How to connect wireless bluetooth nokia bh 503 headset to compaq presario cq42?

Similar Questions

• How to connect the bluetooth iball-groovy head game

  How to connect the bluetooth iball-groovy head game

  Hi Gurushankar,

  You can consult the following articles and check.

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

   

  Add a Bluetooth device or other wireless or network device: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  Hope this information helps.

• How much memory can I put in 2002 Windows XP Compaq Presario 6000?

  How much memory can I put in 2002 Windows XP Compaq Presario 6000?

  TIA!

  It depends on your hardware.

  See http://h10010.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=bph03886&printable=yes&product=96113#N141 for official instructions.

  If you need more help on HP hardware, ask on the forums of HP support.

• earpiece/headset bluetooth Nokia BH - 503 connection problem in windows 8

  After you have installed windows 8 in my laptop, I've just matched with my nokia BH-503. But after cutting the first time, I don't then reconnect with my laptop. My windows is already updated, but still, I am facing this problem. Even now when I try to add my audio device my laptop can not find this. But I can easily connect this audio device with my laptop and windows 7. So eventually, I'm sure that WINDOWS 8 I have this problem. I already searched a lot information of websites & questions, answers, but still this problem have no solution.  Its very sad news for users of windows 8. :(

  Headphones Audio/stereo/headset BLUETOOTH Connection with WINDOWS 8

  
  
  
  
  Hi! It's Pranzell. Guys, it's like a very simple. Here, follow my steps :
  
  
  1. Switch Off your bluetooth device. Any device, just turn it off.
  2. now the charms blow bar and open settings ->  change the settings of PC-> devices.
  3. keep it button / STOP for 8 seconds or more until a BLUE led flashes and Flash.
  4. your device came into PAIRING MODE, quickly, click "Search devices" in your computer.
   
  5. remember the blue led of your device blinks just 3 minutes (Nokia/hTC/Blackberry/Jabra/Phillips) search and pair your device in this time only.
  6 install/update the drivers manually if necessary. W8 is usually installed in everthing.
  7. the pairs! You will receive a notification, "added stereo Audio Gateway".
  8 open the Panel of control-> hardware and sound-> sound-> the Read tab.
  9. right click on the new added device and assign as the default value. 
  10 say thank you!  :)

• How to connect to bluetooth speakers in windows 7. the speakers are broken, but where do I select them as an audio on the device?

  I have connected to my Belkin I 78 audio device, it is paired with my Acer laptop, but the device does not appear in the settings as an alternative the device sounds. The ability to use Audio service is selected on the Belkin device in the bluetooth settings.
  The Belkin unit works very well with my Windows mobile and my Android tablets and phones

  Hello

  Note: Check if the Bluetooth speakers are listed in Device Manager.
  
  Method 1: Run the hardware troubleshooter and check if that helps.
  Follow the below mentioned article:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
  Method 2: Follow the steps mentioned below:

   

  (a) right click on the speaker in the taskbar icon.
  (b) click on playback devices
  (c) right-click on the empty space
  (d) select Show disabled devices and Show disconnected devices
  (e) see if the Bluetooth speakers are visible.
  (f) if they appear, select and make a default device.
   
  Method 3: Install the software that came with the speakers, then check.
   
  Reference:
   
  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices 
   
  Note: The article also applies to Windows 7.
   
   
   

• How to connect wireless hp j6450

  I CAN'T IT CONNECT WIRELESS AND IM NOT ABLE TO USE THE SCANNER ANY HELP WOULD BE GREATLY APPRECIATED THANKS

  What router?  What operating system?

  To connect to the router, on the front of the printer: Setup > network > Wireless Setup Wizard.  Once the printer is connected to the router (wireless network), we can work on the connection of your computer, whatever it is.

• Windows 7 problem of bluetooth connectivity with bluetooth for Skype-ing headsets?

  I've read similar questions on the form, and unfortunately I could not find an answer to my question. Starting from 01/12/09, I upgraded to windows 7 home edition with minor compatibility issues (negligible). But, before installing windows 7 I was able to use my headset bluetooth with Skype. Now, sype does not recognize this connection between pc and my bluetooth headset. Ironically enough my pc has allowed for the configuration of my listener. my headset is appointed to be my helmet without wireless/bluetooth for use with Skype or any other program from my PC. In addition, my PC is allowing and acknowledging the connectivity between my PC and the bluetooth headset but not Skype. I tried to reconfigure Skype, but have failed to prove any changes to the default settings. your help is greatly appreciated.

  Windows Update has nothing to do with the upgrade of Windows or your problem. Contact the Skype Support or try to repost your question here: http://social.answers.microsoft.com/Forums/en-US/w7install/threads

  PS: Is Skype in Win7/IE8 still supported? ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• my bluetooth does not work on my compaq presario CQ62

  my Bluetooth is not on my compaq presario CQ62

  Hello

  1. what exactly happens when you try to connect the Bluetooth device on the computer?

  2. you get any error message?

  3 have there been recent changes to the computer before the show?

  I suggest to follow the steps provided and check if it helps.

  Method 1: Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: If the problem persists try update the driver:

  a. click the Start button.
  (b) in the search box type Devmgmt.msc and then press ENTER.
  c. Select Bluetooth peripheral device and right click on it.
  d. now, select Update.
  e. restart your computer.

  Method 3: also I suggest to add as peripheral to your Bluetooth computer and later check the required services running on your computer.

  Add a Bluetooth device to your computer:

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Change settings for a Bluetooth compatible device:

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  Hope this information is useful.

• Is connected to the Internet, but cannot use the Compaq Presario SR5123WM desktop PC

  Product name & #: Compaq Presario SR5123WM desktop PC (GC660AA-ABA)
  Operating system: Windows Vista Home Premium 32
  No only error message when Internet Explorer does not display the page or iTunes can't find any connection network (any application that requires an Internet connection).

  No changes were made to the system.

  I have the dial-up connection. The Bureau uses the Modem - PCI Soft Data Fax Modem with SmartCP (COM3).

  Once I start the computer, log in to my user and connect to the Internet, I click on Internet Explorer and type in Google to see if it would work. It is said that "Internet Explorer cannot display the webpage". For iTunes, he would say "iTunes has not to connect to the iTunes Store." Make sure your network connection is active and try again. »

  I tried all solutions online and by phone. I reset netsh int ip / winsock. I reset Internet Explorer options. Nothing works.

  What is strange, is that the Internet connection works well on my laptop (using Conexant D110 MDC V.92 Modem (COM3)).

  It would be GREAT if you could help me find a solution to this problem, because this has happened for months, and I'm tired of waiting. I put all my hopes on you.

  You may be able to do a system restore if the original HP partition is always on the computer.

  Here is a document detailing the steps:

  Perform a recovery of the system (Windows Vista) HP

• Link to find out how to replace the battery in the clock on laptop Compaq Presario 1247

  Once upon a time, I had a link to a guide who offered guidance on how to access the motherboard in order to replace the battery in the clock on an old laptop Compaq Presario 1247. Can anyone provide this link?

  Hello

  This should be the Guide of maintenance & Service you're looking for.

  Kind regards

  DP - K

• Satellite M70-122: can I connect phone bluetooth nokia HDW-3 head?

  I have laptop toshiba M70-122.

  If I buy a bluetooth flash drive then connect nokia HDW-3 micro?

  only microphone can I connect & if I can then how?

  Hello

  Unfortunately, I m not a Bluetooth specification but I have read on some Web sites that it should be possible to connect the nokia headset to the laptop with the Bluetooth device.
  It depends on the material.

  Please check this Toshiba document why the Bluetooth headset is not working.
  http://APS.toshiba-tro.de/Bluetooth/pages/FAQ/headsetnotworking.html

• How to connect wireless the WRT54GS

  I have a router WRT54GS I want install Wireless with my Windows XP desktop that has only an installed wireless adapter. There is no ethernet on the pc port. I have reviewed the Stickys are and read that FAQ, but still did not find a response stating clearly how to set up the router without using an ethernet cable connected to the pc. I want to be able to access the configuration page based on the web as well for what I can fix my settings. Any help would be greatly appreciated.

  As a general rule, it is best to configure the router using a wired connection to be sure that you set up your router and not someone else... So if you have any wired ethernet device, it is best to use it rather than try a wireless only configuration.

  You can set only through wireless, however, you must ensure that you are connected to your router at the beginning. More simple test would be to unplug your router power and control for available wireless networks. If there is still a "linksys" network to be seen, you must be very careful.

  Anyway, and then reconnect your router to power. Do your research to computer networks and connect to the network not secure "linksys". It is best to put the computer near the router to do this to make sure that you connect to your router.

  Then open the web interface at http://192.168.1.1/ default password should be "admin", no required user name.

  To be sure, it's your router, go to the status page, see that it's really a WRT54GS and check MAC address, that you see here. It must be identical to that printed in the WRT (maybe one or two off the coast in the last digit). If it comes from a completely different MAC address, check local and SubTabs wireless network and MAC addresses there. If all MAC addresses are completely different, unplug the router from the power and see if your computer is always connected to the interface web or not.

  Anyway, once you have established this really is the web interface of the router, check the version of firmware and on the router and that is available online. It is better to update the firmware before doing the configuration. If you have the latest firmware, you must configure the router. I recommend the following steps:

  1. go to the wireless page. Change the SSID to something unique. Save the settings.

  2. you will lose the connection. Redo your computer search for networks. You should now see the new unique SSID. To connect to this network and reopen the web interface.

  3. then set up wireless security. Enable WPA2-Personal with AES encryption and set a strong password. Save the settings. You will lose the connection.

  4. now, you have to reconnect. Depending on your computer and use the software to set up the wireless, you may need to remove the unique SSID firstly in the preferred network list before you can reconnect. Usually, the computer remembers the SSID joined before and does not connect if security settings do not match the one used before. But you should know that.

  5. as you are still using XP the computer may not support WPA2 and AES encryption (which is the best and strongest that you can use today). So, if you're absolutely not able to reconnect to the computer you will need to reset the default router by pressing the reset for 30 seconds button and start over. Then choose personal WPA with TKIP and a strong password. It should work. I would not recommend to use WEP is easily broken.

  6. Once you have successfully set up your desktop to connect to your secure wireless network, you should make a change more: change the password for "admin" on the configuration page "Administration".

  7. don't forget to clean the list of preferred wireless networks, in particular, do not forget to remove the network "linksys" to this list. Otherwise, your computer can automatically connect to a network "linksys" if one comes available nearby.

  This should be it.

• Unable to connect wireless Bluetooth keyboard with the iMac

  After researching for a numeric keypad for my iMac (OS X version 10.6.4), I decided to get a keypad wireless Microsoft due to many positive reviews from Mac users. I tried to connect the camera today: 1) turned on the numeric keypad) 2 Mac software came on and recognized 'Microsoft BlueTooth number Pad' 3) a password has been generated) 4 ' synchronization attempt failed"I tried several times with the same result.  I realize that I am a Mac user, but I would give it a try since the system of thought is a Microsoft product. Any help would be appreciated because I would REALLY use it!

  Hi mfranken.

  As you have is on Mac operating systems, I suggest that you contact Apple for assistance.

  http://www.Apple.com/support/osFamily/

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to connect wireless to hide United Nations

  I can't connect to my wireless beause my wireless profile says that it is hidden-how I do a hide my connection?

  I can't connect to my wireless beause my wireless profile says that it is hidden-how I do a hide my connection?

  Go to your wireless router and configure it to the SSID of the wireless network is broadcast. There is no reason to not broadcasting your SSID and it can lead to connectivity problems.

  http://TechNet.Microsoft.com/en-us/library/bb726942.aspx#EDAA

  Use encryption, WPA2 is highly recommended, and a long random ASCII of the keys to protect your network. Personally, I use WPA2-Personal, (WPA2-PSK [AES]) and an ASCII random 63 character key on both of my wireless home networks (private and invited).

  http://theillustratednetwork.MVPs.org/LAN/SoHoWirelessSecurity.html

• How to connect wireless scanner to new laptop?

  I have a wireless HP Photosmart 5510 printer/copier/scanner.

  It works perfectly with my new computer HP Pavilion laptop, but I can't understand how to add the scanner as a program on my laptop? Can anyone help?

  Hello. I have Windows 8.1. I did not install any software of printer/scanner on my new laptop - just conncetd to the print function when I started using it.  There is no icon on my laptop rpinter.