How to create the variable diagonal line pattern in CS6?
Hi guys
I'm at the edge of madness with the creation of my pattern of diagonal lines. I've tried everything I can think of, but the boss is an absolute mess! I want to create a pattern of diagonal lines, but I want the lines to not be uniform. Basically, I had a group of 3 lines and then a separate line on its own, then repeating this like the image below. I used the function of distributing the distances between the lines is the same everywhere. I then turned the all exactly 45 degrees and aligned with the lines to fit in the bounding box in the mode 'as the motive"as shown. Yet, the resulting model is just a mess of the ugliness of overlap. Can all that I want is the model literally watch as it does in the picture on the left, someone you please tell me how to sucessfully this in CS6? Would be eternally grateful!
Never create a line pattern obliquely. It is not necessary.
Create the model at 90 ° angle and then use object > transform > Rotate and check the option "Transform Patterns" and enter the angle you are after...
Try to get the slanted lines to match a pattern can take a lot of effort. Where as with this method you can create the pattern and turn it in a few minutes. Let the Illustrator to work for you rather than against you. And, you can rotate to any angle, so the model will work in many ways.
Tags: Illustrator
Similar Questions
-
How to remove the variable created when using definedNamedWhereClauseParam()
Hello
My Jdev version 11.1.1.7.0.
I'm Executive where clause programatically where I need to bind two bind parameters under certain conditions. Example, I have two bind variables X, Y.
Here's the problem:
Assume that the first time I'm setting one variable X, so I define X bind variable and execute the query.
What second time I send only Y but not X. In this implementation of the scenario of VO throw an exception, given that the variable X is already created in the VO object and where clause does not have this setting.
So how to remove variables created in the original Version all in definedNamedWhereClauseParam(). I need to erase what ever the previously created variable every time I execute method.
I can make the similar functionlity using setWhereClauseParam (using literals). But I have a few technical restrictions for use.
Could you please help me how to remove the variable before vo using definedNamedWhereClauseParam.
Caused by: java.sql.SQLException: try to set a parameter name that does not intervene in the SQL: itemNumber
at oracle.jdbc.driver.OraclePreparedStatement.setObjectAtName(OraclePreparedStatement.java:15969)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.setObjectAtName(OraclePreparedStatementWrapper.java:911)
at weblogic.jdbc.wrapper.PreparedStatement_oracle_jdbc_driver_OraclePreparedStatementWrapper.setObjectAtName (unknown Source)
at oracle.jbo.server.OracleSQLBuilderImpl.bindParamValue(OracleSQLBuilderImpl.java:4669)
at oracle.jbo.server.BaseSQLBuilderImpl.bindParametersForStmt(BaseSQLBuilderImpl.java:3687)
at oracle.jbo.server.ViewObjectImpl.bindParametersForCollection(ViewObjectImpl.java:22742)
at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:1298)
... more than 96
Thank you.
-Diette.
Published by: Vidya Diette on February 28, 2013 08:43Hello
You need access to the variable Manager. Order of reading in the JavaDocs:
http://docs.Oracle.com/CD/E28389_01/apirefs.1111/e10653/Oracle/JBO/ViewObject.html--> http://docs.oracle.com/cd/E28389_01/apirefs.1111/e10653/oracle/jbo/VariableManagerOwnerBase.html#getVariableManager%28%29--> http://docs.oracle.com/cd/E28389_01/apirefs.1111/e10653/oracle/jbo/VariableValueManager.html--> http://docs.oracle.com/cd/E28389_01/apirefs.1111/e10653/oracle/jbo/VariableManager.html#removeVariable%28java.lang.String%29
Frank
-
How to get rid of the blue diagonal lines on my calendar?
If it is a nested sequence, it could be that the media is shorter than the time on the timeline.
It would also be as entry points and are resolved to make it shorter.
Make sure that the tracks are not locked.
If not those, then:
See if Ann suggested here helps:
Lack of chronology - help video
See here, too:
-
How to create unique variables for... in loop? (AS2)
Hello
I have a function onEnterFrame controlling all the movie clips in a table. The movement of each of these clips is controlled by a few variables - speed, acceleration, etc - that are changed on every enterFrame. I can't understand how to create unique variables for each element of the array. Now my variables are the same for all elements, and therefore the proposals of each video clip are the same.
I used this code to add my video clips in the table:
for (i = 0; i < starNumber; i ++) {}
duplicateMovieClip (star, "star" + I, i);
starArray.push (this ["star" + String (i)]);
}I do a similar thing to create unique variables for each? Or is there something I need to do my loop (myClip in myArray) which is contained in my onEnterFrame function?
I can post my code if that would help (65 lines).
Creating unique variables is easy way out. Here's the modified code using unique variables that should solve your problem:
var i: Number;
var starArray:Array = [];
var starArray_X:Array = [];
var starArray_Y:Array = [];
var mc:String;
var scale: number;
var speedXMod:Number;
var speedYMod:Number;
var starNumber:Number = 10;
var minSize:Number = 15;
var maxSize:Number = 80;
var speed: number = 0.2;
var minSpeed:Number = 0;
var maxSpeed:Number = 1;
for (i = 0; i< starnumber;="">
duplicateMovieClip (star, "star" + I, i);
starArray.push (this ["star" + String (i)]);
}
(MC starArray) {}
starArray [mc] ._x = (Math.Random () * Stage.width);
starArray [mc] ._y = (Math.Random () * Stage.height);
scale = (minSize + (Math.Random () * (maxSize - minSize)));
._xscale starArray [mc] = scale;
starArray [mc] ._yscale = scale;
var startSpeedX:Number = ((Math.pow (-1, (Math.round (Math.random ())) * (minSpeed + (Math.Random () * (maxSpeed - minSpeed)));)))
var startSpeedY:Number = ((Math.pow (-1, (Math.round (Math.random ())) * (minSpeed + (Math.Random () * (maxSpeed - minSpeed)));)))
[mc] starArray_X = startSpeedX;
[mc] starArray_Y = startSpeedY;
onEnterFrame = function() {}
(MC starArray) {}
speedXMod = ((Math.random () * acceleration)-(0,5 * accélération));
speedYMod = ((Math.random () * acceleration)-(0,5 * accélération));
If (((Math.abs (starArray_X [mc] + speedXMod)) < maxspeed)="" &&="" ((math.abs(stararray_x[mc]="" +="" speedxmod))=""> minSpeed)) {}
[mc] starArray_X += speedXMod;
} else {}
[mc] starArray_X = speedXMod;
}
If (((Math.abs (starArray_Y [mc] + speedYMod)) < maxspeed)="" &&="" ((math.abs(stararray_y[mc]+="" speedymod))=""> minSpeed)) {}
[mc] starArray_Y += speedYMod;
} else {}
[mc] starArray_Y = speedYMod;
}
If (((starArray [mc]._x + starArray_X[mc]) > 0) & ((starArray [mc]._x + starArray_X[mc])))<>
starArray [mc] ._x += starArray_X [mc];
} else {}
starArray_X [mc] * = - 1;
starArray [mc] ._x += starArray_X [mc];
}
If (((starArray [mc]._y + starArray_Y[mc]) > 0) & ((starArray [mc]._y + starArray_Y[mc])))<>
starArray [mc] ._y += starArray_Y [mc];
} else {}
starArray_Y [mc] * = - 1;
starArray [mc] ._y += starArray_Y [mc];
}
}
}
}
-
How we use the variable checkbox?
I use Cap 8. Finally, I want to set a variable to store the user's decision to play any narration automatically, or do not play automatically narration.
A check box appears as a perfect way to let the user make this decision, so I used the box widget to display only a single checkbox. Successfully, I set the text property of checkbox and entered a unique variable name (myNarrationDefault) to store the State of the checkbox. Now how to access the variable?
I added a text field, so I could see the value of this variable. However, when I try to insert a variable, I don't see the new user variable, in the list. Then I tried to add an action to a button just to see if the variable appears in the tool; There can be no.
I'm doing something wrong?
Thank you
Pete
In fact, you will need to create so that the variable you made in the interaction interface, CP does not do it for you, project/Variables in the top Menu.
When the box is checked, the value is then assigned to the variable.
-
How to create the column of the table for long-form Master detail relationship
Apex 4.1
Oracle 11g
I created a form master detail and see the main table hotel_list and table hotel_mapping as detailed below.
Hotel_list
ID HOTEL_NAME
1 Holiday Inn
Hotel Hilton 2
Hotel_mapping
ID HOTEL_NAME MAPPING_NAME
1 Inn Holiday Inn Select hotel
2 holiday hotel Holiday Inn Select
3 hotel Holiday Inn Holiday Inn Hotel
4 Hilton Hotel Hilton Hotel chain
Hotel Hilton 5 HiltonHotel
Table Hotel_name Hotel_list is a linked table Hotel_mapping
When I add a line to the Hotel_mapping table for the selected row in the hotel_list table, mapping_name of column is null, therefore impossible to create the relationship between the main table and the secondary table.
I would like to know, how to create the relationship?
Thank you very much
Best regards
Yong Huang,
simple step see creating a form detailed master with APEX - Assistant Master retail
and check how to maintain the relationship between two tables,
simple return the packaged application «Sample of Masters details»
and try to understand this concept...
In your example, use Hotel_list.ID as a foreign key in the table Hotel_mapping
and maintain the relationship with the column ID...
and choose the display type of the column Hotel_list.ID in table Hotel_mapping as List(Query Based LOV) select.
otherwise the best way is to create sample on oracle.apex.com
I hope this helps...
Leave.
-
How to create the outline of the shape
How to create the outline of a shape, solid, dashed, or dotted, for example an empty rectangle or circle.
Something like these:
I need are blank lines, empty interiors, which is transparent.
Thank you
If you use CS2, you can use the layer style > stroke and adjust the opacity of fill to 0. It would be more difficult to make a dotted line. Most likely, you will need to create a mask for this.
-
Please show or ask how to create the value of arrayOfValues of setValuesAtTimes parameter?
Hello AEScriptComm,
I have a few small scripts that use the method setValueAtTime successfully placing a keyframe on the existing layers of maskPath, but as you can see in the scripts below, results of setValueSatTimeS errors using IE: "Array is not of the correct type", "value is not an array" or "Null is not an object", depending on ,...
(A) what variable is used as the value of parameter IE:
.maskPath;
. maskPath.value;
. maskPath.value.vertices
(B) what kind of table is used as the parameter value as in:
var addTheseKeys = new Array ((1,2,3,4); (as a parameter of the time)...
(with either)
var keyValues = new Array([10,10],[100,100],[15,50],[100,120]); ...." ]) "
(GOLD)
var keyValues = [[10.10], [100 100], [15.50], [100 120]]; ... (Array of arrays? RE: " ]] " )
I just read a 'push' of the values in a table may be necessary?, but I was hoping someone who knew setValuesAtTimes could show it please...
1) .. How to create the value of arrayOfValues of setValuesAtTimes parameter?
1 (a): WORK setValueAtTime script...
App.Project.Item (1) .layer (1).property("Masks").property ("mask 1");
var app.project.item = myProperty (1) .layer (1) .mask (1) .maskPath;
myShape = app.project.item (1) .layer (1) .mask (1).maskPath.value;
myProperty.setValueAtTime(1.0,myShape);
1 (b): If there is no script setValuesAtTimes...
prop1 = app.project.item var (1) .layer (1).property("ADBE_Transform_Group").property ("ADBE Position");
var fourKeys = 4;
var addTheseKeys = new Array (1,2,3,4),
var keyValues = new Array (10, [10], [100 100], [15.50], [100 120]);
var app.project.item = myProperty (1) .layer (1) .mask (1) .maskPath;
myShape = app.project.item (1) .layer (1) .mask (1).maskPath.value;
var myVertices = app.project.item (1) .layer (1) .mask (1).maskPath.vertices;
myProperty.setValuesAtTimes (keyValues, addTheseKeys);
app.beginUndoGroup ("Keys");
~ for (var k = 0; k < fourKeys; k ++)
//~ {
~ prop1.setValueAtTime (keyValues [k], addTheseKeys [k]);
//~ }
myProperty.setValuesAtTimes (keyValues, addTheseKeys);
app.endUndoGroup ();
.. Thanks for any advise\suggestions,
J
(A). maskPath.value; It's always a Shape(). (maskPath is a property, not of a shape on its own, and maskPath.value.vertices is only a part of the shape data).
(B) nothing of what you propose... that is why your failed script fails.
var keyValues = new Array([10,10],[100,100],[15,50],[100,120]); and
var keyValues = [[10.10], [100 100], [15.50], [100 120]]; are just as good as arrays of points, the only thing is that keyValues are arrays of objects Shape().
Read the guide and script for how to report a form of this post (just wrote it...): http://forums.adobe.com/thread/1419866?tstart=0
Your keyValues array should look like this: [keyValues0, keyValues1, keyValues2, keyValues3], where each entry is a Shape().
Xavier.
-
How to create Global Variables in Essbase
Hi gurus,
In essbase automation, I saw generally the statement below.
Connection $1 identified by $2 $ 3;
and of course many other statements also.
1. now, my question is where and how can we create the variables ($1, $2 and $3).
2. they are Substitutinal Variables or Environment Variables.
Pls let me know in detail how to create and define the variables above.
I tried to create them as variables indirect in environmental assessments, but when you run the maxl order Login $1 $ 2 $3 its saying this $1.. variable cannot find etc.They are variable positional parameter and are passed in a maxl script, you can read all about it at:-http://download.oracle.com/docs/cd/E12825_01/epm.111/esb_techref/maxl_syntax_vars.htm#syntax_techref_proj_maxl_ddl_utils_shell_d0e227
See you soon
John
http://John-Goodwin.blogspot.com/ -
can any 1 tell me how to create the budget journal and how to enter in the journal?
Hi all+.
Can someone tell me how to create the budget journal and how to enter in the journal to this budget? +
What about+.
Yasser+.http://download.Oracle.com/docs/CD/A60725_05/HTML/comnls/us/GL/budjrnl.htm#index-budget-journals-entering--0
Enter budget reviews in order to maintain an audit trail for your budget balances. You can use budget rules to automatically calculate the amounts of budget journal.
When you post journals budget, amounts of newspaper to date of existing fiscal balances. You can view and change your budget logs before posting.ATTENTION: When you use budget rules in fashion newspaper, big book calculates the appropriate flow or necessary to achieve the balance that you enter for the type of credit account.
Prerequisites
1. set a budget
2. open one or more years for your budget
3. set a budget organization
4 assign the budget input type 'Enter' for the accounts for which you want to enter budget reviewsTo enter budget for a journals only account:
1. go to the window enter Budget sheets.
2. specify the Organization of the Budget for the account with which you want to budget. If the budget organization is protected by password, you must enter the password before you can enter budget reviews.
3. Enter the Budget that you want to update. You cannot use a budget that is frozen.
4. Enter the range of accounting periods, to which budget.
5. enter in the currency of the budget amounts that you enter. The accounts must be assigned to the Organization of the budget for this currency.
6. choose the Mode of Journal in the region poplist to enter budget amounts in a newspaper format.
You can also use the single-line Mode or Mode worksheet to enter the amounts in the budget journal. However, you can only generate journals budget of these modes of entry when you use the window enter Budget sheets.
Additional information: when you use the log Mode, Type of Balance is a field display only. It displays Budget when you enter budget reviews. In the window to enter the newspapers, this field shows actual when you enter actual journals.7. Enter or question the account to which you want to budget. You can also switch mode worksheet to easily interrogate the accounts, then come back in fashion newspaper to enter budget reviews.
8. Enter an amount debit or credit for each period. Do not enter a journal amounts if you want to use fiscal rules to calculate and distribute the budget amounts.
9. choose Create magazines to create a budget spreadsheet. If you are using budget control, you specify an action of funds when you create the batch. -
Satellite P750 PSAY1A: how to create the recovery Toshiba on the new HARD drive partition
Hello
I have an old Toshiba Satellite P750 (PSAY1A-01Y022). I just upgraded my memory from 4 GB to 8 GB and am preparing to take my 500 GB HARD drive 1 TB. I had to order the disk online and wait to happen.
I always try to understand how to create the arrival of my new HARD drive Toshiba Recovery Partition. I do the same thing for an old book, I handled based on something similar to it's original factory State.
I have reflected on the recovery partition, but does not know how it was created. It is not NTFS. Does anyone have experience in the creation of a Toshiba Recovery on a new HARD drive Partition?
And the help is very appreciated.
Thanks and regards,
DineshRecovery partition can be created when you use the original Toshiba Recovery disk and install recovery image. Before the partitions to boot OS install will be automatically created, recovery image copied on a recovery and then partition as last step recovery image installation starts.
A sort of migration of files from one to the other HARD disk is not solution.
Only for laptop with factory will work and the usable recovery partition.
-
Do you know how to create the façade as a backdrop
Do you know how to create the façade as the Web, I mean like we did the word and click on it will be rather another process by clicking on the button.
If possible, I can click on the link in the table... No idea no matter who
In my view, that the user questioned a hyperlink control. See, for example: http://forums.ni.com/t5/LabVIEW/NI-Example-Finder-Like/m-p/1023011#M455994
You could probably do this in an XControl.
-
This question is more than 6 characters. I'm unable to move the black diagonal line preceding each video clip in WLMM, believe he is called to the toolbar. Sometimes when I left click it will move for me and sometimes it does not move or go anywhere. What I am doing wrong? In addition, there are a clip in particular that the toolbar will not pass through the play. Like the above, sometimes it works and sometimes not.
Hello
Given that the problem is related to Windows Live Movie Maker, I suggest that ask you your question in Windows Live Solution Center.
-
How to create the icon on the desktop just for SilverLight?
How to create the icon on the desktop just for SilverLight?
Hello
- Why is it you are wanting to create a shortcut?
Silverlight is a plugin for Internet Explorer and other browsers, Windows Media Center is to allow video playback which supports silverlight. You cannot create a shortcut for the same. -
How to create the usb flash disk to Reboot
How to create the reboot usb flash drive. If I want to do a recovery or restart the usb flash drive how to
Hello
read the google links
and make sure that your motherboard allows you to boot from USB
and if you talk about the recovery partition of computer manufacturers from the D: to a bootable flash drive, you can not do
Maybe you are looking for
-
Can someone help me please? I tried reseting this several times and it still does not
-
Satellite Pro L300 - Webcam driver open fail
Hello I have toshiba satellite pro L300 model PSLB1E and in theDevice Manager is not no matter what imaging device and the driver for the Toshiba Page is showing "driver open fail. "Restart the computer or cam" gears. I uninstalled the driver 10 time
-
Original title: identity of unknown folder During execution of the backup and maintenance on one of my computers (Windows xp home, sp3), I noticed a folder and the file that I can't identify. The name of the folder is cc68f6b7a7ca948eefb018f001 and
-
How to make a recovery disk or possibly to do a windows repair disk?
Compaq presario CQ60 notebook pc. Processor AMD Athlon dual-core QL-62. Microsoft windows vista version/version 6.0 service pack 2. 32 bit
-
Speakers not working do not correctly under Vista
DescriptionWindows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on i