How to connect to VMware VSphere Hypervisor via the internet
Hello
I'll set up a server with VMware Vsphere Hypervisor and want to connect to the server via Internet, so not in my local network. If it can, what are the ports I need to open to you connect to the server somewhere else? And if I open this ports can I just connect to the server using my external IP, or what I have to configure something?
Welcome to the community.
First open it.
The ICMP opened between the source and destination. If there is a communication.
They then treat access esxi.
Port 443 for vsphere client connection esxi.
902 port to access the virtual machine console
port 22 for esxi PuTTY access.
see the link to the source for more information below.
http://KB.VMware.com/kb/1012382
Allocation of points for the useful and helpful responses by clicking on the sub tab
Tags: VMware
Similar Questions
-
Smart Array controller, required for VMware vSphere Hypervisor
I currently use VMware Server on Windows 7 for my test enviromnent. I would like to set up a server using the VMware vSphere Hypervisor. The server is an HP Proliant ML110 G7. The server has 4 GB of memory, single core processor quad intel (E3-1240), Intel 82574 Gigabit NIC , and an integrated HP Smart Array B110i SATA RAID Controller. This Smart Array B110i controller will work with the latest version of the hypervisor? Version 4.1 documentation controller HP Smart Array under ESXi hardware required but then lists it list a Smart Array P400/256 controller under installation on supported and start of storage systems.
As far as I can see the server itself, the Integrated NIC (NC112i) or the RAID controller are supported with ESXi (not even on older versions). I really recommend you take a look at the VMware HCL (http://www.vmware.com/resources/compatibility/search.php) or matrix of Support from HP (http://h18004.www1.hp.com/products/servers/vmware/supportmatrix/hpvmware.html)
Regarding RAID controllers. Make sure that the controller is equipped with at least 512 MB BBWC/FBWC for a good disk performance. Addition of write cache, makes a HUGE difference.
André
-
Can't active VMWare vSphere Hypervisor 6.0
So I registered on the Web site, go to downloads > free downloads > vSphere Hypervisor and I downloaded the VMware vSphere Hypervisor 6.0 and installed on my server. On the same page that the download link, it gave me a license key to use. Then, I downloaded the client and connected to my server. After login I get a pop-up stating "your evaluation license expires in 60 days. There is a blue link that says: 'Assign a license to the ESXi host' but when I click on it, my browser opens and need me just to the home page of VMware. If I click OK and that the box disappears, then there is no place on the interface for me to register the product. What I'm missing here? Screenshots included
And I literally just thought to it right after I posted this. I had to click on inventory > Configuration tab > features licensed > Edit > assign a new license key to this host. Not sure why they bury him like this, but happy, what is done today. Thank you
-
I'm new with VMware. I have a DELL T420 server without an operating system in it. I have a question, this first step, I need to install Windows 2012 R2 Datacenter to my server DELL T420, then the next step I will download the upgrade to VMware vsphere Hypervisor 5.5 2, is that correct? I thank in advance for your advice.
1. you must first download ESXi (hypervisor) and install it on your server.
: Refer:vSphere 5.5 - How to install and configure VMware ESXi 5.5 - YouTube
2. once the ESXi installation is successful, you can create a VM and then install windows 2012 R2 in this virtual machine as GOS.
See:How to create a VM on a VMWare ESXi host using a VSphere Client - YouTube
Let me know if you need help
-
Convert new Vmware server for VMware vSphere Hypervisor 3.5
Hello
Can someone tell me how to convert a more recent VMware Server to make it work with an older VMware vSphere Hypervisor 3.5?
I just installed this version on an old IBM xseries 346, but I can't turn on the virtual machine. When you check the log it is said that the version is not compatible.
Can you also tell me how to get rid of the warning of a 60-day trial. This version should be free?
Thanks in advance
You must go to the directory of the virtual machine before you can issue the vmkfstools command.
CD/vmfs/volumes/datastore1/MSTS01
André
-
Upgrade to VMware vSphere Hypervisor 5.0 (free) to support clients of Windows 8
How can I free upgradethe VMware vSphere Hypervisor 5.0 (build 469512) in support of Windows 8 comments VM?
Concerning
Marius
Hi, you can evolve into the final level of patch by CLI
Click here for a How - to: http://communities.vmware.com/people/vmroyale/blog/2011/09/15/updating-esxi-5--single-use-esxcli-how-to
-
Upgrade VMWare ESXi VMware vSphere Hypervisor 4.0.0
Hello
Is it possible to upgrade 398348 for the new VMware vSphere Hypervisor, the free version of VMWare ESXi 4.0.0?
How would I go all upgrade without losing the virtual machines that are currently in the data store?VMware ESXi hypervisor and share binaries of same exact. It is only the license key that locks or unlocks various features. Then switch between editions is basically just replace the license key.
Because the binaries are the same for all editions, for example the 4.1 version update procedure is the same too. Just follow the link DSTAVERTS the Guide to upgrade (search for vihostupdate).
André
PS: You can also take a look at http://blog.peacon.co.uk/wiki/Upgrading_ESXi_4_to_4.1 which includes the steps of the update
-
VMware vSphere Hypervisor 6.0 NIC not recognized
Hi all
I intend to install VMware vSphere Hypervisor 6.0 in my own office, but the network adapter may not be recognized. My network card is Realtek rtl81111C, which is integrated in the motherboard Gigabyte. I want to buy a network card, could you suggest a good market (PCI, PCIe two OK) which is supported for VMware vSphere Hypervisor 6.0 for my office?
Hello
You can search for network cards supported here: http://www.vmware.com/resources/compatibility/search.php?deviceCategory=io
If it's just for the study, you might also install VMware Player or workstation (the player is free for commercial nun) and run the vSphere Hypervisor as a virtual machine.
Does not give you optimal performance, but to study it is enough, and you don't need hardware supported for ESXi.
Tim
-
Can I use VMware vSphere Hypervisor™ with vSphere Client?
It's the question next poped upward.
-Can I freely use for my business need VMware vSphere Hypervisor™, and what will be the difference with VMware vSphere Starter Kit?
and
-Can I use VMware vSphere Hypervisor™ with vSphere Client software for free?
Yes - it is freely permitted, but he he has limits and lack of features compared to the vSphere Essentials kits. Another thing to note is the absence of vCenter Server to manage multiple ESXi hypervisors with the free version. The backup API are, in my opinion, one of the main obstacles to the use of this.
-
You can run Citrix Xendesktop on VMWare Vsphere Hypervisor?
Hello
I was wondering if you can run Citrix Xendesktop on VMWare Vsphere Hypervisor free version that does not VCenter.
And can upgrade you VMWare Vsphere Hypervisor to Vsphere upgrade without losing existing virtual machines running on Vsphere Hypervisor?
Not sure about your first question.
But the second question is a definite yes: simply type in a key license and she. No resettlement, no lost of virtual machines, without interruption.
-
VMWare View on VMware vSphere Hypervisor
Hello
VMWare View can run on VMware vSphere Hypervisor (free version)?
As written, you have vCenter Server and vCenter does not free ESXi...
There are only two solutions:
- buy a package of vSphere with vCenter and view ESXi AND the licensing module
- buy full them see packages that also include the part of vSphere
-
Install VMware vSphere Client on the domain controller computer
Hi team,
How to install VMware vSphere Client on the domain controller computer? Can someone guide me?
Thank you
John
Please follow this link:
http://www.vmwarearena.com/2015/01/how-to-install-vSphere-client-on-domain-controller-machine.html
Thank you
Venance
-
I lost my msn icon after the upgrade to windows 7. How I connect msn plsu? What is the web address?
Hello
I suggest you to contact MSN customer support for assistance.
Here is the link for "how to contact MSN Support.
http://support.Microsoft.com/kb/940784
I hope that helps!
-
Unable to connect via the Internet to my ESXi server. Help, please
Hi, I had a server ESXi 4.1 at home. When I try to connect via the Internet, it is not working.
I put ESXi server to firewall and still, I can't ping my server even.
No idea why?
Kind regards
Pawel Lenart
Sit behind your firewall router esxi, transfer 443 to esxi management IP and ensure that management network vmkernel has the internal IP address of router as its default gateway.
Please give points for any helpful answer.
-
How to add records to a file via the file adapter.
Hi all
How to add records to a file via the file adapter.
I must read data from the database and need to add all the records in a file.
Thanks in advance.Hello
I think you have a while loop to hit the DB in your process (as you said you need to extract data from DB 10 times if 1000 rec is here)
First sopy your DB O/P to a var
and second time add to previous data. (Otherwise you can directly use Add to start instead of copy and add)
When the loop ends, you can turn to the file adapter Var.Otherwise, you can configure yourFileadapter as it will be aapend current recordings for previous records.
You can use 'Append = true' in your adapter wsdl file.
It will add the previous records to existing records in the same file.Concerning
PavanKumar.M
Maybe you are looking for
-
After watching the two videos uTube yesterday, I clicked the option "pin tab" so that I could watch them again and closed the program. Now, I find that the sound of these videos is read automatically when I launch Firefox. Can't find TABS anywhere, s
-
Every time I open FF, I lose my status bar.
-
My system is very difficult to start.
I use Windows Vista and receive this message every time I start my computer: C:\Windows\sytem32\config\sytemprofile\Desktop is not accessible, access is denied. I have to keep in the severla system reboots before I get it's normal. I tried the system
-
external device is not detected when you connect to a personal computer.
Windows 7 pro, pen drive sound edition does not detect when you are connected.
-
How to recover administrator privileges?
Original title: lost Admin rights! Minimator started programming & has tinkered with 'ways', now that I've lost admin rights cannot download anything or delete files! A way to get administrator rights?