How to create random variable of XML

Similar Questions

• How to create unique variables for... in loop? (AS2)

  Hello

  I have a function onEnterFrame controlling all the movie clips in a table. The movement of each of these clips is controlled by a few variables - speed, acceleration, etc - that are changed on every enterFrame. I can't understand how to create unique variables for each element of the array. Now my variables are the same for all elements, and therefore the proposals of each video clip are the same.

  I used this code to add my video clips in the table:

  for (i = 0; i < starNumber; i ++) {}
  duplicateMovieClip (star, "star" + I, i);
  starArray.push (this ["star" + String (i)]);
  }

  I do a similar thing to create unique variables for each? Or is there something I need to do my loop (myClip in myArray) which is contained in my onEnterFrame function?

  I can post my code if that would help (65 lines).

  Creating unique variables is easy way out. Here's the modified code using unique variables that should solve your problem:

  var i: Number;

  var starArray:Array = [];

  var starArray_X:Array = [];

  var starArray_Y:Array = [];

  var mc:String;

  var scale: number;

  var speedXMod:Number;

  var speedYMod:Number;

  var starNumber:Number = 10;

  var minSize:Number = 15;

  var maxSize:Number = 80;

  var speed: number = 0.2;

  var minSpeed:Number = 0;

  var maxSpeed:Number = 1;

  for (i = 0; i< starnumber;="">

  duplicateMovieClip (star, "star" + I, i);

  starArray.push (this ["star" + String (i)]);

  }

  (MC starArray) {}

  starArray [mc] ._x = (Math.Random () * Stage.width);

  starArray [mc] ._y = (Math.Random () * Stage.height);

  scale = (minSize + (Math.Random () * (maxSize - minSize)));

  ._xscale starArray [mc] = scale;

  starArray [mc] ._yscale = scale;

  var startSpeedX:Number = ((Math.pow (-1, (Math.round (Math.random ())) * (minSpeed + (Math.Random () * (maxSpeed - minSpeed)));)))

  var startSpeedY:Number = ((Math.pow (-1, (Math.round (Math.random ())) * (minSpeed + (Math.Random () * (maxSpeed - minSpeed)));)))

  [mc] starArray_X = startSpeedX;

  [mc] starArray_Y = startSpeedY;

  onEnterFrame = function() {}

  (MC starArray) {}

  speedXMod = ((Math.random () * acceleration)-(0,5 * accélération));

  speedYMod = ((Math.random () * acceleration)-(0,5 * accélération));

  If (((Math.abs (starArray_X [mc] + speedXMod)) < maxspeed)="" &&="" ((math.abs(stararray_x[mc]="" +="" speedxmod))=""> minSpeed)) {}

  [mc] starArray_X += speedXMod;

  } else {}

  [mc] starArray_X = speedXMod;

  }

  If (((Math.abs (starArray_Y [mc] + speedYMod)) < maxspeed)="" &&="" ((math.abs(stararray_y[mc]+="" speedymod))=""> minSpeed)) {}

  [mc] starArray_Y += speedYMod;

  } else {}

  [mc] starArray_Y = speedYMod;

  }

  If (((starArray [mc]._x + starArray_X[mc]) > 0) & ((starArray [mc]._x + starArray_X[mc])))<>

  starArray [mc] ._x += starArray_X [mc];

  } else {}

  starArray_X [mc] * = - 1;

  starArray [mc] ._x += starArray_X [mc];

  }

  If (((starArray [mc]._y + starArray_Y[mc]) > 0) & ((starArray [mc]._y + starArray_Y[mc])))<>

  starArray [mc] ._y += starArray_Y [mc];

  } else {}

  starArray_Y [mc] * = - 1;

  starArray [mc] ._y += starArray_Y [mc];

  }

  }

  }

  }

• How to create a variable

  Hello;
  
  I need to have a variable created to assign to a group. Is it possible to create a variable for the title of the extension of the word beep? I have the impression of seeing a syntax somewhere before (like variable@incontext:varname...), but could not understand how to create? Can you help me?
  
  Thank you.
  
  Munshar

  Check this forum thread: http://forums.oracle.com/forums/thread.jspa?messageID=9530049�

  See examples of use of variables in the various blogs here: http://blogs.oracle.com/xmlpublisher/templates/templates_rtf/xslxpath/

  Thank you
  Bipuser

• How to create Global Variables in Essbase

  Hi gurus,
  
  In essbase automation, I saw generally the statement below.
  
  Connection $1 identified by $2 $ 3;
  
  and of course many other statements also.
  
  1. now, my question is where and how can we create the variables ($1, $2 and $3).
  2. they are Substitutinal Variables or Environment Variables.
  
  Pls let me know in detail how to create and define the variables above.
  
  
  I tried to create them as variables indirect in environmental assessments, but when you run the maxl order Login $1 $ 2 $3 its saying this $1.. variable cannot find etc.

  They are variable positional parameter and are passed in a maxl script, you can read all about it at:-http://download.oracle.com/docs/cd/E12825_01/epm.111/esb_techref/maxl_syntax_vars.htm#syntax_techref_proj_maxl_ddl_utils_shell_d0e227

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to create a variable in a mapping or process_flow

  I am creating a flow where I spend the audit_id of the mapping of a map as input parameters. How to do that.
  
  I thought create a variable and assign the id verification to this variable and linking this variable mapping that will become the entry for the mapping.
  
  Thank you

  joining this average assign the variable.

• How to create the new Custom XML report without the use of the form builder

  Hello
  
  What are the steps to create the new Custom XML report without using the Report Builder?
  
  Thank you and best regards,
  Aerts

  Aerts,
  Can you clarify your question more away!

  -bifacts
  http://www.obinotes.com

• How to create a variable &lt; sql:setDataSource &gt; database password

  Hello

  I hope someone can enlighten me on that.

  I am trying to create a jsp page that uses JSTL to access the database. Regulations in my company requires me to use the password for the encrypted database.

  Here is an excerpt of my codes. The error I get is the password = "${decryptedPassword}" never work. However, it can print the password correctly from "System.out.println ("password is"+ decryptedPassword);" How can I pass the variable 'decryptedPassword' in the password?

  Thank you very much!

  Steve

  < %
  System.setProperty ("oracle.net.tns_admin", "C: / NEW PC BACKUP/oracle/product/10.2.0/client_1/NETWORK/ADMIN");
  System.setProperty ("oracle.net.tns_admin", "/ usr/local/oracle/10.2.0.3/network/admin");
  String decryptedPassword = "";

  Logger.info ("PLANNER_REPORT_EDOW_PSWD_ENCRYPT_KEY = <" + keyAlias + ">");
  Logger.info ("PLANNER_REPORT_EDOW_PSWD_KEY_STORE = <" + keyStoreFile + ">");

  FStore FileBasedKeyStore = new FileBasedKeyStore ("/ usr/local/scripts/keystorefile/key.dat", null);
  If (fStore == null) System.out.println ("keystore is null");
  Key = fStore.getKey ("cities") (Key);
  If (key == null) System.out.println ("key is null");
  decryptedPassword = new String (CryptoUtil.decryptFromBase64 ("OIC/n5asIP6CDR01WwvXtw is", key));
  System.out.println ("password is" + decryptedPassword);
  % >

  < sql:setDataSource var = 'snapshot' driver = "oracle.jdbc.OracleDriver" url="jdbc:oracle:thin:@cngd" user = "citosapp" password = "${decryptedPassword}" / > "

  A variable in the Java code is not available as magically as a variable JSTL. You will need to add it to the requestScope for example (request.addParameter ()).

  Your confusion is proof enough that it is a very bad idea to put the Java code in your JSP pages. It leads to unreadable code. You should learn how to combine JSPs & servlets to separate the logic of the other Java and JSP code model.

• How to create random file names

  I have a folder containing 600 JPEG files. I want to replace the current file with those randomly generated names. So instead of files names IMG_11.jpg, IMG_12.jpg, IMG_13.jpg, I don't want to see something like 342.jpg, 8.jpg 107.jpg.

  Could someone smart give me a code that would do this. I want to change ONLY the names of files in this folder.

  I need simple instructions and comprehensive on how to run the code, suitable for a young man is no longer in the brain.

  I DON'T want TO change the name of each file by hand. I CERTAINLY DON'T want TO cut-and - paste or other references to Movie Maker or any other manufacturer of trade show.

  Please read each question carefully before answering. I tried to ask before and gotten completely irrelevant responses that make me tired.

  Hi David,

  Thanks for posting the question in the Microsoft Community.

  Unfortunately, you will not be able to run a code to change the names of files in bulk. However, you can try to look for a third-party software that might help.

  Note: using third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

  Thank you.

• How to create the variable diagonal line pattern in CS6?

  Hi guys

  I'm at the edge of madness with the creation of my pattern of diagonal lines. I've tried everything I can think of, but the boss is an absolute mess! I want to create a pattern of diagonal lines, but I want the lines to not be uniform. Basically, I had a group of 3 lines and then a separate line on its own, then repeating this like the image below. I used the function of distributing the distances between the lines is the same everywhere. I then turned the all exactly 45 degrees and aligned with the lines to fit in the bounding box in the mode 'as the motive"as shown. Yet, the resulting model is just a mess of the ugliness of overlap. Can all that I want is the model literally watch as it does in the picture on the left, someone you please tell me how to sucessfully this in CS6? Would be eternally grateful!

  Desired design: result:

  Never create a line pattern obliquely. It is not necessary.

  Create the model at 90 ° angle and then use object > transform > Rotate and check the option "Transform Patterns" and enter the angle you are after...

  

  Try to get the slanted lines to match a pattern can take a lot of effort. Where as with this method you can create the pattern and turn it in a few minutes. Let the Illustrator to work for you rather than against you. And, you can rotate to any angle, so the model will work in many ways.

• Video editing in PS: how to create random noise on each image

  Hello PS community,

  I do a lot of video editing in PS with my DSLR video files, because I like how PS treats the colours etc and I'm used to all the corrections due to image editing. It needs time for the export/rendering, but for me it is worth.

  I'm not really satisfied with the plugins in video editors that simulate the grain, so I thought that I can do better in PS. I created a grain/noise, who expects a lot from me. I created a new layer with noise created with the original PS-noise-plugin and adjust the mode of fusion etc to achieve a look that I like, and it looks great when the movie does not play.

  When the movie/animation plays the film will play under this layer of static noise that is unnatural looking.

  I want to achieve is that the PS will be made the layer of noise for each new image (creating an individual noise for each image layer) so that the film is natural looking.

  Thanks for your help!

  Best regards

  David

  So I suppose you could create an animation of noise and that are superimposed as a smart object, too.

  Depending on how long it is supposed to be to avoind, noticing the repetition just create as many noise-layers in a separate file, use the images made of layers and file > export > rendered video.

  Or you could create greater noise layer and around shuffle manually in the animation timeline.

  But maybe someone else has more insight in this matter.

• How to create unique variables in loops? (AS2)

  Hello

  I wonder if it is possible to create variables in a loop for which uses an incremental number in the name of the variable.

  This is the code I tried (like a long shot) but does not work:

  var i: Number;
  for (i = 1; i < 10; i ++) {}
  var ['number' + String (i)]: number = i;
  }

  trace (number5);

  What I'm trying to create here is a series of variables called "Number 1", "Number2" and 'Number3', etc. Is there another way to do it? I need them to be public (I think that's the word?), so they can be used elsewhere in the script.

  I would appreciate any advice.

  Try this:

  for(var i : Number = 1; i < 10; i++)
  {
      this["number" + i.toString()] = i;
  }
  trace(number1); // will output 1
  

  

• How to create dynamic LINE tag XML

  I have a procedure as follows:
  create or replace procedure show_xml (v_xml ON clob) AS
  qryCtx DBMS_XMLGEN.ctxHandle;
  v_query varchar2 (2000);
  Start
  v_query: ='SELECT case_id, status, resolution of t_cases where rownum < 4';
  qryCtx: = dbms_xmlgen.newContext (v_query);
  -the value of the row header to be cases
  DBMS_XMLGEN.setRowTag (qryCtx, 'Case');
  -now to get the result
  v_xml: = DBMS_XMLGEN.getXML (qryCtx);
  dbms_xmlgen.closeContext (qryCtx);
  END;
  
  After running the procedure header line will be "box. Can we define the header of the row that contains dynamic content somehow.
  For example I need the output as shown below:
  
  <? XML version = "1.0"? >
  rowset <>
  < case extensible index = "1" >
  < CASE_ID > 970200 < / CASE_ID >
  < STATUS > CLO
  SED < / STATUS >
  < RESOLUTION > Load Off reserved < / RESOLUTION >
  < / Body >
  < case extensible index '2' = >
  < CA
  SE_ID > 970670 < / CASE_ID >
  CLOSED < status > < / STATUS >
  Immediate rejection < RESOLUTION > <
  / RESOLUTION >
  < / Body >
  < case extensible index '3' = >
  < CASE_ID > 980030 < / CASE_ID >
  CLOSED < status > < / STAT
  U.S. >
  Avoidance Total < RESOLUTION > < / RESOLUTION >
  < / Body >
  < / LINES >
  
  We do anyway?

  Why use the PL/SQL, when a single SQL statement is all that is needed to generate the XML?
  H3. Optimize SQL. Minimize the PL/SQL.

  SQL> select
    2          xmlRoot(
    3                  xmlElement( "RowSet",
    4                          xmlAgg(
    5                                  xmlElement( "case",
    6                                          xmlAttributes( rownum as "repeating_index" ),
    7                                          xmlForest(
    8                                                  object_name,
    9                                                  object_type
   10                                          )
   11                                  )
   12                          )
   13                  ),
   14                  VERSION '1.1',
   15                  STANDALONE YES
   16          )                               as XML
   17  from       user_objects
   18  where      rownum < 4
   19  /
  
  XML
  ----------------------------------------------------------------------------
  
  
    
      INSERTEMP
      PROCEDURE
    
    
      EMMP
      TABLE
    
    
      FOO
      TABLE PARTITION
    
  
  
  SQL>      
  

• How to create a variables nested within ODI?

  Dear all,
  
  I am facing problems by assigning a value to the variable value in ODI.
  
  I try to use the Variable nested... Lets say I have a RootFolder variable, which has a value of c:\ODIIntegration.
  
  Now, I want to use this value in another ArchiveFolder variable that must be set to RootFolder\Archive (c:\ODIIntegration\Archive).
  
  When you declare the variable I the value assigned to the variable ArchiveFolder as below, but it doesn't work and I get no error.
  
  #RootFolder\Archive
  
  Please guide me to use the variable correctly.
  
  Pointers would be much appreciated.
  
  Kind regards
  
  Manmohan Sharma

  Hello

  Enter your PROJECT CODE when calling the variable.

  In your case
  Variable ArchiveFolder = #. RootFolder\Archive

  If variable RootFolder is a GLOBAL variable then
  Variable ArchiveFolder = #GLOBAL. RootFolder\Archive

  Thank you
  Fati

• How to create a variable that gets + 1 or - 1 according to clicks?

  I don't know what to look for.  Is there a way to define an invisible flash variable so as to keep the score?

  The best way I can describe it comes from the BASE language I used to use back in the day, where you can click on x = x + 1 or x = x-3, or what function of the button click you.  And then it would display the score (i.e., just what is the current value of x) in the corner?

  I guess the simplest way that could help me to give me a link or the actual code you EF to a single button that will add or subtract a score displayed in the corner.

  My knowledge of ActionScript is very limited... I know that what I have copy - paste for my purposes of line.

  Thank you!

  However, whenever you plan to display the value you can use...

  textFieldName.text = String (someVariable);

  where textFieldName is any instance name assign you to the TextField object

  Please mark this ad as answered if you can.

• How to create a sidecar.xml file?

  Hello - I used generator sidecar very rad Johannes and instructions from adobe on how to download the file, but can't seem to make it work. I have a feeling that it's because they both start with a hypothesis:

  "Use a text editor or an XML Editor to create a file sidecar.xml..." »

  "Writing in a sidecar.xml file.

  How to create the file sidecar.xml of origin, in which paste the metadata generated by Johannes tool?

  http://projects.nordsueddesign.de/sidecarxml/#

  http://help.Adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60606c7754128c7a9c00e-7F ff.html

  You use the web interface of the xmlsidecar generator made by Johannes Henseler and push the button it "generate". Copy paste in a plain text file and then replace tex extension txt to xml format. This is how you do a sidecar.xml the easy way.

  Subsequently, yo have to import "multiple files" (or "multiple files"... my DPS is a Spanish) Folio Builder.

  If the folder revolve correctly, folio Builder will start to swallow the sidecar data and download articles.

  This time, while posting, my pc did this with a hundred articles. As happy and busy as a Beaver in heat

  Gustavo (detachment of Madrid)