How to connect to Oracle 8

Similar Questions

• Need to find a way to understand how DB2 connect to Oracle and mirroring of data etc.

  Hi, gurus,

  I just take over a source project which is the ICOMS as400 db2 database. Seems data mirro that CDC is used to replicate from DB2 to oracle.

  I am very new to this CDC datamirror, more I am new to figure out how db2 connect to oracle, it is only through db link or what? or is it tnsnames entry?

  I wish someone in this forum can point me in the right direction.

  Thanks in advance.

  Hello

  What do you not sure about?
  If Oracle can be the site of conduct, you can use the gateway for DRDA database and we can help you with that. If you need assistance on setting up DataMirror CDC to connect to Oracle, then you will need to contact IBM because it is one of their products.

  Kind regards

  Mike

• How to connect to Oracle 11 g 2 of CF9

  Hello

  How to connect to Oracle 11 GR 2 64 bit, database of CF9?

  In CF administrator no Oracle driver is available.

  I need to install the Oracle Client software on server hardware where the CF9 server is installed?

  If so, is the Oracle Instant Client is enough or do I need to install the full oracle client?

  Any idea?

  cordially Claudia

  I assume you are using the Standard edition? Native drivers for Oracle come with CF9 Enterprise, you will need to download the JDBC drivers from Oracle's Web site.

• How to connect to Oracle Form Builder - Oracle Developer Suite 10 g - Windows 7

  Hi brothers and sisters.
  
  Hope that you are well. I installed Oracle Developer Suite 10 g on Windows 7 successfully and that it works correctly. But when I connect to Oracle Form Builder using Connect window asking:
  
  a. user name of
  b. password
  c. database
  
  a message box appears: "ORA-12154: TNS: could not resolve the connect identifier specified '.
  
  I check my String to connect with: ' SELECT * FROM database of v$ ', but the problem remains the same.
  
  Please help me how can I connect to Oracle Form Builder.
  
  Noor

  Hello

  Please use Net Configuration Wizard or set tnsnames.ora with string and computer name to connect.

  NET Configuration Assistant.
  When its open then go to.
  * The local Net Service name configuration.
  * Click Next.
  * Add.
  * Click Next.
  * Name service - Type here connect the String which is XE or any connection string.
  * TCP.
  * Click Next.
  Host name - enter computer name or Ip address.
  * Yes, perform a test.
  you enter the right password and username here.

  Note:-your database should be Up if it's not high, it will be by the same error please start your database first.
  Sarah

• How to connect to Oracle Enterprise Manager 10 g Database Control have SYSDBA?

  Hello
  
  I installed Oracle 10.2.0 (Enterprise Edition) on my laptop at home. And with SQL * Plus, I login as sys and created a user Charles (with the password pwd), and I granted the DBA role to this user. SQL * more messages saying that the user has been created and the role (the DBA role has been granted). When I log on to Oracle Enterprise Manager 10g Database Control as a user Charles (with the password pwd that I gave to the creation of the user) as usual (in the 'Connect as' drop-down), I check that the Charles user has DBA profile. My problem is that when I try to connect to Oracle Enterprise Manager 10g Database Control as a user Charles (with the pwd password that I gave to the creation of the user) and as SYSBA+, one error message is displayed: your user name and/or password is not valid.
  Please, how do I connect to to Oracle Enterprise Manager 10 g Database Control as a user Charles (with the password pwd that I gave to the creation of the user), but as SYSDBA?
  
  Thanks in advance for your answers.

  user639304 wrote:
  Hello

  I installed Oracle 10.2.0 (Enterprise Edition) on my laptop at home. And with SQL * Plus, I login as sys and created a user Charles (with the password pwd), and I granted the DBA role to this user. SQL * more messages saying that the user has been created and the role (the DBA role has been granted). When I log on to Oracle Enterprise Manager 10g Database Control as a user Charles (with the password pwd that I gave to the creation of the user) as usual (in the 'Connect as' drop-down), I check that the Charles user has DBA profile. My problem is that when I try to connect to Oracle Enterprise Manager 10g Database Control as a user Charles (with the pwd password that I gave to the creation of the user) and as SYSBA+, one error message is displayed: your user name and/or password is not valid.
  Please, how do I connect to to Oracle Enterprise Manager 10 g Database Control as a user Charles (with the password pwd that I gave to the creation of the user), but as SYSDBA?

  Thanks in advance for your answers.

  CHARLES GRANT SYSDBA;

• How to connect to oracle ebs from external software

  Hello!
  
  I want to develop an integration for oracle EBS. To this end, I'm looking for ways how to connect at EBS and a repository of functions that can be called from an external program. I'm not sure if this is the right place to ask but I haven't found anything yet so I'll try here.
  
  Y at - it of standard connectors for provided by Oracle EBS?
  
  Thank you
  Konrad

  Oracle Applications Architecture is a framework for distributed computing and at several levels that supports Oracle Applications products. In this model, different servers are divided in several levels/levels as follows:

  -The Office of the range--> browser with Jinitiator or Sun JRE
  ---> Web servers, forms, States, Admin and simultaneous Application layer
  -The layer of database--> Oracle Enterprise Edition database

  The Application layer is the layer that is responsible for:

  -The different servers that deal with the business logic of accommodation
  -Manage the communication between the Office of the range and the database layer

  So, to connect to the database, you can access the application layer, or connect directly to the base. I don't think that it is possible to communicate with the application to another application services. Therefore, you must connect directly to the database which can be carried out as explained in my previous answer. There is no such API that can be used to open and close a database connection. Oracle E-Business Suite is just a database with number of patterns and objects that are perfectly integrated.

  More information on Oracle E-Business Architecture found in:

  Concepts of Oracle Applications
  http://download-UK.Oracle.com/docs/CD/B25516_14/current/Acrobat/11iconcepts.PDF

• How to connect to Oracle XE have SysDBA using VS 2008?

  Hello, I tried to connect to Oracle XE using VS 2008 by using the version of two drivers:
  
  (1) version (installed with Oracle XE) 10.2.0.100
  (2) version 2.5.7 (installed with odp.net [http://www.oracle.com/technology/tech/windows/odpnet/index.html])
  
  using both, I have the same exception...
  
  Oracle.DataAccess.Client.OracleException provider is not compatible with the version of the Oracle client
  
  What's wrong???
  
  TKS for your help.
  
  Praxedes of Dante
  E-mail: [[email protected]]
  
  Published by: dantePrax on 06/29/2009 11:25

  If you are using VS 2008, I advise to use the last available ODP.NET, 11.1.0.6.20. There was a difficulty added to the 10.2.0.4 release and above that best ensures you won't see the error "provider is not compatible with the version of the Oracle Client." Using one of these newer versions will probably solve this specific problem.

  I don't know what version 2.5.7 designates.

• How to connect to Oracle 12 c with SQLPLUS 6i

  Hi people:

  I have people who still need to use the client of 6i SQLPlus.   They were able to connect to our previous database (11g R2) ok.  People who use more recent versions of SQLPlus can connect ok to the Oracle 12 c database that we use.

  Does anyone know what setting (and how) I want to change the database Oracle 12 c to allow access to an earlier version of SQLPlus?

  Thank you

  Matthew

  I have people who still need to use the client of 6i SQLPlus.

  6i is not the version of the Client, but the forms & reports one, the version of the Client is 8.0.6, too old to be used with the database of 12 c.

  See MOS Client / Server interoperability Support Matrix for Oracle Versions (Doc ID 207303.1)

  BTW, I tried with a client 9i, and I've got ORA-28040: no authentication protocol matching error, as mentioned in the document and 8.0.6 is even two older versions.

• How to connect an Oracle database without using input TNS

  Hello
  
  I need to connect my pc Oracle database server without using the TNS entry. How to do this?
  
  Kind regards
  
  007

  [easy connection: CONNECT to username/password@[/]host[:port][service_name]

• How to connect to Oracle no third of bpel Server

  Hello
  
  I want to know best way to connect to databases oracle not like MS SQL Server, DB2 etc. I found third party drivers must be installed. But for this we need to buy these products too.
  
  A better idea about it. I need the bpel DB2 connection. I want to avoid any additional license purchase.
  
  
  I appreciate all the comments.

  Hello

  You can use the DataDirect JDBC drivers to connect to DB2.

  Here is the download link:
  http://www.Oracle.com/technology/software/tech/sqlj_jdbc/datadirect_index.html

  Certification matrix to see which version of donwnload
  http://www.Oracle.com/technology/tech/Java/OC4J/htdocs/DataDirect-JDBC-certification.html

  And finally how to configure it for DB2:
  http://download.Oracle.com/docs/CD/B31017_01/Web.1013/b28958/datasrc.htm#CIHBAFEG

  See you soon,.
  Mihai

• How to connect to Oracle 8i server of Windows 7?

  Windows 7 supports the installation of the oracle 8i client.

  I need to connect to the server which is oracle 8i.

  The compatibility of Windows 7 Center allows you to check and see if hardware or software is compatible with Windows 7.
  Click on here for a link to the Windows Compatibility Center 7 You can see the different software that that you are questioning.

• How to connect Microsoft excel to oracle database?

  version Oracle 11.2.0.3
  version of solaris 10 operating system
  Microsoft excel 2007
  
  any body can help me how to connect excel, oracle database, I can write my query in excel, and retrieve data from oracle database and show in excel sheet or I can write a query to insert data to the oracle database.

  Hello

  I never tried, but why not try so if you succeeded you will come to know otherwise you would need still oracle client to connect to the oracle database that is located on the other server or if you do not have to install on your local machine that you cannot connect to the oracle database oracle client.

• How to connect the sql with cloud developer

  Hello

  We are able to create and connect data bases in the clouds, but not sure how to connect with oracle sql developer locally.

  Any help.

  I get the database settings and manage to connect with sql developer

• How to connect to my OracleXe with SqlDeveloper?

  Hi all I have installed oracle xe on a Windows Xp computer, asked me for a password and I typed: 123

  Then I have a myback.dmp filenamed backup and imported:

  IMP file = myback.dmp ' 123/sys AS SYSDBA"full = Yes log = implog.log

  example of messages: when importing

  ==============================================================================================================

  ORA-01917: user or role 'PASES_FIERROS' does not exist

  IMP-00017: statement failed with error ORACLE 1917:

  "GRANT ON COMMIT REFRESH"MUNICIPIOS"AT"PASES_FIERROS"

  IMP-00003: ORACLE error 1917

  ORA-01917: user or role 'PASES_FIERROS' does not exist

  IMP-00017: statement failed with error ORACLE 1917:

  "GRANT QUERY REWRITE ON"MUNICIPIOS"AT"PASES_FIERROS"

  IMP-00003: ORACLE error 1917

  ORA-01917: user or role 'PASES_FIERROS' does not exist

  IMP-00017: statement failed with error ORACLE 1917:

  "GRANT SELECT ON"MUNICIPIOS"AT"PASES_FIERROS"

  IMP-00003: ORACLE error 1917

  ORA-01917: user or role 'PASES_FIERROS' does not exist

  IMP-00017: statement failed with error ORACLE 1917:

  "GRANT UPDATE ON"MUNICIPIOS"AT"PASES_FIERROS"

  IMP-00003: ORACLE error 1917

  ORA-01917: user or role 'PASES_FIERROS' does not exist

  About to activate the constraints...

  Import completed successfully with warnings.

  ==============================================================================================================

  then I ask:

  (1) how to resolve similar messages to:

  ORA-01917: user or role 'PASES_FIERROS' does not exist

  (2) how to connect with Oracle Database XE? and see the data

  I try with these settings:

  Conconnection name: MyConn

  Username: SYSDBA (and also try: user SYS)

  Password: 123

  Connection type: TNS

  Alias: XE

  and say: the other error message access denied: user: SYS must be SYSDBA or SYSOPER

  all advice?

  Thank you

  Note: I do not know how to be generated myback.dmp (username/password and other settings).

  The connection type must be 'AS SYSDBA"to the user SYS and 'basic' for users not dba.

• c# to connect to Oracle 10 g XE error

  Example
  http://www.Oracle.com/technology/OBE/hol08/dotnet/getstarted-c/getstarted_c_otn.htm
  
  
  using Oracle.DataAccess.Client; Managed provider for Oracle ODP.NET
  using Oracle.DataAccess.Types;
  
  Oradb string = "Data Source = ORCL; User Id = hr; Password = hr; « ;
  OracleConnection conn = new OracleConnection (oradb); // C#
  Conn. Open(); < == connect error
  
  Error message "ORA-12154: TNS: could not resolve the connect identifier specified.
  
  
  Of the question
  How to connect to Oracle Database 10g Express Edition?
  How to enter your tnsnames.ora file called "ORCL"?
  
  I am a beginner.
  Best regards

  Hello

  I posted a reply in the other thread:

  Re: Connect error Oracle Database 10g Express Edition?

  Kind regards

  Mark