How to configure two USRPs as a MIMO transmitter to transmit the PRS modulated sequences?

Similar Questions

• How to configure two servers presentation on BIEE11G

  Hello world
  
  who knows how to configure two servers presentation on BIEE11G,
  
  I know he can perform on BIEE10G.
  
  If you know please tell me.
  
  Thank you!

  Hi Leo,

  Check it out, http://www.rittmanmead.com/2010/08/oracle-bi-ee-11g-vertical-clustering-fault-tolerance-multiple-bi-servers-in-a-box/

  Kind regards
  DpKa

• How to configure windows 7 pc to allow full access to the xp pc.

  original title: how to configure windows 7 pc to allow full access to the xp pc. Both PCs have been configured for full sharing

  How to configure windows 7 pc to allow full access to the xp pc. Both PCs have been configured for full sharing. Windows 7 pc has full access to the xp pc. However, on xp pc, all readers of windows FP7 can be seen, but access not authorized expect public folders.

  Any suggestions welcome

  Search in the sharing folder entries in a procedure step by step for the creation of a network of Ethernet cable of two computers between Windows 7 and Windows XP with ICS

  You will be able to share files in C:\Users but Windows 7 has special protection on the folder root the C:\ drive and others.

• access to the default in IIS6 and IIS7 Web site, how we configure IIS6 on windows 7 to allow access to the default Web site

  How to configure IIS6 on windows 7 to allow access to the default Web site or there at - there someone out there who can put up my computer at a reasonable rate of legend

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• How can I turn off recognition of face and people in the library module

  How can I turn off recognition of face and people in the library module. I don't know how I turned it on

  Hi Stacy,

  Please click on your name in the upper left corner, and then Pause the face detection.

  Kind regards

  Tanuj

• How to add a profile for a document of speciaty in the print module?

  How to add a profile for a document of speciaty in the print module?

  (1) download the icc profile.

  (2) install the icc profile in the right folder. If you are on Windows is C:\Windows\system32\spool\DRIVERS\color.

  (3) in the book Module / book settings panel click the profile appears, and then select .

  (3) Lr should automatically display the profile in the list, provided that it is a RGB profile. LR is not CMYK and doesn't recognize nor show any CMYK profile.

• How to configure two relationship of controller (same subnet) area of restraint

  I have two domain controller for the forest of deference (windows 2008 r2 (64-bit) serer how can allows users in one domain to be authenticated by a domain controller in the other domain access resources (Eg: A1 domain can access resources in domain A2 using user name and password of user A1 domain controller account) how can configure the settings of this.)

  Hello

  It is not a Community Forum for this question.

  You should ask in the TechNet forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  no doubt the general Forum.

  Don

• How to configure two programmers process?

  Good day to all! I have Oracle 10 g coupled with PT 8.50.14 and using MFC 9.1 on Windows 7 32-bit. I started with a CRP PSNT, but decided to create a new PRC PSNT2. I designed each CRP to run recurring processes (i.e. purging). Currently I encounters an error with the RTC (master CRP) because it will not perform the recurring process, but the other CRP (PSNT2) works very well. Interesingly enough, until PSNT2 came on the scene, PSNT worked functionally. He produced all of the said duties. Then configure two PRCS to work functionally? Be blessed

  There is a bug with the tools 8.50 and the PSAESRV:

  https://supporthtml.Oracle.com/EP/faces/secure/km/DocumentDisplay.JSPX?ID=1082697.1&h=Y

  This problem was caused by a combination of database bug/problem and a problem of peoplesoft on process on PeopleTools 8.50 and above PSAESRV.

  A workaround for this problem is to disable the separate Application Engine Server. PSADMIN to start and set the desired process, when configuring Scheduler, it will ask you if you want to create separate application engine servers. In this step, you answer with N (no). Here is a comprehensive guide with steps on how to proceed:

  https://supporthtml.Oracle.com/EP/faces/secure/km/DocumentDisplay.JSPX?ID=659343.1

  The impact of this deactivation is minimal and Oracle explains why in this document id:

  https://supporthtml.Oracle.com/EP/faces/secure/km/DocumentDisplay.JSPX?ID=651970.1

• How to configure two windows separated from direct mail on the PC user accounts, each with their own password

  The purpose of running two separate is Windows Live Mail accounts to have total privacy on each, avoiding different users can see other accounts or e-mail folders. I don't want to mix the different user accounts when the opening of windows live mail, each user must be able to open his account separately.

  Thxs

  While this was possible with Outlook and Outlook Express identities as this function is not available with Windows Live Mail as detailed here

  Basically, it says to put in place of the separate accounts for each user to connect to Windows to isolate the e-mail accounts in each of the other opinions.

  On the only other option is to use some use webmail ISP provides you instead of Live Mail.

• How to send two requests to separate from OBI and combine the results

  Hi all

  I'm trying to understand how to combine the results of two queries in OBI. Here's the scenario.

  There are three tables, users, security roles however joined a bridge Table Role_User

  Each user has multiple roles, the roles to which a user has access is identified by a column of flag with value T otherwise there F value.

  I am creating an analysis as below

  ID of the user	Access roles	Roles have no access

  Therefore, column 2 shows all roles with indicator T for the particular user and column 2 shows all roles with indicator F for the same user.

  I tried to create two fact tables and using the filter condition on the value of the indicator, but in the analysis, I could use only one at a time. When I add the two columns, I get the error as none of the fact table are compatible with the query request. I would like to hierarchies for dimensions created and assigned in terms of content for all the facts and decreases in intensity.

  Any advice will be highly appreciated.

  Thank you

  Found the solution. I'm posting here in case where someone faced with a similar question.

  I've added the SQL code in the Advanced tab:

  Select A.saw_0 saw_0, A.saw_1 saw_1, B.saw_1 saw_2

  FROM (Select Col1, Col2 FROM Table1 saw_1 saw_0) a LEFT OUTER JOIN

  (Saw_0 select Col1, Col2 saw_1 FROM Table2) B

  on A.saw_0 = B.saw_0

  I created the logic of the facts using the source even with two different filter conditions and were used with a subquery as above

  Ref: OBIEE Interviews: reports

• How to configure Firefox 6 to use a proxy to access the internet?

  Is there something similar in the menu options / advanced which was available in previous versions of Firefox?

  Click the Firefox button > Options > advanced > network > settings. Select "Manual Proxy Configuration" see screenshot.

• How to configure a printer without wire of Canon (MG4150) to the Airport Express

  In my living room, I have a cable modem that is configured in Bridge mode. On the first floor in a room, I installed an Airport Express station. Everything works well except my printer Canon (MG4150) does not work. What is the solution for my problem?

  This Canon printer supports wireless connectivity, should just be configured to connect to the wireless network provided by the AirPort Express. Is not the way you currently put in place?

• How to configure a group of contact by e-mail when the words 'New group contact' do not appear in my toolbar?

  Help Vista says only "click New Contact Group on the toolbar."

  http://www.vista4beginners.com/missing-buttons-from-Windows-contacts-toolbar

  The tutorial above should help you.

  First, launch Windows Contacts. Then click on organize and select Properties.

  

  In the Properties of Contacts window, go to the Customize tab. Here you can choose the type of folder to use for the Windows Contacts. Most likely, it is now changed for all objects, Documents or the music.

  

  Under the text box that says "This file as a template to use", there is a selection area with the elements. Click on it, select Contacts , and then click OK.

  

  Your Windows Contacts toolbar now returns to normal.

  

  http://Windows.Microsoft.com/en-AU/Windows-Vista/managing-your-contacts

  Manage your contacts

  See you soon.

  Mick Murphy - Microsoft partner

• How can I quickly set up and save different views in the develop module?

  Is there a method to switch quicky custom views (including my favorite selections for panels, toolbars, window and Info Overlay bars)?

  In the module 'Development', I would like to move quickly from a psychic (1) all signs, etc. (2) see only my image and the right panel.  There must be a procedure that is better than what I'm doing now (please don't laugh).  I use about six strikes as shown below:

  (a) disable top left and low panels by clicking on each individually,

  (b) press the "t" key to turn off the toolbar,

  (c) the 'f' key to turn off the window two high bars and low bar, and

  d press the combination of keys [Ctrl-i] to disable the overlay of information.

  At other times in the module 'Development', I use about six strikes to turn back on all these hidden objects!

  I use "Lightroom 2.5" with Windows Vista Home Premium.

  Thanks in advance for your help.

  pauldknight wrote:

  I use about six strikes as shown below:

  (a) turn off the top, left and bottom panels by clicking on each one individually...

  You can cut three clicks and two strikes. For all open and displayed, do the following:

  1. Press Ctrl + Shift + F (the shortcut to view > screen Mode > full screen and hide panels).
  2. Press o to hide the toolbar.
  3. Press Ctrl - I disable the Overlay of Info.
  4. Press F8 to turn on the right panel.

  Yes, it's always a pain, but at least it's a little less effort.

  I make very heavy use of the shortcuts F5 - F8 for panels. These are listed for you under window > panels and are much faster than trying to hit the narrow areas of target with the mouse. I use (left panels) of F7 and F8 (right panels) a lot.

  In addition, it is useless really the top panel much if you learn the shortcuts for switching modules, as listed at the bottom of the menu window.

• How to configure WRT54G as a follow-up to my Airport extreme "n".

  I bought a WRT54G version 1 less than 6 months ago.

  Last week I got a Time Capsule from Apple with Airport Extreme 802.11n.

  As the Time Capsule AE "n" will be faster,

  I would use it rather than the main router.

  But how do the WRT54G an extension

  EI?

  basically is there a way I can configure two routers to work

  together and make the best of each?

  Thanks in advance

  Ignore the saber_tooth. It is just repeat everything. If you have a WRT54G web interface is something like this. You have to change the next radio button to disable the DHCP server on the WRT to the ' DHCP server: "leave"Enabled"to"disabled. "

  On the same page, you will also need to change the "local IP address". The default is 192.168.1.1. You must change this IP address to an available inside the Apple LAN address. The LAN on the most convenient airport is set up under the network tab of the Airport utility (at least on Windows version). The standard is to "distribute IP addresses" and "share a single IP address (using DHCP and NAT)" and to use the addressing 10.0.1.1/24.

  You can also view this information on Windows, in a command prompt window by entering "ipconfig". The interesting information is the IP address on the connection to the local network, the subnet mask and the default gateway. On a Mac, type "ifconfig" in a Terminal. Search the en0 interface, which should display the IP address after "inet" and the network mask. You will find the entry door with "netstat - rn". Locate the line of destination 'by default'. It shows the door entry in the second column.

  The subnet mask or network mask is usually 255.255.255.0 or 0xffffff00. With this subnet mask, all IP addresses with the same three digits belong to the same subnet. If you have an IP 10.0.1.123 with subnet mask 255.255.255.0 IP address 10.0.1.1 - 254 belong to the subnet. All IP addresses would be possible. Of course, you can not choose the IP address of the gateway (Airport). I don't know what IP address the airport itself uses by default. If you have any doubts, after the IP address, gateway address and subnet mask that you found on a computer that is connected to the Airport (i.e. The WRT not connected anywhere).