How to correct this "this link is not active"?, I did elimate the link and press it again, but seems the same: "this link is not active" when I tried to send a link to a file or a folder... Thanks for help...

Similar Questions

• CoreFoundation.ddl was not found. Why is there no place on Microsoft sites that specifically tells a user how to correct this registry.

  Why a windows user has to pay a third party to correct this problem?  Responses to this problem should be easily and readily found so that people who have purchased products with Microsoft operating systems can easily solve the problems themselves.  Where is the answer I need on how to correct this error without having to pay someone.  It seems to me, you have already paid the system once, you shouldn't have to pay a second time to solve a problem with her.  It's very frustrating trying to find the help you need without turning around and around the company who wants to take your money to fix.  Microsoft needs to tell me how to solve this problem.   PLEASE, I BEG YOU.

  First of all, it was an honest typo, I was not looking for the wrong thing.  I have big problems getting Quick Time to work on my computer.  I have re - down loaded, download Itunes, downloaded the package combined download of two of them.  Nothing will work.  Here is a list of all the error messages I received in the last two days:

  Quick Time #0 error, please make sure that QuickTime is properly installed on this computer
  The plug is not properly initialzie
  I tunes of assistance was not installed correctly.  Please reinstall Itunes Helper.  Error 7
  Errors occurred during the installation of the updates.  If the problem persists, choose Tools, only download and try to install it manually.
  And finally...
  Application has failed to start because CFNetowrk.dll was not found.  Reinstalling the application may fix.

  So, I register QuickTime, iTunes and Windows problems.  So where can I find a way to correct my mistake of registry which cost no money and has download their parties _ who pay you and it still does not work.

  I don't know if it will work, but it has helped other people who have problems with installation of these products.  Save the download to your desktop.  Right click on the Setup icon, and then click Run as administrator.  I know that you are probably already connected as long as administrator but believe it is sometimes the case for some reason that I don't understand.

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  There may be a problem with another Apple program interfere with installation of itunes (specifically the itunes help). http://discussions.apple.com/thread.jspa?threadID=2256415.  Here's the gist of it:

  Uninstall the Application Support from Apple, iTunes and Quicktimes (if these, two are displayed as installed).

  (From this moment until reinstall us Application Support, Apple, QuickTime nor Safari 4.0.4 will able to run.)

  Then, we'll remove all the leftover program files and folders.

  (1) open the "disk" Local (c) or according to drive it your program files are stored on.
  (2) open the "Program files".
  (3) with the right button on the iTunes folder (if it still exists), then select 'delete '.
  (4) return to 'disc' Local (c) or according to drive it your program files are stored on.
  (5) open the folder "Program Files (x 86)".
  (6) with the right button on the iTunes folder (if it still exists), then select 'delete '.
  (7) staying in "Program Files (x 86)", open the "Common files" folder.
  (8) open the folder "Apple."
  (9) with the right button on the Apple's Application Support folder (if it still exists), then select 'delete '.

  Now, empty your Recycle Bin and reboot the PC.

  Reinstall Phase

  After restarting the PC, do not open other applications. Disconnect from your network or the internet. Turn off all your security (firewall, antivirus and anti-spyware) software.

  Now start the installation in a right-click on the iTunesSetup.exe file and you downloaded earlier and then clicking Run as administrator.

  Re-enable all security software before you reconnect to your network or the internet.

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  For the iTunes is not install properly and to do please ensure that QuickTime is installed correctly on this computer errors, try to repair your .NET Framework 3.5 SP! application by going to start / Control Panel / programs and features / .NET Framework 3.5 SP! Click on the program and click on repair or uninstall.  When you are prompted, click Repair and let it run.  You won't have to restart.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  The FPR application failed to start because CFNetowrk.dll was not found.  Reinstalling the application may fix.  Make sure you have all updetes installed Windows - and I mean all of them (except for device drivers).  Do a manual check and install whatever it is, it comes with and then do another manual check and do the same thing and this follow up until no new update is presented and confirms that you are using the SP2 for Vista (Start / computer / system properties and it should say SP2).  Otherwise, manually install SP2 and rerun through the exercise of updates (or check it out before you start making updates).

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  For the plug-in has not initialized properly, make sure that you use version 7.4.1.14 QuickTimes or most recent - there is a known issue with older versions of work with Vista, but they claim to have the answers with this version.  If you've tried for awhile, you will have an older version.  I download and save on the latest desktop and make sure it is as stated above.  I also re - download and save on the desktop iTunes very it in case theres a similar problem there.

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  To install updates, choose Tools, only download and try to install it manually (it's what they recommend as the fix for the problem of updates, so we should take the word for it).

  Once you've done all the preparatory steps before the downloads, repair. NEt Framework 3.5, uninstall programs, you must uninstall (if you can, or as much as you can according to the instructions) and then reboot the machine to make sure that you leave cool.  After the downloads, but before the installation, turn off all your security software and antivirus software in the case where there is a conflict of something.  Make sure that no other programs are open.  Then follow the steps in the update, then the measures re - install.  Then restart.

  I hope that the two products work now.  I don't think we need to do something for your registry database - weather (it's all these other programs that are the problem).

  If this does not help, then please repost this question in music and its Forum: http://social.answers.microsoft.com/Forums/en-US/vistamedia/threads as well as a link to this topic (so they'll know what's already been tried).  They are the real experts on audio problems and will be more than happy to help you - or you can try the Quicktimes/iTunes Forum where they know the products better.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I see "a link to a file" given in adobe acrobat pro on the mouseover?

  How can I see "a link to a file" given in adobe acrobat pro on the mouseover?

  It's because it's actually a link that points to a local file (using the file:/// syntax). If you change the action associated with this link, you will see that it is a command "open a web link", not a command "open a file". The latter does not display this information, that I know.

• I can sign into my hotmail, but I can't open or delete emails. Please advise on how to correct this problem.

  I can sign into my hotmail, but I can't open or delete emails.  Please advise on how to correct this problem.

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Thanks for help? I have Adobe Pro DC and how can I convert RTF to PDF, please?

  Thanks for help? I have Adobe Pro DC and how can I convert RTF to PDF, please?

  Hi kayo65585200,

  RTF is a supported file format (formats of files supported|) Acrobat, Reader) for PDF conversion, refer to this link for help Acrobat help. Convert or export PDF files to other formats of file.

  Kind regards
  Nicos

• I have an ifone6 that is not recognized by iTunes. It has a newer version of iTunes, but when I check the updates, it says I have the latest version. Thinking that it is a matter of Win XP. Thanks for help.

  I have an ifone6 that is not recognized by iTunes. It has a newer version of iTunes, but when I check the updates, it says I have the latest version. Thinking that it is a matter of Win XP. Thanks for help.

  You can run the latest version of iTunes for your version of Windows, but you are not running the latest version of iTunes is available and it's iTunes 12.3. You must run Windows 7 at least. I'm not a Windows user, but I think 7 is newer than XP.

  Check this.

  http://www.Apple.com/iPhone-6/specs/

• I want to use makeup but Lightroom CC doesn't have the old menu dropdown to select. When I tried to click on "Reset of the Lightroom settings" to restore the old presets, it did not work. Help!

  I want to use makeup but Lightroom CC doesn't have the old menu dropdown to select. When I tried to click on "Reset of the Lightroom settings" to restore the old presets, it did not work. Help!

  You must click on the Option where it says 'Black' and then you will be able to select soften the skin.

• How to find destinations hypertext links to other files

  Hello Scriptmakers

  I want to find hyperlinks in a document with destinations of another InDesin file.

  I want to find this hyperlinks by a JavaScript,

  I tried this

  if (app.documents.length > 0) {
      main();
  }
  
  function main()
  {
    var doc = app.activeDocument;
    var anchors = doc.hyperlinks;
     
    //for (var n = 0; n < anchors.length; n++)
    //{   
      anchors[0].showSource();  // This works fine.
      anchors[0].showDestination(); // This goes to the right page but in the wrong file.
   
    // The following works, but this is not what I need.
      alert(anchors[0].destination.name);      
      alert(anchors[0].destination.destinationText.parentTextFrames[0].parentPage.name);
      alert(anchors[0].destination.constructor.name);
      
     
    //}
  
  }
  
  

  Miss me something like this:

  ...destination.parentFile.name
  

  Who can help?

  Thank you to

  InDesignerix

  Hello

  I'd look for destination.parent .

  Be the destination could be a:

  ParagraphDestination
  HyperlinkURLDestination
  HyperlinkTextDestination

  HyperlinkPageDestination

  HyperlinkExternalPageDestination

  and the parent is always a document object.

  Then he must unravel, whether or not it is your active document.

  Search for document.fullName in the documentation of DOM and Hyperlink.destination DOM documentation.

  To compare I would use File(Hyperlink.destination.parent.fullName) .fullName and do a comparison of strings , because document.fullName is a file object and I don't think you can compare a file object to another file object directly. Maybe I would also check if the File.isValid. Could well be, he hasn't.

  Sorry, no time to write and test some don't code for this right now.

  Some links to the documentation for DOM:

  Adobe InDesign CS6 (8,0) object model JS: file

  Adobe InDesign CS6 (8,0) object model JS: Document

  Adobe InDesign CS6 (8,0) object model JS: hyperlink

  Adobe InDesign CS6 (8,0) object model JS: ParagraphDestination

  Uwe

• my friend downloaded and installed the sp1 for vista, but since then, he gets a (error797) error message when it tries to connect to the internet, are there patches for this?, thanks

  It uses a dongle mobile broadband with 3 for the internet, it is telling him that there is no network available, have tried to delete the connection and reinstalling the software, with no results, control of Device Manager, I noticed there is a yellow triangle against the network adapter?, opened the properties for him and he said he did not work properly because the drivers were not installed, but when I tried to search for them in windows coudnt find?, any help appreciated, thanks.

  Hi thanks for the info, but he wasn't after all, network card when sp1 was installed, it has changed or blocked software for the mobile b/band, for someone who has the same problem, here is what you need to do.

  1, got to control panel,

  2, select programs and features.

  3, uninstall ALL! entries to do with the mobile b/band, even the software for the dongle itself,

  4, restart pc or laptop, plug in dongle and reinstall the software as if it were the first installation.

  This information came from an agent of technical support 3 and worked a treat, no problems,

  This procedure should work for all providers of mobile b/band

  hope this helps :))

• How to set up two different sites with a section that has the same content?

  I have two sister sites, each a separate but related Department in a hospital. Each of these Web sites, I have a main tab called library, which has about 30 pages it contains for related health issues. The library is the exact same content on each site, but the main navigation and the header of the site is obviously different. I have been maintaining this same content on both sites (if something is changed, then I must do it twice). It is not effective, and I would like to find a way to combine them somehow. I don't have a ton of experience, but I catch pretty quickly and I basically need ideas for the best way to handle this. I considered creating a third-party site, and the Library tab on each of the other sites would take you to this new site. I also wondered if there is a way to integration of duplicate content to two different pages (perhaps with an iframe). In this way I would update the original file, and it would be updated on both sites.

  The sites also have different sizes. It is 960 pixels wide and the other is 690 because it has a sidebar that makes it smaller. How would you recommend all that I manage that? I use Dreamweaver CS6 and my pages are all HTML

  Because the sites are on separate areas, I'm not sure you can use set includes in this situation.

  Iframes would be the way to go. You just save the content iframe on one of your sites and link page to two pages.

• How to open a new window in double? Two windows with the same content.

  Hello, I am switch of IE8 to Firefox. We must be able to open a new window with the same page instead of going to my home page. In IE, it's called "Open A New duplicate Window. This feature is very important for us using two screens for web development. Thank you

  Other posters have a difficult time distinguishing tabs and Windows, it seems. With a lot of posters here the two terms are used incorrectly and indifferently, as is the desktop and the window of Firefox, but my understanding is that a lot of this "bad language" is taught in schools.

  This is the only thing that I could find quickly for you:

  • http://www.Pikey.me.UK/Mozilla/?addon=clone-window
  • Compatibility information Firefox 5/6: http://www.pikey.me.uk/mozilla/

  Comments on the first link (read carefully). May not work, unless this should be 'current tab's addressare'and it seems he can "take back" the new tabs in the window/new selections (i.e., no new windows/tab blank):

  • Clone the address of the active tab and the story in a new window when the new command window is used (and possibly in a new tab when ordering new tab is used). {It is emphasis added}

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox

• How to animate keyframes, which I copied into After Effects to mirror the same movement as another series of keyframes?

  Layer of biker to right leg. Biker body layer.

  You add an expression to the property that you want to order by selecting the property and then by holding down the Alt/Option key. Here are the basics: Adobe - search: the expressions. Learn more by typing key words such as expressions in the field search for help in the upper right corner of the AE.

  If you want keyframes in a single layer to match the keyframes in another, then you can link the properties with a simple expression that is created by dragging the pickwhip to layer property from the slave to copy the master layer that you want to track. This example would bind the rotation of a layer to another rotation. The second expression would offset values and is an example of how you define in your animation cycle to the top of the opposite leg. You just know how many images there are in the cycle. Just go to the last image and read the number of frame. It's easier if you have the calendar set up to read in frames. Change the display time by holding down the Ctrl/Cmnd key by clicking on the time indicator.

  If you want to have the slave shift layer in time, then you add an argument valueAtTime expression as in this example using the rotation property of the main layer:

  r = thisComp.layer("Master").transform.rotation;

  offset = r.valueAtTime (time +. 5)

  This assumes that your cycle of keyframes is 1/2 second.

  If you are more comfortable working with frames in seconds and then you change the expression like this assuming that the number of images in your game to keyframe is 15:

  TF = 15; Number of the frame in the last keyframe in the cycle

  r = thisComp.layer("Master").transform.rotation;

  TTF = tf/(1/thisComp.frameDuration);

  offset = r.valueAtTime (time + ttf)

  Here is an example of pin simple puppet:. Dropbox - Expression leads to foot Cycle CC 12 aep (If your browser adds a .txt extension, simply remove it and you should be able to load the project 2012 CC and later). I arranged the workspace so that it was easy to see what I had done. Given that I've created a loop instead of a ping-pong of the keyframe in the middle of the cycle was used as at the beginning. Have fun...

  

• How to get firefox 4 to allow two separate processes run at the same time.

  I'm used to be able to run two separate processes of firefox and so also run two separate user profiles at the same time as well. But I recently moved to firefox 4 and windows 7 and the other, or these two prevents the old method, I used to work. Basically I was running firefox (via 'run' or via an edited shortcut) with the following executable:
  p - profilename - noremote

  And it would launch a separate process that runs under the profile name. Is it possible to do this with firefox 4 and win7?
  I am a developer (web and desktop applications) and it is highly preferable to do so. One of the reasons is that, if one of the processes one falls, the other is fine. Another is to have separate profiles so that addons with leaks of memory, like firebug, can be run in its own process and I can restart when I have to without affecting other processes. I sometimes also need to set the processor affinity so that a process of firefox is not a big eater.
  Any help would be appreciated.

  The correct format for this command is -no-remote

• How can I make windows media player display on all monitors at the same time?

  Hello world

  I hope that you all had a great Christmas and a happy new year.  I just installed a new graphics card and now have a 3 monitor configuration, everything works fine, however, I would like the visualizations for windows media player on all 3 screens kind of like a video wall.
  Could someone explain to me if this is possible and if so, how do I do?
  Thank you very much.
  Jim
   
  Original title: using WMP on 3 screens

  Hi Jim,.

  Thanks for keeping us posted and share this information with us.

  It is not possible to mirror a specific program.

  Back to us for any issues related to Windows in the future. We will be happy to help you.

  Thank you.

• How to make an initial charge followed a change of replication to the same process of the user (Java adapter) output?

  I need to:

  -Complete an initial load from an Oracle database to a user (process Java of an adapter) output process, with:

  TABLE..., SQLPREDICATE "FROM SNA... » ;

  -Then start a normal change of replication from the SNA for the same output of the user process, for example with:

  Register extract... RCS container (...) database...

  Add extract..., tranlog integrated, Yvert...

  I also need to have a clear dividing line between the end of the initial charge and the beginning of replication of change.

  That is, I need to know when the initial charge ended replication in the output of the user.

  I can do the initial charge and the work of replication of change, but I can't figure out how to do the two processes feed at the same exit of user procedure.

  It is because of the initial charge producing "extract files", compared to the extract of change generating the "path of the files', and those who cannot be loaded by the same process of output to the user.

  I don't understand why there is such a distinction and limitation.

  Is there a way to extract initial loading of writing to a log file, which could be picked up by the extract of change?

  If I could turn the extract files into files of trail, that would solve most of my problems.

  I believe that those who have exactly the same file formats (as is from logdump), and the only difference is that tracks have an additional checkpoint file. My understanding is correct?

  Is there a hack that would allow me to turn extract files in a path?

  Thanks in advance for any idea,

  --

  Romain Lenglet

  Roman. [email protected]

  1 do the initial load and wait for it to complete. Let's say the initial load generated more trails

  / tmp/ab000000

  / tmp/ab000001

  / tmp/ab000002

  / tmp/ab000003

  2. stop the initial load snippet once its done.

  3. set up an excerpt from capture of change online and mention the same prefix for trail

  EXTTRAIL/tmp/ab

  Now, the important thing is to let the extract online from sequence 4 and we do this with the following command,

  ggsci > Add ext ,...

  ggsci > add exttrail/tmp/ab, seqno 4, ext

  When we add the checkpoint of trail, we ask the extract from the sequence 4

  You can then start out it online and it will send sequence 4.

  4 then add and start an extract from pump to read the sequence 0 trail and run with PASSTHROUGH

  Thank you

  REDA