Sync, Iomega EZ media and backup Center Center.

Similar Questions

• IOmegaEZ Media and backup center low transfer Performance files

  HI, I have a 1 TB storage media and Center IOmegaEZ backup.

  The operating system NAS device connected via the ethernet port to home LAN via a router device domestic classic.

  In some cases (frequently) during the transfer of records and files to the storage of any PC on the LAN (through the process of copy/paste in windows Explorer) performance or bandwidth decreases considerably, at levels of 50 Kbps and the process becomes extremely slowly.

  To resolve this situation, I need to restart the IOmega device.

  Because this can happen?

  Thank you

  Facundo Baudino.

  OK, I'll try to disable the media server and upgrade to the latest version of the firmware.

  If the problem persists I will contact you with technical support.

  Thanks again!

  Facundo.

• What to use for the storage media and backup?

  What material and components should I buy if I want to automatically back up our three Macs and watch downloaded (NOT continuous) movies on TV?

  Here is our current configuration:

  -Computers: (Mac Mini, MBP and Air)

  -Router/backup: via TimeCapsule (with our satellite Internet connected to the TimeCapsule via ethernet input)

  -Film/storage media: digital WD hard drive

  -J' have an Apple TV (3rd generation), but we do not use it... cannot

  We currently live in Kenya, where internet speed is not great... so we are unable to stream movies.  Average speed is about 100 Kbps.  Have about 2 TB of movies we watch currently on TV by plugging a portable hard disk into the DVD drive. I know enough that IT is dangerous (e.g. not much!), but need advice on options on a good way to potentially combine these requirements (storage backup and film). Potentially, something like a new RAID drive plugged into a router. RAID drive backups using Time Machine and then also has films on which can be wired (via the USB port? Ethernet to Apple TV 4th Gen to HDMI to TV?) TV to watch movies. Not sure if I need something like Plex media server or something to do, however.

  Thanks much for any help!

  I suggest that you consider a dedicated NAS device. An example would be the Synology DS416.

• Satellite A205 - Vista backup center and restoration with a WiFi hard drive

  I use Vista Ultimate Center of backup and restore to back up hard drive of my laptop Satellite A205 series on a wireless external hard drive. The external hard drive (which is formatted in NTFS) is directly attached (via USB) to my wireless router Belkin low, instead of being connected directly on my laptop.

  I know that this WiFi network hard drive is recognized by my laptop series Satellite A205, because it appears as "Drive Z:" when I click on 'My Computer'... but the version of "Backup and Restore Center" which appeared on my laptop Satellite A205 only allows backup of DVD or directly - connected hard drive not the readers of (strange for a laptop with built-in WiFi) network.

  By contrast, the version of the backup center and restaurant located on my computer to my lists one office (also Vista), drives on the computer at first - but it includes a "more:"hyperlink by which someone with rights Admin can click and access the network drives. "

  This "more:"hyperlink does not appear on the version of the backup center and restore on my laptop Toshiba Satellite 205. "

  I can't even someone at Microsoft to talk to me without first
  $ 69.95 for the 'privilege '.

  Any suggestions?

  Hi irsharp23,

  > but the version of "Backup and Restore Center" which appeared on my Satellite A205 laptop only allows backup of DVD or directly - connected hard drive not the readers of (strange for a laptop with WiFi built-in) network.
  Laughing out loud
  I think that's not a junk Toshiba. Center backup and restore is designed by Microsoft and Toshiba has nothing to do with it. So I think you need to get in touch with the guys at Microsoft to ask for a solution, or there may be an update for this tool.
  Did you check that?

  Moreover, why n t connect the external DRIVE directly to your laptop drive? I don't see a reason to connect such a disc HARD backup over the network, because this image of backup can be used only on your laptop.

  Alternative, I can recommend Acronis True Image to record images of backup on the network or if you use Microsoft SyncToy to synchronize your files between laptops and network. ;)

• How to I put online media and program libuary on the Media Center, I have everything expect those two, they are absent

  online media, absent on the media library

  How to I put online media and program libuary on the Media Center, I have everything expect those two, they are absent

  Check the settings of language and the region under the Control Panel, make sure that it is there.

  You can also try a manual download by pressing 'Download now' tab under tasks > settings > General > automatic download in WMC options.

  Make sure that during this firewall or IPSec is does not interfere with the download.

  If the above does not help then run Setup again.

  [Tasks > settings > General > installation Windows Media Center > rerun him.]

  Make sure you have the latest version of Silverlight or Adobe Flash Player installed.

  S.Sengupta Media Center MVP

• The guide to "Help and Support Center" installed for Windows XP Media Center 2004 is largely outdated and must be updated.

  I have version Dell of Windows Media Center 2005 (service pack 3) installed on my XPS 600 desktop computer.  The installed Help and Support Center guide date for use with Windows Media Center 2004 and has never been updated to include most of the changes system over the past six years. Dell or Microsoft should be responsible for the update of the guides or instructions that are installed on the operating system. Not only that, but Media Center and Movie Maker themselves also grossly neglected as updates are concerned.
  The currently installed Help and Support Center guide is missing details on significant changes to Windows applications and utilities.  I rely on up-to-date information to make changes to my OS applications and utilities.  There is a lot of information in this guide that is incomplete and misleading and therefore not very reliable.
  I have an OEM of Windows XP version and I wonder if there is an update of current or replacement for this system guide and who is responsible for the update.

  Nothing in XP will be updated. The current Windows operating system is Windows 7. XP is already three iterations of the windows behind. A great substitute for the XP search feature (which was never very good) is Agent free Ransack.

  http://www.Mythicsoft.com/agentransack/ MS - MVP - Elephant Boy computers - don't panic!

• I had to do a full (out of the box) system restore. Before that, I did a complete backup of dvd by using Windows backup center and restore...

  Windows Vista 64-bit
  I had to do a full (out of the box) system restore. Before that, I did a complete backup of dvd by using Windows backup center and restore. I'm now trying to restore my files however, I get an error message that says the missing user account... "files that you are restoring have security permissions to a user account that is not found on this computer. The missing account is shown below... Dad-PC\ADMIN."the problem is, that a user account name cannot contain the"------"what to do? Thanks in advance!

  Hello

  at the end of my 1st response is a link to the appropriate forum for these questions

  If you have problems, it's in here is a forum for microsoft at the link specifically for backup questions below

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• "Backup and Restore Center" I cannot access the drive c: for backup

  I'm attmpting to make a backup using the "back up and Restore Center."  On the screen, which asks "which disks do you want to include in the backup?" it shows my C: drive but does not allow me to select.   C: drive is 254.1 GB and nothing 416,7 GB of free space on my external hard drive.  Please let me know my options.

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  "This forum supports questions for the default backup utility in Windows Vista, Server 2008 and beyond."

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Backup center and restoration', 'System', 'Windows Update', 'Power Options' and a few others in Control Panel not responding

  Original title: clicking on but nothing happens

  When I select "backup and Restore Center', 'System', 'Windows Update', 'Power Options' and a few others in Control Panel, nothing happens. Sometimes a window flashes for a split second before disappearing. Any suggestions?

  Hi Ron68PB,

  1. you remember to make changes to the computer before this problem?

  2 are you able to open other programs?

  3. do you get error messages or error codes?

  Method 1:

  You try to run a SFC scan to check the corrupted system files.

  You can read the following article to launch the SFC scan:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Alternatively, you can try to check if the problem occurs in safe mode.

  Check out the link:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer

• Error "Could not load the page" when you click the backup and Restore Center

  Original title: Save reestore center problems

  OK so I need to restore my pc and when I click on the backup center and restoration he always says "Unable to load the page"... . How can I fix

  try to reinstall the backup files if you have a windows disk to use to reinstall or if your computer has windows factory preintalled windows, you could reinstall striehgt from your computer

• Restore data from a CD after format hard drive. Backup and Restore Center.

  I had a virus problem in my system.  I was asked to back up the data before they formatted my hard drive.  I used the backup and restore - 33 CDs Center.  After picking up my computer (they have reinstalled the operating system - Vista), I was unable to restore my data.  When I try to restore it, I get this message "there are no backups available on this computer.

  Hi happythinker321,

  1. How did you create the backup?

  You will need to use the advanced restore feature and check if it works.

  1. open the Center to backup and restore by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click backup and Restore Center.

  2. click on Advanced Restore Options. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on files from a backup made on a different computerand then follow the steps.

  Restore files from a backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Also check if the backup CD contains files whose extension is like. BKF

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer backup button does not appear in the "backup and Restore Center window.

  Hello!

  I've seen some computers that are running Windows Vista Edition home premium 32 y 64 Bits I can't do a "computer backup" in case I have to restore the computer from an Image made by this process because the "Computer backup" button is not in the "backup and Restore Center window.

  As you can see in this link:
  http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx

  You can see 4 buttons, I only see 2:
  -Backup files
  -Restore files

  Y at - it an update that makes these buttons appears in "Backup and Restore Center Window" or is the Version of Windows or of what it is. I find no answer yet.

  Thanks for any help!
  abasilis

  N °

  You have the right version of Vista and there is NO update to change, but you can BUY a Vista Upgrade operating system...

  http://www.Microsoft.com/Windows/Windows-Vista/get/Anytime-Upgrade-overview.aspx

  Upgrade Home Prenium to ultimate.

  http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx

  Explore the features: Windows backup center and restoration

  If you read this link, that it is said that you can NOT make a backup of the computer in Vista Home versions.

  You need 3rd Party software to do this:

  http://www.Acronis.com.au/homecomputing/products/TrueImage/

  See you soon. Mick Murphy - Microsoft partner

• Network and sharing Center (no answer)

  I have been using Vista Home Premium on a laptop Toshiba Satellite. I remember not exactly since when, but lately when I opened the icon ' currently logged in ': l to the taskbar and click on it and open CONNECTIONS current or CONNECT or DISCONNECT or NETWORK AND SHARING CENTER, it freezes: changement. t gave me a lot of problems... Please help... I tried Googling through and used commands like:

  1. net localgroup "Administrators'"NT Authority\Local Service"/ Add

  2. to turn off the automatic setting:
  Run as administrator command prompt.
  Type: "netsh interface tcp set global autotuninglevel = disabled" (without the quotes) and press ENTER.

  You may also need to run this command:
  netsh interface tcp set global rss = off

  To activate the auto adjustment:
  Type: "netsh interface tcp set global autotuninglevel = normal" (without the quotes) and press ENTER.

  To view the current TCP settings:
  Type: press and "netsh interface tcp show global" (without the quotes) to enter.

  I don't even know what they asked me to do, if it is correct or not, but I did and still no solution...: s: s: s

  Any yelp would be appreciated!

  Beppe!

  Nothing is perfect!... .but it should work!

  B3PPE,

  See that article following (http://support.microsoft.com/kb/929833) if it can help you to manually replace the files that SFC could not fix, it also gives you measurements on log file filtering so that only unsuccessful repairs of SFC are listed. Please note that the best source for replacement files would be a sound installation of vista with the functions you want to work.

  I will add to check your hard disk for errors, as corruption SFC could be linked to it. For details, see check your drive for errors .

  Our final recommended option for the problem that you encounter will be a Vista repair install:

  <><><><><><><><><><><><><><>

  You can reinstall your copy of Vista while keeping your files, settings and programs by performing a repair install or a level facility.

  1. Insert the Windows installation disc in your computer's DVD or CD drive. You must start Windows installation while running your existing version of Windows.

  2. on the Install Windows page, click install now.

  3. on the get updates for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. on the Type your product key for activation , we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. on the page Please read the terms of the license , if you accept the license terms, click I accept the terms of the license.

  6. to the which type of installation you want? page, click upgrade to begin the upgrade. You can see a compatibility report.

  7 follow the instructions.

  Note: If your installation disc doesn't include SP1, and you are updated, then you must uninstall it before proceeding with an update install. Start-> Control Panel-> programs-> see installed updates, then select Service Pack for Microsoft Windows and click on Uninstall.

  <><><><><><><><><><><><>

  It is always advisable to backup any and all important data before continuing with the major changes to your system. Please see: methods for backing up your files.

  Always make sure that you have the means to reinstall your programs, or by an installation disc or access to the installation files.

  <><><><><><><><><><><><><><>

  Only a clean installation may shrink toward the low enough differences to isolate what causes this scenario. There are already has with your file system corruptions, we can't go until this is completely isolated. Please let us know if a reinstallation of your operating system is an option for you at this point.

  <><><><><><><><><><><><>

  Report your results so that we can help you. Please use the community support for Microsoft Vista.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Network and sharing Center will not be open in the Panel

  I've been away from home - where I HSI and it works very well - for a few months, I plugged to the network sporadically awireless (sometimes just bad signal), with a lot of frustration.  A few days ago, I went to a place where I could connect to a hard (secure) wireless network and enjoyed the smooth navigation for about an hour.  Later when I tried to connect to the smaller network, unsecure, I couldn't open my network and sharing Center. Whether from the drawer or the Control Panel, a screen opens displaying nothing, but the circle of rotation.  The TASK MANAGER IS REQUIRED to CLOSE THE PAGE - it will not answer the close box. TM shows the centre network and sharing as 'running', although there is no indication on the screen, except the title and the circle of rotation.

  My laptop is a dv6t Pavilion with Windows 7 (64-bit)

  All the other files in the Panel seem to open and operate normally.

  Hello Hamanslayer

  Thanks for posting on the HP Forums!

  I understand the network and sharing Center will not be open. I will do my best to help you! If please launch and center network and sharing, and wait for him so that he can provide an error. In addition, please try to run Centre network and sharing in a different user account. If you don't have one, create one.

  I did some research on this issue. Unfortunately, the only reliable troubleshooting that is remaining, if the above does not help, is to reinstall the operating system. Too, there are different issues that could be causing it. Reinstalling the operating system will focus on each of them.

  First, please save all the files you need. You can find specific steps on how to proceed in the following HP document: backup of files (Windows 7)

  Once this is done, you can safely reinstall the operating system. I'll also give you a document on how to do it: perform a recovery of the system (Windows 7) HP

  Please let me know your results. Thanks again for the display on the HP Forums. Have a great day!

  Mario

• Center network and sharing Center shows "Page failed to load".

  On Windows Vista, Network and Sharing Center comes with a blank page except for text in the middle and says 'The Page impossible to load' steps, I tried:

  Clean boot

  SFC/scannow

  CHKDSK /r

  System Restore (has not only once other succeeded, but does not solve the problem)

  None of them have worked. I have reviewed the SFC newspaper and looked at DLL files, it says could not be fixed and replaced those with well known copies.

  A clean install is not a good option in this case either. My thoughts are that it is a corrupt DLL somewhere or a DLL that has incorrect permissions.

  On another note, I can't connect to wireless networks either. To be more exact, no networks appear in the list (I can connect by typing the SSID manually. The pop-up icon wireless in the status bar indicates "networks are available", but the list shows no. I believe that these two issues are related. Please give suggestions and connents, I appreciate all help.

  Thank you.

  Hello
   
  Do you remember any change to your computer before the problem?
   
  Search for related errors and Event Viewer .

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  You can uninstall the drivers for the network adapters in the Device Manager and reinstall the same.

  To uninstall the wireless device manager,

  1. click on Start , type Device Manager in the start search box and press ENTER.

  2 locate the network adapters and expand the same.

  3. Select the adapter, right click and selectUninstall.

  4 restart the computer, if prompted.

  Pilots should settle automatically after the computer restarts.

  Note: Before uninstalling the drivers from Device Manager, make sure that you have a backup installation files.

  Step 2:

  A. If not help, to create a new user account and check if the problem persists.

  B. Si the problem is resolved in a new user profile, then probably you had a corrupted profile and can be remedied .

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]