How to create recovery discs?

Similar Questions

• Vista with XP Downgrade and none of the recovery disks - how to create recovery discs?

  Interesting - I also bought the Windows Vista Business (sticker that says so on the bottom of the T61) with the pre-load downgrade to Windows XP Professional.

  Recovery of product, I created discs, that the OP was advised, but did not notice any indication during the process of creating it was for Windows XP Professional which was preinstalled, the Windows Vista Professional (which is allowed and has a sticker on the bottom of the T61), or both. Anyone know?

  And if it's only for XP, so how can I get Windows Vista Business media to which the licence applies?

  
  

• How can I continue creating recovery discs?

  Hello! I just bought a HP Pavilion dv6-3011so, and told me to create recovery discs as soon as I had installed the computer. I read in the manual that I stopped the creation and that the next time I opened the Recovery Manager he asked me to continue and to insert the following DVD and so on.

  As it was getting late, I decided to stop creating and continue the next day (today), and I opened up to Recovery Manager. He didn't ask me to keep anything. I Googled it and couldn't find any information, not even on the HP website. I don't know if I should choose "Creating recovery discs" once again, but I think it will only begin to calculate how much Swedish I will need? Or it will not start calculating where I was when I interrupted the creation yesterday (I had just finished disc 2 of 6)? I don't want to do anything until I know for sure I do the right thing, because I feel that this can never be done again.

  Please help me!

  Hello

  If you restart recovery disc creation, it should carry from where you left off.

  Best wishes

  DP - K

• Satellite L500 - cannot create recovery discs - 0D00F6-49-00000001 error

  Hello

  My pc start up after that I did a system restore. For example, I can't use the function fn key.

  Last week I tried to format my pc. But when I opened the TOSHIBA Recovery Disc Creator got an untimely error 00000001-49-0D00F6.

  I've managed to create 2 4 DVDs. IM using Dvd - r from memorex.
  If anyone can help.

  Thanks in advance for your help.

  This is the first time that you try to create recovery discs?

  How you created 2 discs if the Toshiba recovery disc creator starts by mistake?

  Anyway, in this forum you will find similar topics. No doubt some recovery file is damaged, and the drive could not be created.
  I put t think that there is something that you can about it. Either it works or not. Maybe you should contact the nearest Toshiba service and explain the situation. I hope they can help you with this and disc Toshiba DVD original to order for you.

• Satellite A505-S6005: creating recovery discs power calibration error

  Hello

  just bought a satellite A505-S6005 and try to create recovery discs.
  I am using Dynex DVD - R.

  He created the 1st disk after the slightest mistake 2 times and when I started the 2nd drive continued to get again the message that is OE01BS-26 error Code - 2 said A 037303 power calibration area error occurred, check the disk for dirt or scratches.

  The disks are not scratched, and after going through 5-6 discs wonder if something is wrong with the optical drive & not the disks.

  Any help appreciated.
  Thank you.

  Hello

  I think it's a problem with your DVD media
  You are using incompatible disks!

  Try different DVD from different manufacturers.
  I m using the Verbatim or TDK DVD-R and my CD/DVD drive handles these discs without problem.

  Check it! I'm sure this will help you!

• Creating recovery disc for the VGN-NW220F laptop

  I followed the instructions and got the on-screen Vaio Care, but under "Recovery and restoration", there is no option to create recovery discs.

  When I clicked on your link to Vaio Care, I was taken to the Vaio Update options. I tried to install all of them, without success.

• How to create a disc of forgotten password if you must have the current password?

  

  It makes no sense at all.  How to create a disc of forgotten password if you must have the current password?  It works only if you have created this from the beginning? Thank you

  Original title: Assistant password

  "How to enable or disable the built-in high administrator in Windows 7 account '

  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  'Activate the administrator account (hidden) on Windows 7, 8, or Vistone '

  http://www.howtogeek.com/HOWTO/Windows-Vista/enable-the-hidden-administrator-account-on-Windows-Vista/

  See you soon.

• Possibility of creating recovery discs isn't available.

  I want to create recovery disks for my HP Pavillion 2260 - EA, Windows 7 64 bit, but the option is no longer available in my HP support Assistant. I selected the option once, but had to cancel because he wants more DVD discs I've owned. I then bought several discs. Now the option is no longer available for me to choose.

  In my view, we can only create recovery discs once. The PC noted, therefore, that I used this option, when in fact I've never really done. Can I do now?

  -Mike

  Hi, it is possible Action Center of this HPSA saw this task as completed and this is why it is not.  I recommend that you try to access the Recovery Manager through the start menu. If you select all programs from the start, you should see a list for safety and Protection, click on that and then click on Recovery Manager and finally, you should see a list for the creation of recovery media. Clicking on that brings you to the creation screen.

  If for some reason that there is no option, the only solution I know of "reset" of the option of creating media is to perform a recovery of HP sent a recovery media. Performing a restore partition recovery will not work.

  Hope this information helps. If you need help, please ask.

• Portege M500 - how to create recovery DVDs?

  Hi there :)

  I bought Toshiba Portege M500. Anyone know how to create a CD/DVD of recovery on this model?

  I installed the "recovery CD creator" but - I just can't create it. The only thing that came on the screen is: Qosmio Player recovery CD.

  On the help page - there are instructions to create the disk - but the options were not available to me. (i.e. the system recovery disc option)

  Help, please! I would really appreciate it!

  Sophie

  Hello

  Portege M500 was equipped with HARD drive recovery option?
  Did you find the information you need to create a recovery disk in the user's manual?

  Where did you find the "Toshiba recovery CD creator"?
  This tool has been pre-installed?

  I guess that there is no image on the HARD drive files that are needed to create the recovery disk Toshiba and so you can't create it.

• Re: Satellite A300 - error creating recovery disc

  I'm not really providing any solution, but is facing a similar problem with my laptop Satellite A300-1EI, bought in Dubai, UNITED Arab Emirates. I tried to make records of recovery through Toshiba Recovery Disc Creator. However, each time, I got an error message. I tried with Verbatim, Philips DVD-R and lost several DVDs. Meanwhile on the net surfing, I discovered that the engraver of DVD from Toshiba is a little sensitive and try to use Verbatim DVD - R brand. I tried with Verbatim 2 days and at the last moment when I was about to dance with joy that the first DVD is created, received an error like below

  * "The following issue occurred during the recording of the data of the disc.*
  Current process will be stopped.*

  * A power calibration area error occurred.*
  * Please check if the disc is scratched or dirty.*
  * If Yes, please try again with a new disc.*

  "* (Error code: 0E01B5-26-00037304)."

  I don't really understand the message. Can advise you on how to create the recovery disks.

  Kind regards
  Vijay

  Hello

  To me, it seems that the used DVD discs are not completely supported by ODD.
  It seems to be a compatibility issue.

  I had this problem in the past, but I could resolve it using another DVD from another manufacturer.
  I had a good experience with TDK DVD-R.
  Using the R disk I was able to burn the disc, but using the + R I received an error message.

  See you soon

• How to create recovery CDs Qosmioplayer on Qosmio G35

  I just bought a G35 "re-certified factory". I know that it is an American model, but American support site doesn't have a forum this good.
  Apparently, the Qosmio G35-AV600 model, it is not possible to create a recovery Qosmio player once CD DVD recovery Qosmio has been used to restore the software 'image' on the computer's hard disk drive. If I try to create a the Qosmio player recovery CD, the computer ejects the blank CD, and the following error message will appear:

  «File has been deleted or co...» "

  This is because the utility program that creates the Qosmio player recovery CD is not reinstalled by the Qosmio Recovery DVD, even if all other software is reinstalled successfully.
  The laptop came with a recovery qosmioplayer CD. I downloaded the "Qosmio Player Utility for Windows XP" on the following Web site:

  http://askiris.Toshiba.com/

  All he seemed to do was run installshield (XP) and unzip some files on the 'c' drive, but who has still no effect. Apart from asking Toshiba to send me the recovery disc, is there something I can do?

  Hello Slim

  Toshiba laptops we are not known to me and I put also t know how they are delivered, but I can give you some info on European Qosmio models.

  Each laptop Qosmio (G30 as well) comes with recovery media (recovery media Qosmioplayer and Recovery DVD for the installation of the OS). Because of this, it is not possible to create any recovery media. Qosmioplayer is not part of the operating system and not installed on the Windows partition.

  Qosmioplayer is Linux based on reader and pre-installed on some unpartitioned HARD disk. AFAIK utility Qosmioplayer is created to import films registered in the Windows operating system to allow watching, editing and also save them on CD or DVD.

  The fact is that you cannot create Qosmioplayer recovery on your own media. I'm sure that the American units are designed and pre-installed on a same or similar principle.

  Good bye

• create recovery discs

  I'm trying to create a set of recovery disc for my office after the restoration of the Vista system with a set of HP recovery disks.  It crosses the 1st disk, but when he goes through the verification process I get an error message that says: there was an error writing to the disk.  I use a single disk DVD writing.  These discs have worked on another of my systems, then why do they will not work on this system?  This happened with 2 discs now, so how to solve this problem?

  = Order restore (recovery CD) online disks, yourself, without call HP. ===
  
  Follow these steps.
  
  1. go to the website of HP - www.hp.com/support.
  
  2. Select the country or region.
  
  3. we see - Support and drivers at the top > click on drivers and downloads of the software > enter product name/number.
  
  4. Select the operating system. > Click Next.
  
  5. at the bottom of the screen it would list available updated drivers and software for the computer.
  Among it, you would find an option of order recovery media if the disc is available with HP.
  
  6. click on the order recovery media > the page will be redirected to - software support and command pilot.
  
  7. enter serial number > click Next > enter the postal Code and the follow-up on the instructions on the screen.

• How to: burn recovery discs.

  so I know that my registry is not the way it should be. I can't install some programs or burn cd using WMP and some other things.
  Ive had this laptop a few years and letting people to use it.

  I want to make recovery disks because my laptop did not come with any. but I can't create all disks because I know that my record is bad.
  I know that they are not a legitimate registry fixer, so I can't do that.

  If I can get a link to an ISO can I burn a Vista 64 bit and the recovery of my registry than?

  laptop is a Sony VGN-NW150J

  Hello Lobyone,

  As a recovery disk came with the product, you should have a recovery Partition.

  Recovery discs are made from the recovery partition, not of your working version of Vista.

  Ask Sony how the recovery disc for your system.

  In addition, if you want to reinstall Vista, back to the way you bought it, ask Sony to the key sequence to use to start the recovery process this recovery hard disk Partition.

  But that wipes everything.

  Vista operating system is still working, see if you can borrow a DVD of Vista from Microsoft (NOT a Recovery DVD Sony), a friend, etc. and do a repair upgrade Installation.

  Here's how this repair:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• SL500 new w / XP - failure internal error creating recovery disc

  I tried several times to create my Windows XP Recovery disk set (license is for Vista with downgrade to XP).  Whenever I get this error during extraction of the files operation: internal year error has caused this process to fail.  This occurs also during "create rescue media.  How can I fix?  Is there a file that can be downloaded?  I really need to create my discs of recovery, just in case... and I do NOT put upgraded to Vista.

  Any help or assistance will be greatly appreciated

  Ann

  Call lenovo support Office, explain your problem and ask you to send a Rescue and Recovery disk free.

• HP Pavilion g6-2320tx Notebook PC - recovery disc is scratched on the other creating recovery disc

  HP Pavilion g6-2320tx Notebook PC - recovery disc is scratched on the other how to create the 2nd recovery disk recovery disk

  Please contact the official support of HP in your region / country, HP support worldwide Portal, to see if the HP recovery support is available for your computer.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation