How to connect a security camera to a laptop

I really need help setting up my camera system

* original title - I need to connect a security camera for my laptop but I don't find it anywhere in my computer it says it installed but no show what do I do? *

Contact the manufacturer of security cameras to support with their product.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • Qosmio X 770-how to connect a video camera with firewire interface

    Hello

    I want to buy the new QOSMIO X 770.
    I have not found information on firewire.

    The documentation talking about video editing.
    How to connect a camera with firewire?

    No connector, no card expresscard...

    Hello

    You can also use an adapter USB to Firewire which allows you to connect device firewire to USB port of the laptop.
    USB 2.0 is 480 Mbps interface and FireWire is 400 Mbps but interface so, theoretically, USB 2.0 should be faster, but that's not true. Firewire is faster according to some tests. However, there aren't big differences, so I think that the use of this card must function.
    There are various one USB to Firewire adapter on the market. Simple Google.

  • How to connect an IP camera to cRIO-9025?

    Hello

    I have a cRIO 9025 with two ethernet ports. I want to connect an IP camera for the cRIO to capture images at regular intervals. I followed the procedure mentioned in this post: http://zone.ni.com/devzone/cda/tut/p/id/10867, MAX, but still cannot detect the camera. I downloaded the drivers mentioned in the above page. Could someone please suggest a solution?

    Thank you.

    Hi Pranjal,

    Acquisition of images on a cRIO is very limited right now. The only supported RIO acquisition is of IP cameras by Basler and axis. These cameras use the IMAQdx pilot. Take a look at this linkand look under the section Fast Ethernet (IP) for more precision. Since you are using a Panasonic camera, the driver doesn't know how to recognize.

    In addition, with the right type of camera, IMAQdx drivers must be installed on the host computer and the cRIO to properly set up the acquisition of images. Take a look here for details on the appropriate measures to implement. I would like to know if I can help with anything else.

    Best regards

    Sahil Singla

    Sales engineer | National Instruments

  • How to connect the digital camera Canon PowerShot A200 computer

    How to connect canon powershota200 to the computer (windows 7 32 bit)?

    Your options include the use of the USB cable provided with the camera or you can remove the SD card from the camera and insert it into an SD card reader if we're a part of your computer.

    If you are using the USB cable, the device should appear in devices and printers (Start menu), and browse the camera and copy videos or images from the camera. This can also be done via Windows Explorer.

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-pictures-from-my-camera-to-my-computer

  • How to connect a video camera (not a webcam), in a way that Flash player sees as webcam

    Dear all,

    I'm working on a project of interactive/augmented reality for a show, where viewers trigger a video by sitting and standing at some point in a room (like the BBC Frozen Planet). My problem is that the image of the webcam we used to capture the audience is not up to the task and produced a really poor quality image. Now I'm trying to fix a video camera with recorder Mini Blackmagic, but Flash Player (standalone) 17 does not recognize the entry as a webcam. So is it possible to connect an external camera flash takes care of everything? Otherwise, can anyone recommend a great webcam, it's SIGNIFICANTLY better than Logitech Pro 910? Thanks in advance!

    [Move this discussion here]

  • HP Pavilion 17-g121wm: how to disconnect my digital camera to my laptop with windows 10

    How do I disconnect my digital camera to my windows laptop 10

    Thank you for the additional information.  I thought I can be hard to interpret what you wanted.

    Well, you want to disconnect safely your digital camera to the laptop.  It seems that there is not an icon in the box "Show hidden icons" from the taskbar.  If this is the case, you have no choice but to simply disconnect it.  Although it is not recommended, I did several times over the years without causing damage.  Make sure that you have copied all your photos on your computer before you disconnect it.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • How to connect my Samsung wave with my laptop via wifi?

    original title: wifi connection

    HOW TO CONNECT MY SAMSUNG WAVE 525 WITH MY DELL INSPIRON 1525 BY WIFI

    Hello

    I suggest you follow the links below and the Coachman

    Add a device or computer to a network

    http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-device-or-computer-to-a-network

    Set up a Bluetooth compatible device

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

    You try to connect the phone directly on the system or through a router?

    You will not be able to connect the cellphone to the PC directly,

    See the explanation: http://www.samsungwaveforum.com/samsung-wave-troubleshooting/connecting-wave-to-pc-through-wifi/

  • How to connect a printer wireless to my laptop

    I have a printer HP Officejet wireless 6500 E709n Series and I'd like to connect wirelessly to my Acer Aspire 5734Z lap top. Please notify.

    The wireless printer is already connected to your wireless home network?

    If so do you have installed the software from the manufacturer of the printer wireless on your computer Win 8.

    For example...

    When I installed my camera HP J4680 AiO (print/fax/scan) on my Windows 7 computer, I did these steps...

    1. Creates an ad hoc connection between the J4680 and my laptop Win 7.
    2. Configured the J4680 manually with my network SSID and the encryption type and encryption key. I did steps 1 and 2 because my random 63 character ASCII encryption key contains characters that are not available in the network control panel on the J4680 wireless. If you use a key encryption without special characters, you should be able to configure just the network settings from the printers Panel Wireless.
    3. The provided HP software, including drivers on my laptop Win 7 installed. The HP software went out and found the J4680 on my network.

    The steps should be similar for your device HP OfficeJet 6500 E709n, IE. Get it on the first wireless network and then install the HP software on your machine, Windows 8.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&destPage=product&DLC=en&JumpID=reg_r1002_usen_c-001_title_r0001&LC=en&product=3795406&

    More help from HP...

    http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&destPage=product&DLC=en&JumpID=reg_r1002_usen_c-001_title_r0001&LC=en&product=3795406&

  • Tecra 8000 - how to connect the HARD drive to another laptop?

    Hello, what kind of camera do I need to connect an old hard drive Tecra 8000 to a laptop from another production?

    I want to just transfer some data, but the connector on the Tecra ac no longer works.

    Hello!

    You can use a drive enclosure external DRIVE with USB port for this.
    The external HARD disk enclosure should be for 2.5 s HDD with IDE interface. All that s.

    Contact your local computer dealer. I'm sure they will have these cases.

    Good bye

  • How to connect a kindle fire to my laptop?

    How can I connect my kindle fire, that does not have a driver on my laptop?

    From:
    http://www.Amazon.com/Forum/Kindle?_encoding=UTF8&cdForum=Fx1D7SY3BVSESG&cdPage=1&cdThread=Tx14BWPZ7KR63F4

    "The customer service saw my post here and called me." They said that there is no driver and that fire should open (not in mode "standby") before plugging the computer. I plugged and again got this message on the installation of the driver, so I just clicked on "Don't ask Me This Again" and the box opens for Windows Explorer folders. I disconnected and reconnected the message trying to install a driver is now gone and I can go to Windows Explorer to view the folders in the fire. »

    "My computers windows 7 does the same thing. However, when I unlock the fire the computer can access the drive, even if he always tells me he needs a driver. »

    Kindle support:
    http://www.Amazon.com/GP/help/customer/display.html

  • How to connect HBH-DS970 to my Toshiba laptop?

    Hello!

    I have a lot of problems, try to connect my headset Bluetooth Sony Ericsson HBH-DS970 (is A2DP)
    Can someone help me (because the devices are connected, but does not play audio on headphones, only in the specification)
    Thank you
    Kind regards!

    First, you must use the last battery Bluetooth. You can download it here:
    http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/download.php

    I also recommend to take a look at the following Web site:
    http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/FAQ.html
    You should have a look at the following documents:
    Why my microphone is not working?
    Why the Bluetooth headset does not work?
    Why the Bluetooth headset does not work?

  • How to connect wireless hp photosmart c4600 to laptop

    Is it possible to connect my computer with my printer hp laptop

    Hello

    To do this, have not integrated wireless card so you have to use

    (a) print server USB wireless as one of the following devices:

    http://www.eBay.com.au/BHP/wireless-print-server

    (b) a router or a modem router which has function of print as one of the following server:

    http://www.CNET.com.au/ASUS-RT-n13u-wireless-n-router-with-all-in-one-printer-server-339298696.htm

    (c) you can also use another computer (if you have a spare) to serve as a print server.

    Kind regards.

  • I need to know how to configure the security settings for my laptop secured with a wireless router & domestic printer on a network in an apt building

    I live in an apartment bldg & want to know if my phone is secured with a wireless router & domestic implementation of a network. I have a laptop HP under Win 7 pro, a desktop computer using XP, & a wireless Canon printer? I use Microsoft Security Essentials for security. Can you tell me the right settings to ensure the safety of my business? And if I use the 'Public' library in documents others may see them outside my home network?

    Hi Tere,

    You can see this Microsoft article to strengthen the security of your computer and your network.

     

    Make your network more secure

    http://Windows.Microsoft.com/en-in/Windows7/making-your-network-more-secure

     

    Personal information and files on your wireless network can sometimes be seen by people to pick up the signal from your network. This can lead to identity theft and other acts of violence. A network security key or password can help protect your network against this type of unauthorized access wireless. Refer to this article for more information:

    Set up a security key for a wireless network

    http://Windows.Microsoft.com/en-in/Windows7/set-up-a-security-key-for-a-wireless-network

    Public folders are a convenient way to share files on your computer. You can share files in the public folders with other people using the same computer and with people using other computers on your network. Any file or folder you put in a folder Public is automatically shared with the people who have access to your public folders.

    Share files via public folders

    http://Windows.Microsoft.com/en-in/Windows7/share-files-using-the-public-folders

    Hope this information helps. If you need help with Windows, let us know and will be happy to help you.

  • How to connect a camera Digital Video through IEEE 1394 on my A50 port?

    Hello
    I tried to connect a video camera to my laptop SA50-109 through port IEEE 1394... but the laptop doesn't recognize any camera...
    Although the shows 'DV-in' camera when I plug the cable witch is DV (4-pin to 4-pin) cable...
    is there something I need to do before to make it work?
    any ideas... Please?

    Hi Isabelle,.

    I think that the normal login procedure is: -.

    1. connect the firewire cable to the camcorder.

    2. connect the other end to the laptop.

    3. turn on the camcorder (in play rather than camera mode).

    4. Windows will detect the camcorder and will make available as input source for your capture software.

    HTH

  • How to connect a digital camcorder for Satellite L40?

    I'm a total numpty! You want to connect digital video camera to my laptop computer and manual talk iEEE1394?

    Any help gratefully received.

    Hello!

    What device you want to connect to your laptop?

    Normally you can connect to the camera via a USB or Firewire cable, and it comes with the camera. Maybe you need to install additional software for the camera, but it also comes with the camera.

    Check the manual of your camera. Need you all the information you need.

    Good bye

Maybe you are looking for

  • How can I disable AutoComplete in Firefox for Mobile?

    I noticed that in the options, there is only the possibility of control if Firefox remembered passwords. Is it possible to stop Firefox remembering user names, email addresses etc?

  • MacBook Pro 2011 extended battery

    Hey guys and girls, Last night when I was about to use the laptop, I noticed, that it was not closed correctly, one side had one large gap than the other and when I opened it, noticed that the trackpad was not in its normal position, as if someone wa

  • Win7 update error 'WindowsUpdate_80070005' remake

    I'm gettitng the error of "windowsupdate_8007005" like many others users on this particular problem with Vista 64.  I have the same problem with win7 64.  I did the listed suggesitons (original question "Error Window update"WindowsUpdate_80070005") a

  • Wireless installation need help with Photosmart c309a Mac OS x 10.6.8

    I lost my hard drive and am now reinstalling my drivers etc. for the HP Photosmart c309a Mac OS x 10.6.8. It will print if I connect via the USB port, but my office is across the room from the printer. At the same time, I was able to print and scan w

  • Problem of collecting usage data with advanced BES application on the workspace

    Hi I have a bb10 application that collect usage data. It work propaply when it is on the store and my personal space of peripheral company. I used to get the use of the data as the sum of msm0, msm1, msm2, msm3, msm4, msm5, msm6, msm7 interfaces. And