How to control the mapping of workflow?

Similar Questions

• Satellite M100 with Debian - how to control the power and the cooling fan on

  Hey,.

  I M100 and I installed debian, works very well, but there is a problem.
  Cooling fan turns on the top speed of all time. I m not shy on unix.
  How can I control cooling fan?
  How to control the power to the laptop?

  Hi mate,

  have you ever heard of the toshutils? I highly recommend trying these tools. Just google for toshutils and you'll find a few nice applications. Should usually be included in the distribution you have, also, I would check with 'apt - get search toshutils.

  See you soon

• How to control the speed of the fan on Satellite A660 - 11 M?

  Please any body know how to control the fan speed its always of 69% and making bad noise and the cpu use is 3% no to treatment high I try avancΘs power but still runing high speed

  Advanced power settings go to Toshiba power Saver saver > cooling method. There are minimum level. Change back to your power management for a second power plan, and the fan must be much quieter.

  I did it on my Satellite A660.
  Before changing PC Toshiba, health monitor showed CPU temperature 41% and the speed of the fan was 67%. After changing the method of cooling fan speed is 0%.

• How to control the output voltage?

  Good time after some time can get the output voltage, but this value is alwayscontinuous. How to control the voltage output through a Boolean? In

  in order to get this tension when I want to.

  Greetings.
  Hugo Santos

  Hi Hugo,.

  If you use a LabVIEW project, you must set the time of sampling in the properties of the node (see SamplingInterval.png). But this time to refresh the data should be high enough. If you take into account this update of time trying to control your way out.

  Kind regards

• How to control the ws appeal period

  Hi Experts,

  I use bpm12.1.3, when the process web service using the service task, how to control the delay?

  Best regards

  Hi user,

  There is a nice blog on wait times. It's about 11g, but it also applies to 12 c.

  https://technology.AMIS.nl/2011/11/18/timeouts-in-Oracle-SOA-Suite-11g/

  Antonis

• Y at - it a paper on how to use the map data the lookup value?

  I'm looking for a documentation where I could find information about the game of card data and how to use the map data configured according to look.

  Any help is very appreciated.

  I found a few threads on data cards:

  http://topliners.Eloqua.com/docs/doc-2434

  http://topliners.Eloqua.com/docs/doc-2817

  http://topliners.Eloqua.com/message/14058#14058

  Maybe that can help you get started

• How to control the movement of the oam in muse & just play once the proposal?

  How to control the movement of the oam in muse & just play once the proposal?

  This must be configured during the creation of the oam, no Muse, but the animated application you use.

  Thank you

  Sanjit

• How to control the length of the field... ?

  Hi all
  
  
  All by providing payment details in the payment.jsp... If we use a credit card which has 16 digits then, how to control the ground to allow the entry of 16 digits only... ?
  
  
  Thank you
  Vishnu

  Write javascript to enter only numbers and set the "16" size = attribute to limit the size to 16 digits.

  JavaScript can be like that of google.

  function isNumberKey (evt) {}
  charCode var = (evt.which)? evt.which: event.keyCode
  If (charCode > 31 & (character code < 48="" ||="" charcode=""> 57))
  Returns false;

  Returns true;
  }

  -Kiss

• How to control the length of field, select items list to 4.2 page

  I apologize in advance if I ask what is obvious, but simply, I couldn't get a response yet:
  
  I would like to know how to control the length of the elements of the type selection list page 4.2
  (as for a normal textfield: in the case where the content is longer than simply not all appears on the screen)
  
  help much appreciated
  see you soon
  Wim

  WimDeGroot wrote:
  I apologize in advance if I ask what is obvious, but simply, I couldn't get a response yet:

  I would like to know how to control the length of the elements of the type selection list page 4.2
  (as for a normal textfield: in the case where the content is longer than simply not all appears on the screen)

  Normally the browser automatically resizes the selection list based on the content.

  What version of the browser / do you use?

  What theme?

  What model page/region?

  What form/article layout?

  What content does not match?

  (Basically the best way to get help with problems of this type is to reproduce on apex.oracle.com and see us actually...)

• How to control the service console in ESX?

  How to control the service console in ESX?

  http://www.Petri.co.il/5-critical-VMware-ESX-CLI-network-commands.htm

  http://download3.VMware.com/VMworld/2006/mdc9694.PDF

  http://download3.VMware.com/VMworld/2006/mdc9807.PDF

  http://download3.VMware.com/VMworld/2006/tac0028.PDF

  http://download3.VMware.com/VMworld/2006/tac9689-b.PDF

  http://download3.VMware.com/VMworld/2006/labs2006/VMworld.06.Lab04-performance-manual.PDF

  http://www.RTFM-ed.co.UK/

  PS: If you have found useful messages then please leave a few points

  André

• How to control the number of fields in the Advanced mode in &lt; af:query &gt;

  Hello
  
  How to control the number of fields in the Advanced mode in < af:query >?
  
  Say I have 20 fields in my table, and I created a view of criteria with 2 fields. This would work perfectly in basic mode. But in Advanced mode , the choice of fields is possible by clicking on the Add fields button. I didn't have the customer to search with all 20 fields. Only 10 fields must be listed in the Advanced Mode, even if there are 20 fields in my table.
  
  How can I control the list of fields in ADDFields button?
  
  Any ideas?
  
  
  
  KR

  You can uncheck the contestable ownership of attributes that you must not appear in the Advanced Mode (but they will not appear in the other modes too!) or by programming the value the same as those mentioned here.

  http://adfcodebits.blogspot.com/2010/11/bit-27-setting-view-object-attributes.html

  Also, you can hide the button AddFields as suggested here - http://www.notjustjava.com/2011/12/cool-tips-to-showhide-components-of-the-query-control-of-adf/

• How to control the sort during the download or export

  can't figure out how to control the sort order when you export on hard drive or upload to smugmug.  have photos arranged in the way I want to do in LR and then when I export to hard drive they are ordered by file name.

  When it comes to your hard drive, your operating system determines the file order.  No matter what you do in Lightroom, the OS will be based on your choice determin how files will be ordered. If you want them to be in order, you should probably adopt a convention of name change in your export that names the exported files similarly followed by a sequence number.  File01, folder 02, etc. Then set your viewer (Finder/Explorer) to sort by file name in ascending order.

• How to control the number of lines of text below the image in the slideshow module?

  Lightroom 3.3

  How to control the number of lines of text below the image in the slideshow module?  I have an image with 36 words in the caption field which exports like two lines GOOD.!  I have another image with 57 words in the field of legend who runs the page and shows only a VERY BAD line.  With 57 words I can't do the single-line text box small enough to keep the text does not spread out of the page.

  Ideas?

  On the Mac platform and I expect similar under Windows, just hit enter or return key will not help. Instead, you will have to hit the keys Ctrl + Enter or Ctrl + return. This forces a new line. Windows may use a different modifier key. The screenshot below shows that it is possible. Unfortunately, you need to add the text via the caption or Description field in the library module.

  

• How to stop the maps zoom before or back on the paging upwards or downwards?

  On Macbooks, the trackpad causes some windows of page zoom (slide up) or zoom out (by dragging down). Usually, this happens with windows that show cards, but other windows, too. This doesn't cause me any irritation, the end since it happens several times a day. I drag it to the bottom of a web page, completely unsuspecting and, in doing so, I slip on a window which completely zoomed out, making it impossible to see what was there. In the case of a map window, this moves the center point of the map to a preset, far from where it starts. To adjust the new focus TI where I needed.

  There is no need to have this function trackpad, since almost all the cards on the web comes with a built in zoom sufficient control. So I would like to disable this feature special trackpad. But I have not found a way to do this.

  Anyone know how? (Assuming that it is possible to turn it off.) Otherwise, I think that Apple should reprogram its trackpad. I don't want to zoom function included.)

  You should be able to disable this feature in the preferences system paved. Should be a checkbox under two fingers to zoom in the screen.

• How to stop the mapping files from database BDB?

  We have a problem where physical memory on Windows (NT Kernel 6 and more, e.g., Windows 7, 2008R2, etc.) gets maxed out after a while when our application running.  On a 8 GB machine, if you look at our process of loading of BDB, is only about 1 GB. But when you look at using RAMMAP memory, you can see that the BDB database files (files not shared region) are mapped into memory, and it is the place most of the memory consumption.  I don't normally care like mapping memory can have performance benefits and ease of use. But the results are provided by the system to an abrupt stop.   This happens when we are inserting results in high order, e.g. 10s of millions of records in a short period of time.

  I would attach a photo in this post, but for some reason the insert image is grayed out.

  Open environmental indicators: DB_CREATE | DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_TXN | DB_INIT_MPOOL | DB_THREAD | DB_LOCKDOWN | DB_RECOVER

  Flags the database open: DB_CREATE | DB_AUTO_COMMIT

  An update for the community

  Cause

  We opened a request for assistance (SR) to work with Oracle on the matter. The conclusion that we arrived that was the main reason for the Windows System Cachememory consumption.  (For reference, see http://support.microsoft.com/kb/976618) When opening files in buffer mode, the equivalent call CreateFile without specify FILE_FLAG_NO_BUFFERING, all i/o to a file through the Windows System Cache.  More database file, more memory is used to support.  This is not the same as memory mapped files, which Berkeley will use for the files of the region (i.e. the environment.) Also use the memory, but because they are limited in size, will not cause a problem (for example need a larger environment, just add more memory).  The obvious reason to use the cache is significant workload for optimizations of performance, especially in reading.

  The downside, however, is that when there is an significant amount of e/s in a short period of time, this cache can get really full and can translate into physical memory being close to 100% used.  This has a negative impact on the entire system.

  Time is important because Windows needs time for active pages transition to pages pending that decreases the amount of physical memory.   What we have found, is that when our database has been installed on the FLASH drive, we could generate a lot more I/O and our tests might work in no time, but memory would get close to 100%. If we missed these same tests to drive slower, while the result was the same, i.e. inserted 10 million in data files, time takes a lot of time and memory usage does not approach even close to 100%. Note that we also see consumption memory occur when we use the hotbackup in the BDB library. The reason is obvious: in a short span of time, we read the entire file of BDB database that makes Windows use the system for her cache. Total amount of memory could be a factor as well. A system with 16 GB of memory, even with a FLASH drive, we had a hard time to reproduce the problem where climbs the memory.

  There is no Windows API that allows an application to control how system cache is reserved or usable or maximum for an individual file.  As a result, BDB has very well control refined this behavior on a basis of individual files.  BDB can only enable or disable buffering in total for a given file.

  Workaround

  At Berkeley, you can disable layouts buffer IO in Windows by specifying the DB_DIRECT_DB flag for the environment.  It is the equivalent of calling CreateFile with specifying FILE_FLAG_NO_BUFFERING.  All I/O is going straight to the disk instead of memory and all the I/O must be aligned to a multiple of the sector size of the underlying disk. (NTFS sector size is usually 512 or 4096 bytes and BDB normal page sizes are usually multiples of that, so for most, this should not be a matter of concern, but know that Berkeley will test this page size to ensure that it is compatible and if not it will disable silently DB_DIRECT_DB.)  What we found in our tests is that using the flag DB_DIRECT_DB had too much negative impact on performance with something else to FLASH disk and therefore cannot use it. We consider acceptable for FLASH environments where we generate significant I/O in short time.   We could not reproduce the memory effect when the database is hosted on a drive of SAN running 15K SAS, which is more typical and so close the SR.

  However, Windows has an API that control the amount large total system of the cache system to use space and we can experiment with this setting. Please see this http://support.microsoft.com/kb/976618 we will also experiment with the help of multiple database partitions so that Berkeley distributes the load to these other files possibly giving the delay of the system cache to move active pages in standby mode.