How to create a conical gradient?

Similar Questions

• How to create a uniform gradient w / Soft Edge & filter

  

  Hello, Im using photoshop 6 and Im trying to apply an effect to a photo of the banner, which will be compatible for more pictures of the banner of the same size.

  I have attached a picture of this.

  
  As you can see the gradient (which contains the text) starts with a gray and then white. The right edge that meets the blue sky is not a hard edge but rather a soft edge.

  
  I'm not sure how to create that soft edge. Someone else had mentioned to use the gradient with colors of gray to white then to transparent to create this right edge soft.  I'm not sure how to implement that.

  I used a brush in this case, and as you can see, the line is uneven.

  
  Also, I think that the filter used here is ripple or Ocean Ripple.

  I was hoping if someone could guide me through what would be the correct steps to create this effect, so that I can use systematically for several photos

  Oh, I see, 6 PS. The pieces here on the layers of filling and the Layer Styles does not apply, but mounting method is the same:

  ---------------------------------------------------

  First, open the gradient editor by clicking on the gradient in the toolbar of the dialog for a gradient fill layer or options:

  

  Set up a gradient of gray and white, then add a transparent stop just not the white judgment:

  

  Enter a name and click "New" to save him. You can also save as part of a layer with Gradient Overlay Style.

• How to create a pattern gradient in Illustrator

  I don't know the best way to describe what it is, so I'm the appellant a "gradient pattern. Basically, I'm trying to figure out how to make a gradient like the one in the photo, where the forms are located in the upper part and disperse evenly down. Any advice on this is appreciated, thanks!

  It does not really resemble a traditional mask opacity job for me because there is no actual all bland, its more to do with the gradual change of size and spacing of the forms in the model. an opacity mask would be a great way to face fading from 100% to 0% in the tone of a model, but it could probably be done with future adjustments easier to 'fill' just a model with a shade of color gradient?

  There was some discussion recently that resembled halftone patterns and a guy showed how to use different (other than the default points) forms under the mixed model that would achieve the result of half of this design superior. you will have to look a few threads of halftone pattern to identify it.

  as a simple manual option you could just draw the shape on top, then scale and adjust one down and use a form to make a "column of the model, then repeat it across the page.

  the lower part dotty looks more like a traditional model of halftone, Phantasm plugin allows great control of things like that, or you can just play with a radial gradient black and white as a fill of a circle and use the model of half-tone effect to create the points.

• How to create a circular gradient progress bar

  In Illustrator, I'm truying to create a round progress bar. You may know that the loading windiws7 slider, or the circle loading in FireFox. (It looks like a circle with no fill, only a line of fat - a bit like a doughnut. I want border line to be a gradual gradient at the end - see attached picture below, it is the upper right). Things I only get done sofar me a half a circle/gradient, just like the image below. What I want is a gradient that will completely round. What I did is the following: create a small circle, no fill, just a big edge. Expand it and give it a gradient.

  I imagined an another way to get what I want, only problem is that I don't know if this can be done in Illustrator: can you create a rectangle with a gradient, and 'bend' or leave it to 'follow' along a path of circle? Just like text can give a path?

  Or am I think far and is there another way to accomplisch this? Sure hope so.

  Oh by the way, I only intend to use this photo in a photo Station slider. So there is no need to load percentages, as your regular rectangle can do bar.

  Thank you!

  

  Illustrator does not provide what is sometimes referred to as a "radar" or "conical" sweep degraded. Its gradients are limited to the most basic linear and radial. Recent versions of Illustrator also provide an objects gradient mesh, but it's pretty heavy for such a commonplace treatment.

  This question has been answered and described several times in this forum. Illustrator solutions are to use mixtures (and, if you have the brushes from these mixtures.) Search the Forum and you will find them.

  JET

• How to create of new gradients/gradient use

  Hi all

  I'm having a lot of trouble with gradients. I can't create new gradients and usually if I managed to get a box colored when I move to a second object with a gradient, I can't import a new color in the gradient swatch. When I pull the top of the new window shade gradient, all the colored boxes are grayed out: it is not quite the choice (see below) so I can't create any new color except what exists already IE white in black at the bottom of the window. Help, please!

  

  See the gradient ramp

  Click on one of the proxies of swatch - white or black at the end. Does anything happen?

• How to create a transparent gradient?

  I use Photoshop Elements 8.  This could have a very simple answer, but I can't understand it.  I'm trying to take a layer and simply get a solid image to a transparent gradient, while it disappears gradually.  It's hard to explain, but I hope you understand.  Please let me know if you know how to do this.  Thanks to a bouquet.

  -TitanVex

  It would look somewhat like this:

  IIIIIIIIII IIII II I I I I

  IIIIIIIIII IIII II I I I I

  IIIIIIIIII IIII II I I I I

  ^                                      ^

  Solid picture

  Part of gradually

  Picture disappears

  If that makes sense.

  Is that what you are looking for?  I used the method of Group of clipping that mentioned Terri.

  1 added an empty layer below the photo layer and grouped the 2 layers.

  2 set the gradient options: linear, to the first plan of Transparent

  3. calls on the gradient of approximately 1/4 from the edge left completely to the right edge.

  You can continue to draw the gradient with different staart and endpoints until you get the desired result. Just a matter of trial and error.

  I added the white layer so that you can see the results.

  

• How to create a gradient of irregular

  I know how to create square, circular and radial gradients, but sometimes I need the gradient to a more asymmetric or irregular shape of, say, a cloud, a star, a dog or a bottle. What are some good ways to do this?

  Thank you.

  Place a filled area of your gradient desired on a transparent layer in the opposite case and add a stroke layer style. The Type of gradient fill value and Style to the bursting of the form. Adjust the size to give the desired effect.

  Note that the effect depends on the width of the image; the narrow parts only get one end of the gradient, and the environment might not get anything at all, so you can reduce the opacity of the layer (NOT the layer opacity) filling, or add a color overlay or a decorative motif for the layer Style.

  

• How can I create a background gradient which does not affect the readability of the words in the foreground?

  

  Note that the words seem to disappear as the blue becomes more important?

  How can I fix it?

  In addition, since I work more than 30 plans, is there a general framework that needs to be changed?

  Furthermore, this gradient was created using the gradient tool, and is therefore not part of the background.

  Under file-> Document Setup, I found that you can create a background Uni but see no options for a gradient fill.

  I would appreciate help.

  I'm like your gradient is above the text.

  Select your gradient and the hit Shift + Ctrl + [ ]

  This should send your gradient to the back behind the text

• How to create the gradient transparency

  Hello
  Please share how to create gradient transparency
  joined the example

  qanibh,

  In the new version (s), you can specify the values of opacity for the gradient fill.

  In older versions, you can:

  (1) create the shape with the color of fine solid on the background one.

  (2) copy forward, apply a gradient to the copy, and in the transparency palette/Panel flyout to make mask opacity, adjustment Clip and invert as desired.

• How to create the ellipse path gradient to PDF using object code

  Hello

  Someone tell me how to create PathGradient ellipse in pdf.i found the way to shadow Rectangle in pathgradient, but the ellipse can't shadow as pathgradient, if you know tell me please,

  Kind regards

  Sasi kumar S.

  Please refer to How to create LInearGradient in pdf format for why this isn't the right forum. Thank you.

• How to create a gradient of the race in this way

  Hi all

  I'm looking to create a contour gradient as it is a color gradient that runsaround the race rather than through it?

  Thank you

  Hi real goat.

  If you are on AICS6 or above, you can try Gradient features Panel gradient color option.

  

  You can see more about it on this tutorial.

  http://www.adobepress.com/articles/article.asp?p=1855821

  Kind regards

  Dhirendra

• How to create the Rotary effect?

  Hello. I can't understand how to create something like what's shown in the picture as an attachment. I am trying to create a similar look with the letter 'B '. I tried to use the gradient tool (which only turns and does not keep the shape), and I had no luck with the 3d tool. I don't know the perspective tool can be used but don't know how. Can you get it someone please let me know how this can be done. Thank you.

  

  Create a view by 1 point.

  List your item on the perspective plane.

  Press Alt + 5 and then move it to the right.

  Press Cmd + D (Win: Ctrl + D) to repeat

• How to create and animate a viscous black oil?

  Hello!

  
  Can I ask you a question?

  I want to create a viscous, oily liquid and that animate it so it "wobbles".

  But I don't even have an idea how to create the chart.

  I have attached a picture. Here you can see how the liquid should look like.

  (In the background. Red dots and other stuff important deosn)

  It would be so great and very useful if someone have an idea and would share.

  Thank you for the advice,

  best,

  Peter

  

  If you talk about the background, I would like to start by creating a shape with two fillings layer degraded at right angles to each other. The upper gradient would be defined to multiply if you end up with something like this:

  

  Then I would start to play with things like Action Ball CC or Mr Mercury to get something like that which moves slowly:

  

  You could then compose before as a layer and add something like CC glass to end up with something like this:

  

  Then you try just to get the look you want. Given enough time you could replicate the appearance of the background very closely. There are a lot of simulation and distortion effects to play with. The trick is to start with something that will give you different colors. Creating a rectangle with a gradient and then duplicate the gradient and play with angles and blending modes can give you a good place to start.

• How to create the rainbow effect in the formulation

  

  I can't understand how to create the same type of effect (completely in the wording) as indicated in the text of the image above. I'm new to Illustrator, and any useful information would be greatly appreciated, thank you.

  STO

  You can:

  (1) in the tool box, set the fill to none;

  (2) in the appearance palette dialog box, click Add new fill;

  (3) with the new fill selected / highlighted in the main window of Apperance palette, apply the gradient.

  In the case shown and similar, you can click the gradient in the Toolbox instead of filling Uni, then change the colors in the palette degraded for each stop end of levels of grey, white and black for the right colors in the color palette (RGB or CMYK), then add stops with intermediate colors. you select / Create to stop clicking in the gradient bar, and you can move the stops in ClickDragging or by setting the percentage values.

  The image looks like a little green at 0%, blue 50%, red 755% and flame red / yellow 100%.

• How to create an image button...

  Tools: Adobe Photoshop CS5

  Master level: very novice

  Goal: Creat Button for a website

  Environment: Windows Vista

  Problem: the following images are buttons was designd. An image is in the normal state, while the other button is in State rollver. I want to create an image of indetical with the same properties for example (size, font type, font size, background color of color police) called "intuitive healer". I don't know how to imitate the fonts and background colors.

  normal status of a button

  button rollover

  Intuitive healer? normal

  Intuitive healer? Rollover

  I'm curious to know how to create a button with the exact "look and feel" design and writing on this healer Inutive

  Make my day

  the guy looks like both a new Roman font.  If you follow the tutorial below, it sets out nicely. you simply omit the gradient and effects that they do in the tutorial, to match the one you want on it. It will associate Dreamweaver and Photoshop.

  Flight path Imaging:

  http://help.Adobe.com/en_US/Photoshop/CS/using/WS18F9E180-3241-4891-ACC8-82C9DFB254F5a.htm l

  Watch this video:

  http://www.YouTube.com/watch?v=_pVfBtW-Tuq

  -good luck!

  Janelle