How to connect to Oracle no third of bpel Server

Similar Questions

• Need to find a way to understand how DB2 connect to Oracle and mirroring of data etc.

  Hi, gurus,

  I just take over a source project which is the ICOMS as400 db2 database. Seems data mirro that CDC is used to replicate from DB2 to oracle.

  I am very new to this CDC datamirror, more I am new to figure out how db2 connect to oracle, it is only through db link or what? or is it tnsnames entry?

  I wish someone in this forum can point me in the right direction.

  Thanks in advance.

  Hello

  What do you not sure about?
  If Oracle can be the site of conduct, you can use the gateway for DRDA database and we can help you with that. If you need assistance on setting up DataMirror CDC to connect to Oracle, then you will need to contact IBM because it is one of their products.

  Kind regards

  Mike

• How to connect to Oracle 11 g 2 of CF9

  Hello

  How to connect to Oracle 11 GR 2 64 bit, database of CF9?

  In CF administrator no Oracle driver is available.

  I need to install the Oracle Client software on server hardware where the CF9 server is installed?

  If so, is the Oracle Instant Client is enough or do I need to install the full oracle client?

  Any idea?

  cordially Claudia

  I assume you are using the Standard edition? Native drivers for Oracle come with CF9 Enterprise, you will need to download the JDBC drivers from Oracle's Web site.

• How to connect to Oracle Form Builder - Oracle Developer Suite 10 g - Windows 7

  Hi brothers and sisters.
  
  Hope that you are well. I installed Oracle Developer Suite 10 g on Windows 7 successfully and that it works correctly. But when I connect to Oracle Form Builder using Connect window asking:
  
  a. user name of
  b. password
  c. database
  
  a message box appears: "ORA-12154: TNS: could not resolve the connect identifier specified '.
  
  I check my String to connect with: ' SELECT * FROM database of v$ ', but the problem remains the same.
  
  Please help me how can I connect to Oracle Form Builder.
  
  Noor

  Hello

  Please use Net Configuration Wizard or set tnsnames.ora with string and computer name to connect.

  NET Configuration Assistant.
  When its open then go to.
  * The local Net Service name configuration.
  * Click Next.
  * Add.
  * Click Next.
  * Name service - Type here connect the String which is XE or any connection string.
  * TCP.
  * Click Next.
  Host name - enter computer name or Ip address.
  * Yes, perform a test.
  you enter the right password and username here.

  Note:-your database should be Up if it's not high, it will be by the same error please start your database first.
  Sarah

• How to connect to Oracle Enterprise Manager 10 g Database Control have SYSDBA?

  Hello
  
  I installed Oracle 10.2.0 (Enterprise Edition) on my laptop at home. And with SQL * Plus, I login as sys and created a user Charles (with the password pwd), and I granted the DBA role to this user. SQL * more messages saying that the user has been created and the role (the DBA role has been granted). When I log on to Oracle Enterprise Manager 10g Database Control as a user Charles (with the password pwd that I gave to the creation of the user) as usual (in the 'Connect as' drop-down), I check that the Charles user has DBA profile. My problem is that when I try to connect to Oracle Enterprise Manager 10g Database Control as a user Charles (with the pwd password that I gave to the creation of the user) and as SYSBA+, one error message is displayed: your user name and/or password is not valid.
  Please, how do I connect to to Oracle Enterprise Manager 10 g Database Control as a user Charles (with the password pwd that I gave to the creation of the user), but as SYSDBA?
  
  Thanks in advance for your answers.

  user639304 wrote:
  Hello

  I installed Oracle 10.2.0 (Enterprise Edition) on my laptop at home. And with SQL * Plus, I login as sys and created a user Charles (with the password pwd), and I granted the DBA role to this user. SQL * more messages saying that the user has been created and the role (the DBA role has been granted). When I log on to Oracle Enterprise Manager 10g Database Control as a user Charles (with the password pwd that I gave to the creation of the user) as usual (in the 'Connect as' drop-down), I check that the Charles user has DBA profile. My problem is that when I try to connect to Oracle Enterprise Manager 10g Database Control as a user Charles (with the pwd password that I gave to the creation of the user) and as SYSBA+, one error message is displayed: your user name and/or password is not valid.
  Please, how do I connect to to Oracle Enterprise Manager 10 g Database Control as a user Charles (with the password pwd that I gave to the creation of the user), but as SYSDBA?

  Thanks in advance for your answers.

  CHARLES GRANT SYSDBA;

• How to connect to oracle ebs from external software

  Hello!
  
  I want to develop an integration for oracle EBS. To this end, I'm looking for ways how to connect at EBS and a repository of functions that can be called from an external program. I'm not sure if this is the right place to ask but I haven't found anything yet so I'll try here.
  
  Y at - it of standard connectors for provided by Oracle EBS?
  
  Thank you
  Konrad

  Oracle Applications Architecture is a framework for distributed computing and at several levels that supports Oracle Applications products. In this model, different servers are divided in several levels/levels as follows:

  -The Office of the range--> browser with Jinitiator or Sun JRE
  ---> Web servers, forms, States, Admin and simultaneous Application layer
  -The layer of database--> Oracle Enterprise Edition database

  The Application layer is the layer that is responsible for:

  -The different servers that deal with the business logic of accommodation
  -Manage the communication between the Office of the range and the database layer

  So, to connect to the database, you can access the application layer, or connect directly to the base. I don't think that it is possible to communicate with the application to another application services. Therefore, you must connect directly to the database which can be carried out as explained in my previous answer. There is no such API that can be used to open and close a database connection. Oracle E-Business Suite is just a database with number of patterns and objects that are perfectly integrated.

  More information on Oracle E-Business Architecture found in:

  Concepts of Oracle Applications
  http://download-UK.Oracle.com/docs/CD/B25516_14/current/Acrobat/11iconcepts.PDF

• How to connect to Oracle XE have SysDBA using VS 2008?

  Hello, I tried to connect to Oracle XE using VS 2008 by using the version of two drivers:
  
  (1) version (installed with Oracle XE) 10.2.0.100
  (2) version 2.5.7 (installed with odp.net [http://www.oracle.com/technology/tech/windows/odpnet/index.html])
  
  using both, I have the same exception...
  
  Oracle.DataAccess.Client.OracleException provider is not compatible with the version of the Oracle client
  
  What's wrong???
  
  TKS for your help.
  
  Praxedes of Dante
  E-mail: [[email protected]]
  
  Published by: dantePrax on 06/29/2009 11:25

  If you are using VS 2008, I advise to use the last available ODP.NET, 11.1.0.6.20. There was a difficulty added to the 10.2.0.4 release and above that best ensures you won't see the error "provider is not compatible with the version of the Oracle Client." Using one of these newer versions will probably solve this specific problem.

  I don't know what version 2.5.7 designates.

• How to exclude the Oracle Workflow installation CD companion server?

  We are modernizing our E-Business suite 11i database to 10.2.0.3.
  
  The E-Business suite upgrade request notice to install "Oracle Database 10 g products" Companion CD on 10g of the House. Oracle default workflow server is included in the guide installation with a CD Type 'Install a database Oracle 10 g products'. However the installation document CD companion says that don't install Server workflow on the database of trade electronics uite, as indicated below.
  
  Now how can I exclude the Oracle workflow installation CD companion server?
  
  ================================
  Note: Do not install Oracle Workflow Server in Oracle E-Business
  Office database. If you want to use the version of Oracle Workflow
  available with Oracle Database 10g, or any Oracle database
  components that depend on the version of Oracle Workflow, then you
  need to install the Oracle of Workflow Server in a database that is not used
  Properties of an instance of Oracle E-Business Suite.
  For an Oracle E-Business Suite database, you can continue to use the
  version of the Oracle Workflow Server integrated in Oracle E-Business
  Suite.
  ================================

  John,

  You should ignore the steps under "Preparing Oracle Workflow Server for the Oracle Workflow Middle Tier Installation", but the workflow will be installed as part of the accompanying CD (select option 2 - products of Oracle database)

  Upgrade of Oracle Applications 11i database 10g R2 (10.2.0.3)
  http://Oracle-Apps-DBA.blogspot.com/2007/09/upgrade-Oracle-Applications-11i.html

  Here is the link for the steps you need to jump:

  Prepare mid-level Workflow Oracle Oracle Workflow Server Installation
  http://download.Oracle.com/docs/CD/B19306_01/install.102/B15664/install_sw.htm#BABHHHCC

• How to connect to Oracle 12 c with SQLPLUS 6i

  Hi people:

  I have people who still need to use the client of 6i SQLPlus.   They were able to connect to our previous database (11g R2) ok.  People who use more recent versions of SQLPlus can connect ok to the Oracle 12 c database that we use.

  Does anyone know what setting (and how) I want to change the database Oracle 12 c to allow access to an earlier version of SQLPlus?

  Thank you

  Matthew

  I have people who still need to use the client of 6i SQLPlus.

  6i is not the version of the Client, but the forms & reports one, the version of the Client is 8.0.6, too old to be used with the database of 12 c.

  See MOS Client / Server interoperability Support Matrix for Oracle Versions (Doc ID 207303.1)

  BTW, I tried with a client 9i, and I've got ORA-28040: no authentication protocol matching error, as mentioned in the document and 8.0.6 is even two older versions.

• How to connect an Oracle database without using input TNS

  Hello
  
  I need to connect my pc Oracle database server without using the TNS entry. How to do this?
  
  Kind regards
  
  007

  [easy connection: CONNECT to username/password@[/]host[:port][service_name]

• How to connect to Oracle 8i server of Windows 7?

  Windows 7 supports the installation of the oracle 8i client.

  I need to connect to the server which is oracle 8i.

  The compatibility of Windows 7 Center allows you to check and see if hardware or software is compatible with Windows 7.
  Click on here for a link to the Windows Compatibility Center 7 You can see the different software that that you are questioning.

• How to connect to Oracle 8

  Dear Experts,
  
  I am in need of connection to a lower version of Oracle (version 8) as one of the sources of DW.
  I tried to connect directly via the Oracle Module, but it failed.
  
  Could someone enlighten me please on this subject
  
  OWB & DB Version: 11.2.0.1
  
  Thanks in advance
  Rlap

  Hi Rlap,
  problem with connection of OWB11g to the old database is Oracle compatibility between different Oracle client/server releases.
  Compatible combination, you can get Metalink note "Client / Server / interoperability between Oracle Versions support" (id Note 207303.1).
  In your case, you can try to use Oracle 9.2 additional data bases - create in this database schema, and then build in this view of schema with db-connect to Oracle8 database.
  for example:
  Create view v_oracle8_table in select * from oracle8_table@dblink_oracle8

  Then in OWB create location and module that refer to the Oracle 9.2 database.

  Or you can try to use generic connectitvity (connect to Oracle8 with ODBC) - in this case, you need to install old Oracle (for example Oracle 8.1.7) client with the ODBC for Oracle driver.

  Kind regards
  Oleg

• How to determine the Oracle Max process on Windows Server settings

  Currently I have Oracle 11.2.0.1.0 running
  Windows 2003 EE R2 SP2 x 32
  
  The issue now is:
  
  How to determine what is the maximum value that I can set the process?
  
  I guess that's the operating system and hardware dependent, but I can't find documentation on this topic.
  
  Any help is appreciated.
  Jason Longenecker
  
  Published by: LONGENECKER on May 13, 2013 11:33
  
  Published by: LONGENECKER on May 13, 2013 11:36

  We shouldn't just work the PROCESS parameter for the maximum number of BONES.

  More processes that you have, more will consume PGA the oracle Instance, i.e. more memory will be used on your server.

  You should check v$ resource_limit see if it really reached setting TREATY limits, if yes increase the parameter appropriately so that the high tide of use remains about 80% of the value of the parameter. Check if the number of sessions dedicated process is really necessary, otherwise you can consider the use of database resident connection pooling or a shared server or tuning configuration opening less sessions on the database.

  Depending on how much you increase, take a look at the view of PGA advice after a workload of the cycle of V$ PGA_TARGET_ADVICE and V$ MEMORY_TARGET_ADVICE.

• How to FTP an Oracle RDS instance to a server of the entity?

  Hi all

  I'm a newbie DBA. I have a task that describes to perform a backup of the instance Oracle RDS and FTP to a server of the entity. My question is how FTP this backup?

  RDS faq seems to say you can't do, you export instead, but I don't know enough about it to know if it's relevant.  Perhaps you should ask support Amazon or an Amazon RDS on board.  It could be a case of "If you do not have access through the dashboard, you can not see it" automated backup Amazon RDS - Stack Overflow

• How to migrate the Oracle database to the MySql server

  Hello
  
  I'm on a project that include databases oracle to MySql database migration, also include data warehouse servers.
  Please help me, what is the procedure to migrate the oracle to MySql database database, which takes relatively to the objects of care.
  If any link help me, please let me know.

  Hello
  This forum is for assistance to the migration of non-Oracle to Oracle databases. If you need assistance in migrating from Oracle to MySQL contact MySQL. You can try the forum MYSQL here-

  http://forums.MySQL.com/

  Kind regards
  Mike