attached:

  VMware KB: Enhanced vMotion compatibility (EVC) support processor

  Intel CPU VCA Matrix (Enhanced VMware vMotion compatibility) | Virten.NET

  

• Is it possible to have two servers for testing in 2014 CC Dreamweaver?

  Hello

  Is it possible to configure Dreamweaver CC 2014 so that there are two remote servers and a test server? I know how to put up with 1 each but I have two servers that are running the same site (for business reasons) live.

  Thanks in advance

  Ben

  Of course - you can add tests and remote servers in a site definition until you are blue in the face. But you can select everyone to be active at a given time.

  To do this, edit your site definition and add the servers under the SERVERS category.

• How to configure vMotion and storage?

  I'm trying to set up with vMotion HA. I can see how the virtual appliance can be moved to another physical server. How to configure storage, so that data are available on the new server?

  Thank you.

  You cannot share your local storage space. That is unless you use a third-party application that turns your local storage space in your storage SAN Lefthands VSA. Think of it like this, you have two servers ESX (ESX1 and ESX2) you have a virtual machine with the disk it's on ESX2. If ESX2 fails, off, etc. it is impossible for the drive be accessible. HA is still based on a shared storage access to the virtual computer files.

• How to configure my Apple Watch for step 2 authentication?

  Of this article, it is unclear how to activate my Apple Watch zu receive 2 step authentication codes. There are no settings on my Apple Watch iCloud, so how do I enable authentication step 2 on my Apple Watch?

  See this - configure your devices to use authentication to two factors - Apple Support. Note, you need to connect, go to settings to iCloud on each device you want active 2FA.

  On the Apple Watch, the only want to disconnect is by disconnecting completely off on the iPhone connected iCloud, and only then can you connect again through the app shows on your iPhone.

  Here is another article to help you with the process as well - http://9to5mac.com/2016/03/22/how-to-enable-two-factor-authentication-on-ios-9-a nd-os-x-el-capitan / #comments

  Hope that helps!