How to connect by Satellite A100 wireless

Similar Questions

• How to connect my Satellite A100 to TV?

  I have a Toshiba Satellite A100-285, and I really want to connect it to the TV.
  Can someone tell me what cable I would need to do this?
  We have no pc world or stores like that here.

  Thank you very much.

  Hello

  It's very simple to do. All you need is S-video cable. S-video port is placed on the left side near the I.Link. Please note that this cable can transmit the video signal only.

• Satellite A100 - wireless/network not working not

  Hi all I'm new here and even though I think I know a little about PC I seem to forget that I have learned.

  I have a lappy Satellite A100, which was connected to a home network wireless and worked very well. After travel further using another wireless USB device, I would return home put on wireless and connection obtained immediately.

  On a recent trip to Bali, I discovered that there are free hot spots wireless everywhere, however I had problems with the connection on trying to connect and could hang, past my expertise so went to a guy who has tinkered with Lappy I wss then you connect wherever I went, great, until the return to the House.

  Put on wireless and cannot connect, I tried everything and had to resort to a cable connection.

  I noticed when you use Toshiba cordless tool it is to see the connection to the router, but stops to Lappy with!

  It has been considered a clean install, but this seems drastic.

  * Help please *.

  Using XP or Vista?

  Try this:

  (1) what a reception/interference problem? Try moving the laptop or a Wifi access Point

  (2) download and install the latest wireless drivers from the Web from Toshiba site

  (3) try to disable the Windows Firewall or your 3rd party firewall

  (4) use static IP addresses, instead of using the DHCP (dynamic IP address)

  (5) update the Firmware of your Wifi access Point. (download from the manufacturer's website)

• How to set the Satellite A100-596 to factory without Recovery DVD settings

  I gave my young niece of my old laptop A100-596 for Christmas.
  It worked perfectly on Christmas Eve I packed it upward, in packing of origin, but at the time my niece connected on it has lost 40 GB of data among the drives C and E - everything E drive and the dvd drive had stopped working!

  Now, no one has any explanation for what is happening, nor any reason why a laptop that has performed flawlessly for 18 months would suddenly lose 3/4 of the data on it, but whatever!

  So now I want to restore it to factory, but without a job settings dvd, how? I have all disks involved in perfect condition!
  In addition, I want to fool proof so it can be retrieved in case the person or nothing damaged, this time he cannot repeat the action.

  So I think that if I partition the hard drive so that the recovery of files is accessible by me with a password, which I will NOT share with any of the children, if they bumble once again, then I will be able to recover.

  Moreover, even restoring the system files have disappeared, so I can't even it roll back to a working condition!

  Any advice?

  Hello

  You wrote so much and I think it's the best we descuss all questions slowly.

  I don't know what you mean under non-working DVDs. Is the drive defective optical drive or media DVD is not readable?

  Anyway, the fact is that if you want to have the factory again settings you must install operating system using Toshiba DVD recovery. If you don't have it you can do clean OS installation using the Microsoft DVD facilities. All the necessary drivers, tools and utilities are available on the Toshiba support under http://eu.computers.toshiba-europe.com page > support & downloads.

  When you use recovery media Toshiba HARD whole disc will be erased. Absolutely everything. All data and partitions.
  What you want to do with recovering data unfortunately will not work. You cannot copy the recovery image and start it from the other partitions. Not on Satellite A100.

  On new A300, something like this is possible because the recovery image is stored on the second partition in folder HDDRecovery.

  If you have any other questions please let us know.

• How to change on Satellite A100 HyperMemory?

  I have the Satellite A100-192 with X 1600 Mobility Radeon® graphics adapter & 512 MB of RAM. How can I increase the amount of memory on my graphics card: 256 MB to 512 MB (that is, how can I make use of HyperMemory)?

  Hello

  As much as I know, that you can't do that. The max graphics card memory is set on 256 MB. Question for you: the same situation on desktop, what you can do to have 512 MB graphics card?

  By the way: if I remember right Hyper Threading can be enabled in the BIOS under the Advanced tab settings.

• How to connect by Satellite M30 on TV?

  Hello
  Could someone advise me please how to connect my Toshiba laptop (Satellite M30-304) to a TV?

  Y at - it a specific cable I need to use? Please let me know the details and the brand.

  Thank you
  Knockaert

  Hello

  As far as I know this laptop has a s-video port on the left side of the laptop.
  In this case, you need a cable that supports this port. Also after you connect the laptop to TV, you will need to switch to the television set with the FN + F5 key combination.
  In addition, you will need to choose the right channel of the TV.
  Have you checked the user manual? You will find a complete description.

  Good bye

• How to connect a satellite with Qosmio G30-188 receiver?

  Hello!

  How can I connect a satellite receiver to my Qosmio g30-188? I need to connect the AV signal (SCART) on the receiver to the laptop.
  can someone help me?

  Thanks in advance!

  Hello

  I didn't test it with cable SCART, but I presume that you need adapter SCART to connect to your satellite receiver. Here is the image what it looks like.

  On this map, you can connect S-video cable to transfer the picture to your Qosmio. You will find on the right side for laptop S-video PORT. For sound, you can use the audio cable (red/white) with proper adapter

  As I said I n t test it until now. In any case please check manuals s user document. Maybe, you can find some useful information.

• Unable to connect by Satellite A100 for TV using a cable SCART

  Hello
  Please help me! I'm trying to connect my laptop Toshiba Satellite A 100; Video card from NVIDIA 7600 with my LCD TV Panasonic Viera.
  When I connect it with the cable SCART there is no signal on the TV.

  Maybe my video drivers are not real, but when I download again on the Internet it displays the error message?

  Before that, I was with the old CRT TV-Goldstar I there is no problems.
  Now, I can't change my resolution he remains on 800 x 600 for the second screen and does not find it.

  I hope someone will give me useful advice!

  First check the TV settings in the properties of the nVidia graphics card!
  I put t remember where you go exactly and what settings are important, but you should definitely check out everything in the graphic properties-> advanced.

  In addition, the user manual describes exactly how to connect a TV to the laptop.
  To my knowledge, you must use an s-video cable.

• How to connect the Satellite Pro P100 to Hifi

  I've got Satellite Pro P100. How to connect this laptop to stereo
  It's probably easy, but what I can say... Call me stupid.

  I have head that comes out of the headphone jack, it connects to my friendly hifi.
  Ill be there is a unpleasant hissing in the background. Trying to hook up my boys in head mp3 player, and that works very well.

  Any chance of some help... Thank you

  Hello

  To my knowledge, you can connect the satellite Pro P100 to HiFi only via a cable 2 RCA Audio Y adapter. To my knowledge the laptop doesn't support the S/PDIF audio output so you only to use an analog audio port.

  You can also buy a stereo adapter with 2 x cinch sockets to connect the laptop to the stereo. This card can be plugged into the headset jack

  Check this box:
  Stereo adapter

  I think you should visit the nearest dealer of portable. It can show you the right and taken in charge of cables and adapters.

• Re: Lost - recovery disc how to recover the satellite A100-649 without a disk?

  Can Hi, please someone help? We have lost the disk and need to retrieve Windows on laptop Satellite A100-649.

  Thank you!
  Maggie

  Ilay is right; recovery for A100 disk can be more pronounced due to the age of s for laptop.

  Do as described by Ilay. use a Microsoft disc to install Windows System. The drivers are available for download from the Toshiba driver page.

• How to connect by Satellite Pro A300-1LW to TV - only monitors VGA port available

  I want to connect my Satellite Pro A300 1LW to the TV to watch DVDs and videos on the internet.
  There is only a single VGA output.

  I have this connected to the input VGA on TV (Sony Bravia LCD TV) and it displays the start-up screens such as the BIOS, Windows startup screen password but fails when the user login screen.

  The television then shows a message indicating "signal not supported.
  Adjust the PC output '.

  Is the complete list of available interfaces:

  1 x DC-in
  1 x external monitor (this is the port that I use)
  1 x RJ-11
  1 x RJ-45
  1 x i.Link (IEEE 1394)®
  1 x external microphone
  1 headphone (stereo)
  1 x SP/DIF (optical) shared with headphone jack
  1 x 5-in-1 Bridge Media slot (supports SD ^ TM ^ memory cards up to 16 GB)
  Stick® up to 256 MB, Memory Stick Pro ^ TM ^ up to 2 GB, MultiMedia Card ^ TM ^ to the top
  to 2 GB and xD-Picture Card ^ TM ^ up to 2 GB)
  1 (shared with a USB port) x eSATA
  4 (2 left, 2 right) x USB 2.0 (USB Sleep-and-Charge of support)

  Have you tested when laptop is not connected and that Vista is fully charged?
  I mean start your laptop and wait for Vista to be fully charged. Cannot connect to the TV, then use the FN + F5 key combination to have the image on the TV.

  It works correctly?

• How to connect my Satellite A200 with LCS Philips TV?

  Hi, I have problems to connect my Satellite A200 1E1 with a PF9967D 32 Philips TV LCD HD ready.
  Manuals recommend an HDMI extension that is unfortunately not available with my laptop.

  However, is possible to use an S-Video connection instead? I could accept a lower quality. When I connect the laptop with the TV, I feel that the Satellite doesn't send out any signal. The combination "FN + F5" does not have the ability to switch between screens. Once, I connected a projector and had no problem at all with switching between the video-projector, computer screen or both.

  Any comments would be much appreciated, thank you in advance.

  Hello

  In the user manuals, it is written in almost each of the chapters on ports or machines slot a short comment: depending on the configuration. This means that this s manuals can be used for different laptop A200 models.

  Each laptop comes with optical disc drive HD-DVD also has an HDMI port. According to the specifications of the laptop, your laptop has no ODD of HD - DVD, and because of this, there is also no HDMI port.

  There sonly a S-video to TV-out port. Using this port you can send the video signal to your TV. I have too many LCD TV and I have used it several times with my laptop A200. It's very simple, but make sure you use the right channel (S-Video) on your TV. Using the FN + F5 key combination, you can switch to the TV.

  If this does not work you are doing something wrong.

• How to turn on Satellite A100-847 Intel virtualization technology?

  Is it possible to activate on A100-847 Intel virtualization technology?
  I try to run the VMWare Server to host the 64 bit OS, but it tells me that the VT CPU (T7200) capable but VT is not enabled.
  Is there a reason not to enable this feature of processor?
  It goes the same for the execute bit.

  AFAIK virtualization option, if it is available, you can find in the BIOS settings. I'm not 100% sure, but this option is not available by Satellite A100.

  As you know, it depends on CPU used in the unit (virtualization must be installed in the processor). My Qosmio has this option on the first page in the BIOS settings. I'm no expert of processor, but just to compare, my unit has Intel Core 2 Duo (Merom) processor T7400.

• How to connect by Satellite P300D to LCD TV

  Hello

  I'm new to the forum and hope I'm in the right place.

  I was tearing my hair out trying to connect my Satellite P300D to my LCD TV.
  All connections seem ok and the wallpaper appears on the TV but nothng else

  No slider, icons or anything else from my screen.
  When I click on identify a 2 is displayed on the TV to show he is recognized, but I can't go any further.

  Someone at - it ideas?
  Thank you

  > All connections seem ok and the wallpaper appears on the tv but nothng else,.
  For me, it looks like you have extended the Bureau for the second monitor.
  This means that all the icons will remain on the primary monitor (laptop screen) and you get another screen extended desktop.

  Click view properties, mark the second screen (external monitor) and disable the option; extend my Windows desktop to this monitor.

  Usually, you use only FN + F5 to switch to external monitor

• How to connect by Satellite 5100 via WIFI?

  Hello

  I'm new here.
  I have been searching for an answer days ago and would love to find it here

  I was wondering if it is possible to connect my laptop Satellite 5100 503 via wireless and how it is possible?

  Hey Buddy,

  Is your Satellite 5100 already equipped of wireless network card? As far I know THAT WLAN is an optional feature not available on all laptops. If so, you are only looking for WIFI networks within range.

  If you don t have built in WLAN card you can use a USB WLAN key for example. These sticks are cheap, and then you can go online too. :)

  If you have any other questions, please let us know!