How to connect a card?

Similar Questions

• How to connect the card PCMCIA Type II to my Satellite A200?

  I have laptop Satellite A200 - 19L (NEW)

  could you guide me how to connect a (Type II PCMCIA) to my laptop

  I think that this dose of laptop does not support this card.

  Your quick response is needed

  ASEM

  Hello

  If you think that the Satellite A200 does not support this card then, how do you connect this PCMCIA Type II card compatible location is not available?

  As far as I know this unit supports only the location Express Card and the slot PCMCIA not supported!

  :(

• How to connect to the list of the pins for a redeclenchables pulse train

  Hello

  I'm relatively new toDAQmx, especially for the counters. I have problems to determine what pins to plug on the DAQ card. I would like to run the vi described here, but am not sure how to connect the card. I looked at the manual of the X series for the pinout descriptions, but I don't know how they apply to the program on this page. When I connect DOOR a meter, THE, A, B pins, etc.?

  Any input on what to connect or pages that may make how to connect the counters would be very useful.

  Thank you.

  Your most recent post of links to an example more advanced sounding & I recommend that stick you with something simple to start.

  Your first post links to such an an example where the signal of pulse train going out of Ctr0_Out.  Ctr1 is used to make the trigger and the 'break' (enable / disable) Ctr0.  However, much of this stuff is configured using some features of DAQmx such that you don't need to physically connect the pins between the two counters.

  Only physical wiring that you need is to plug your physical digital trigger to the PFI1 signal and connect Ctr0_Out to some external thing must receive them.  As long as your device is called "Dev1", I think this example to work.

  I know there are some docs useful for more general info on the pins meter & behavior, but I don't remember quite so that I have not watched for them for many years.  Meanwhile, here is a * little * bit General description I wrote myself once.

  -Kevin P

• How to connect the cables to an AMD Radeon HD 7450 video card for two monitors individual work?

  I have a HP Pavilion p6-2360eo with the video card Radeon 7450 connected to a monitor of 23xi Pavilion.

  Now, I want to add a monitor of 23xi more, but I do not understand how to connect the cables to the video card to get two logical screen (different views on each monitor)

  Supposedly this monitor can connect to the video card, you have the HDMI connection.  Assuming that the first monitor is connected via DVI, then try a HDMI cable to the second.  I got this from the description of the video card on THIS page.

  Support up to two displays at the same time in these configurations: DVI, HDMI and VGA + HDMI (using the included adapter cable)

• How to connect a simulation on the design of controllers to DAQ card?

  Hi guys... I have problems about control and design on the way to the simulation I just do simulation PID and I can not to connect to the path of the simulation DAQ card in the control design (function)... can someone help me how to connect that?

  

  Ayubi,

  First of all, remember that the control and the Simulation has a PID in the Palette "control and Simulation > Controllers.

  Then, to connect to a data acquisition card, you must use the DAQmx interface is there to connect. In general, National Instruments recommends allows you to deploy a controller a real-time system, but most likely your Windows computer should be good enough for your application. Please see the example of the expedition (in 2013):

  C:\Program Files (x 86) \National Instruments\LabVIEW 2013\examples\Control and Simulation\Simulation\Real - time\DAQmx\RT PXI DAQmx single channel PID.lvproj

  If you don't have a LabVIEW Real - Time (RT), you can simply open the VI:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2013\examples\Control and Simulation\Simulation\Real-time\DAQmx\DAQmx single channel PID.vi

  Remove the shared Variables in the code and he would be executed on a computer with a DAQ card.

  

• How to connect two computers and LAN

  I can't get my toshiba to interface with my desktop computer or to connect to the internet via a CAT5.
  I tried everything I know.

  I'm not too sure about the LAN MAC? He just will not connect even if the device is functioning properly.

  Any ideas?

  Here are the instructions how can connect the two computers.

  -First of all, you will need to disable the firewall.
  -Then you need to set the same workgroup on both computers
  -in the Lan Card Properties-> Protocol TCP/IP settings, you must assign the IP address manually. That is, a computer must use the 192.186.50.1 ip address and the other computer must be set to 192.186.50.2.
  -MAC address is fixed and cannot be changed. Each LAN card uses unique mac address

  After these settings, you must restart the portable computers (computers)

  PS: I recommend Google for details and further instructions.

• How to connect to internet via WiFi network?

  Can someone help me please? I'm desperate to be connected to the internet with my toshiba satellite pro wireless free.
  I had it up and working before but then I lost my connection, I'm normally very good with that sort of thing. Is there a helpful soul out there who could give me a step by step idiots guide how to connect my laptop without cables, etc.

  Any help would be appreciated as I want to use my laptop to its full potential.

  Thank you very much

  Hello

  First of all, you need to know if the wireless network adapter is installed on your laptop or not.
  Also check device manager if the Wlan card driver is installed correctly.
  Then you must configure your WLan router.
  In this case, you should check your manual for the router WLan configuration of this device.

  If you want to connect to the laptop to the router WLan so you must enable the wireless network adapter. Usually the WLan switch on the side of the laptop must be turned on (LIT)
  Then, you go to the WLan antenna with the FN + F8 key combination.

  If everything is on then you should go to network connections, it you have available WLan network properties. Go to wireless networks and select view wireless networks button. You should see your WLan.

  If you have set up the WLan encryption on the router, then you must first set the password to connect to the WLan.

• How to connect 2 screens on a HPE-210y PC?

  How to connect 2 monitors to a HPE-210y PC? I have 2 monitors HP2010i . Behind the PC, there is a VGA - DVI input and an HDMI input. I have connected a monitor to the PC with a VGA - DVI adapter. I saw a VGA input which was covered with a plastic plate "DO NOT REMOVE" black screwed attached. I removed the plate and the second monitor connected.

  The second monitor keeps saying "No Signal" and goes to sleep. I tried the monitor plugs around switching, but I keep getting the same results. Only the monitor connected to the VGA - DVI input works.

  How can I connect two monitors to this PC?

  Thank you

  You must also use the HDMI port. To do this, you need an adapter DVI HDMI and a DVI cable.

  The other VGA port has been covered for a reason, to keep you to try what you did. When a graphics card is used, the video port of the motherboard is disabled.

  See you soon,.

• How to connect 12 '' MacBook (2015) to a 24 "or 27" Apple Cinema Display AND fresh!

  I made this post on my site here: https://underground.net/how-to-connect-an-apple-display-to-a-usb-c-macbook/ (which I will update regularly)

  This installation took me a LONG time to understand, but it works very well, no wake mode 'sleep', etc.

  To connect the new MacBook to a 24″ Cinema Display or Apple 27″ LED Display Monitor (who both have a record which is the same as the Thunderbolt connector, but are not actually screens Thunderbolt) you can opt for a really cheap option, as the following point 3.1 AllSmartLife USB Type C adapter Mini DisplayPort Amazon for $ 20 :

  

  That works very well, but you cannot load your computer when you are connected to the screen, nor can you plug something else on your computer as an external hard drive, etc.

  To be able to recharge your computer AND connect to the screen AND connect other devices to your MacBook, you need the following configuration, and it works great, btw.

  1 first download this USB-C for USB multi-port, Belinda® USB-C for 3 ports USB 3.0 , which is about $ 36 on Amazon.

  

  2 then, you need an expensive element, StarTech.com USB 3.0 to DisplayPort 2560 x 1600 video card Multi monitor external adapter (USB32DPPRO), which is around $74 on Amazon:

  

  3 Finally you need a cheap item, the Cable questions DisplayPort / Mini DisplayPort male to female adapter at $ 9 on Amazon:

  

  Plug all the in such things and he ends up you look pretty clean where it connects to the computer, as you can see below and you can plug in the USB port of the screen on the hub and use the speakers on the screen, AND you still an available for a hard drive, external USB 3.0 port.

  

  It will cost you around $119! Wow, that's a LOT, but it works. Or you can go cheap and just get the first card for $20 but charge your MacBook by disconnecting from time to time to plug in the charger. What a PAIN in the * Apple.

  The new MacBooks coming will be equipped with a combined USB/Thunderbolt-c plug that should * hope * connect a screen and charge at the same time cheaper, but who knows?

  If you want me to your post something, I can put it on the MacBook 2015 using forum boards.

• Qosmio X 770-how to connect a video camera with firewire interface

  Hello

  I want to buy the new QOSMIO X 770.
  I have not found information on firewire.

  The documentation talking about video editing.
  How to connect a camera with firewire?

  No connector, no card expresscard...

  Hello

  You can also use an adapter USB to Firewire which allows you to connect device firewire to USB port of the laptop.
  USB 2.0 is 480 Mbps interface and FireWire is 400 Mbps but interface so, theoretically, USB 2.0 should be faster, but that's not true. Firewire is faster according to some tests. However, there aren't big differences, so I think that the use of this card must function.
  There are various one USB to Firewire adapter on the market. Simple Google.

• Satellite P100: How to connect to internet via WiFi?

  I read a post above that says that the sticker on the bottom of the laptop ' wireless network: no w/l ' means that there are no installed wireless.
  I'm fairly certain that my Satellite P100 has installed. I customized my phone, ensuring that I have added wireless for the school.

  I have an on-off switch for the wireless on the case. Also, when I entered a zone wireless for the first time, a program (Q-Connect) came.
  I reinstalled Windows XP and wonder if it is a software that is missing (which has been the case with other similar programs audio).

  This could be the operator error?
  I don't know anything wireless.
  How to connect to wireless internet?

  Hello

  First, you must be sure that your laptop has WLan card to 100%. Go to the Device Manager and check the network adapters section. If you will see card WLan (intel or atheros) then you unit definitely has the Wlan card.
  To use the WiFi network, you must configure your Wlan router. Consult the manual.
  You must then activate the Wlan switch on the side of the laptop and use the combination FN + F8 to select the WiFi network.

  For the other steps, you can also check this forum wireless. Here you will find a lot of descriptions.

• How to connect satellite Pro L40-15 has to my TV?

  Hello

  I would use the laptop connected to my TV to watch movies. Can be connected using the TV as a monitor and what kind of cable would you use?

  Thank you
  Malc

  To connect the laptop to the TV is very easy. If you look at the user s manuals document you will find exact explanation how proceed.

  If I remember well your laptop should have S-Video output and video signal transfer port, you must use S-video cable. I hope your TV's S-Video IN port. If this isn't the case, you can use different cards.

  Please check this thread and read carefully reading written by Miro. He explained very detailed how to connect the laptop to the TV.

  If you have any other questions please post again.

• Satellite L500-1XZ - how to connect the port adapter or firewire?

  How to connect an adapter or a firewire port? The specifications of my laptop refer to two expansion slots (one for the configuration). Where they are and how to connect a firewire adapter?

  Thanx

  Hey Buddy,

  You can buy a PC Express card with firewire ports to connect your firewire devices. Ask your computer dealer preferred for this, they should be able to sell an expansion card.

  For example, I founded it:
  [LINDY FireWire - 2-port ExpressCard/34 card | http://www.amazon.co.uk/LINDY-FireWire-Card-Port-ExpressCard/dp/B000T5RNZQ/ref=sr_1_3?ie=UTF8&s=electronics&qid=1268765430&sr = 8-3]

• How to connect the Satellite Pro P100 to Hifi

  I've got Satellite Pro P100. How to connect this laptop to stereo
  It's probably easy, but what I can say... Call me stupid.

  I have head that comes out of the headphone jack, it connects to my friendly hifi.
  Ill be there is a unpleasant hissing in the background. Trying to hook up my boys in head mp3 player, and that works very well.

  Any chance of some help... Thank you

  Hello

  To my knowledge, you can connect the satellite Pro P100 to HiFi only via a cable 2 RCA Audio Y adapter. To my knowledge the laptop doesn't support the S/PDIF audio output so you only to use an analog audio port.

  You can also buy a stereo adapter with 2 x cinch sockets to connect the laptop to the stereo. This card can be plugged into the headset jack

  Check this box:
  Stereo adapter

  I think you should visit the nearest dealer of portable. It can show you the right and taken in charge of cables and adapters.

• How to connect by Satellite A100 wireless

  im a beginner here... can someone tell me in simple terms how to connect wireless... my knowledge is limited so be nice thanks a lot

  First of all; are you sure that your laptop supports an internal Wlan card?
  On the other hand; simply activate the WLan switch on the side of books, then use the FN + F8 key combination to select the WiFi network.
  Configure the WLan settings either in windows help or 3 rd party software as Intel ProSet or Atheros WLan Client utility.

  For more information look in the forum ;) there's enough discussion on this topic