earpiece/headset bluetooth Nokia BH - 503 connection problem in windows 8

Similar Questions

• BlackBerry Smartphones the Motorola HS820 earpiece/Headset Bluetooth Audio works with the Blackberry Bold 9700?

  The Motorola HS820 earpiece/Headset Bluetooth Audio works with the Blackberry Bold 9700?

  It's not clear to me, if only the bluetooth Blackberry devices work with the Bold 9700, or any bluetooth device.  With the Bold 9700 recognize to ask the code four numbers when first by aligning it with the HS820?

  I matched two Plantronics, a Motorola and an earpiece/headset Cardo bluetooth with the 9700 and they work very well for phone calls, but I can't get the audio from Media Player to play on one of them.

• Unable to connect the earpiece/headset Bluetooth

  Original title: Bluetooth device

  Hello

  I use a computer windows 7 dell laptop and having succumbed to my last 10 attempts to connect my sony with her bluetooth headset. Also, I went through all the links of responses provided by the site. I also downloaded the software device for her drive. The laptop also shows my SonyBTH under "Devices and Printers". But I'm still not able to connect my SonyBTH even after clicking on the indicated device.

  Please kindly help me with this problem.

  Anyone?

  Thank you

  Afonso Rajalim

  Hi Afonso,

  Thanks for posting your query in Microsoft Community.

  I understand that you are unable to connect SonyBTH to the Windows 7 machine and I appreciate the efforts made in the patches that you tried. Let me ask you;

  • Have you been able to connect to the same SonyBTH in the past?
  • Remember to no particular change in the computer before the show?
  • What security software is installed on the computer?
  • What is the model number of your Dell computer?

  There could be several reasons for this cause and diagnose the problem, we will try these steps and check.

  Step 1: Make sure that Windows is configured to accept incoming Bluetooth connections.

  You can check the compatible devices Bluetooth configuration panel. Here's how:

  1. Click the Start button, select Control Panel, click hardware and sound, and then click Bluetooth devices.
  2. Click the Options tab, select the allow the devices to connect to this computer check box, and then click OK.

  Step 2: Remove and then reinstall the device:

  1. click the Start button, select Control Panel, click hardware and soundand then click Bluetooth devices.

  2 Select the device that is not working, and then click Remove.

  3. click on Add, press the reset button on the unit (or make it discoverable following the manufacturer's instructions), check the box my device is set up and ready to be found and then click Next.

  4. If the device is not found, repeat the previous step. When the device is found, select it, and then click Next.

  5. follow the remaining instructions in the wizard.

  · Make sure that the device is on and that the batteries should be replaced.

  · Make sure that the Bluetooth adapter for your computer is attached and turned on, and that the device is in use and detectable. If you don't know how to turn on discoverability, read the instructions provided with the device or check the manufacturer's Web site.

  Solving problems with Bluetooth devices compatible (applicable to Windows 7 as well)

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Numbering with earpiece/headset bluetooth problem

  I have a headset bluetooth jawbone and whenever my phone is locked (with fingerprints fingerprint and password), I can't make calls or even deal with it. The only way I can do anything, that's if I unlock my phone. When there is an incoming call, I can use the headset to answer, but other than that, nothing only works when the phone is locked.

  Y at - it an option that I have to toggle or is this just a problem with the phone itself?

  @zerotrunks,

  I'm having the same problem. Bike is addressing this issue. If all goes well it will be addressed in a future update.

• Error "adding the unit failed, resulting in an unknown error." 0x80004005"when you add earpiece/headset Bluetooth

  I'm having a problem new pairing my Bluetooth headset with my laptop.  I am running Windows 7 Enterprise 64.  I repeated this behavior with 2 different helmets.  Here's the problem:

  1. I pair the headset with my laptop and everything works fine
  2. I go to Bluetooth devices and remove the device from headphones
  3. I try then to pair the headset to the laptop and the error message

  I was not able to find anything online to help.  I spoke with the manufacturer (Plantronics) and they were also able to help.  Surely, there has got to be a way so he could pair up again.  I am desperate for help.  I really want to rebuild my machine just to get the headset to be paired again.

  Thanks in advance for assistance.

  Hi guys,.

  I could not pair either of my two headphones to my Windows 7 computer.  Here's what fixed it for me.  In devices, Radios, Bluetooth Manager, I opened the properties for my radio (2046 Broadcom Bluetooth 2.1 + EDR USB Device with First Connect).  On the Advanced tab, I took the dash on my radio name.  The headphones paired immediately after that.

  This is a pretty serious bug because the radio takes its name from the computer name, which is the name of user-PC by default when you install Windows 7.

  I hope this fixes your problems.

  Note that to actually use the headset, you will probably need to update your Bluetooth drivers if you haven't done so already.  Go to http://www.broadcom.com/support/bluetooth/update.php

• BlackBerry Z10 Default earpiece/Headset Bluetooth / output Audio Plug

  During the drive, I have a kit hands free bluetooth (speaker jabra) and I have the audio output taken mini plugged into my car for audio (stereo / music).

  During audio playback to my car, it uses the audio Jack very well, the problem is when I receive a call, I want to use the bluetooth headset device instead.

  Now when I receive a call, the audio of the call is routed to the mini taken and I have to manually select the helmet after answering the call which is a pain in the...

  Is there a way to set the default device for different outputs.

  for example

  Use the mini as the audio device output by default when the music plays.

  When I get a call, use the headset as default device bluetooth for phone calls.

  When I hang up, swinging back to the mini taken (because it is the default device for audio)

  In addition,

  I ordered the bridge thinking music that he could solve my problem.

  Will I have the same problem with it when 2 bluetooth devices are connected? for example, the audio gateway and my bluetooth headset.

  Should be able to assign the bluetooth services specific to the results of the default value.

  for example Audio > mini plug if it is present as a default value if no, he can use bluetooth

  Calls > bluetooth headset.

  Hope that makes sense.

  Dave

  The Blackberry music gateway solves this problem (kind of) works better... when the two jabra or any other headset device is connected and the music gateway is connected it muffles call correctly and works correctly...

  The new problem is introduced only if you have a headset (bluetooth or hands-free headset) that also supports music services. (The two compete to connect to theses services)

  I suggest buying a hands-free device that does not support music services (only a helmet) and then you should not meet for the problem below

  Read this new thread to see the solution to this new problem, if it still exists.

  http://supportforums.BlackBerry.com/T5/BlackBerry-Z10/Bluetooth-services-and-BB-music-gateway-enable...

• Portege M200, earpiece/headset Bluetooth

  Hello

  I have a portege M200 (M725) with a bluetooth adapter.

  I'm trying to connect my headset bluetooth Qware. It is recognized, but it doesn't connect. A message like "can't connect device.

  Would it be possible that the standard Bluetooth adapter does not support headsets?

  Please help our.

  You have the latest Bluetooth Stack & drivers installed?

• Windows connection problems and "Windows could not log in the Windows Event Service.

  September 14, 2014, I installed the hotfix for Windows (KB2590550).

  When I try to log on to a standard user account (not Admin), I would get an error that might say something like "Windows could not connect to the Windows Service Service event".  I click OK and then get a totally blank screen showing on the arrow of the mouse (which can be moved).

  Around this same time, when I was able to connect, I got a "not genuine Windows" pop up.  My windows 7 came factory-installed by Dell (Dec. 2011) and I got no re-imaging, re - install or repair since I got the computer.  I've also been running Symantec Endpoint Protection (version DoD) for 2011 as well.

  When I login as administrator (different account), I get an error "Failed to connect to the Windows Event Service" or something like it in a control bar bubble popup.

  I studied the Knowledge Base, and he said to apply the patch to KB2590550.

  Since then, the question is still common and works (sometimes) when I reset the password for the standard user.  In addition, all updates of the operating system, patches, etc. have failed since then.

  Now, I get occasional blue screens immediately as windows starts to load (just after the initial windows graphics) which triggers a reboot.

  Service Pack 1 is installed.

  Help, please!

  Hello

  Thank you for the update on the issue.

  If the problem still persists I suggest to run the SFC scan to check the integrity of the system and see what it finds.

   

  The sfc/scannow (System File Checker) command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  We can check & repair missing and corrupt files by the following article in the Microsoft Knowledge Base.

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:

  sfc/scannow

  
  

  For more information, refer to this link:

  http://support.Microsoft.com/kb/929833/en-us

  Get back to us with the result of the analysis so that we can offer you additional troubleshooting steps.

  Kind regards.

• connection problem with windows 8

  Hello.

  I have a toshiba with windows 8. It was working fine.

  This morning it does allow me to connect to my window more. I have not change my password and use the same password. It does not say any error. It just goes back to my previous screen before the login screen.

  Please notify

  Hi Liam,

  You try to connect by using a local account or a Microsoft account?

  If you encounter a problem connecting to your Microsoft account, you can follow the steps in the Microsoft KB article:

  Forgotten password or other login problems

  http://Windows.Microsoft.com/en-CA/Windows-Live/sign-in-cant

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Connection problem with Windows Live

  Recently, a change has been introduced whereby it asked me to confirm my mobile number so that MS can send me a verification code that fits into a security process probably intended to check my Windows Live Sign On, however, it happens that it is not possible to select a mobile phone in my country (Malta, European Union).

  I would also like to point out that even though I select Remember me, remember my password within logon, Windows Live Messenger still brings me my username and password for my Windows Live ID account (* address email is removed from the privacy *); This is why does not remember my login credentials.  This happens on my laptop running Win XP SP3.
  
  I also noticed that I am getting a problem of logon failure, when I try to login to my HP iPAQ which runs on Windows Mobile 2003.
  Hi Emil_d76,
   
  I recommend you post your query in Windows Live Messenger Forums for assistance with this issue.
   
  For the problem with Windows Mobile, post your query in Windows Phone Forums.

• How to connect wireless bluetooth nokia bh 503 headset to compaq presario cq42?

  Hi, I use a laptop Compaq Presario CQ42.

  Im hoping to connect my headset Nokia BH503 wireless to my laptop Compaq Presario CQ42?

  My configurations areCeleron (r) Cpu Dual-Core T3500 2.10 GHz, 32-bit operating system.

  My problem is that the bluetooth in my laptop is not able to find my Nokia bh503 wireless earpiece. I intend to use it to listen to the sound of my computer and use Skype on occasions. I suppose that, just the audio would solve. Could someone please point me in the right way that I tried several times, but my computer doesn't seem to be able to find the device at all.

  Thanks in advance, hope this will be enough information.

  Install the drivers from here and then watch the video below to set up the headset.

• Not able to connect the earpiece/headset Bluetooth for Wndows 7 Enterprise (64-bit)

  I tried to connect a new Bluetooth headset to my laptop Lenovo T420.

  The laptop runs on Windows 7 Enterprise SP1 (64 bit OS).

  The laptop has built-in Bluetooth adapter and I turned on.

  Also, I went ON my helmet and guarded in discovery mode.

  After that, I added the helmet using the button 'Add a device' from the control panel-> devices and printers.

  Windows 7 installed the drivers required and the headset is successfully added.

  Now, I tried to connect to the headset using Bluetooth configuration dialog window.

  I did a right click on the icon of headset to Panel-> devices and printers.

  The right click is not display the option 'control' for the headphones.

  He showed that other options - "Create a shortcut", "Troubleshooting", "Remove the instrument", "Properties".

  So, I won't be able to connect my Bluetooth headset.

  I tried the same helmet on my friend's laptop computer.

  His laptop is running on Windows 7 Home Edition (32 bit OS).

  The connected properly Bluetooth headset and the option 'control' is also available on the right click.

  The 'control' option provided the Bluetooth configuration dialog window where I can use the "connect" button to connect the headset.

  Kindly let me know the resolution of the issue.

  If your computer has built-in Bluetooth features, you can enable or disable the functions by pressing on Fn + F5. If you press Fn + F5, a list of the wireless features is displayed in the window Radio wireless.

  You can enable or disable the Bluetooth features with a single click.

  To use the Bluetooth features, double-click the icon of Bluetooth Favorites on the desktop and follow the instructions on the screen.

  You can use the Wireless Radio switch to disable Bluetooth features. The wireless radio switch is usually located on the front of the machine. If you have trouble with the Bluetooth, make sure that the wireless Radio switch is set to position it.

  Source: http://support.lenovo.com/us/en/documents/ht037001

  What is the number and the model of the Bluetooth headset? Enter the number of brand and model of your Bluetooth device in the search field provided in the link below, to see if there are compatibility problems reported.

  Windows Compatibility Center.

  http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductViewerWithUpdatedFilters?TempOsid=Windows%208.1&Locale=en-us&Architecture=X64&TextSearch=windows%207&Type=Both&CurrentPage=1&TotalPages=133&ShowCriteria=0&Compatibility=Unknown&ProductName=windows%207

• Connected to earpiece/Headset Bluetooth earpiece

  Hello, is it possible to listen to the event when a bluetooth headset is connected?  The headset uses the hands-free profile.

  I tried the BluetoothSerialPort which does not pick up the helmet because it does not support the serial port profile.  I watched the javax. Package of Bluetooth but it doesn't seem to be a listener to connect bluetooth devices, unless I missed something.  I searched through the forum and could not find a solution.

  Any suggestion would be appreciated,

  Thank you

  Follow-up:

  I realized that if I put the audio track of a Bluetooth (AudioPathControl.AUDIO_PATH_BLUETOOTH) player and it returns a MediaException, it means that no bluetooth headset is connected, who works for what I need.

• ZBook 15 G2: Earpiece/headset Bluetooth does not connect

  I have a bluetooth Sony MDR-10RBT headphones, who used to work with my laptop HP ZBook 15 G2. I don't know what happened, but it no longer works.

  Can I pair the headset, and it appears in the printers and devices window.

  However, when I double click on the headset icon and get the window where I can click on listen to music or VoIP calls forward to hands-free, they are both greyed out.

  If I look in the services:

  Bluetooth support Service: not started, automatic

  Bluetooth OBEX service: not started, automatic

  : Supported Bluetooth started, manual repair

  If I try to start Bluetooth Media Service, I get an error 1053.

  I updated the driver for Bluetooth Intel for the WLAN 7260/3610 (American International) to 17.1.1504.518 Rev.A
  June 29, 2015. I don't know what that replaces, because when I look in device, under the Intel Wireless Bluetooth 4.0 card Manager, it still says 17.0.1401.422.

  Any suggestions where to look next would be appreciated.

  stringy76,

  I found this remark about Intel. Apparently, there are two Microsoft Updates that break Bluetooth on Intel.

  https://communities.Intel.com/thread/104851

  If you follow these steps, you should be able to reinstall these updates and your headphones working again.

• JLab GO earpiece/headset Bluetooth connected but not available for audio playback

  I have connected the Bluetooth device and you can see the two Bluetooth devices as well as devices and printers.  But when I go into Control Panel and sound is not an option for playback or recording.  I uninstalled the device and repaired.  I also entered in the properties of the device and the Services tab and activated flow hands-free calling, Audio, headphones and remote control.  The device works fine on my 2 Surface Pro and my LG Android G2 phone. Any ideas would be greatly appreciated.

  Hello Pierre,.

  Thanks again for the response.

  I suggest you try using the steps described in this article and check.
  Reference:
  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device
  http://support.Microsoft.com/kb/2654568

  I hope this information helps.

  Thank you