How to FTP an Oracle RDS instance to a server of the entity?
Hi all
I'm a newbie DBA. I have a task that describes to perform a backup of the instance Oracle RDS and FTP to a server of the entity. My question is how FTP this backup?
RDS faq seems to say you can't do, you export instead, but I don't know enough about it to know if it's relevant. Perhaps you should ask support Amazon or an Amazon RDS on board. It could be a case of "If you do not have access through the dashboard, you can not see it" automated backup Amazon RDS - Stack Overflow
Tags: Database
Similar Questions
-
How to connect to Oracle no third of bpel Server
Hello
I want to know best way to connect to databases oracle not like MS SQL Server, DB2 etc. I found third party drivers must be installed. But for this we need to buy these products too.
A better idea about it. I need the bpel DB2 connection. I want to avoid any additional license purchase.
I appreciate all the comments.Hello
You can use the DataDirect JDBC drivers to connect to DB2.
Here is the download link:
http://www.Oracle.com/technology/software/tech/sqlj_jdbc/datadirect_index.htmlCertification matrix to see which version of donwnload
http://www.Oracle.com/technology/tech/Java/OC4J/htdocs/DataDirect-JDBC-certification.htmlAnd finally how to configure it for DB2:
http://download.Oracle.com/docs/CD/B31017_01/Web.1013/b28958/datasrc.htm#CIHBAFEGSee you soon,.
Mihai -
How can I remove a non-existent target ESX server from the list of vMA?
I added some ESX servers at VMAs using "lt & sudo vifp addserver; hostname & gt; ». These servers have been removed before removing the VMA. Since they are not online, I get the message when you do "sudo vifp removeserver & lt; hostname & gt; "below. How can I remove them from the list of targets vMA? Thank you.
Error: Unable to connect. Please make sure that the server is in place and is a supported version.
If you are using the latest version of vMA 4.0, you should be able to do the following:
sudo vifp removeserver
--force When it ask for password, just type in whatever she should remove just with strength of the management host.
You can also take a look in the vMA configuration file that keeps track of hosts under management and erase the old entries:
/ etc/VMware/viconfig/viconfig. XML
/ Home/VI-admin /. VMware/credstore/vicredentials. XML
Who gives a try and see if it helps, it is always advisable to withdraw before the host decommission but option 1 work usually, from what I've seen.
=========================================================================
William Lam
VMware vExpert 2009,2010
VMware scripts and resources at: http://www.virtuallyghetto.com/
Introduction to the vMA (tips/tricks)
Getting started with vSphere SDK for Perl
VMware Code Central - Scripts/code samples for developers and administrators
If you find this information useful, please give points to "correct" or "useful".
-
How to make a backup of the database with RMAN Oracle Single Instance
People,
Hello. I use the server of Oracle 11 GR 1 material with operating system Oracle Linux 5.10 database.
I understand how to back up the database instance in SQL Server with Windows. But do not really understand how to back up the database instance in Oracle on Linux.
I did it cold and hot backup for the database HRCS90 instance, but both receive the same error message.
Cold backup is below:SQL > startup
ORACLE instance started.Total System Global Area 538677248 bytes
Bytes of size 2146024 fixed
528482584 variable size bytes
4194304 buffers of data bytes
Redo buffers 3854336 bytes
Mounted database.
Open database.
SQL > shutdown immediate
The database is closed.
The database is dismounted.
ORACLE instance stops.
RMAN > backup database;From backup 25 November 13
using the control file of the target instead of recovery catalog database
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the backup command to the 25/11/2013 14:26:52
RMAN-06171: not connected to the target database
RMAN > backup HRCS90RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-00558: error occurred during parsing of order entry
RMAN-01009: syntax error: found 'distinctive sign': expected an of: ' archivelog, auxiliary, as, backup backupset, blocks, channel, check, copy, copies, controlfilecopy, cumulative, current, basic data, datafile, datafilecopy, device, diskratio, db_recovery_file_dest, db_file_name_convert, duration, filesperset, for, format, from, full, strength, file, incremental, keep, (, maxsetsize nochecksum, noexclude, nokeep, not, proxy, pool, re-use, recovery, section, skip). ', spfile, skip readonly, setsize, tablespace, tag to validate.
RMAN-01008: the identifier of the AfDB was: HRCS90
RMAN-01007: line 1 column 8 file: entry standard
RMAN > backup database HRCS90RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-00558: error occurred during parsing of order entry
RMAN-01009: syntax error: found 'distinctive sign': expected an of: ' archivelog, auxiliary, backupset channel, copy, controlfilecopy, backup, common, base data, data file, datafilecopy, remove, diskratio, db_recovery_file_dest, filesperset, format, force, file, include, keep, (, maxsetsize, noexclude, nokeep, not, pool, more reuse, recovery, section, skip, spfile, pass readonly, setsize, tablespace, tag, to).
RMAN-01008: the identifier of the AfDB was: HRCS90
RMAN-01007: line 1 column 17 file: entry standardWhile the instance of database HRCS90 is starting, I do hot backup by using the same commands and get the same error message with above cold backup.
My question is:
Can any folk tell me specific steps (order by order) to back up a single instance of the database in Oracle with RMAN?
Thank you.Yes, you can restore and recover the backup, but not at the moment. You will only be able to restore and recover at the time of your backup.
For example.
If you take backup (mount point with no mode of journal archive) at 06:00 and your grave database crashes at 21:00, you will be able to restore and recover until 06:00. You will find all the changes made to the database between 06:00 and 21:00.
If you want your database to recover until 9 PM or until a point in time, then you must put your database in log mode archive, and then save the archives.
-
RMAN Duplicate - ORA-01092: ORACLE terminated instance. Disconnection forced
Source DB - 11.2.0.2.0
Target DB - 11.2.0.2.0
OS - SunOS 5.11
Hello guys I'm trying to restore a database by using a duplicate order. Here are the scripts that I use.
This is the script in which the restore.cmd is called.
-----------------------------restore.sh--------------------------------------------------------------
#! / usr/bin/ksh
#PATH $PATH = "" / usr/ccs/bin: / usr/bin: / usr/sbin: / usr/sbin/nsr: / usr/ucb: / usr/ucb: / etc: / usr/local/bin ""
#LD_LIBRARY_PATH = / usr/openwin/lib: / usr/ccs/lib
#export PATH LD_LIBRARY_PATH
GET_DATE = 'date "+ %y %d hour %M %s %m" '
CHK_DATE = "date"+ %y %m %d"'"
GET_YEAR = "date" + %y' "
GET_DAY = "date"+ %d"'"
Etiquettemois = "date"+ %p"'"
GET_MONTH = "date" + %m' "
ORAENV_ASK = NO
#. / usr/local/bin/oraenv
. $HOME/.profile
echo ${ORACLE_SID}
################################################################################################################
echo $ORACLE_HOME $DB_NAME $ORACLE_BASE
Export ORACLE_HOME, ORACLE_BASE DB_NAME
EXPHOME = / export/home/oracle
CLN_Home = / export/home/oracle
job_log_file = "${EXPHOME}" / rman_restore.log ' "
Add $(ORACLE_HOME) / bin/rman trace = / export/home/oracle/monsuivi msglog ${EXPHOME} / rman_restore_msg_log.log < <!
auxiliary connection.
Set the dbid = 5798365608
echo setting
@${CLN_Home} / restore.cmd
output
!
Shortly after the spfile is restore, I get the following error.
DOUBLE RMAN ERROR-
connected to the auxiliary database (not started)
Oracle instance started
Total System Global Area 8554127360 bytes
Bytes of size 2175440 fixed
5117054512 variable size bytes
3170893824 of database buffers bytes
Redo buffers 264003584 bytes
Call krmmmai krmmpem
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-00601: fatal error in the Recovery Manager
RMAN-03004: fatal error when executing command
RMAN-04006: auxiliary database error: ORA-01092: ORACLE terminated instance. Disconnection forced
RMAN-03002: failure of Db in dual at 27/12/2013 12:18:10
RMAN-05501: abandonment of duplicate target database
RMAN-03015: an error has occurred in the script stored memory Script
ORA-03113: end of file on communication channel
-TRYING to solve the error-
When I checked google, said some, it could be undo tablespace issue, so I put the undo_tablespace parameter in the same as source target. Here again, I was getting the same error.
The source database has not being upgraded, if this isn't a problem with the upgrade.
can give any output as to how this problem can be solved?
Thank you
First: DUPLICATE is NOT restore!
Second: If a database hits ORA-1092.
There will be errors in the alerts log.
Before even this announcement, you should examine the error online and browsed the alert.
Troubleshooting is any dumping using ctrl-c/ctrl-v and sitting with your shoes on your desk and your hands behind your head to whistle and wait for replies to come.
-----------
Sybrand Bakker
Senior Oracle DBA
-
How can I create a cluster of two instances that are running on the same server?
Hello
I can't find how to create a cluster or even a rule of failover for my two instances that are running on the same server ODSEE 11 GR 1 material.
Could you please help?
Thank youHello
Clustering (intended as Sun Cluster, Veritas Cluster, etc...) IS NOT supported since 7.0:http://docs.Oracle.com/CD/E20295_01/PDF/821-1216.PDF [page 20]
and, according to my own experience, is the WORST way to achieve high availability of Service LDAP directory and in a way almost CONCEDED for replication problems in your topology (lock, split, re-init, etc...).
Please use the "application level" collection that you get out of the box with the multimaster replication.
http://docs.Oracle.com/CD/E20295_01/HTML/821-1217/index.html
http://docs.Oracle.com/CD/E20295_01/HTML/821-1220/fhkry.html#scrolltoc
HTH,
Marco -
Create a second instance for Oracle 11 g on Windows Server 2008
Hi gurus.
I'm happy to be called a noob to this but could someone please help me. I would like to install\create a second instance of Oracle database on a Windows Server and I was wondering how to do this. Just use DBCA? And are there pitfalls that I should be looking out?
I did once on an OEL5 install and I had to change environmental variables, but I think that the process is much easier on a machine under Windows environment.
Help, please.
Thank you800166 wrote:
Thanks for the reply.If I create all the installation first and then create the second instance using dbca and what do you mean when you say properly configured net sql
TNSNAMES. ORA must contain at least one entry for each instance
-
How much memory to use an instance of SOA?
Hello!
Is it possible to know how much memory is using an instance in Oracle SOA Working? Or at least, an application on a WebLogic Server?
Greetings, Peter.Peter,
You can monitor the memory usage of all JVM running the application server, but there is no way to understand that the amount of memory has been attributed to a particular application / instance running on this server.
Kind regards
Anuj -
How to plan an oracle server?
Hi all
I'm running a server with the following configuration
System model: IBM, 7998-61 X
Processor type: PowerPC_POWER6
Implementation of processor mode: POWER 6
Version of the processor: PV_6
Number of processors: 4
Processor clock speed: 4005 MHz
Processor type: 64-bit
Core type: 64-bit
Memory size: 31616 MB
Good memory size: 31616 MB
Firmware of platform level: not available
Firmware version: IBM, EA340_075
Console connection: activate
Auto Restart: true
The heart: false
In the server, I have the following Oracle10g database
Size of the database in GB
Bank01 8
Bank02 7
Bank03 7
Bank04 44
Bank05 9
Bank06 13
Bank07 4
Bank08 7
Bank09 4
4 Bank10
Bank11 8
Banque12 16
Bank13 36
Bank14 8
These databases used to test the application.
How can I make "capacity planning" on the server?
For ex: if I create a new database, I get "fork function failed.
Thanks in advance
KSGRefer to the [Concepts of Oracle® database | http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/toc.htm] guide, specifically for architectures of process and memory, to see what is the footprint of resource base of an Oracle instance.
Read [this thread | http://asktom.oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:4347545437371] on astom.oracle.com to see what is taken from a well-known Oracle expert on multiple instances on a single server.
-
How to exclude the Oracle Workflow installation CD companion server?
We are modernizing our E-Business suite 11i database to 10.2.0.3.
The E-Business suite upgrade request notice to install "Oracle Database 10 g products" Companion CD on 10g of the House. Oracle default workflow server is included in the guide installation with a CD Type 'Install a database Oracle 10 g products'. However the installation document CD companion says that don't install Server workflow on the database of trade electronics uite, as indicated below.
Now how can I exclude the Oracle workflow installation CD companion server?
================================
Note: Do not install Oracle Workflow Server in Oracle E-Business
Office database. If you want to use the version of Oracle Workflow
available with Oracle Database 10g, or any Oracle database
components that depend on the version of Oracle Workflow, then you
need to install the Oracle of Workflow Server in a database that is not used
Properties of an instance of Oracle E-Business Suite.
For an Oracle E-Business Suite database, you can continue to use the
version of the Oracle Workflow Server integrated in Oracle E-Business
Suite.
================================John,
You should ignore the steps under "Preparing Oracle Workflow Server for the Oracle Workflow Middle Tier Installation", but the workflow will be installed as part of the accompanying CD (select option 2 - products of Oracle database)
Upgrade of Oracle Applications 11i database 10g R2 (10.2.0.3)
http://Oracle-Apps-DBA.blogspot.com/2007/09/upgrade-Oracle-Applications-11i.htmlHere is the link for the steps you need to jump:
Prepare mid-level Workflow Oracle Oracle Workflow Server Installation
http://download.Oracle.com/docs/CD/B19306_01/install.102/B15664/install_sw.htm#BABHHHCC -
Hello
I was wondering if you could help me.
I'm trying to find out how to export a .sql file, I created from Oracle Application Express of SQL Server Management 2012? I'm not very technical, but it seems that the Oracle code does not work with SQL Management Studio when I drag the file inside.
I need the database Oracle express and its data to enter in SQL Management Studio, so any help would be much appreciated!
Thank you.
Hello
Your question is beyond the scope of this community.
Please repost your question in the SQL Server TechNet Forums.
https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer
See you soon.
-
Need to find a way to understand how DB2 connect to Oracle and mirroring of data etc.
Hi, gurus,
I just take over a source project which is the ICOMS as400 db2 database. Seems data mirro that CDC is used to replicate from DB2 to oracle.
I am very new to this CDC datamirror, more I am new to figure out how db2 connect to oracle, it is only through db link or what? or is it tnsnames entry?
I wish someone in this forum can point me in the right direction.
Thanks in advance.
Hello
What do you not sure about?
If Oracle can be the site of conduct, you can use the gateway for DRDA database and we can help you with that. If you need assistance on setting up DataMirror CDC to connect to Oracle, then you will need to contact IBM because it is one of their products.Kind regards
Mike
-
How to automatically start Oracle on SUSE Linux
I have Oracle 11g installed on a server running SUSE Linux 11. I followed the official Oracle instructions to try to implement the Oracle for an automatic start.
My/etc/oratab file contains the following:
sidname:/opt/oracle/product/11gR2/db:Y
I created a /etc/init.d/dbora file that contains the following:
#! /bin/sh -x # # Change the value of ORACLE_HOME to specify the correct Oracle home # directory for your installation. ORACLE_HOME=/opt/oracle/product/11gR2/db # # Change the value of ORACLE to the login name of the # oracle owner at your site. # ORACLE=oracle PATH=${PATH}:$ORACLE_HOME/bin HOST=`hostname` PLATFORM=`uname` export ORACLE_HOME PATH # if [ ! "$2" = "ORA_DB" ] ; then if [ "$PLATFORM" = "HP-UX" ] ; then remsh $HOST -l $ORACLE -n "$0 $1 ORA_DB" exit else rsh $HOST -l $ORACLE $0 $1 ORA_DB if [ "$PLATFORM" = "Linux" ] ; then touch /var/lock/subsys/dbora fi exit fi fi # case $1 in 'start') $ORACLE_HOME/bin/dbstart $ORACLE_HOME & ;; 'stop') $ORACLE_HOME/bin/dbshut $ORACLE_HOME & ;; *) echo "usage: $0 {start|stop}" exit ;; esac # exit
So I ran the following commands:
chgrp dba /etc/init.d/dbora chmod 750 /etc/init.d/dbora ln -s /etc/init.d/dbora /etc/rc.d/rc0.d/K01dbora ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/S99dbora ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/S99dbora shutdown -r now
After the reboot, Oracle did not work:
server:~ # ps -fea | grep ora root 2681 2563 0 21:18 ? 00:00:00 hald-addon-storage: no polling on /dev/fd0 because it is explicitly disabled root 2688 2563 0 21:18 ? 00:00:00 hald-addon-storage: polling /dev/sr0 (every 2 sec) root 4491 4333 0 21:19 pts/1 00:00:00 grep ora server:~ # ps -fea | grep lsnr root 4493 4333 0 21:19 pts/1 00:00:00 grep lsnr
Oracle works very well after the start of the instance (by logging in as "sys as sysdba" sqlplus and the command 'boot') and the listener. But it will not start automatically after the server is restarted. Why is this?
I got it to work. I had to change the file released to look like this:
#! /bin/sh -x # # Change the value of ORACLE_HOME to specify the correct Oracle home # directory for your installation. ORACLE_HOME=/opt/oracle/product/11gR2/db # # Change the value of ORACLE to the login name of the # oracle owner at your site. # ORACLE=oracle PATH=${PATH}:$ORACLE_HOME/bin export ORACLE_HOME PATH touch /var/lock/subsys/dbora case $1 in 'start') su - $ORACLE $ORACLE_HOME/bin/dbstart $ORACLE_HOME & ;; 'stop') su - $ORACLE $ORACLE_HOME/bin/dbshut $ORACLE_HOME & ;; *) echo "usage: $0 {start|stop}" exit ;; esac # exit
Then I had to delete the files auto_listener.sh and startup.log in $ORACLE_HOME because they were incorrectly owned by root.
-
Title says it all!
How can I select all instances of a component in the timeline at once without manually shift + click each instance?
The reason why I want to do this is because I have a video clip with MANY quick cuts. So the clips are cut out and splattered everywhere. I'm color correction now and so I want to be able to select a clip around wherever it exists in the timeline so I can drag the effect on all the at once, without having to search each occurrence of the item in the timeline panel. This lot "select" would make it so I don't miss not all instances of the clip and saving a ton of time going through the timeline and Shift clicking whenever the clip is also up.
I hope that the PP is smart enough to do this
Thanks in advance!
-Tim
Choose a single instance of the element, perhaps even the first bit... and use the new Master Clip feature... Firstly here is a written explanation and a video tutorial on this operation... This is a great feature.
Adobe Premiere Pro help. Master Clip effects
How to apply effects to all instances of a clip. Adobe first Pro CC tutorials
Neil
-
How to compile procedure Oracle procedure throught ODI
Hello
Can someone help me how to compile procedure oracle through ODI11g
I'm Aguerre, how to call the oracle in ODI procedure and run it.
Please help me
Kind regards
PhanikanthHello
We can invoke step by odi procedure below.
modify the
procedure compile Thank you
Anuradha
Maybe you are looking for
-
I deleted all my photos and music from my mac and moved to my time capsule. It still shows my hard drive as full? I have to format
-
Satellite P100-324: How do I get the BIOS to version 2.40
I have the Toshiba Satellite P100-324 with BIOS version 3.30. I need to downgrade the BIOS to version 2.40 because it help with the problem of stuttering when playing under Windows Vista. But the problem is that the version 2.40 is not available to t
-
Hi, I had this card for about a year now use it in my Galaxy S3 (Bell/Canada version) and recently my phone hangs / crashes at start up and forced factory me reset my phone several times. This post is not on my phone, however, it is on my sd card. It
-
If I uninstall the ATI graphics driver, is it OK?
I read that there could be problems with the help of the automatic update to install the graphics drivers? That's what I used. In any case, I intend to uninstall my ATI graphics driver and reinstall it in the hope of fixing the problem of sleep. I wa
-
Deployment of BPM from Oracle applications
HelloI want to deploy Application BPM using SAR file. I have two projects in my application of BPM, who conducted BPM and another are user interface for human task process. can you if it doesn't matter who you please let me know the exact step to do.