How to connect satellite Pro L40-15 has to my TV?

Similar Questions

• Installation of WXP Pro on Satellite Pro L40-15 has

  Hello

  Just got a Satellite Pro L40 - 15A, its currently got vista home on that and I'll have a go at put WXP Pro on it. Anyone who has tried this? First thing that I'm doing, is integrate the SATA drivers in Windows XP Home edition with nlite. Got Intel Matrix storage drivers which I assume are the right ones. One else you have that works? Also, I've seen there are a few updates to the BIOS, anyone put these yet? Are these worth it, updated the BIOS always makes me nervous!

  See you soon

  Cat scrap

  Hello

  It doesn´t matter which model, because you can use the users for EACH model installation instructions. So, just pick up all the necessary drivers and install XP as the guy described it.
  I did it on a Satellite A100 and it works like a charm. :)

  Welcome them

• Satellite Pro L40-15 has: motherboard problem

  Hi all

  I have a satellite pro L40-15 and it was running vista basic but very slowly.

  A friend advised me that I needed to renew the bios for xp install xp. I did, and now he's dead. The fan is not still running, even if the wireless lights and 3 lights above the power switch will Flash once.

  I took the motherboard out (part number 08g2002ta22jtb). During the inspection, there seems to be a reset button on the plateau (near the battery terminals). It is only accessible with the removed card. Does anyone know haw to restore bios factory settings please?

  Thanks in advance.

  John.

  Hi mate,

  It's cool to you finally disassemble your machine. But you won´t get no benefit from this action given that the bios needs to be reflashed by a technician of toshiba, BECAUSE they have the right tools to do this.

  I don't know how or what tools they use, but I had a similar problem on my Satellite A100 and they fixed without the motherboard. (So it was told to me).

  If I were you, I would send the machine to another and the closest to the ASP (certified partner) in your country. They should bring back your machine to life.

  Here´s a [LINK | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871] to a telecommunications service provider ASP if you need help...

  Cheerio

• Satellite Pro L40-15 a - Sound Driver default after installing Windows XP

  Satellite Pro L40-15 has

  Just installed XP Professional 32, merged with drivers installation disk. Everything works bar the sound. When you run the Realtek driver, downloaded from the Toshiba site, runs almost to the end gives error install Realtek HD Audio Driver failure!

  Clues?

  Hi sail_free,

  Please use the forum search before starting a question. You can find a great number of discussions such as this one:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58026

  He therefore remove the audio driver, install Service Pack 3, and then reinstall the audio driver.

  Check this box!

• Satellite Pro L40 - network LAN adapter does not connect

  We had a satellite pro L40 for about a year and have connected to the internet through our wireless home network using the connection Wireless on the laptop.

  My son has now gone to the University and tries to connect to a wired connection via the network adapter, but without success. He tried 3 different cables and different takes the work of others within its rooms, so we know the cables and connections to work.

  Setting up the program guard in him asking to connect the cable, which he did. Adapter network said he works in the control panel and new network connection section, it says to connect the cable.

  Any ideas would be welcome!

  Steve

  What is the "Installer"?

  Try to disable the firewall and update the LAN drivers on the Toshiba site.

• Satellite Pro L40 - how to make a dual boot with two recovery disks

  A small question;
  How to dual boot with two recovery disks ive got with my laptop (Satellite Pro L40)

  discs 1 & 2 are windows vista buisness
  discs 3 & 4 are windows xp profesional
  Disc 5 is updated the bios

  The guy where I bougt garage computer (a metal regular store named expert) says that it is posible with discs tose.
  I have
  I already have a partition, but when I boot from disks, is not has the option to select a partition

  Thanks already

  > Satellite Pro L40 - how to make a dual boot with two recovery disks?
  Short answer: you can't do that. Maybe if you have two hard disks (I tried didn't) but as much as I know your SP L40 has only one.
  Ask this smart guy, how to do this. Maybe it's a useful tip.

• Satellite Pro L40 - failure wireless, how to diagnose a problem?

  Not now my Satellite Pro L40 will detect wireless networks, and the light does not illuminate when the switch is triggered.

  How can I know what is the problem?
  see you soon
  Mark

  I'm afraid that the WLAN adapter is not correctly enabled.
  Please put the WLAN to position on and after making this combination of keys using FNF8 and enable the wireless network adapter.

  Card WLAN registered and installed properly in Device Manager?

• How to get factory reset disks for Satellite Pro L40?

  Hi all

  Ive got someone other Toshiba Satellite Pro L40 attempt to fix, it got a virus, and the best way to solve this problem is to do a factory reset, so I copied all the personal files on DVD and went to do a factory reset, but told me that I need the discs...

  But apparently, this laptop was given as a replacement by an insurance company, and no records were provided, then how to to get the disks?

  Thank you
  Angus

  Hello

  Not sure if you will be able to order this disc from this page:
  https://backupmedia.Toshiba.EU/landing.aspx

  Sometimes these disks cannot be ordered if the notebook series would be dropped.
  In any case, check out the page and try

  It may be possible to order this disc

• Satellite Pro L40 - 14R and WiFi connection

  Hello!

  I have the model Satellite Pro L40 - 14R with Windows XP Professional Service Pack 2. I just installed a driver for the card wireless (Wireless Network Driver Realtek). After that, I can see device correctly installed:

  Realtek RTL8187B Wireless 802.11 g 54Mbps USB 2.0 Network adapt #2

  In the Device Manager under control panel configuration/system in my WinXP.

  I have also installed "Atheros Client Utility".

  But I don't see any net wireless in my range. No net can be detected! The old model of laptop - see multiple numbers of nets wireless in the healthy zone of mind. What is going on?

  [email protected]

  Hello

  First of all, you can use the Atheros Client Utility with the Atheros WLan card.
  You have a Realtek WLan card and this is why I recommend using WLan configuration option clean Windows to configure the WiFi network.

  But let's go to the essentials
  Have you checked if the WiFi network has been correctly activated? I mean you must activate the Wlan switch on the side of books and you must use the FN + F8 key combination!

  First, please check these two functions.

• Wireless connection on Satellite Pro L40

  I have a Satellite Pro L40 and I am facing a problem with the Wi - Fi connection. When I turn the laptop on no wireless connection is located. To connect, I have to turn off and restart and free Wi - Fi is computer laptop connects to the Internet.

  I have checked the settings etc. and can't find anything wrong. LAN switch is on.

  An offer of help.
  Thank you.

  GOM

  Hello Gom

  If you visit this section you can see numerous threads on WLAN L40 laptop. Check it please. There may be some useful information for you.
  For example check this one.

• Satellite Pro L40: Wireless is turned on but doesn't connect - SOLUTION

  My light on my Satellite Pro L40 orange wireless was on, but it would not connect after Vista crashed.

  By chance, I found a software switch to activate wi - fi on and outside.

  Try this
  right click on desktop
  go to properties Office (Customize)

  on the left hand side - click - Connect to the projector or other external display

  wireless control is on

  hope that help people, mine fixed TI

  Baz

  Great info. I'm sure this will help other users here in the forum

• Satellite Pro L40 - how to enable the WLan using ConfigFree

  Can you help me?

  My English is bad I do not end.

  The question is:
  My computer is a Toshiba Satellite Pro L40 and I use the ConfigFree for the wireless, but it seems that the WiFi network is disabled.

  Help please!
  I want to know what's wrong

  Thank you!!

  Hello!

  Your wireless network card is recognized correctly in the Device Manager, or you may notice a yellow exclamation?
  Her check first because otherwise, you can get the WLAN to work.

  In addition, you can activate WLAN with the material on the laptop switch which must be set on and the FN + F8 key combination.
  Check it!

  After this Free Config should find your WLAN router if you are in the range of that.

  Good bye

• How to replace a HARD drive on satellite Pro L350-16 has

  Hi all
  I have a satellite pro L350-16 has with a 160 GB drive HARD by running a Vista 32 bit operating system. I would like to change it to 500 GB.
  What should I do if I want to keep all the configurations that I have in the 160 GB of HARD drive.
  Thank you.

  Hello

  > What should I do if I want to keep all the configurations that I in the 160 GB HARD drive

  If I understand correctly, you want Vista 32 bit with all the configuration to 500 GB hdd? You can use a program called Acronis True image to a hard drive image backup and move it to another hard drive, then. Note that this program is not free, and you must activate it for use.

• Satellite Pro L40 / L45 - closed/open/sensor cover

  Original title was:
  Pro L40 - location of the sensor/switch cover closed/open

  The moderator (?) changed to:
  Satellite Pro L40: black screen but faint image in background

  This is the reason why I write again; What I'm looking for - at this point, at least - is NOT _specifically_ the LOCATION OF the SWITCH of LID on the L40, how to recover my screen in general.

  Note: My laptop is a Pro L40 but I understand that his in many ways identical to the L45 (UK and USA models) model?

  QUESTION: Did anyone know exactly where the LID OPEN/CLOSED/SENSOR?
  I couldn't find, although I completely disassembled the unit.

  I would appreciate help.

  Thanks and greetings
  Nicolas

  > QUESTION: no one knows exactly where the LID OPEN/CLOSED/SENSOR?

  I'm not quite sure of the position but the LCD m module is connected to the 30pin CON1202 (CON1202 can be found in a small Bay LVDS, which is placed at the bottom of the unit)
  The 5 pins of the connector CON1202 gives the signal for the switch to COVER.

• Question about the files to be transferred on the Satellite Pro L40

  I have a portable Satellite Pro L40 and bought a upgrade disk to upgrade Vista Home Basic to Vista Home Premium.
  But I can not install the upgrade because drive C is showing that only have 8 GB of space.
  Drive E has 30G of space, but I can't transfer files from C to E to free up enough space.

  Please can someone tell me how to transfer files from C to E?

  I can ask the same thing as Akuma - why can you transfer files from C to E of t?

  Open two windows in the Windows Explorer. On the left side of the C drive on the right side of drive E.
  Mark all the files on the left side and move them to the right window. When you do with the key right mouse options will be displayed. Choose the MOVE option and I hope that the adaptation procedure will be launched.

  Have you ever tried to do this?
  An error message appears on the screen?

  Question sorry but described is completely illogical.